diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 200 |
1 files changed, 198 insertions, 2 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index 2f27cf6d6c6..ab47c467964 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.10 + * mpi2_cnfg.h Version: 02.00.11 * * Version History * --------------- @@ -95,6 +95,11 @@ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. * Added PortGroups, DmaGroup, and ControlGroup fields to * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. * -------------------------------------------------------------------------- */ @@ -723,6 +728,65 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) +/* IO Unit Page 5 */ + +/* + * Upper layer code (drivers, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumDmaEngines at runtime. + */ +#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES +#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */ + U64 RaidAcceleratorBufferSize; /* 0x0C */ + U64 RaidAcceleratorControlBaseAddress; /* 0x14 */ + U8 RAControlSize; /* 0x1C */ + U8 NumDmaEngines; /* 0x1D */ + U8 RAMinControlSize; /* 0x1E */ + U8 RAMaxControlSize; /* 0x1F */ + U32 Reserved1; /* 0x20 */ + U32 Reserved2; /* 0x24 */ + U32 Reserved3; /* 0x28 */ + U32 DmaEngineCapabilities + [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */ +} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, + Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t; + +#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) + +/* defines for IO Unit Page 5 DmaEngineCapabilities field */ +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) + +#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) +#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) +#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) +#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) + + +/* IO Unit Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Flags; /* 0x04 */ + U8 RAHostControlSize; /* 0x06 */ + U8 Reserved0; /* 0x07 */ + U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ + U32 Reserved3; /* 0x18 */ +} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, + Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t; + +#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) + +/* defines for IO Unit Page 6 Flags field */ +#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) + + /**************************************************************************** * IOC Config Pages ****************************************************************************/ @@ -1709,10 +1773,14 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 U64 ActiveZoneManagerSASAddress;/* 0x2C */ U16 ZoneLockInactivityLimit; /* 0x34 */ U16 Reserved1; /* 0x36 */ + U8 TimeToReducedFunc; /* 0x38 */ + U8 InitialTimeToReducedFunc; /* 0x39 */ + U8 MaxReducedFuncTime; /* 0x3A */ + U8 Reserved2; /* 0x3B */ } MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; -#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) +#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) /* values for SAS Expander Page 0 DiscoveryStatus field */ #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) @@ -1737,6 +1805,7 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) /* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) @@ -1944,6 +2013,133 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 #define MPI2_SASPHY1_PAGEVERSION (0x01) +/* SAS PHY Page 2 */ + +typedef struct _MPI2_SASPHY2_PHY_EVENT { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 PhyEventInfo; /* 0x04 */ +} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT, + Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t; + +/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY2_PHY_EVENT_MAX +#define MPI2_SASPHY2_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; + /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, + Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t; + +#define MPI2_SASPHY2_PAGEVERSION (0x00) + + +/* SAS PHY Page 3 */ + +typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 CounterType; /* 0x04 */ + U8 ThresholdWindow; /* 0x05 */ + U8 TimeUnits; /* 0x06 */ + U8 Reserved3; /* 0x07 */ + U32 EventThreshold; /* 0x08 */ + U16 ThresholdFlags; /* 0x0C */ + U16 Reserved4; /* 0x0E */ +} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, + Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t; + +/* values for PhyEventCode field */ +#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) + +/* values for the CounterType field */ +#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/* values for the TimeUnits field */ +#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/* values for the ThresholdFlags field */ +#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY3_PHY_EVENT_MAX +#define MPI2_SASPHY3_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig + [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, + Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t; + +#define MPI2_SASPHY3_PAGEVERSION (0x00) + + /**************************************************************************** * SAS Port Config Pages ****************************************************************************/ |