diff options
Diffstat (limited to 'drivers/scsi/megaraid')
| -rw-r--r-- | drivers/scsi/megaraid/mbox_defs.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/mega_common.h | 122 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_ioctl.h | 36 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.c | 421 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.h | 46 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mm.c | 67 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 92 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.h | 20 |
8 files changed, 474 insertions, 332 deletions
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index 3052869f51f..170399ef06f 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -748,7 +748,7 @@ typedef struct { /** - * private_bios_data - bios private data for boot devices + * struct private_bios_data - bios private data for boot devices * @geometry : bits 0-3 - BIOS geometry, 0x0001 - 1GB, 0x0010 - 2GB, * 0x1000 - 8GB, Others values are invalid * @unused : bits 4-7 are unused diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index b50e27e6602..26e1e6c5565 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -46,17 +46,17 @@ /** * scb_t - scsi command control block - * @param ccb : command control block for individual driver - * @param list : list of control blocks - * @param gp : general purpose field for LLDs - * @param sno : all SCBs have a serial number - * @param scp : associated scsi command - * @param state : current state of scb - * @param dma_dir : direction of data transfer - * @param dma_type : transfer with sg list, buffer, or no data transfer - * @param dev_channel : actual channel on the device - * @param dev_target : actual target on the device - * @param status : completion status + * @ccb : command control block for individual driver + * @list : list of control blocks + * @gp : general purpose field for LLDs + * @sno : all SCBs have a serial number + * @scp : associated scsi command + * @state : current state of scb + * @dma_dir : direction of data transfer + * @dma_type : transfer with sg list, buffer, or no data transfer + * @dev_channel : actual channel on the device + * @dev_target : actual target on the device + * @status : completion status * * This is our central data structure to issue commands the each driver. * Driver specific data structures are maintained in the ccb field. @@ -99,42 +99,42 @@ typedef struct { /** * struct adapter_t - driver's initialization structure - * @param dpc_h : tasklet handle - * @param pdev : pci configuration pointer for kernel - * @param host : pointer to host structure of mid-layer - * @param lock : synchronization lock for mid-layer and driver - * @param quiescent : driver is quiescent for now. - * @param outstanding_cmds : number of commands pending in the driver - * @param kscb_list : pointer to the bulk of SCBs pointers for IO - * @param kscb_pool : pool of free scbs for IO - * @param kscb_pool_lock : lock for pool of free scbs - * @param pend_list : pending commands list - * @param pend_list_lock : exlusion lock for pending commands list - * @param completed_list : list of completed commands - * @param completed_list_lock : exclusion lock for list of completed commands - * @param sglen : max sg elements supported - * @param device_ids : to convert kernel device addr to our devices. - * @param raid_device : raid adapter specific pointer - * @param max_channel : maximum channel number supported - inclusive - * @param max_target : max target supported - inclusive - * @param max_lun : max lun supported - inclusive - * @param unique_id : unique identifier for each adapter - * @param irq : IRQ for this adapter - * @param ito : internal timeout value, (-1) means no timeout - * @param ibuf : buffer to issue internal commands - * @param ibuf_dma_h : dma handle for the above buffer - * @param uscb_list : SCB pointers for user cmds, common mgmt module - * @param uscb_pool : pool of SCBs for user commands - * @param uscb_pool_lock : exclusion lock for these SCBs - * @param max_cmds : max outstanding commands - * @param fw_version : firmware version - * @param bios_version : bios version - * @param max_cdb_sz : biggest CDB size supported. - * @param ha : is high availability present - clustering - * @param init_id : initiator ID, the default value should be 7 - * @param max_sectors : max sectors per request - * @param cmd_per_lun : max outstanding commands per LUN - * @param being_detached : set when unloading, no more mgmt calls + * @aram dpc_h : tasklet handle + * @pdev : pci configuration pointer for kernel + * @host : pointer to host structure of mid-layer + * @lock : synchronization lock for mid-layer and driver + * @quiescent : driver is quiescent for now. + * @outstanding_cmds : number of commands pending in the driver + * @kscb_list : pointer to the bulk of SCBs pointers for IO + * @kscb_pool : pool of free scbs for IO + * @kscb_pool_lock : lock for pool of free scbs + * @pend_list : pending commands list + * @pend_list_lock : exclusion lock for pending commands list + * @completed_list : list of completed commands + * @completed_list_lock : exclusion lock for list of completed commands + * @sglen : max sg elements supported + * @device_ids : to convert kernel device addr to our devices. + * @raid_device : raid adapter specific pointer + * @max_channel : maximum channel number supported - inclusive + * @max_target : max target supported - inclusive + * @max_lun : max lun supported - inclusive + * @unique_id : unique identifier for each adapter + * @irq : IRQ for this adapter + * @ito : internal timeout value, (-1) means no timeout + * @ibuf : buffer to issue internal commands + * @ibuf_dma_h : dma handle for the above buffer + * @uscb_list : SCB pointers for user cmds, common mgmt module + * @uscb_pool : pool of SCBs for user commands + * @uscb_pool_lock : exclusion lock for these SCBs + * @max_cmds : max outstanding commands + * @fw_version : firmware version + * @bios_version : bios version + * @max_cdb_sz : biggest CDB size supported. + * @ha : is high availability present - clustering + * @init_id : initiator ID, the default value should be 7 + * @max_sectors : max sectors per request + * @cmd_per_lun : max outstanding commands per LUN + * @being_detached : set when unloading, no more mgmt calls * * * mraid_setup_device_map() can be called anytime after the device map is @@ -211,23 +211,23 @@ typedef struct { #define SCP2ADAPTER(scp) (adapter_t *)SCSIHOST2ADAP(SCP2HOST(scp)) -/** - * MRAID_GET_DEVICE_MAP - device ids - * @param adp - Adapter's soft state - * @param scp - mid-layer scsi command pointer - * @param p_chan - physical channel on the controller - * @param target - target id of the device or logical drive number - * @param islogical - set if the command is for the logical drive - * - * Macro to retrieve information about device class, logical or physical and - * the corresponding physical channel and target or logical drive number - **/ #define MRAID_IS_LOGICAL(adp, scp) \ (SCP2CHANNEL(scp) == (adp)->max_channel) ? 1 : 0 #define MRAID_IS_LOGICAL_SDEV(adp, sdev) \ (sdev->channel == (adp)->max_channel) ? 1 : 0 +/** + * MRAID_GET_DEVICE_MAP - device ids + * @adp : adapter's soft state + * @scp : mid-layer scsi command pointer + * @p_chan : physical channel on the controller + * @target : target id of the device or logical drive number + * @islogical : set if the command is for the logical drive + * + * Macro to retrieve information about device class, logical or physical and + * the corresponding physical channel and target or logical drive number + */ #define MRAID_GET_DEVICE_MAP(adp, scp, p_chan, target, islogical) \ /* \ * Is the request coming for the virtual channel \ @@ -271,10 +271,10 @@ typedef struct { #define ASSERT(expression) #endif -/* +/** * struct mraid_pci_blk - structure holds DMA memory block info - * @param vaddr : virtual address to a memory block - * @param dma_addr : DMA handle to a memory block + * @vaddr : virtual address to a memory block + * @dma_addr : DMA handle to a memory block * * This structure is filled up for the caller. It is the responsibilty of the * caller to allocate this array big enough to store addresses for all diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h index b8aa34202ec..706fa05a187 100644 --- a/drivers/scsi/megaraid/megaraid_ioctl.h +++ b/drivers/scsi/megaraid/megaraid_ioctl.h @@ -22,23 +22,23 @@ #include "mbox_defs.h" +/* + * console messages debug levels + */ +#define CL_ANN 0 /* print unconditionally, announcements */ +#define CL_DLEVEL1 1 /* debug level 1, informative */ +#define CL_DLEVEL2 2 /* debug level 2, verbose */ +#define CL_DLEVEL3 3 /* debug level 3, very verbose */ + /** * con_log() - console log routine - * @param level : indicates the severity of the message. - * @fparam mt : format string + * @level : indicates the severity of the message. + * @fmt : format string * * con_log displays the error messages on the console based on the current * debug level. Also it attaches the appropriate kernel severity level with * the message. - * - * - * consolge messages debug levels */ -#define CL_ANN 0 /* print unconditionally, announcements */ -#define CL_DLEVEL1 1 /* debug level 1, informative */ -#define CL_DLEVEL2 2 /* debug level 2, verbose */ -#define CL_DLEVEL3 3 /* debug level 3, very verbose */ - #define con_log(level, fmt) if (LSI_DBGLVL >= level) printk fmt; /* @@ -157,14 +157,14 @@ typedef struct uioc { /** * struct mraid_hba_info - information about the controller * - * @param pci_vendor_id : PCI vendor id - * @param pci_device_id : PCI device id - * @param subsystem_vendor_id : PCI subsystem vendor id - * @param subsystem_device_id : PCI subsystem device id - * @param baseport : base port of hba memory - * @param pci_bus : PCI bus - * @param pci_dev_fn : PCI device/function values - * @param irq : interrupt vector for the device + * @pci_vendor_id : PCI vendor id + * @pci_device_id : PCI device id + * @subsystem_vendor_id : PCI subsystem vendor id + * @subsystem_device_id : PCI subsystem device id + * @baseport : base port of hba memory + * @pci_bus : PCI bus + * @pci_dev_fn : PCI device/function values + * @irq : interrupt vector for the device * * Extended information of 256 bytes about the controller. Align on the single * byte boundary so that 32-bit applications can be run on 64-bit platform diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 7bac86dda88..04d0b6918c6 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,13 +10,13 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.9 (Jul 16 2006) + * Version : v2.20.5.1 (Nov 16 2006) * * Authors: - * Atul Mukker <Atul.Mukker@lsil.com> - * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> - * Manoj Jose <Manoj.Jose@lsil.com> - * Seokmann Ju <Seokmann.Ju@lsil.com> + * Atul Mukker <Atul.Mukker@lsi.com> + * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com> + * Manoj Jose <Manoj.Jose@lsi.com> + * Seokmann Ju * * List of supported controllers * @@ -107,6 +107,7 @@ static int megaraid_mbox_support_random_del(adapter_t *); static int megaraid_mbox_get_max_sg(adapter_t *); static void megaraid_mbox_enum_raid_scsi(adapter_t *); static void megaraid_mbox_flush_cache(adapter_t *); +static int megaraid_mbox_fire_sync_cmd(adapter_t *); static void megaraid_mbox_display_scb(adapter_t *, scb_t *); static void megaraid_mbox_setup_device_map(adapter_t *); @@ -137,7 +138,7 @@ static int wait_till_fw_empty(adapter_t *); -MODULE_AUTHOR("sju@lsil.com"); +MODULE_AUTHOR("megaraidlinux@lsi.com"); MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(MEGARAID_VERSION); @@ -146,7 +147,7 @@ MODULE_VERSION(MEGARAID_VERSION); * ### modules parameters for driver ### */ -/** +/* * Set to enable driver to expose unconfigured disk to kernel */ static int megaraid_expose_unconf_disks = 0; @@ -154,7 +155,7 @@ module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0); MODULE_PARM_DESC(unconf_disks, "Set to expose unconfigured disks to kernel (default=0)"); -/** +/* * driver wait time if the adapter's mailbox is busy */ static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT; @@ -162,7 +163,7 @@ module_param_named(busy_wait, max_mbox_busy_wait, int, 0); MODULE_PARM_DESC(busy_wait, "Max wait for mailbox in microseconds if busy (default=10)"); -/** +/* * number of sectors per IO command */ static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS; @@ -170,7 +171,7 @@ module_param_named(max_sectors, megaraid_max_sectors, int, 0); MODULE_PARM_DESC(max_sectors, "Maximum number of sectors per IO command (default=128)"); -/** +/* * number of commands per logical unit */ static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN; @@ -179,7 +180,7 @@ MODULE_PARM_DESC(cmd_per_lun, "Maximum number of commands per logical unit (default=64)"); -/** +/* * Fast driver load option, skip scanning for physical devices during load. * This would result in non-disk devices being skipped during driver load * time. These can be later added though, using /proc/scsi/scsi @@ -190,7 +191,7 @@ MODULE_PARM_DESC(fast_load, "Faster loading of the driver, skips physical devices! (default=0)"); -/** +/* * mraid_debug level - threshold for amount of information to be displayed by * the driver. This level can be changed through modules parameters, ioctl or * sysfs/proc interface. By default, print the announcement messages only. @@ -337,7 +338,7 @@ static struct device_attribute *megaraid_sdev_attrs[] = { * * Return value: * actual depth set - **/ + */ static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth) { if (qdepth > MBOX_MAX_SCSI_CMDS) @@ -369,8 +370,8 @@ static struct scsi_host_template megaraid_template_g = { * megaraid_init - module load hook * * We register ourselves as hotplug enabled module and let PCI subsystem - * discover our adaters - **/ + * discover our adapters. + */ static int __init megaraid_init(void) { @@ -405,7 +406,7 @@ megaraid_init(void) /** * megaraid_exit - driver unload entry point * - * We simply unwrap the megaraid_init routine here + * We simply unwrap the megaraid_init routine here. */ static void __exit megaraid_exit(void) @@ -421,12 +422,12 @@ megaraid_exit(void) /** * megaraid_probe_one - PCI hotplug entry point - * @param pdev : handle to this controller's PCI configuration space - * @param id : pci device id of the class of controllers + * @pdev : handle to this controller's PCI configuration space + * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the * PCI hotplug susbsytem. - **/ + */ static int __devinit megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -542,16 +543,15 @@ out_probe_one: /** - * megaraid_detach_one - release the framework resources and call LLD release - * routine - * @param pdev : handle for our PCI cofiguration space + * megaraid_detach_one - release framework resources and call LLD release routine + * @pdev : handle for our PCI cofiguration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all * its resources. * - * This routine is also called from the PCI hotplug system - **/ + * This routine is also called from the PCI hotplug system. + */ static void megaraid_detach_one(struct pci_dev *pdev) { @@ -615,9 +615,9 @@ megaraid_detach_one(struct pci_dev *pdev) /** * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA - * @param device : generice driver model device + * @pdev : generic driver model device * - * Shutdown notification, perform flush cache + * Shutdown notification, perform flush cache. */ static void megaraid_mbox_shutdown(struct pci_dev *pdev) @@ -643,10 +643,10 @@ megaraid_mbox_shutdown(struct pci_dev *pdev) /** * megaraid_io_attach - attach a device with the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Attach this device with the IO subsystem - **/ + * Attach this device with the IO subsystem. + */ static int megaraid_io_attach(adapter_t *adapter) { @@ -695,10 +695,10 @@ megaraid_io_attach(adapter_t *adapter) /** * megaraid_io_detach - detach a device from the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Detach this device from the IO subsystem - **/ + * Detach this device from the IO subsystem. + */ static void megaraid_io_detach(adapter_t *adapter) { @@ -722,13 +722,13 @@ megaraid_io_detach(adapter_t *adapter) /** * megaraid_init_mbox - initialize controller - * @param adapter - our soft state + * @adapter : our soft state * - * . Allocate 16-byte aligned mailbox memory for firmware handshake - * . Allocate controller's memory resources - * . Find out all initialization data - * . Allocate memory required for all the commands - * . Use internal library of FW routines, build up complete soft state + * - Allocate 16-byte aligned mailbox memory for firmware handshake + * - Allocate controller's memory resources + * - Find out all initialization data + * - Allocate memory required for all the commands + * - Use internal library of FW routines, build up complete soft state */ static int __devinit megaraid_init_mbox(adapter_t *adapter) @@ -779,33 +779,39 @@ megaraid_init_mbox(adapter_t *adapter) goto out_release_regions; } - // - // Setup the rest of the soft state using the library of FW routines - // + /* initialize the mutual exclusion lock for the mailbox */ + spin_lock_init(&raid_dev->mailbox_lock); - // request IRQ and register the interrupt service routine + /* allocate memory required for commands */ + if (megaraid_alloc_cmd_packets(adapter) != 0) + goto out_iounmap; + + /* + * Issue SYNC cmd to flush the pending cmds in the adapter + * and initialize its internal state + */ + + if (megaraid_mbox_fire_sync_cmd(adapter)) + con_log(CL_ANN, ("megaraid: sync cmd failed\n")); + + /* + * Setup the rest of the soft state using the library of + * FW routines + */ + + /* request IRQ and register the interrupt service routine */ if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid", adapter)) { con_log(CL_ANN, (KERN_WARNING "megaraid: Couldn't register IRQ %d!\n", adapter->irq)); + goto out_alloc_cmds; - goto out_iounmap; - } - - - // initialize the mutual exclusion lock for the mailbox - spin_lock_init(&raid_dev->mailbox_lock); - - // allocate memory required for commands - if (megaraid_alloc_cmd_packets(adapter) != 0) { - goto out_free_irq; } // Product info - if (megaraid_mbox_product_info(adapter) != 0) { - goto out_alloc_cmds; - } + if (megaraid_mbox_product_info(adapter) != 0) + goto out_free_irq; // Do we support extended CDBs adapter->max_cdb_sz = 10; @@ -874,9 +880,8 @@ megaraid_init_mbox(adapter_t *adapter) * Allocate resources required to issue FW calls, when sysfs is * accessed */ - if (megaraid_sysfs_alloc_resources(adapter) != 0) { - goto out_alloc_cmds; - } + if (megaraid_sysfs_alloc_resources(adapter) != 0) + goto out_free_irq; // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range @@ -920,10 +925,10 @@ megaraid_init_mbox(adapter_t *adapter) out_free_sysfs_res: megaraid_sysfs_free_resources(adapter); -out_alloc_cmds: - megaraid_free_cmd_packets(adapter); out_free_irq: free_irq(adapter->irq, adapter); +out_alloc_cmds: + megaraid_free_cmd_packets(adapter); out_iounmap: iounmap(raid_dev->baseaddr); out_release_regions: @@ -937,7 +942,7 @@ out_free_raid_dev: /** * megaraid_fini_mbox - undo controller initialization - * @param adapter : our soft state + * @adapter : our soft state */ static void megaraid_fini_mbox(adapter_t *adapter) @@ -967,12 +972,12 @@ megaraid_fini_mbox(adapter_t *adapter) /** * megaraid_alloc_cmd_packets - allocate shared mailbox - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue * all the commands. For IO based controllers, the mailbox is also regsitered * with the FW. Allocate memory for all commands as well. - * This is our big allocator + * This is our big allocator. */ static int megaraid_alloc_cmd_packets(adapter_t *adapter) @@ -1132,9 +1137,9 @@ out_free_common_mbox: /** * megaraid_free_cmd_packets - free memory - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * - * Release memory resources allocated for commands + * Release memory resources allocated for commands. */ static void megaraid_free_cmd_packets(adapter_t *adapter) @@ -1156,10 +1161,10 @@ megaraid_free_cmd_packets(adapter_t *adapter) /** * megaraid_mbox_setup_dma_pools - setup dma pool for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * setup the dma pools for mailbox, passthru and extended passthru structures, - * and scatter-gather lists + * Setup the dma pools for mailbox, passthru and extended passthru structures, + * and scatter-gather lists. */ static int megaraid_mbox_setup_dma_pools(adapter_t *adapter) @@ -1252,10 +1257,10 @@ fail_setup_dma_pool: /** * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * teardown the dma pool for mailbox, passthru and extended passthru - * structures, and scatter-gather lists + * Teardown the dma pool for mailbox, passthru and extended passthru + * structures, and scatter-gather lists. */ static void megaraid_mbox_teardown_dma_pools(adapter_t *adapter) @@ -1300,10 +1305,11 @@ megaraid_mbox_teardown_dma_pools(adapter_t *adapter) /** * megaraid_alloc_scb - detach and return a scb from the free list * @adapter : controller's soft state + * @scp : pointer to the scsi command to be executed * - * return the scb from the head of the free list. NULL if there are none - * available - **/ + * Return the scb from the head of the free list. %NULL if there are none + * available. + */ static scb_t * megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) { @@ -1337,11 +1343,11 @@ megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) * @adapter : controller's soft state * @scb : scb to be freed * - * return the scb back to the free list of scbs. The caller must 'flush' the + * Return the scb back to the free list of scbs. The caller must 'flush' the * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc. * NOTE NOTE: Make sure the scb is not on any list before calling this * routine. - **/ + */ static inline void megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) { @@ -1362,10 +1368,10 @@ megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) /** * megaraid_mbox_mksgl - make the scatter-gather list - * @adapter - controller's soft state - * @scb - scsi control block + * @adapter : controller's soft state + * @scb : scsi control block * - * prepare the scatter-gather list + * Prepare the scatter-gather list. */ static int megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) @@ -1435,10 +1441,10 @@ megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) /** * mbox_post_cmd - issue a mailbox command - * @adapter - controller's soft state - * @scb - command to be issued + * @adapter : controller's soft state + * @scb : command to be issued * - * post the command to the controller if mailbox is availble. + * Post the command to the controller if mailbox is available. */ static int mbox_post_cmd(adapter_t *adapter, scb_t *scb) @@ -1518,7 +1524,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb) * Queue entry point for mailbox based controllers. */ static int -megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) +megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { adapter_t *adapter; scb_t *scb; @@ -1548,15 +1554,15 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) } /** - * megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid - * firmware lingua - * @adapter - controller's soft state - * @scp - mid-layer scsi command pointer - * @busy - set if request could not be completed because of lack of + * megaraid_mbox_build_cmd - transform the mid-layer scsi commands + * @adapter : controller's soft state + * @scp : mid-layer scsi command pointer + * @busy : set if request could not be completed because of lack of * resources * - * convert the command issued by mid-layer to format understood by megaraid - * firmware. We also complete certain command without sending them to firmware + * Transform the mid-layer scsi command to megaraid firmware lingua. + * Convert the command issued by mid-layer to format understood by megaraid + * firmware. We also complete certain commands without sending them to firmware. */ static scb_t * megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) @@ -1937,9 +1943,9 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) /** * megaraid_mbox_runpendq - execute commands queued in the pending queue * @adapter : controller's soft state - * @scb : SCB to be queued in the pending list + * @scb_q : SCB to be queued in the pending list * - * scan the pending list for commands which are not yet issued and try to + * Scan the pending list for commands which are not yet issued and try to * post to the controller. The SCB can be a null pointer, which would indicate * no SCB to be queue, just try to execute the ones in the pending list. * @@ -2012,11 +2018,11 @@ megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q) /** * megaraid_mbox_prepare_pthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices + * Prepare a command for the scsi physical devices. */ static void megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, @@ -2060,12 +2066,12 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, /** * megaraid_mbox_prepare_epthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices. This rountine prepares - * commands for devices which can take extended CDBs (>10 bytes) + * Prepare a command for the scsi physical devices. This rountine prepares + * commands for devices which can take extended CDBs (>10 bytes). */ static void megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, @@ -2109,9 +2115,9 @@ megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, /** * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs - * @adapter - controller's soft state + * @adapter : controller's soft state * - * Interrupt ackrowledgement sequence for memory mapped HBAs. Find out the + * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the * completed command and put them on the completed list for later processing. * * Returns: 1 if the interrupt is valid, 0 otherwise @@ -2224,9 +2230,8 @@ megaraid_ack_sequence(adapter_t *adapter) /** * megaraid_isr - isr for memory based mailbox based controllers - * @irq - irq - * @devp - pointer to our soft state - * @regs - unused + * @irq : irq + * @devp : pointer to our soft state * * Interrupt service routine for memory-mapped mailbox controllers. */ @@ -2671,7 +2676,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) * the FW is still live, in which case the outstanding commands counter mut go * down to 0. If that happens, also issue the reservation reset command to * relinquish (possible) reservations on the logical drives connected to this - * host + * host. **/ static int megaraid_reset_handler(struct scsi_cmnd *scp) @@ -2823,11 +2828,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp) /** * mbox_post_sync_cmd() - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based - * controllers + * controllers. */ static int mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[]) @@ -2955,12 +2960,12 @@ blocked_mailbox: /** * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based * controllers. This is a faster version of the synchronous command and - * therefore can be called in interrupt-context as well + * therefore can be called in interrupt-context as well. */ static int mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) @@ -3008,10 +3013,10 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) /** * megaraid_busywait_mbox() - Wait until the controller's mailbox is available - * @raid_dev - RAID device (HBA) soft state + * @raid_dev : RAID device (HBA) soft state * - * wait until the controller's mailbox is available to accept more commands. - * wait for at most 1 second + * Wait until the controller's mailbox is available to accept more commands. + * Wait for at most 1 second. */ static int megaraid_busywait_mbox(mraid_device_t *raid_dev) @@ -3032,9 +3037,9 @@ megaraid_busywait_mbox(mraid_device_t *raid_dev) /** * megaraid_mbox_product_info - some static information about the controller - * @adapter - our soft state + * @adapter : our soft state * - * issue commands to the controller to grab some parameters required by our + * Issue commands to the controller to grab some parameters required by our * caller. */ static int @@ -3157,10 +3162,10 @@ megaraid_mbox_product_info(adapter_t *adapter) /** * megaraid_mbox_extended_cdb - check for support for extended CDBs - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * this routine check whether the controller in question supports extended - * ( > 10 bytes ) CDBs + * This routine check whether the controller in question supports extended + * ( > 10 bytes ) CDBs. */ static int megaraid_mbox_extended_cdb(adapter_t *adapter) @@ -3193,8 +3198,8 @@ megaraid_mbox_extended_cdb(adapter_t *adapter) /** * megaraid_mbox_support_ha - Do we support clustering - * @adapter - soft state for the controller - * @init_id - ID of the initiator + * @adapter : soft state for the controller + * @init_id : ID of the initiator * * Determine if the firmware supports clustering and the ID of the initiator. */ @@ -3236,9 +3241,9 @@ megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id) /** * megaraid_mbox_support_random_del - Do we support random deletion - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Determine if the firmware supports random deletion + * Determine if the firmware supports random deletion. * Return: 1 is operation supported, 0 otherwise */ static int @@ -3271,10 +3276,10 @@ megaraid_mbox_support_random_del(adapter_t *adapter) /** * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware - * @adapter - soft state for the controller + * @adapter : soft state for the controller * * Find out the maximum number of scatter-gather elements supported by the - * firmware + * firmware. */ static int megaraid_mbox_get_max_sg(adapter_t *adapter) @@ -3311,10 +3316,10 @@ megaraid_mbox_get_max_sg(adapter_t *adapter) /** * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Enumerate the RAID and SCSI channels for ROMB platoforms so that channels - * can be exported as regular SCSI channels + * Enumerate the RAID and SCSI channels for ROMB platforms so that channels + * can be exported as regular SCSI channels. */ static void megaraid_mbox_enum_raid_scsi(adapter_t *adapter) @@ -3348,9 +3353,9 @@ megaraid_mbox_enum_raid_scsi(adapter_t *adapter) /** * megaraid_mbox_flush_cache - flush adapter and disks cache - * @param adapter : soft state for the controller + * @adapter : soft state for the controller * - * Flush adapter cache followed by disks cache + * Flush adapter cache followed by disks cache. */ static void megaraid_mbox_flush_cache(adapter_t *adapter) @@ -3380,13 +3385,91 @@ megaraid_mbox_flush_cache(adapter_t *adapter) /** + * megaraid_mbox_fire_sync_cmd - fire the sync cmd + * @adapter : soft state for the controller + * + * Clears the pending cmds in FW and reinits its RAID structs. + */ +static int +megaraid_mbox_fire_sync_cmd(adapter_t *adapter) +{ + mbox_t *mbox; + uint8_t raw_mbox[sizeof(mbox_t)]; + mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); + mbox64_t *mbox64; + int status = 0; + int i; + uint32_t dword; + + mbox = (mbox_t *)raw_mbox; + + memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); + + raw_mbox[0] = 0xFF; + + mbox64 = raid_dev->mbox64; + mbox = raid_dev->mbox; + + /* Wait until mailbox is free */ + if (megaraid_busywait_mbox(raid_dev) != 0) { + status = 1; + goto blocked_mailbox; + } + + /* Copy mailbox data into host structure */ + memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16); + mbox->cmdid = 0xFE; + mbox->busy = 1; + mbox->poll = 0; + mbox->ack = 0; + mbox->numstatus = 0; + mbox->status = 0; + + wmb(); + WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); + + /* Wait for maximum 1 min for status to post. + * If the Firmware SUPPORTS the ABOVE COMMAND, + * mbox->cmd will be set to 0 + * else + * the firmware will reject the command with + * mbox->numstatus set to 1 + */ + + i = 0; + status = 0; + while (!mbox->numstatus && mbox->cmd == 0xFF) { + rmb(); + msleep(1); + i++; + if (i > 1000 * 60) { + status = 1; + break; + } + } + if (mbox->numstatus == 1) + status = 1; /*cmd not supported*/ + + /* Check for interrupt line */ + dword = RDOUTDOOR(raid_dev); + WROUTDOOR(raid_dev, dword); + WRINDOOR(raid_dev,2); + + return status; + +blocked_mailbox: + con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n")); + return status; +} + +/** * megaraid_mbox_display_scb - display SCB information, mostly debug purposes - * @param adapter : controllers' soft state - * @param scb : SCB to be displayed - * @param level : debug level for console print + * @adapter : controller's soft state + * @scb : SCB to be displayed + * @level : debug level for console print * * Diplay information about the given SCB iff the current debug level is - * verbose + * verbose. */ static void megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) @@ -3434,7 +3517,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. - **/ + */ static void megaraid_mbox_setup_device_map(adapter_t *adapter) { @@ -3472,7 +3555,7 @@ megaraid_mbox_setup_device_map(adapter_t *adapter) /** * megaraid_cmm_register - register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Register with the management module, which allows applications to issue * ioctl calls to the drivers. This interface is used by the management module @@ -3562,11 +3645,11 @@ megaraid_cmm_register(adapter_t *adapter) /** * megaraid_cmm_unregister - un-register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Un-register with the management module. * FIXME: mgmt module must return failure for unregister if it has pending - * commands in LLD + * commands in LLD. */ static int megaraid_cmm_unregister(adapter_t *adapter) @@ -3579,9 +3662,9 @@ megaraid_cmm_unregister(adapter_t *adapter) /** * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD - * @param drvr_data : LLD specific data - * @param kioc : CMM interface packet - * @param action : command action + * @drvr_data : LLD specific data + * @kioc : CMM interface packet + * @action : command action * * This routine is invoked whenever the Common Mangement Module (CMM) has a * command for us. The 'action' parameter specifies if this is a new command @@ -3634,8 +3717,8 @@ megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action) /** * megaraid_mbox_mm_command - issues commands routed through CMM - * @param adapter : HBA soft state - * @param kioc : management command packet + * @adapter : HBA soft state + * @kioc : management command packet * * Issues commands, which are routed through the management module. */ @@ -3804,8 +3887,8 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb) /** * gather_hbainfo - HBA characteristics for the applications - * @param adapter : HBA soft state - * @param hinfo : pointer to the caller's host info strucuture + * @adapter : HBA soft state + * @hinfo : pointer to the caller's host info strucuture */ static int gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) @@ -3839,16 +3922,15 @@ gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) /** * megaraid_sysfs_alloc_resources - allocate sysfs related resources + * @adapter : controller's soft state * * Allocate packets required to issue FW calls whenever the sysfs attributes * are read. These attributes would require up-to-date information from the * FW. Also set up resources for mutual exclusion to share these resources and * the wait queue. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -ERROR_CODE on failure + * Return 0 on success. + * Return -ERROR_CODE on failure. */ static int megaraid_sysfs_alloc_resources(adapter_t *adapter) @@ -3885,10 +3967,9 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter) /** * megaraid_sysfs_free_resources - free sysfs related resources + * @adapter : controller's soft state * * Free packets allocated for sysfs FW commands - * - * @param adapter : controller's soft state */ static void megaraid_sysfs_free_resources(adapter_t *adapter) @@ -3907,10 +3988,9 @@ megaraid_sysfs_free_resources(adapter_t *adapter) /** * megaraid_sysfs_get_ldmap_done - callback for get ldmap + * @uioc : completed packet * * Callback routine called in the ISR/tasklet context for get ldmap call - * - * @param uioc : completed packet */ static void megaraid_sysfs_get_ldmap_done(uioc_t *uioc) @@ -3926,12 +4006,11 @@ megaraid_sysfs_get_ldmap_done(uioc_t *uioc) /** * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap + * @data : timed out packet * * Timeout routine to recover and return to application, in case the adapter - * has stopped responding. A timeout of 60 seconds for this command seem like - * a good value - * - * @param uioc : timed out packet + * has stopped responding. A timeout of 60 seconds for this command seems like + * a good value. */ static void megaraid_sysfs_get_ldmap_timeout(unsigned long data) @@ -3948,6 +4027,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) /** * megaraid_sysfs_get_ldmap - get update logical drive map + * @adapter : controller's soft state * * This routine will be called whenever user reads the logical drive * attributes, go get the current logical drive mapping table from the @@ -3959,10 +4039,8 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) * standalone libary. For now, this should suffice since there is no other * user of this interface. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -1 on failure + * Return 0 on success. + * Return -1 on failure. */ static int megaraid_sysfs_get_ldmap(adapter_t *adapter) @@ -4064,13 +4142,12 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter) /** * megaraid_sysfs_show_app_hndl - display application handle for this adapter + * @cdev : class device object representation for the host + * @buf : buffer to send data to * * Display the handle used by the applications while executing management * tasks on the adapter. We invoke a management module API to get the adapter * handle, since we do not interface with applications directly. - * - * @param cdev : class device object representation for the host - * @param buf : buffer to send data to */ static ssize_t megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) @@ -4087,16 +4164,18 @@ megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) /** * megaraid_sysfs_show_ldnum - display the logical drive number for this device + * @dev : device object representation for the scsi device + * @attr : device attribute to show + * @buf : buffer to send data to * * Display the logical drive number for the device in question, if it a valid - * logical drive. For physical devices, "-1" is returned - * The logical drive number is displayed in following format + * logical drive. For physical devices, "-1" is returned. + * + * The logical drive number is displayed in following format: * * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE> - * <int> <int> <int> <int> * - * @param dev : device object representation for the scsi device - * @param buf : buffer to send data to + * <int> <int> <int> <int> */ static ssize_t megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf) diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 2b5a3285f79..9de803cebd4 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.9" -#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)" +#define MEGARAID_VERSION "2.20.5.1" +#define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)" /* @@ -146,27 +146,27 @@ typedef struct { /** * mraid_device_t - adapter soft state structure for mailbox controllers - * @param una_mbox64 : 64-bit mbox - unaligned - * @param una_mbox64_dma : mbox dma addr - unaligned - * @param mbox : 32-bit mbox - aligned - * @param mbox64 : 64-bit mbox - aligned - * @param mbox_dma : mbox dma addr - aligned - * @param mailbox_lock : exclusion lock for the mailbox - * @param baseport : base port of hba memory - * @param baseaddr : mapped addr of hba memory - * @param mbox_pool : pool of mailboxes - * @param mbox_pool_handle : handle for the mailbox pool memory - * @param epthru_pool : a pool for extended passthru commands - * @param epthru_pool_handle : handle to the pool above - * @param sg_pool : pool of scatter-gather lists for this driver - * @param sg_pool_handle : handle to the pool above - * @param ccb_list : list of our command control blocks - * @param uccb_list : list of cmd control blocks for mgmt module - * @param umbox64 : array of mailbox for user commands (cmm) - * @param pdrv_state : array for state of each physical drive. - * @param last_disp : flag used to show device scanning - * @param hw_error : set if FW not responding - * @param fast_load : If set, skip physical device scanning + * @una_mbox64 : 64-bit mbox - unaligned + * @una_mbox64_dma : mbox dma addr - unaligned + * @mbox : 32-bit mbox - aligned + * @mbox64 : 64-bit mbox - aligned + * @mbox_dma : mbox dma addr - aligned + * @mailbox_lock : exclusion lock for the mailbox + * @baseport : base port of hba memory + * @baseaddr : mapped addr of hba memory + * @mbox_pool : pool of mailboxes + * @mbox_pool_handle : handle for the mailbox pool memory + * @epthru_pool : a pool for extended passthru commands + * @epthru_pool_handle : handle to the pool above + * @sg_pool : pool of scatter-gather lists for this driver + * @sg_pool_handle : handle to the pool above + * @ccb_list : list of our command control blocks + * @uccb_list : list of cmd control blocks for mgmt module + * @umbox64 : array of mailbox for user commands (cmm) + * @pdrv_state : array for state of each physical drive. + * @last_disp : flag used to show device scanning + * @hw_error : set if FW not responding + * @fast_load : If set, skip physical device scanning * @channel_class : channel class, RAID or SCSI * @sysfs_sem : semaphore to serialize access to sysfs res. * @sysfs_uioc : management packet to issue FW calls from sysfs diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index d85b9a8f1b8..f33a678f089 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -67,7 +67,7 @@ static struct list_head adapters_list_g; static wait_queue_head_t wait_q; -static struct file_operations lsi_fops = { +static const struct file_operations lsi_fops = { .open = mraid_mm_open, .ioctl = mraid_mm_ioctl, #ifdef CONFIG_COMPAT @@ -78,10 +78,10 @@ static struct file_operations lsi_fops = { /** * mraid_mm_open - open routine for char node interface - * @inod : unused + * @inode : unused * @filep : unused * - * allow ioctl operations by apps only if they superuser privilege + * Allow ioctl operations by apps only if they have superuser privilege. */ static int mraid_mm_open(struct inode *inode, struct file *filep) @@ -214,7 +214,9 @@ mraid_mm_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, /** * mraid_mm_get_adapter - Returns corresponding adapters for the mimd packet * @umimd : User space mimd_t ioctl packet - * @adapter : pointer to the adapter (OUT) + * @rval : returned success/error status + * + * The function return value is a pointer to the located @adapter. */ static mraid_mmadp_t * mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) @@ -252,11 +254,11 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) return adapter; } -/* - * handle_drvrcmd - This routine checks if the opcode is a driver - * cmd and if it is, handles it. +/** + * handle_drvrcmd - Checks if the opcode is a driver cmd and if it is, handles it. * @arg : packet sent by the user app * @old_ioctl : mimd if 1; uioc otherwise + * @rval : pointer for command's returned value (not function status) */ static int handle_drvrcmd(void __user *arg, uint8_t old_ioctl, int *rval) @@ -322,8 +324,8 @@ old_packet: /** * mimd_to_kioc - Converter from old to new ioctl format - * * @umimd : user space old MIMD IOCTL + * @adp : adapter softstate * @kioc : kernel space new format IOCTL * * Routine to convert MIMD interface IOCTL to new interface IOCTL packet. The @@ -474,7 +476,6 @@ mimd_to_kioc(mimd_t __user *umimd, mraid_mmadp_t *adp, uioc_t *kioc) /** * mraid_mm_attch_buf - Attach a free dma buffer for required size - * * @adp : Adapter softstate * @kioc : kioc that the buffer needs to be attached to * @xferlen : required length for buffer @@ -607,7 +608,6 @@ mraid_mm_alloc_kioc(mraid_mmadp_t *adp) /** * mraid_mm_dealloc_kioc - Return kioc to free pool - * * @adp : Adapter softstate * @kioc : uioc_t node to be returned to free pool */ @@ -652,7 +652,6 @@ mraid_mm_dealloc_kioc(mraid_mmadp_t *adp, uioc_t *kioc) /** * lld_ioctl - Routine to issue ioctl to low level drvr - * * @adp : The adapter handle * @kioc : The ioctl packet with kernel addresses */ @@ -705,7 +704,6 @@ lld_ioctl(mraid_mmadp_t *adp, uioc_t *kioc) /** * ioctl_done - callback from the low level driver - * * @kioc : completed ioctl packet */ static void @@ -756,9 +754,8 @@ ioctl_done(uioc_t *kioc) } -/* - * lld_timedout : callback from the expired timer - * +/** + * lld_timedout - callback from the expired timer * @ptr : ioctl packet that timed out */ static void @@ -776,8 +773,7 @@ lld_timedout(unsigned long ptr) /** - * kioc_to_mimd : Converter from new back to old format - * + * kioc_to_mimd - Converter from new back to old format * @kioc : Kernel space IOCTL packet (successfully issued) * @mimd : User space MIMD packet */ @@ -855,7 +851,6 @@ kioc_to_mimd(uioc_t *kioc, mimd_t __user *mimd) /** * hinfo_to_cinfo - Convert new format hba info into old format - * * @hinfo : New format, more comprehensive adapter info * @cinfo : Old format adapter info to support mimd_t apps */ @@ -878,10 +873,9 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo) } -/* - * mraid_mm_register_adp - Registration routine for low level drvrs - * - * @adp : Adapter objejct +/** + * mraid_mm_register_adp - Registration routine for low level drivers + * @lld_adp : Adapter objejct */ int mraid_mm_register_adp(mraid_mmadp_t *lld_adp) @@ -1007,15 +1001,14 @@ memalloc_error: /** * mraid_mm_adapter_app_handle - return the application handle for this adapter + * @unique_id : adapter unique identifier * - * For the given driver data, locate the adadpter in our global list and + * For the given driver data, locate the adapter in our global list and * return the corresponding handle, which is also used by applications to * uniquely identify an adapter. * - * @param unique_id : adapter unique identifier - * - * @return adapter handle if found in the list - * @return 0 if adapter could not be located, should never happen though + * Return adapter handle if found in the list. + * Return 0 if adapter could not be located, should never happen though. */ uint32_t mraid_mm_adapter_app_handle(uint32_t unique_id) @@ -1040,7 +1033,6 @@ mraid_mm_adapter_app_handle(uint32_t unique_id) /** * mraid_mm_setup_dma_pools - Set up dma buffer pools per adapter - * * @adp : Adapter softstate * * We maintain a pool of dma buffers per each adapter. Each pool has one @@ -1093,11 +1085,11 @@ dma_pool_setup_error: } -/* +/** * mraid_mm_unregister_adp - Unregister routine for low level drivers - * Assume no outstanding ioctls to llds. - * * @unique_id : UID of the adpater + * + * Assumes no outstanding ioctls to llds. */ int mraid_mm_unregister_adp(uint32_t unique_id) @@ -1131,7 +1123,6 @@ mraid_mm_unregister_adp(uint32_t unique_id) /** * mraid_mm_free_adp_resources - Free adapter softstate - * * @adp : Adapter softstate */ static void @@ -1162,7 +1153,6 @@ mraid_mm_free_adp_resources(mraid_mmadp_t *adp) /** * mraid_mm_teardown_dma_pools - Free all per adapter dma buffers - * * @adp : Adapter softstate */ static void @@ -1190,7 +1180,7 @@ mraid_mm_teardown_dma_pools(mraid_mmadp_t *adp) } /** - * mraid_mm_init : Module entry point + * mraid_mm_init - Module entry point */ static int __init mraid_mm_init(void) @@ -1214,10 +1204,13 @@ mraid_mm_init(void) } +#ifdef CONFIG_COMPAT /** - * mraid_mm_compat_ioctl : 32bit to 64bit ioctl conversion routine + * mraid_mm_compat_ioctl - 32bit to 64bit ioctl conversion routine + * @filep : file operations pointer (ignored) + * @cmd : ioctl command + * @arg : user ioctl packet */ -#ifdef CONFIG_COMPAT static long mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) @@ -1231,7 +1224,7 @@ mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd, #endif /** - * mraid_mm_exit : Module exit point + * mraid_mm_exit - Module exit point */ static void __exit mraid_mm_exit(void) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index b5bdd0d7a8b..7a812677ff8 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,11 +10,13 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.05 + * Version : v00.00.03.10-rc1 * * Authors: - * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com> - * Sumant Patro <Sumant.Patro@lsi.com> + * (email-id : megaraidlinux@lsi.com) + * Sreenivas Bagalkote + * Sumant Patro + * Bo Yang * * List of supported controllers * @@ -35,6 +37,7 @@ #include <asm/uaccess.h> #include <linux/fs.h> #include <linux/compat.h> +#include <linux/blkdev.h> #include <linux/mutex.h> #include <scsi/scsi.h> @@ -841,6 +844,11 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) instance = (struct megasas_instance *) scmd->device->host->hostdata; + + /* Don't process if we have already declared adapter dead */ + if (instance->hw_crit_error) + return SCSI_MLQUEUE_HOST_BUSY; + scmd->scsi_done = done; scmd->result = 0; @@ -850,6 +858,18 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) goto out_done; } + switch (scmd->cmnd[0]) { + case SYNCHRONIZE_CACHE: + /* + * FW takes care of flush cache on its own + * No need to send it down + */ + scmd->result = DID_OK << 16; + goto out_done; + default: + break; + } + cmd = megasas_get_cmd(instance); if (!cmd) return SCSI_MLQUEUE_HOST_BUSY; @@ -1010,6 +1030,49 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd) } /** + * megasas_bios_param - Returns disk geometry for a disk + * @sdev: device handle + * @bdev: block device + * @capacity: drive capacity + * @geom: geometry parameters + */ +static int +megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + int heads; + int sectors; + sector_t cylinders; + unsigned long tmp; + /* Default heads (64) & sectors (32) */ + heads = 64; + sectors = 32; + + tmp = heads * sectors; + cylinders = capacity; + + sector_div(cylinders, tmp); + + /* + * Handle extended translation size for logical drives > 1Gb + */ + + if (capacity >= 0x200000) { + heads = 255; + sectors = 63; + tmp = heads*sectors; + cylinders = capacity; + sector_div(cylinders, tmp); + } + + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + + return 0; +} + +/** * megasas_service_aen - Processes an event notification * @instance: Adapter soft state * @cmd: AEN command completed by the ISR @@ -1049,6 +1112,7 @@ static struct scsi_host_template megasas_template = { .eh_device_reset_handler = megasas_reset_device, .eh_bus_reset_handler = megasas_reset_bus_host, .eh_host_reset_handler = megasas_reset_bus_host, + .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, }; @@ -1282,11 +1346,13 @@ megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status) if(instance->instancet->clear_intr(instance->reg_set)) return IRQ_NONE; + if (instance->hw_crit_error) + goto out_done; /* * Schedule the tasklet for cmd completion */ tasklet_schedule(&instance->isr_tasklet); - +out_done: return IRQ_HANDLED; } @@ -1741,6 +1807,10 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr) struct megasas_cmd *cmd; struct megasas_instance *instance = (struct megasas_instance *)instance_addr; + /* If we have already declared adapter dead, donot complete cmds */ + if (instance->hw_crit_error) + return; + producer = *instance->producer; consumer = *instance->consumer; @@ -2655,9 +2725,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, * For each user buffer, create a mirror buffer and copy in */ for (i = 0; i < ioc->sge_count; i++) { - kbuff_arr[i] = pci_alloc_consistent(instance->pdev, + kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev, ioc->sgl[i].iov_len, - &buf_handle); + &buf_handle, GFP_KERNEL); if (!kbuff_arr[i]) { printk(KERN_DEBUG "megasas: Failed to alloc " "kernel SGL buffer for IOCTL \n"); @@ -2684,8 +2754,8 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, } if (ioc->sense_len) { - sense = pci_alloc_consistent(instance->pdev, ioc->sense_len, - &sense_handle); + sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len, + &sense_handle, GFP_KERNEL); if (!sense) { error = -ENOMEM; goto out; @@ -2744,12 +2814,12 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, out: if (sense) { - pci_free_consistent(instance->pdev, ioc->sense_len, + dma_free_coherent(&instance->pdev->dev, ioc->sense_len, sense, sense_handle); } for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) { - pci_free_consistent(instance->pdev, + dma_free_coherent(&instance->pdev->dev, kern_sge32[i].length, kbuff_arr[i], kern_sge32[i].phys_addr); } @@ -2913,7 +2983,7 @@ megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, /* * File operations structure for management interface */ -static struct file_operations megasas_mgmt_fops = { +static const struct file_operations megasas_mgmt_fops = { .owner = THIS_MODULE, .open = megasas_mgmt_open, .release = megasas_mgmt_release, diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 55eddcf8eb1..e862992ee37 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -15,12 +15,12 @@ #ifndef LSI_MEGARAID_SAS_H #define LSI_MEGARAID_SAS_H -/** +/* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.03.05" -#define MEGASAS_RELDATE "Oct 02, 2006" -#define MEGASAS_EXT_VERSION "Mon Oct 02 11:21:32 PDT 2006" +#define MEGASAS_VERSION "00.00.03.10-rc1" +#define MEGASAS_RELDATE "Feb 14, 2007" +#define MEGASAS_EXT_VERSION "Wed Feb 14 10:14:25 PST 2007" /* * Device IDs @@ -40,7 +40,7 @@ * "message frames" */ -/** +/* * FW posts its state in upper 4 bits of outbound_msg_0 register */ #define MFI_STATE_MASK 0xF0000000 @@ -58,7 +58,7 @@ #define MEGAMFI_FRAME_SIZE 64 -/** +/* * During FW init, clear pending cmds & reset state using inbound_msg_0 * * ABORT : Abort all pending cmds @@ -78,7 +78,7 @@ MFI_INIT_MFIMODE| \ MFI_INIT_ABORT -/** +/* * MFI frame flags */ #define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000 @@ -92,12 +92,12 @@ #define MFI_FRAME_DIR_READ 0x0010 #define MFI_FRAME_DIR_BOTH 0x0018 -/** +/* * Definition for cmd_status */ #define MFI_CMD_STATUS_POLL_MODE 0xFF -/** +/* * MFI command opcodes */ #define MFI_CMD_INIT 0x00 @@ -128,7 +128,7 @@ #define MR_DCMD_CLUSTER_RESET_ALL 0x08010100 #define MR_DCMD_CLUSTER_RESET_LD 0x08010200 -/** +/* * MFI command completion codes */ enum MFI_STAT { |