diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 103 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 200 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_history.txt | 334 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 18 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 65 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 134 |
6 files changed, 805 insertions, 49 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 7bb2ece8b2e..f9f6c083927 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.11 + * mpi2.h Version: 02.00.12 * * Version History * --------------- @@ -45,6 +45,13 @@ * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. * Moved LUN field defines from mpi2_init.h. * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. + * In all request and reply descriptors, replaced VF_ID + * field with MSIxIndex field. + * Removed DevHandle field from + * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those + * bytes reserved. + * Added RAID Accelerator functionality. * -------------------------------------------------------------------------- */ @@ -70,7 +77,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x0B) +#define MPI2_HEADER_VERSION_UNIT (0x0C) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -257,7 +264,7 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 DescriptorTypeDependent; /* 0x06 */ @@ -271,6 +278,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) +#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) @@ -279,7 +287,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 Reserved1; /* 0x06 */ @@ -293,7 +301,7 @@ typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 DevHandle; /* 0x06 */ @@ -306,7 +314,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 IoIndex; /* 0x06 */ @@ -315,14 +323,29 @@ typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR Mpi2SCSITargetRequestDescriptor_t, MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t; + +/* RAID Accelerator Request Descriptor */ +typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR { + U8 RequestFlags; /* 0x00 */ + U8 MSIxIndex; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 Reserved; /* 0x06 */ +} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + Mpi2RAIDAcceleratorRequestDescriptor_t, + MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t; + + /* union of Request Descriptors */ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { - MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; - MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; - MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; - MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; - U64 Words; + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; + U64 Words; } MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION, Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; @@ -333,19 +356,20 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 DescriptorTypeDependent1; /* 0x02 */ U32 DescriptorTypeDependent2; /* 0x04 */ } MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t; /* defines for the ReplyFlags field */ -#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) -#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) -#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) -#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) -#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) -#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) /* values for marking a reply descriptor as unused */ #define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) @@ -355,7 +379,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U32 ReplyFrameAddress; /* 0x04 */ } MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, @@ -368,10 +392,10 @@ typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 TaskTag; /* 0x04 */ - U16 DevHandle; /* 0x06 */ + U16 Reserved1; /* 0x06 */ } MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, Mpi2SCSIIOSuccessReplyDescriptor_t, @@ -382,7 +406,7 @@ typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U8 SequenceNumber; /* 0x04 */ U8 Reserved1; /* 0x05 */ @@ -397,7 +421,7 @@ typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U8 VP_ID; /* 0x02 */ U8 Flags; /* 0x03 */ U16 InitiatorDevHandle; /* 0x04 */ @@ -411,15 +435,28 @@ typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR #define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) +/* RAID Accelerator Success Reply Descriptor */ +typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /* 0x00 */ + U8 MSIxIndex; /* 0x01 */ + U16 SMID; /* 0x02 */ + U32 Reserved; /* 0x04 */ +} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + Mpi2RAIDAcceleratorSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t; + + /* union of Reply Descriptors */ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { - MPI2_DEFAULT_REPLY_DESCRIPTOR Default; - MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; - MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; - MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; - MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; - U64 Words; + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; + U64 Words; } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; @@ -458,6 +495,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ #define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ #define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ +#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/ @@ -555,12 +593,17 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) +/**************************************************************************** +* RAID Accelerator values +****************************************************************************/ + +#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0) /**************************************************************************** * IOCStatus flag to indicate that log info is available ****************************************************************************/ -#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) /**************************************************************************** * IOCLogInfo Types diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index 2f27cf6d6c6..ab47c467964 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.10 + * mpi2_cnfg.h Version: 02.00.11 * * Version History * --------------- @@ -95,6 +95,11 @@ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. * Added PortGroups, DmaGroup, and ControlGroup fields to * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. * -------------------------------------------------------------------------- */ @@ -723,6 +728,65 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) +/* IO Unit Page 5 */ + +/* + * Upper layer code (drivers, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumDmaEngines at runtime. + */ +#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES +#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */ + U64 RaidAcceleratorBufferSize; /* 0x0C */ + U64 RaidAcceleratorControlBaseAddress; /* 0x14 */ + U8 RAControlSize; /* 0x1C */ + U8 NumDmaEngines; /* 0x1D */ + U8 RAMinControlSize; /* 0x1E */ + U8 RAMaxControlSize; /* 0x1F */ + U32 Reserved1; /* 0x20 */ + U32 Reserved2; /* 0x24 */ + U32 Reserved3; /* 0x28 */ + U32 DmaEngineCapabilities + [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */ +} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, + Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t; + +#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) + +/* defines for IO Unit Page 5 DmaEngineCapabilities field */ +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) + +#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) +#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) +#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) +#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) + + +/* IO Unit Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Flags; /* 0x04 */ + U8 RAHostControlSize; /* 0x06 */ + U8 Reserved0; /* 0x07 */ + U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ + U32 Reserved3; /* 0x18 */ +} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, + Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t; + +#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) + +/* defines for IO Unit Page 6 Flags field */ +#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) + + /**************************************************************************** * IOC Config Pages ****************************************************************************/ @@ -1709,10 +1773,14 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 U64 ActiveZoneManagerSASAddress;/* 0x2C */ U16 ZoneLockInactivityLimit; /* 0x34 */ U16 Reserved1; /* 0x36 */ + U8 TimeToReducedFunc; /* 0x38 */ + U8 InitialTimeToReducedFunc; /* 0x39 */ + U8 MaxReducedFuncTime; /* 0x3A */ + U8 Reserved2; /* 0x3B */ } MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; -#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) +#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) /* values for SAS Expander Page 0 DiscoveryStatus field */ #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) @@ -1737,6 +1805,7 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) /* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) @@ -1944,6 +2013,133 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 #define MPI2_SASPHY1_PAGEVERSION (0x01) +/* SAS PHY Page 2 */ + +typedef struct _MPI2_SASPHY2_PHY_EVENT { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 PhyEventInfo; /* 0x04 */ +} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT, + Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t; + +/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY2_PHY_EVENT_MAX +#define MPI2_SASPHY2_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; + /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, + Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t; + +#define MPI2_SASPHY2_PAGEVERSION (0x00) + + +/* SAS PHY Page 3 */ + +typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 CounterType; /* 0x04 */ + U8 ThresholdWindow; /* 0x05 */ + U8 TimeUnits; /* 0x06 */ + U8 Reserved3; /* 0x07 */ + U32 EventThreshold; /* 0x08 */ + U16 ThresholdFlags; /* 0x0C */ + U16 Reserved4; /* 0x0E */ +} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, + Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t; + +/* values for PhyEventCode field */ +#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) + +/* values for the CounterType field */ +#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/* values for the TimeUnits field */ +#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/* values for the ThresholdFlags field */ +#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY3_PHY_EVENT_MAX +#define MPI2_SASPHY3_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig + [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, + Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t; + +#define MPI2_SASPHY3_PAGEVERSION (0x00) + + /**************************************************************************** * SAS Port Config Pages ****************************************************************************/ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt new file mode 100644 index 00000000000..65fcaa31cb3 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt @@ -0,0 +1,334 @@ + ============================== + Fusion-MPT MPI 2.0 Header File Change History + ============================== + + Copyright (c) 2000-2009 LSI Corporation. + + --------------------------------------- + Header Set Release Version: 02.00.12 + Header Set Release Date: 05-06-09 + --------------------------------------- + + Filename Current version Prior version + ---------- --------------- ------------- + mpi2.h 02.00.12 02.00.11 + mpi2_cnfg.h 02.00.11 02.00.10 + mpi2_init.h 02.00.07 02.00.06 + mpi2_ioc.h 02.00.11 02.00.10 + mpi2_raid.h 02.00.03 02.00.03 + mpi2_sas.h 02.00.02 02.00.02 + mpi2_targ.h 02.00.03 02.00.03 + mpi2_tool.h 02.00.03 02.00.02 + mpi2_type.h 02.00.00 02.00.00 + mpi2_ra.h 02.00.00 + mpi2_history.txt 02.00.11 02.00.12 + + + * Date Version Description + * -------- -------- ------------------------------------------------------ + +mpi2.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. + * In all request and reply descriptors, replaced VF_ID + * field with MSIxIndex field. + * Removed DevHandle field from + * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those + * bytes reserved. + * Added RAID Accelerator functionality. + * -------------------------------------------------------------------------- + +mpi2_cnfg.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. + * -------------------------------------------------------------------------- + +mpi2_init.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to + * Query Asynchronous Event. + * Defined two new bits in the SlotStatus field of the SCSI + * Enclosure Processor Request and Reply. + * -------------------------------------------------------------------------- + +mpi2_ioc.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. + * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. + * Added two new reason codes for SAS Device Status Change + * Event. + * Added new event: SAS PHY Counter. + * -------------------------------------------------------------------------- + +mpi2_raid.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * -------------------------------------------------------------------------- + +mpi2_sas.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * -------------------------------------------------------------------------- + +mpi2_targ.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to + * BufferPostFlags field of CommandBufferPostBase Request. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 10-02-08 02.00.03 Removed NextCmdBufferOffset from + * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. + * Target Status Send Request only takes a single SGE for + * response data. + * -------------------------------------------------------------------------- + +mpi2_tool.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. + * -------------------------------------------------------------------------- + +mpi2_type.h + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * -------------------------------------------------------------------------- + +mpi2_ra.h + * 05-06-09 02.00.00 Initial version. + * -------------------------------------------------------------------------- + +mpi2_history.txt Parts list history + +Filename 02.00.12 +---------- -------- +mpi2.h 02.00.12 +mpi2_cnfg.h 02.00.11 +mpi2_init.h 02.00.07 +mpi2_ioc.h 02.00.11 +mpi2_raid.h 02.00.03 +mpi2_sas.h 02.00.02 +mpi2_targ.h 02.00.03 +mpi2_tool.h 02.00.03 +mpi2_type.h 02.00.00 +mpi2_ra.h 02.00.00 + +Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 +---------- -------- -------- -------- -------- -------- -------- +mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 +mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06 +mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03 +mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06 +mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02 +mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 +mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02 +mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 +mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 + +Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 +---------- -------- -------- -------- -------- -------- -------- +mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 +mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 +mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 +mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 +mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 +mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 +mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 +mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 +mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index f1115f0f0eb..563e56d2e94 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2009 LSI Corporation. * * * Name: mpi2_init.h * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.06 + * mpi2_init.h Version: 02.00.07 * * Version History * --------------- @@ -23,6 +23,10 @@ * Control field Task Attribute flags. * Moved LUN field defines to mpi2.h becasue they are * common to many structures. + * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to + * Query Asynchronous Event. + * Defined two new bits in the SlotStatus field of the SCSI + * Enclosure Processor Request and Reply. * -------------------------------------------------------------------------- */ @@ -289,7 +293,11 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) -#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) + +/* obsolete TaskType name */ +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ + (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) /* MsgFlags bits */ @@ -375,6 +383,8 @@ typedef struct _MPI2_SEP_REQUEST #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) @@ -410,6 +420,8 @@ typedef struct _MPI2_SEP_REPLY #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 8c5d81870c0..c294128bdeb 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.10 + * mpi2_ioc.h Version: 02.00.11 * * Version History * --------------- @@ -79,6 +79,11 @@ * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. + * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. + * Added two new reason codes for SAS Device Status Change + * Event. + * Added new event: SAS PHY Counter. * -------------------------------------------------------------------------- */ @@ -261,6 +266,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY /* ProductID field uses MPI2_FW_HEADER_PID_ */ /* IOCCapabilities */ +#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) +#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) @@ -440,6 +447,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) +#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) /* Log Entry Added Event data */ @@ -502,17 +510,19 @@ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; /* SAS Device Status Change Event data ReasonCode values */ -#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) -#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) -#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) -#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) -#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) -#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) -#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) -#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) /* Integrated RAID Operation Status Event data */ @@ -822,6 +832,37 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) +/* SAS PHY Counter Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 PhyEventCode; /* 0x0C */ + U8 PhyNum; /* 0x0D */ + U16 Reserved2; /* 0x0E */ + U32 PhyEventInfo; /* 0x10 */ + U8 CounterType; /* 0x14 */ + U8 ThresholdWindow; /* 0x15 */ + U8 TimeUnits; /* 0x16 */ + U8 Reserved3; /* 0x17 */ + U32 EventThreshold; /* 0x18 */ + U16 ThresholdFlags; /* 0x1C */ + U16 Reserved4; /* 0x1E */ +} MPI2_EVENT_DATA_SAS_PHY_COUNTER, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, + Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; + +/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the + * PhyEventCode field + * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the + * CounterType field + * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the + * TimeUnits field + * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the + * ThresholdFlags field + * */ + + /**************************************************************************** * EventAck message ****************************************************************************/ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 2ff4e936bd3..007e950f7bf 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2009 LSI Corporation. * * * Name: mpi2_tool.h * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.02 + * mpi2_tool.h Version: 02.00.03 * * Version History * --------------- @@ -17,6 +17,7 @@ * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release * structures and defines. * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. * -------------------------------------------------------------------------- */ @@ -32,7 +33,10 @@ /* defines for the Tools */ #define MPI2_TOOLBOX_CLEAN_TOOL (0x00) #define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) #define MPI2_TOOLBOX_BEACON_TOOL (0x05) +#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) + /**************************************************************************** * Toolbox reply @@ -112,6 +116,77 @@ typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST /**************************************************************************** +* Toolbox ISTWI Read Write Tool +****************************************************************************/ + +/* Toolbox ISTWI Read Write Tool request message */ +typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + U8 DevIndex; /* 0x14 */ + U8 Action; /* 0x15 */ + U8 SGLFlags; /* 0x16 */ + U8 Reserved7; /* 0x17 */ + U16 TxDataLength; /* 0x18 */ + U16 RxDataLength; /* 0x1A */ + U32 Reserved8; /* 0x1C */ + U32 Reserved9; /* 0x20 */ + U32 Reserved10; /* 0x24 */ + U32 Reserved11; /* 0x28 */ + U32 Reserved12; /* 0x2C */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */ +} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + Mpi2ToolboxIstwiReadWriteRequest_t, + MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t; + +/* values for the Action field */ +#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01) +#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02) +#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03) +#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10) +#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11) +#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* Toolbox ISTWI Read Write Tool reply message */ +typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 DevIndex; /* 0x14 */ + U8 Action; /* 0x15 */ + U8 IstwiStatus; /* 0x16 */ + U8 Reserved6; /* 0x17 */ + U16 TxDataCount; /* 0x18 */ + U16 RxDataCount; /* 0x1A */ +} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY, + Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t; + + +/**************************************************************************** * Toolbox Beacon Tool request ****************************************************************************/ @@ -139,6 +214,61 @@ typedef struct _MPI2_TOOLBOX_BEACON_REQUEST #define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) +/**************************************************************************** +* Toolbox Diagnostic CLI Tool +****************************************************************************/ + +#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C) + +/* Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 SGLFlags; /* 0x0C */ + U8 Reserved5; /* 0x0D */ + U16 Reserved6; /* 0x0E */ + U32 DataLength; /* 0x10 */ + U8 DiagnosticCliCommand + [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x70 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi2ToolboxDiagnosticCliRequest_t, + MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t; + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* Toolbox Diagnostic CLI Tool reply message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 ReturnedDataLength; /* 0x14 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY, + MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY, + Mpi2ToolboxDiagnosticCliReply_t, + MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t; + + /***************************************************************************** * * Diagnostic Buffer Messages |