aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_bsg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_bsg.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_bsg.c196
1 files changed, 181 insertions, 15 deletions
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b905dfe5ea6..3a024838850 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -483,6 +483,98 @@ done:
return rval;
}
+/* Set the port configuration to enable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_set_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+ uint16_t *new_config)
+{
+ int ret = 0;
+ int rval = 0;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(ha))
+ goto done_set_internal;
+
+ new_config[0] = config[0] | (ENABLE_INTERNAL_LOOPBACK << 1);
+ memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+ ha->notify_dcbx_comp = 1;
+ ret = qla81xx_set_port_config(vha, new_config);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Set port config failed\n",
+ __func__, vha->host_no));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_set_internal;
+ }
+
+ /* Wait for DCBX complete event */
+ if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "State change notificaition not received.\n"));
+ } else
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "State change RECEIVED\n"));
+
+ ha->notify_dcbx_comp = 0;
+
+done_set_internal:
+ return rval;
+}
+
+/* Set the port configuration to disable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_reset_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+ int wait)
+{
+ int ret = 0;
+ int rval = 0;
+ uint16_t new_config[4];
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(ha))
+ goto done_reset_internal;
+
+ memset(new_config, 0 , sizeof(new_config));
+ if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
+ ENABLE_INTERNAL_LOOPBACK) {
+ new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK;
+ memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+ ha->notify_dcbx_comp = wait;
+ ret = qla81xx_set_port_config(vha, new_config);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Set port config failed\n",
+ __func__, vha->host_no));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ }
+
+ /* Wait for DCBX complete event */
+ if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
+ (20 * HZ))) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "State change notificaition not received.\n"));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ } else
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "State change RECEIVED\n"));
+
+ ha->notify_dcbx_comp = 0;
+ }
+done_reset_internal:
+ return rval;
+}
+
static int
qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
{
@@ -494,6 +586,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
char *type;
struct msg_echo_lb elreq;
uint16_t response[MAILBOX_REGISTER_COUNT];
+ uint16_t config[4], new_config[4];
uint8_t *fw_sts_ptr;
uint8_t *req_data = NULL;
dma_addr_t req_data_dma;
@@ -568,29 +661,102 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
- if (ha->current_topology != ISP_CFG_F) {
- type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ if ((ha->current_topology == ISP_CFG_F ||
+ (IS_QLA81XX(ha) &&
+ le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE
+ && req_data_len == MAX_ELS_FRAME_PAYLOAD)) &&
+ elreq.options == EXTERNAL_LOOPBACK) {
+ type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld) bsg rqst type: %s\n",
- vha->host_no, type));
-
- command_sent = INT_DEF_LB_LOOPBACK_CMD;
- rval = qla2x00_loopback_test(vha, &elreq, response);
+ "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
+ command_sent = INT_DEF_LB_ECHO_CMD;
+ rval = qla2x00_echo_test(vha, &elreq, response);
+ } else {
if (IS_QLA81XX(ha)) {
+ memset(config, 0, sizeof(config));
+ memset(new_config, 0, sizeof(new_config));
+ if (qla81xx_get_port_config(vha, config)) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Get port config failed\n",
+ __func__, vha->host_no));
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+
+ if (elreq.options != EXTERNAL_LOOPBACK) {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "Internal: current port config = %x\n",
+ config[0]));
+ if (qla81xx_set_internal_loopback(vha, config,
+ new_config)) {
+ bsg_job->reply->reply_payload_rcv_len =
+ 0;
+ bsg_job->reply->result =
+ (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+ } else {
+ /* For external loopback to work
+ * ensure internal loopback is disabled
+ */
+ if (qla81xx_reset_internal_loopback(vha,
+ config, 1)) {
+ bsg_job->reply->reply_payload_rcv_len =
+ 0;
+ bsg_job->reply->result =
+ (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+ }
+
+ type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s\n",
+ vha->host_no, type));
+
+ command_sent = INT_DEF_LB_LOOPBACK_CMD;
+ rval = qla2x00_loopback_test(vha, &elreq, response);
+
+ if (new_config[1]) {
+ /* Revert back to original port config
+ * Also clear internal loopback
+ */
+ qla81xx_reset_internal_loopback(vha,
+ new_config, 0);
+ }
+
if (response[0] == MBS_COMMAND_ERROR &&
- response[1] == MBS_LB_RESET) {
+ response[1] == MBS_LB_RESET) {
DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing "
- "ISP\n", __func__, vha->host_no));
+ "ISP\n", __func__, vha->host_no));
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
+ qla2x00_wait_for_chip_reset(vha);
+ /* Also reset the MPI */
+ if (qla81xx_restart_mpi_firmware(vha) !=
+ QLA_SUCCESS) {
+ qla_printk(KERN_INFO, ha,
+ "MPI reset failed for host%ld.\n",
+ vha->host_no);
+ }
+
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ rval = -EIO;
+ goto done_free_dma_req;
}
+ } else {
+ type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s\n",
+ vha->host_no, type));
+ command_sent = INT_DEF_LB_LOOPBACK_CMD;
+ rval = qla2x00_loopback_test(vha, &elreq, response);
}
- } else {
- type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
- command_sent = INT_DEF_LB_ECHO_CMD;
- rval = qla2x00_echo_test(vha, &elreq, response);
}
if (rval) {
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-25 03:45:54 +0000