aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r--drivers/scsi/lpfc/Makefile4
-rw-r--r--drivers/scsi/lpfc/lpfc.h21
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c16
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.c18
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c97
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c22
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c36
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h5
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h57
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c168
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c87
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c1282
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.h13
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c298
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h3
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h4
19 files changed, 1751 insertions, 386 deletions
diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index 88928f00aa2..fe5d396aca7 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,7 +1,7 @@
#/*******************************************************************
# * This file is part of the Emulex Linux Device Driver for *
# * Fibre Channel Host Bus Adapters. *
-# * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+# * Copyright (C) 2004-2012 Emulex. All rights reserved. *
# * EMULEX and SLI are trademarks of Emulex. *
# * www.emulex.com *
# * *
@@ -22,6 +22,8 @@
ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
ccflags-$(GCOV) += -O0
+ccflags-y += -Werror
+
obj-$(CONFIG_SCSI_LPFC) := lpfc.o
lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o \
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 825f9307417..3a1ffdd6d83 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -534,6 +534,7 @@ struct lpfc_hba {
void (*lpfc_scsi_prep_cmnd)
(struct lpfc_vport *, struct lpfc_scsi_buf *,
struct lpfc_nodelist *);
+
/* IOCB interface function jump table entries */
int (*__lpfc_sli_issue_iocb)
(struct lpfc_hba *, uint32_t,
@@ -541,8 +542,6 @@ struct lpfc_hba {
void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
struct lpfc_iocbq *);
int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
-
-
IOCB_t * (*lpfc_get_iocb_from_iocbq)
(struct lpfc_iocbq *);
void (*lpfc_scsi_cmd_iocb_cmpl)
@@ -551,10 +550,12 @@ struct lpfc_hba {
/* MBOX interface function jump table entries */
int (*lpfc_sli_issue_mbox)
(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+
/* Slow-path IOCB process function jump table entries */
void (*lpfc_sli_handle_slow_ring_event)
(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
uint32_t mask);
+
/* INIT device interface function jump table entries */
int (*lpfc_sli_hbq_to_firmware)
(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
@@ -573,6 +574,10 @@ struct lpfc_hba {
int (*lpfc_selective_reset)
(struct lpfc_hba *);
+ int (*lpfc_bg_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ /* Add new entries here */
+
/* SLI4 specific HBA data structure */
struct lpfc_sli4_hba sli4_hba;
@@ -835,9 +840,12 @@ struct lpfc_hba {
struct dentry *debug_dumpData; /* BlockGuard BPL */
struct dentry *debug_dumpDif; /* BlockGuard BPL */
struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
+ struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */
+ struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */
struct dentry *debug_writeGuard; /* inject write guard_tag errors */
struct dentry *debug_writeApp; /* inject write app_tag errors */
struct dentry *debug_writeRef; /* inject write ref_tag errors */
+ struct dentry *debug_readGuard; /* inject read guard_tag errors */
struct dentry *debug_readApp; /* inject read app_tag errors */
struct dentry *debug_readRef; /* inject read ref_tag errors */
@@ -845,10 +853,13 @@ struct lpfc_hba {
uint32_t lpfc_injerr_wgrd_cnt;
uint32_t lpfc_injerr_wapp_cnt;
uint32_t lpfc_injerr_wref_cnt;
+ uint32_t lpfc_injerr_rgrd_cnt;
uint32_t lpfc_injerr_rapp_cnt;
uint32_t lpfc_injerr_rref_cnt;
+ uint32_t lpfc_injerr_nportid;
+ struct lpfc_name lpfc_injerr_wwpn;
sector_t lpfc_injerr_lba;
-#define LPFC_INJERR_LBA_OFF (sector_t)0xffffffffffffffff
+#define LPFC_INJERR_LBA_OFF (sector_t)(-1)
struct dentry *debug_slow_ring_trc;
struct lpfc_debugfs_trc *slow_ring_trc;
@@ -901,6 +912,8 @@ struct lpfc_hba {
atomic_t fast_event_count;
uint32_t fcoe_eventtag;
uint32_t fcoe_eventtag_at_fcf_scan;
+ uint32_t fcoe_cvl_eventtag;
+ uint32_t fcoe_cvl_eventtag_attn;
struct lpfc_fcf fcf;
uint8_t fc_map[3];
uint8_t valid_vlan;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f6697cb0e21..5eb2bc11618 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -353,7 +353,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
struct lpfc_hba *phba = vport->phba;
uint32_t if_type;
uint8_t sli_family;
- char fwrev[32];
+ char fwrev[FW_REV_STR_SIZE];
int len;
lpfc_decode_firmware_rev(phba, fwrev, 1);
@@ -922,11 +922,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
rc = lpfc_sli4_pdev_status_reg_wait(phba);
if (rc == -EPERM) {
- /* no privilage for reset, restore if needed */
- if (before_fc_flag & FC_OFFLINE_MODE)
- goto out;
+ /* no privilage for reset */
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3150 No privilage to perform the requested "
+ "access: x%x\n", reg_val);
} else if (rc == -EIO) {
/* reset failed, there is nothing more we can do */
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3153 Fail to perform the requested "
+ "access: x%x\n", reg_val);
return rc;
}
@@ -2571,7 +2575,7 @@ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
# objects that have been registered with the nameserver after login.
*/
-LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1,
+LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
"Deregister nameserver objects before LOGO");
/*
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 56a86baece5..141e4b40bb5 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -589,7 +589,10 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
}
cmdiocbq->iocb.un.elsreq64.bdl.bdeSize =
(request_nseg + reply_nseg) * sizeof(struct ulp_bde64);
- cmdiocbq->iocb.ulpContext = rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ cmdiocbq->iocb.ulpContext = phba->sli4_hba.rpi_ids[rpi];
+ else
+ cmdiocbq->iocb.ulpContext = rpi;
cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
cmdiocbq->context1 = NULL;
cmdiocbq->context2 = NULL;
@@ -1768,7 +1771,7 @@ lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba)
bf_set(lpfc_mbx_set_diag_state_link_type,
&link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_tp);
bf_set(lpfc_mbx_set_diag_lpbk_type, &link_diag_loopback->u.req,
- LPFC_DIAG_LOOPBACK_TYPE_SERDES);
+ LPFC_DIAG_LOOPBACK_TYPE_INTERNAL);
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) {
@@ -3977,7 +3980,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES:
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"3106 Handled SLI_CONFIG "
- "subsys_fcoe, opcode:x%x\n",
+ "subsys_comn, opcode:x%x\n",
opcode);
rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job,
nemb_mse, dmabuf);
@@ -3985,7 +3988,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
default:
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"3107 Reject SLI_CONFIG "
- "subsys_fcoe, opcode:x%x\n",
+ "subsys_comn, opcode:x%x\n",
opcode);
rc = -EPERM;
break;
@@ -4556,7 +4559,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ sizeof(MAILBOX_t));
}
} else if (phba->sli_rev == LPFC_SLI_REV4) {
- if (pmb->mbxCommand == MBX_DUMP_MEMORY) {
+ /* Let type 4 (well known data) through because the data is
+ * returned in varwords[4-8]
+ * otherwise check the recieve length and fetch the buffer addr
+ */
+ if ((pmb->mbxCommand == MBX_DUMP_MEMORY) &&
+ (pmb->un.varDmp.type != DMP_WELL_KNOWN)) {
/* rebuild the command for sli4 using our own buffers
* like we do for biu diags
*/
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 26924b7a6cd..330dd7192a7 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -462,3 +462,4 @@ int lpfc_issue_unreg_vfi(struct lpfc_vport *);
int lpfc_selective_reset(struct lpfc_hba *);
int lpfc_sli4_read_config(struct lpfc_hba *phba);
int lpfc_scsi_buf_update(struct lpfc_hba *phba);
+void lpfc_sli4_node_prep(struct lpfc_hba *phba);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 707081d0a22..93e96b3c909 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1076,7 +1076,7 @@ int
lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol,
size_t size)
{
- char fwrev[16];
+ char fwrev[FW_REV_STR_SIZE];
int n;
lpfc_decode_firmware_rev(vport->phba, fwrev, 0);
@@ -1834,7 +1834,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
uint8_t *fwname;
if (phba->sli_rev == LPFC_SLI_REV4)
- sprintf(fwrevision, "%s", vp->rev.opFwName);
+ snprintf(fwrevision, FW_REV_STR_SIZE, "%s", vp->rev.opFwName);
else if (vp->rev.rBit) {
if (psli->sli_flag & LPFC_SLI_ACTIVE)
rev = vp->rev.sli2FwRev;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 3587a3fe8fc..5bdf2eecb17 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -1010,23 +1010,35 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
{
struct dentry *dent = file->f_dentry;
struct lpfc_hba *phba = file->private_data;
- char cbuf[16];
+ char cbuf[32];
+ uint64_t tmp = 0;
int cnt = 0;
if (dent == phba->debug_writeGuard)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt);
else if (dent == phba->debug_writeApp)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt);
else if (dent == phba->debug_writeRef)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt);
+ else if (dent == phba->debug_readGuard)
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt);
else if (dent == phba->debug_readApp)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt);
else if (dent == phba->debug_readRef)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt);
- else if (dent == phba->debug_InjErrLBA)
- cnt = snprintf(cbuf, 16, "0x%lx\n",
- (unsigned long) phba->lpfc_injerr_lba);
- else
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt);
+ else if (dent == phba->debug_InjErrNPortID)
+ cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid);
+ else if (dent == phba->debug_InjErrWWPN) {
+ memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name));
+ tmp = cpu_to_be64(tmp);
+ cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp);
+ } else if (dent == phba->debug_InjErrLBA) {
+ if (phba->lpfc_injerr_lba == (sector_t)(-1))
+ cnt = snprintf(cbuf, 32, "off\n");
+ else
+ cnt = snprintf(cbuf, 32, "0x%llx\n",
+ (uint64_t) phba->lpfc_injerr_lba);
+ } else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0547 Unknown debugfs error injection entry\n");
@@ -1040,7 +1052,7 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
struct dentry *dent = file->f_dentry;
struct lpfc_hba *phba = file->private_data;
char dstbuf[32];
- unsigned long tmp;
+ uint64_t tmp = 0;
int size;
memset(dstbuf, 0, 32);
@@ -1048,7 +1060,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
if (copy_from_user(dstbuf, buf, size))
return 0;
- if (strict_strtoul(dstbuf, 0, &tmp))
+ if (dent == phba->debug_InjErrLBA) {
+ if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
+ tmp = (uint64_t)(-1);
+ }
+
+ if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
return 0;
if (dent == phba->debug_writeGuard)
@@ -1057,13 +1074,20 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
else if (dent == phba->debug_writeRef)
phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_readGuard)
+ phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp;
else if (dent == phba->debug_readApp)
phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
else if (dent == phba->debug_readRef)
phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
else if (dent == phba->debug_InjErrLBA)
phba->lpfc_injerr_lba = (sector_t)tmp;
- else
+ else if (dent == phba->debug_InjErrNPortID)
+ phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID);
+ else if (dent == phba->debug_InjErrWWPN) {
+ tmp = cpu_to_be64(tmp);
+ memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name));
+ } else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0548 Unknown debugfs error injection entry\n");
@@ -3945,6 +3969,28 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
}
phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ snprintf(name, sizeof(name), "InjErrNPortID");
+ phba->debug_InjErrNPortID =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_InjErrNPortID) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0809 Cannot create debugfs InjErrNPortID\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "InjErrWWPN");
+ phba->debug_InjErrWWPN =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_InjErrWWPN) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0810 Cannot create debugfs InjErrWWPN\n");
+ goto debug_failed;
+ }
+
snprintf(name, sizeof(name), "writeGuardInjErr");
phba->debug_writeGuard =
debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -3978,6 +4024,17 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
goto debug_failed;
}
+ snprintf(name, sizeof(name), "readGuardInjErr");
+ phba->debug_readGuard =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_readGuard) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0808 Cannot create debugfs readGuard\n");
+ goto debug_failed;
+ }
+
snprintf(name, sizeof(name), "readAppInjErr");
phba->debug_readApp =
debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -4306,6 +4363,14 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */
phba->debug_InjErrLBA = NULL;
}
+ if (phba->debug_InjErrNPortID) { /* InjErrNPortID */
+ debugfs_remove(phba->debug_InjErrNPortID);
+ phba->debug_InjErrNPortID = NULL;
+ }
+ if (phba->debug_InjErrWWPN) {
+ debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */
+ phba->debug_InjErrWWPN = NULL;
+ }
if (phba->debug_writeGuard) {
debugfs_remove(phba->debug_writeGuard); /* writeGuard */
phba->debug_writeGuard = NULL;
@@ -4318,6 +4383,10 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
debugfs_remove(phba->debug_writeRef); /* writeRef */
phba->debug_writeRef = NULL;
}
+ if (phba->debug_readGuard) {
+ debugfs_remove(phba->debug_readGuard); /* readGuard */
+ phba->debug_readGuard = NULL;
+ }
if (phba->debug_readApp) {
debugfs_remove(phba->debug_readApp); /* readApp */
phba->debug_readApp = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7afc757338d..3407b39e0a3 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -925,9 +925,17 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
* due to new FCF discovery
*/
if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
- (phba->fcf.fcf_flag & FCF_DISCOVERY) &&
- !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
+ (phba->fcf.fcf_flag & FCF_DISCOVERY)) {
+ if (phba->link_state < LPFC_LINK_UP)
+ goto stop_rr_fcf_flogi;
+ if ((phba->fcoe_cvl_eventtag_attn ==
+ phba->fcoe_cvl_eventtag) &&
+ (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))
+ goto stop_rr_fcf_flogi;
+ else
+ phba->fcoe_cvl_eventtag_attn =
+ phba->fcoe_cvl_eventtag;
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on FCF (x%x), "
"status:x%x/x%x, tmo:x%x, perform "
@@ -943,6 +951,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
goto out;
}
+stop_rr_fcf_flogi:
/* FLOGI failure */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
@@ -1526,7 +1535,6 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
memcpy(&ndlp->active_rrqs.xri_bitmap,
&rrq.xri_bitmap,
sizeof(ndlp->active_rrqs.xri_bitmap));
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
/* Since we are swapping the ndlp passed in with the new one
* and the did has already been swapped, copy over the
* state and names.
@@ -1536,6 +1544,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
sizeof(struct lpfc_name));
new_ndlp->nlp_state = ndlp->nlp_state;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
/* Fix up the rport accordingly */
rport = ndlp->rport;
if (rport) {
@@ -7172,7 +7181,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
goto out;
/* FDISC failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0126 FDISC failed. (%d/%d)\n",
+ "0126 FDISC failed. (x%x/x%x)\n",
irsp->ulpStatus, irsp->un.ulpWord[4]);
goto fdisc_failed;
}
@@ -7283,6 +7292,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
int rc;
vport->port_state = LPFC_FDISC;
+ vport->fc_myDID = 0;
cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
ELS_CMD_FDISC);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 678a4b11059..b507536dc5b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -2843,7 +2843,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
struct lpfc_vport *vport = mboxq->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- if (mboxq->u.mb.mbxStatus) {
+ /*
+ * VFI not supported for interface type 0, so ignore any mailbox
+ * error (except VFI in use) and continue with the discovery.
+ */
+ if (mboxq->u.mb.mbxStatus &&
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_0) &&
+ mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"2018 REG_VFI mbxStatus error x%x "
"HBA state x%x\n",
@@ -2977,9 +2984,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
"topology\n");
/* Get Loop Map information */
if (bf_get(lpfc_mbx_read_top_il, la)) {
- spin_lock_irq(shost->host_lock);
+ spin_lock(shost->host_lock);
vport->fc_flag |= FC_LBIT;
- spin_unlock_irq(shost->host_lock);
+ spin_unlock(shost->host_lock);
}
vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
@@ -3029,9 +3036,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
}
vport->fc_myDID = phba->fc_pref_DID;
- spin_lock_irq(shost->host_lock);
+ spin_lock(shost->host_lock);
vport->fc_flag |= FC_LBIT;
- spin_unlock_irq(shost->host_lock);
+ spin_unlock(shost->host_lock);
}
spin_unlock_irq(&phba->hbalock);
@@ -5332,6 +5339,10 @@ lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param)
{
uint16_t *rpi = param;
+ /* check for active node */
+ if (!NLP_CHK_NODE_ACT(ndlp))
+ return 0;
+
return ndlp->nlp_rpi == *rpi;
}
@@ -5669,14 +5680,13 @@ lpfc_fcf_inuse(struct lpfc_hba *phba)
ret = 1;
spin_unlock_irq(shost->host_lock);
goto out;
- } else {
+ } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
+ ret = 1;
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
- "2624 RPI %x DID %x flg %x still "
- "logged in\n",
- ndlp->nlp_rpi, ndlp->nlp_DID,
- ndlp->nlp_flag);
- if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
- ret = 1;
+ "2624 RPI %x DID %x flag %x "
+ "still logged in\n",
+ ndlp->nlp_rpi, ndlp->nlp_DID,
+ ndlp->nlp_flag);
}
}
spin_unlock_irq(shost->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 7245bead375..5f280b5ae3d 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2010 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -70,6 +70,7 @@
/* vendor ID used in SCSI netlink calls */
#define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX)
+#define FW_REV_STR_SIZE 32
/* Common Transport structures and definitions */
union CtRevisionId {
@@ -2567,6 +2568,8 @@ typedef struct {
#define DMP_MEM_REG 0x1
#define DMP_NV_PARAMS 0x2
+#define DMP_LMSD 0x3 /* Link Module Serial Data */
+#define DMP_WELL_KNOWN 0x4
#define DMP_REGION_VPD 0xe
#define DMP_VPD_SIZE 0x400 /* maximum amount of VPD */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index e5bfa7f334e..91f09761bd3 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -321,6 +321,10 @@ struct lpfc_cqe {
#define CQE_STATUS_CMD_REJECT 0xb
#define CQE_STATUS_FCP_TGT_LENCHECK 0xc
#define CQE_STATUS_NEED_BUFF_ENTRY 0xf
+#define CQE_STATUS_DI_ERROR 0x16
+
+/* Used when mapping CQE status to IOCB */
+#define LPFC_IOCB_STATUS_MASK 0xf
/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
#define CQE_HW_STATUS_NO_ERR 0x0
@@ -334,6 +338,12 @@ struct lpfc_cqe {
#define CQE_CODE_XRI_ABORTED 0x5
#define CQE_CODE_RECEIVE_V1 0x9
+/*
+ * Define mask value for xri_aborted and wcqe completed CQE extended status.
+ * Currently, extended status is limited to 9 bits (0x0 -> 0x103) .
+ */
+#define WCQE_PARAM_MASK 0x1FF;
+
/* completion queue entry for wqe completions */
struct lpfc_wcqe_complete {
uint32_t word0;
@@ -348,6 +358,21 @@ struct lpfc_wcqe_complete {
#define lpfc_wcqe_c_hw_status_WORD word0
uint32_t total_data_placed;
uint32_t parameter;
+#define lpfc_wcqe_c_bg_edir_SHIFT 5
+#define lpfc_wcqe_c_bg_edir_MASK 0x00000001
+#define lpfc_wcqe_c_bg_edir_WORD parameter
+#define lpfc_wcqe_c_bg_tdpv_SHIFT 3
+#define lpfc_wcqe_c_bg_tdpv_MASK 0x00000001
+#define lpfc_wcqe_c_bg_tdpv_WORD parameter
+#define lpfc_wcqe_c_bg_re_SHIFT 2
+#define lpfc_wcqe_c_bg_re_MASK 0x00000001
+#define lpfc_wcqe_c_bg_re_WORD parameter
+#define lpfc_wcqe_c_bg_ae_SHIFT 1
+#define lpfc_wcqe_c_bg_ae_MASK 0x00000001
+#define lpfc_wcqe_c_bg_ae_WORD parameter
+#define lpfc_wcqe_c_bg_ge_SHIFT 0
+#define lpfc_wcqe_c_bg_ge_MASK 0x00000001
+#define lpfc_wcqe_c_bg_ge_WORD parameter
uint32_t word3;
#define lpfc_wcqe_c_valid_SHIFT lpfc_cqe_valid_SHIFT
#define lpfc_wcqe_c_valid_MASK lpfc_cqe_valid_MASK
@@ -359,8 +384,8 @@ struct lpfc_wcqe_complete {
#define lpfc_wcqe_c_pv_MASK 0x00000001
#define lpfc_wcqe_c_pv_WORD word3
#define lpfc_wcqe_c_priority_SHIFT 24
-#define lpfc_wcqe_c_priority_MASK 0x00000007
-#define lpfc_wcqe_c_priority_WORD word3
+#define lpfc_wcqe_c_priority_MASK 0x00000007
+#define lpfc_wcqe_c_priority_WORD word3
#define lpfc_wcqe_c_code_SHIFT lpfc_cqe_code_SHIFT
#define lpfc_wcqe_c_code_MASK lpfc_cqe_code_MASK
#define lpfc_wcqe_c_code_WORD lpfc_cqe_code_WORD
@@ -715,12 +740,20 @@ struct lpfc_register {
#define lpfc_eqcq_doorbell_eqci_SHIFT 9
#define lpfc_eqcq_doorbell_eqci_MASK 0x0001
#define lpfc_eqcq_doorbell_eqci_WORD word0
-#define lpfc_eqcq_doorbell_cqid_SHIFT 0
-#define lpfc_eqcq_doorbell_cqid_MASK 0x03FF
-#define lpfc_eqcq_doorbell_cqid_WORD word0
-#define lpfc_eqcq_doorbell_eqid_SHIFT 0
-#define lpfc_eqcq_doorbell_eqid_MASK 0x01FF
-#define lpfc_eqcq_doorbell_eqid_WORD word0
+#define lpfc_eqcq_doorbell_cqid_lo_SHIFT 0
+#define lpfc_eqcq_doorbell_cqid_lo_MASK 0x03FF
+#define lpfc_eqcq_doorbell_cqid_lo_WORD word0
+#define lpfc_eqcq_doorbell_cqid_hi_SHIFT 11
+#define lpfc_eqcq_doorbell_cqid_hi_MASK 0x001F
+#define lpfc_eqcq_doorbell_cqid_hi_WORD word0
+#define lpfc_eqcq_doorbell_eqid_lo_SHIFT 0
+#define lpfc_eqcq_doorbell_eqid_lo_MASK 0x01FF
+#define lpfc_eqcq_doorbell_eqid_lo_WORD word0
+#define lpfc_eqcq_doorbell_eqid_hi_SHIFT 11
+#define lpfc_eqcq_doorbell_eqid_hi_MASK 0x001F
+#define lpfc_eqcq_doorbell_eqid_hi_WORD word0
+#define LPFC_CQID_HI_FIELD_SHIFT 10
+#define LPFC_EQID_HI_FIELD_SHIFT 9
#define LPFC_BMBX 0x0160
#define lpfc_bmbx_addr_SHIFT 2
@@ -3313,7 +3346,11 @@ struct xmit_bls_rsp64_wqe {
uint32_t rsrvd4;
struct wqe_did wqe_dest;
struct wqe_common wqe_com; /* words 6-11 */
- uint32_t rsvd_12_15[4];
+ uint32_t word12;
+#define xmit_bls_rsp64_temprpi_SHIFT 0
+#define xmit_bls_rsp64_temprpi_MASK 0x0000ffff
+#define xmit_bls_rsp64_temprpi_WORD word12
+ uint32_t rsvd_13_15[3];
};
struct wqe_rctl_dfctl {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dfea2dada02..9598fdcb08a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -32,6 +32,7 @@
#include <linux/aer.h>
#include <linux/slab.h>
#include <linux/firmware.h>
+#include <linux/miscdevice.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -1474,8 +1475,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0);
/* consider PCI bus read error as pci_channel_offline */
- if (pci_rd_rc1 == -EIO)
+ if (pci_rd_rc1 == -EIO) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3151 PCI bus read access failure: x%x\n",
+ readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
return;
+ }
reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
@@ -1525,6 +1530,9 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
}
/* fall through for not able to recover */
}
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3152 Unrecoverable error, bring the port "
+ "offline\n");
lpfc_sli4_offline_eratt(phba);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
@@ -2333,13 +2341,20 @@ lpfc_cleanup(struct lpfc_vport *vport)
continue;
}
+ /* take care of nodes in unused state before the state
+ * machine taking action.
+ */
+ if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
+ lpfc_nlp_put(ndlp);
+ continue;
+ }
+
if (ndlp->nlp_type & NLP_FABRIC)
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RM);
-
}
/* At this point, ALL ndlp's should be gone
@@ -2513,6 +2528,42 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
}
/**
+ * lpfc_sli4_node_prep - Assign RPIs for active nodes.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * Allocate RPIs for all active remote nodes. This is needed whenever
+ * an SLI4 adapter is reset and the driver is not unloading. Its purpose
+ * is to fixup the temporary rpi assignments.
+ **/
+void
+lpfc_sli4_node_prep(struct lpfc_hba *phba)
+{
+ struct lpfc_nodelist *ndlp, *next_ndlp;
+ struct lpfc_vport **vports;
+ int i;
+
+ if (phba->sli_rev != LPFC_SLI_REV4)
+ return;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ if (vports[i]->load_flag & FC_UNLOADING)
+ continue;
+
+ list_for_each_entry_safe(ndlp, next_ndlp,
+ &vports[i]->fc_nodes,
+ nlp_listp) {
+ if (NLP_CHK_NODE_ACT(ndlp))
+ ndlp->nlp_rpi =
+ lpfc_sli4_alloc_rpi(phba);
+ }
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
* lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
@@ -2654,6 +2705,13 @@ lpfc_offline_prep(struct lpfc_hba * phba)
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
+ /*
+ * Whenever an SLI4 port goes offline, free the
+ * RPI. Get a new RPI when the adapter port
+ * comes back online.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
lpfc_unreg_rpi(vports[i], ndlp);
}
}
@@ -2726,9 +2784,13 @@ lpfc_scsi_buf_update(struct lpfc_hba *phba)
spin_lock_irq(&phba->hbalock);
spin_lock(&phba->scsi_buf_list_lock);
- list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+ list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
sb->cur_iocbq.sli4_xritag =
phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+ set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ phba->sli4_hba.xri_count++;
+ }
spin_unlock(&phba->scsi_buf_list_lock);
spin_unlock_irq(&phba->hbalock);
return 0;
@@ -3663,6 +3725,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
break;
case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2549 FCF (x%x) disconnected from network, "
"tag:x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -3724,6 +3787,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
}
break;
case LPFC_FIP_EVENT_TYPE_CVL:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -4327,6 +4391,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
int longs, sli_family;
+ int sges_per_segment;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4390,6 +4455,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+ /* With BlockGuard we can have multiple SGEs per Data Segemnt */
+ sges_per_segment = 1;
+ if (phba->cfg_enable_bg)
+ sges_per_segment = 2;
+
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -4398,7 +4468,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
* sgl sizes of must be a power of 2.
*/
buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
+ (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
+ sizeof(struct sli4_sge)));
sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
@@ -4415,6 +4486,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
default:
break;
}
+
for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
dma_buf_size < max_buf_size && buf_size > dma_buf_size;
dma_buf_size = dma_buf_size << 1)
@@ -5158,8 +5230,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
* rpi is normalized to a zero base because the physical rpi is
* port based.
*/
- curr_rpi_range = phba->sli4_hba.next_rpi -
- phba->sli4_hba.max_cfg_param.rpi_base;
+ curr_rpi_range = phba->sli4_hba.next_rpi;
spin_unlock_irq(&phba->hbalock);
/*
@@ -5750,10 +5821,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
readl(phba->sli4_hba.u.if_type2.
ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2888 Port Error Detected "
- "during POST: "
- "port status reg 0x%x, "
- "port_smphr reg 0x%x, "
+ "2888 Unrecoverable port error "
+ "following POST: port status reg "
+ "0x%x, port_smphr reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
reg_data.word0,
portsmphr_reg.word0,
@@ -6074,7 +6144,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
@@ -7163,6 +7232,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
uint32_t rdy_chk, num_resets = 0, reset_again = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
+ uint16_t devid;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
@@ -7209,7 +7279,9 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
LPFC_SLIPORT_INIT_PORT);
writel(reg_data.word0, phba->sli4_hba.u.if_type2.
CTRLregaddr);
-
+ /* flush */
+ pci_read_config_word(phba->pcidev,
+ PCI_DEVICE_ID, &devid);
/*
* Poll the Port Status Register and wait for RDY for
* up to 10 seconds. If the port doesn't respond, treat
@@ -7223,19 +7295,17 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
rc = -ENODEV;
goto out;
}
- if (bf_get(lpfc_sliport_status_rdy, &reg_data))
- break;
- if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+ if (bf_get(lpfc_sliport_status_rn, &reg_data))
reset_again++;
+ if (bf_get(lpfc_sliport_status_rdy, &reg_data))
break;
- }
}
/*
* If the port responds to the init request with
* reset needed, delay for a bit and restart the loop.
*/
- if (reset_again) {
+ if (reset_again && (rdy_chk < 1000)) {
msleep(10);
reset_again = 0;
continue;
@@ -7249,11 +7319,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
phba->work_status[1] = readl(
phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2890 Port Error Detected "
- "during Port Reset: "
- "port status reg 0x%x, "
+ "2890 Port error detected during port "
+ "reset(%d): port status reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
- reg_data.word0,
+ num_resets, reg_data.word0,
phba->work_status[0],
phba->work_status[1]);
rc = -ENODEV;
@@ -8112,6 +8181,9 @@ lpfc_unset_hba(struct lpfc_hba *phba)
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(shost->host_lock);
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
@@ -8644,6 +8716,9 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+
lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
@@ -9058,7 +9133,7 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
int
lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
{
- char fwrev[32];
+ char fwrev[FW_REV_STR_SIZE];
struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
struct list_head dma_buffer_list;
int i, rc = 0;
@@ -10012,6 +10087,36 @@ lpfc_io_resume(struct pci_dev *pdev)
return;
}
+/**
+ * lpfc_mgmt_open - method called when 'lpfcmgmt' is opened from userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine puts a reference count on the lpfc module whenever the
+ * character device is opened
+ **/
+static int
+lpfc_mgmt_open(struct inode *inode, struct file *filep)
+{
+ try_module_get(THIS_MODULE);
+ return 0;
+}
+
+/**
+ * lpfc_mgmt_release - method called when 'lpfcmgmt' is closed in userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine removes a reference count from the lpfc module when the
+ * character device is closed
+ **/
+static int
+lpfc_mgmt_release(struct inode *inode, struct file *filep)
+{
+ module_put(THIS_MODULE);
+ return 0;
+}
+
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
@@ -10124,6 +10229,17 @@ static struct pci_driver lpfc_driver = {
.err_handler = &lpfc_err_handler,
};
+static const struct file_operations lpfc_mgmt_fop = {
+ .open = lpfc_mgmt_open,
+ .release = lpfc_mgmt_release,
+};
+
+static struct miscdevice lpfc_mgmt_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "lpfcmgmt",
+ .fops = &lpfc_mgmt_fop,
+};
+
/**
* lpfc_init - lpfc module initialization routine
*
@@ -10144,6 +10260,11 @@ lpfc_init(void)
printk(LPFC_MODULE_DESC "\n");
printk(LPFC_COPYRIGHT "\n");
+ error = misc_register(&lpfc_mgmt_dev);
+ if (error)
+ printk(KERN_ERR "Could not register lpfcmgmt device, "
+ "misc_register returned with status %d", error);
+
if (lpfc_enable_npiv) {
lpfc_transport_functions.vport_create = lpfc_vport_create;
lpfc_transport_functions.vport_delete = lpfc_vport_delete;
@@ -10180,6 +10301,7 @@ lpfc_init(void)
static void __exit
lpfc_exit(void)
{
+ misc_deregister(&lpfc_mgmt_dev);
pci_unregister_driver(&lpfc_driver);
fc_release_transport(lpfc_transport_template);
if (lpfc_enable_npiv)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index e8bb0055994..15ca2a9a0cd 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -48,6 +48,10 @@ static int
lpfc_check_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_name *nn, struct lpfc_name *pn)
{
+ /* First, we MUST have a RPI registered */
+ if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED))
+ return 0;
+
/* Compare the ADISC rsp WWNN / WWPN matches our internal node
* table entry for that node.
*/
@@ -385,6 +389,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (!mbox)
goto out;
+ /* Registering an existing RPI behaves differently for SLI3 vs SLI4 */
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_unreg_rpi(vport, ndlp);
+
rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
(uint8_t *) sp, mbox, ndlp->nlp_rpi);
if (rc) {
@@ -432,11 +440,15 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_unlock_irq(shost->host_lock);
stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD;
stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
- lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
+ rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
ndlp, mbox);
+ if (rc)
+ mempool_free(mbox, phba->mbox_mem_pool);
return 1;
}
- lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ if (rc)
+ mempool_free(mbox, phba->mbox_mem_pool);
return 1;
out:
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
@@ -445,11 +457,43 @@ out:
return 0;
}
+/**
+ * lpfc_mbx_cmpl_resume_rpi - Resume RPI completion routine
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object
+ *
+ * This routine is invoked to issue a completion to a rcv'ed
+ * ADISC or PDISC after the paused RPI has been resumed.
+ **/
+static void
+lpfc_mbx_cmpl_resume_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport;
+ struct lpfc_iocbq *elsiocb;
+ struct lpfc_nodelist *ndlp;
+ uint32_t cmd;
+
+ elsiocb = (struct lpfc_iocbq *)mboxq->context1;
+ ndlp = (struct lpfc_nodelist *) mboxq->context2;
+ vport = mboxq->vport;
+ cmd = elsiocb->drvrTimeout;
+
+ if (cmd == ELS_CMD_ADISC) {
+ lpfc_els_rsp_adisc_acc(vport, elsiocb, ndlp);
+ } else {
+ lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, elsiocb,
+ ndlp, NULL);
+ }
+ kfree(elsiocb);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
static int
lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_iocbq *cmdiocb)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_iocbq *elsiocb;
struct lpfc_dmabuf *pcmd;
struct serv_parm *sp;
struct lpfc_name *pnn, *ppn;
@@ -475,12 +519,43 @@ lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
icmd = &cmdiocb->iocb;
if (icmd->ulpStatus == 0 && lpfc_check_adisc(vport, ndlp, pnn, ppn)) {
+
+ /*
+ * As soon as we send ACC, the remote NPort can
+ * start sending us data. Thus, for SLI4 we must
+ * resume the RPI before the ACC goes out.
+ */
+ if (vport->phba->sli_rev == LPFC_SLI_REV4) {
+ elsiocb = kmalloc(sizeof(struct lpfc_iocbq),
+ GFP_KERNEL);
+ if (elsiocb) {
+
+ /* Save info from cmd IOCB used in rsp */
+ memcpy((uint8_t *)elsiocb, (uint8_t *)cmdiocb,
+ sizeof(struct lpfc_iocbq));
+
+ /* Save the ELS cmd */
+ elsiocb->drvrTimeout = cmd;
+
+ lpfc_sli4_resume_rpi(ndlp,
+ lpfc_mbx_cmpl_resume_rpi, elsiocb);
+ goto out;
+ }
+ }
+
if (cmd == ELS_CMD_ADISC) {
lpfc_els_rsp_adisc_acc(vport, cmdiocb, ndlp);
} else {
- lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp,
- NULL);
+ lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb,
+ ndlp, NULL);
}
+out:
+ /* If we are authenticated, move to the proper state */
+ if (ndlp->nlp_type & NLP_FCP_TARGET)
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
+ else
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+
return 1;
}
/* Reject this request because invalid parameters */
@@ -1229,7 +1304,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
}
if (phba->sli_rev == LPFC_SLI_REV4) {
- rc = lpfc_sli4_resume_rpi(ndlp);
+ rc = lpfc_sli4_resume_rpi(ndlp, NULL, NULL);
if (rc) {
/* Stay in state and retry. */
ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c60f5d0b386..88f3a83dbd2 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -39,8 +39,8 @@
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
-#include "lpfc_scsi.h"
#include "lpfc.h"
+#include "lpfc_scsi.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
@@ -51,13 +51,19 @@
int _dump_buf_done;
static char *dif_op_str[] = {
- "SCSI_PROT_NORMAL",
- "SCSI_PROT_READ_INSERT",
- "SCSI_PROT_WRITE_STRIP",
- "SCSI_PROT_READ_STRIP",
- "SCSI_PROT_WRITE_INSERT",
- "SCSI_PROT_READ_PASS",
- "SCSI_PROT_WRITE_PASS",
+ "PROT_NORMAL",
+ "PROT_READ_INSERT",
+ "PROT_WRITE_STRIP",
+ "PROT_READ_STRIP",
+ "PROT_WRITE_INSERT",
+ "PROT_READ_PASS",
+ "PROT_WRITE_PASS",
+};
+
+static char *dif_grd_str[] = {
+ "NO_GUARD",
+ "DIF_CRC",
+ "DIX_IP",
};
struct scsi_dif_tuple {
@@ -1280,32 +1286,51 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/*
- * Given a scsi cmnd, determine the BlockGuard tags to be used with it
+
+/* Return if if error injection is detected by Initiator */
+#define BG_ERR_INIT 0x1
+/* Return if if error injection is detected by Target */
+#define BG_ERR_TGT 0x2
+/* Return if if swapping CSUM<-->CRC is required for error injection */
+#define BG_ERR_SWAP 0x10
+/* Return if disabling Guard/Ref/App checking is required for error injection */
+#define BG_ERR_CHECK 0x20
+
+/**
+ * lpfc_bg_err_inject - Determine if we should inject an error
+ * @phba: The Hba for which this call is being executed.
* @sc: The SCSI command to examine
* @reftag: (out) BlockGuard reference tag for transmitted data
* @apptag: (out) BlockGuard application tag for transmitted data
* @new_guard (in) Value to replace CRC with if needed
*
- * Returns (1) if error injection was performed, (0) otherwise
- */
+ * Returns BG_ERR_* bit mask or 0 if request ignored
+ **/
static int
lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
{
struct scatterlist *sgpe; /* s/g prot entry */
struct scatterlist *sgde; /* s/g data entry */
- struct scsi_dif_tuple *src;
+ struct lpfc_scsi_buf *lpfc_cmd = NULL;
+ struct scsi_dif_tuple *src = NULL;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_rport_data *rdata;
uint32_t op = scsi_get_prot_op(sc);
uint32_t blksize;
uint32_t numblks;
sector_t lba;
int rc = 0;
+ int blockoff = 0;
if (op == SCSI_PROT_NORMAL)
return 0;
+ sgpe = scsi_prot_sglist(sc);
+ sgde = scsi_sglist(sc);
lba = scsi_get_lba(sc);
+
+ /* First check if we need to match the LBA */
if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
blksize = lpfc_cmd_blksize(sc);
numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
@@ -1314,142 +1339,380 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
if ((phba->lpfc_injerr_lba < lba) ||
(phba->lpfc_injerr_lba >= (lba + numblks)))
return 0;
+ if (sgpe) {
+ blockoff = phba->lpfc_injerr_lba - lba;
+ numblks = sg_dma_len(sgpe) /
+ sizeof(struct scsi_dif_tuple);
+ if (numblks < blockoff)
+ blockoff = numblks;
+ }
}
- sgpe = scsi_prot_sglist(sc);
- sgde = scsi_sglist(sc);
+ /* Next check if we need to match the remote NPortID or WWPN */
+ rdata = sc->device->hostdata;
+ if (rdata && rdata->pnode) {
+ ndlp = rdata->pnode;
+
+ /* Make sure we have the right NPortID if one is specified */
+ if (phba->lpfc_injerr_nportid &&
+ (phba->lpfc_injerr_nportid != ndlp->nlp_DID))
+ return 0;
- /* Should we change the Reference Tag */
- if (reftag) {
/*
- * If we are SCSI_PROT_WRITE_STRIP, the protection data is
- * being stripped from the wire, thus it doesn't matter.
+ * Make sure we have the right WWPN if one is specified.
+ * wwn[0] should be a non-zero NAA in a good WWPN.
*/
- if ((op == SCSI_PROT_WRITE_PASS) ||
- (op == SCSI_PROT_WRITE_INSERT)) {
- if (phba->lpfc_injerr_wref_cnt) {
+ if (phba->lpfc_injerr_wwpn.u.wwn[0] &&
+ (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
+ sizeof(struct lpfc_name)) != 0))
+ return 0;
+ }
+
+ /* Setup a ptr to the protection data if the SCSI host provides it */
+ if (sgpe) {
+ src = (struct scsi_dif_tuple *)sg_virt(sgpe);
+ src += blockoff;
+ lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
+ }
+
+ /* Should we change the Reference Tag */
+ if (reftag) {
+ if (phba->lpfc_injerr_wref_cnt) {
+ switch (op) {
+ case SCSI_PROT_WRITE_PASS:
+ if (src) {
+ /*
+ * For WRITE_PASS, force the error
+ * to be sent on the wire. It should
+ * be detected by the Target.
+ * If blockoff != 0 error will be
+ * inserted in middle of the IO.
+ */
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9076 BLKGRD: Injecting reftag error: "
+ "write lba x%lx + x%x oldrefTag x%x\n",
+ (unsigned long)lba, blockoff,
+ be32_to_cpu(src->ref_tag));
+
+ /*
+ * Save the old ref_tag so we can
+ * restore it on completion.
+ */
+ if (lpfc_cmd) {
+ lpfc_cmd->prot_data_type =
+ LPFC_INJERR_REFTAG;
+ lpfc_cmd->prot_data_segment =
+ src;
+ lpfc_cmd->prot_data =
+ src->ref_tag;
+ }
+ src->ref_tag = cpu_to_be32(0xDEADBEEF);
+ phba->lpfc_injerr_wref_cnt--;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+ break;
+ }
+ /* Drop thru */
+ case SCSI_PROT_WRITE_INSERT:
+ /*
+ * For WRITE_INSERT, force the error
+ * to be sent on the wire. It should be
+ * detected by the Target.
+ */
/* DEADBEEF will be the reftag on the wire */
*reftag = 0xDEADBEEF;
phba->lpfc_injerr_wref_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9078 BLKGRD: Injecting reftag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
+ case SCSI_PROT_WRITE_STRIP:
+ /*
+ * For WRITE_STRIP and WRITE_PASS,
+ * force the error on data
+ * being copied from SLI-Host to SLI-Port.
+ */
+ *reftag = 0xDEADBEEF;
+ phba->lpfc_injerr_wref_cnt--;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9081 BLKGRD: Injecting reftag error: "
+ "9077 BLKGRD: Injecting reftag error: "
"write lba x%lx\n", (unsigned long)lba);
+ break;
}
- } else {
- if (phba->lpfc_injerr_rref_cnt) {
+ }
+ if (phba->lpfc_injerr_rref_cnt) {
+ switch (op) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_READ_PASS:
+ /*
+ * For READ_STRIP and READ_PASS, force the
+ * error on data being read off the wire. It
+ * should force an IO error to the driver.
+ */
*reftag = 0xDEADBEEF;
phba->lpfc_injerr_rref_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ if (phba->lpfc_injerr_rref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9076 BLKGRD: Injecting reftag error: "
+ "9079 BLKGRD: Injecting reftag error: "
"read lba x%lx\n", (unsigned long)lba);
+ break;
}
}
}
/* Should we change the Application Tag */
if (apptag) {
- /*
- * If we are SCSI_PROT_WRITE_STRIP, the protection data is
- * being stripped from the wire, thus it doesn't matter.
- */
- if ((op == SCSI_PROT_WRITE_PASS) ||
- (op == SCSI_PROT_WRITE_INSERT)) {
- if (phba->lpfc_injerr_wapp_cnt) {
+ if (phba->lpfc_injerr_wapp_cnt) {
+ switch (op) {
+ case SCSI_PROT_WRITE_PASS:
+ if (src) {
+ /*
+ * For WRITE_PASS, force the error
+ * to be sent on the wire. It should
+ * be detected by the Target.
+ * If blockoff != 0 error will be
+ * inserted in middle of the IO.
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9080 BLKGRD: Injecting apptag error: "
+ "write lba x%lx + x%x oldappTag x%x\n",
+ (unsigned long)lba, blockoff,
+ be16_to_cpu(src->app_tag));
+
+ /*
+ * Save the old app_tag so we can
+ * restore it on completion.
+ */
+ if (lpfc_cmd) {
+ lpfc_cmd->prot_data_type =
+ LPFC_INJERR_APPTAG;
+ lpfc_cmd->prot_data_segment =
+ src;
+ lpfc_cmd->prot_data =
+ src->app_tag;
+ }
+ src->app_tag = cpu_to_be16(0xDEAD);
+ phba->lpfc_injerr_wapp_cnt--;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+ break;
+ }
+ /* Drop thru */
+ case SCSI_PROT_WRITE_INSERT:
+ /*
+ * For WRITE_INSERT, force the
+ * error to be sent on the wire. It should be
+ * detected by the Target.
+ */
/* DEAD will be the apptag on the wire */
*apptag = 0xDEAD;
phba->lpfc_injerr_wapp_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0813 BLKGRD: Injecting apptag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
+ case SCSI_PROT_WRITE_STRIP:
+ /*
+ * For WRITE_STRIP and WRITE_PASS,
+ * force the error on data
+ * being copied from SLI-Host to SLI-Port.
+ */
+ *apptag = 0xDEAD;
+ phba->lpfc_injerr_wapp_cnt--;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9077 BLKGRD: Injecting apptag error: "
+ "0812 BLKGRD: Injecting apptag error: "
"write lba x%lx\n", (unsigned long)lba);
+ break;
}
- } else {
- if (phba->lpfc_injerr_rapp_cnt) {
+ }
+ if (phba->lpfc_injerr_rapp_cnt) {
+ switch (op) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_READ_PASS:
+ /*
+ * For READ_STRIP and READ_PASS, force the
+ * error on data being read off the wire. It
+ * should force an IO error to the driver.
+ */
*apptag = 0xDEAD;
phba->lpfc_injerr_rapp_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ if (phba->lpfc_injerr_rapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9078 BLKGRD: Injecting apptag error: "
+ "0814 BLKGRD: Injecting apptag error: "
"read lba x%lx\n", (unsigned long)lba);
+ break;
}
}
}
+
/* Should we change the Guard Tag */
+ if (new_guard) {
+ if (phba->lpfc_injerr_wgrd_cnt) {
+ switch (op) {
+ case SCSI_PROT_WRITE_PASS:
+ rc = BG_ERR_CHECK;
+ /* Drop thru */
+
+ case SCSI_PROT_WRITE_INSERT:
+ /*
+ * For WRITE_INSERT, force the
+ * error to be sent on the wire. It should be
+ * detected by the Target.
+ */
+ phba->lpfc_injerr_wgrd_cnt--;
+ if (phba->lpfc_injerr_wgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
- /*
- * If we are SCSI_PROT_WRITE_INSERT, the protection data is
- * being on the wire is being fully generated on the HBA.
- * The host cannot change it or force an error.
- */
- if (((op == SCSI_PROT_WRITE_STRIP) ||
- (op == SCSI_PROT_WRITE_PASS)) &&
- phba->lpfc_injerr_wgrd_cnt) {
- if (sgpe) {
- src = (struct scsi_dif_tuple *)sg_virt(sgpe);
- /*
- * Just inject an error in the first
- * prot block.
- */
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9079 BLKGRD: Injecting guard error: "
- "write lba x%lx oldGuard x%x refTag x%x\n",
- (unsigned long)lba, src->guard_tag,
- src->ref_tag);
+ rc |= BG_ERR_TGT | BG_ERR_SWAP;
+ /* Signals the caller to swap CRC->CSUM */
- src->guard_tag = (uint16_t)new_guard;
- phba->lpfc_injerr_wgrd_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0817 BLKGRD: Injecting guard error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
+ case SCSI_PROT_WRITE_STRIP:
+ /*
+ * For WRITE_STRIP and WRITE_PASS,
+ * force the error on data
+ * being copied from SLI-Host to SLI-Port.
+ */
+ phba->lpfc_injerr_wgrd_cnt--;
+ if (phba->lpfc_injerr_wgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
- } else {
- blksize = lpfc_cmd_blksize(sc);
- /*
- * Jump past the first data block
- * and inject an error in the
- * prot data. The prot data is already
- * embedded after the regular data.
- */
- src = (struct scsi_dif_tuple *)
- (sg_virt(sgde) + blksize);
+ rc = BG_ERR_INIT | BG_ERR_SWAP;
+ /* Signals the caller to swap CRC->CSUM */
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9080 BLKGRD: Injecting guard error: "
- "write lba x%lx oldGuard x%x refTag x%x\n",
- (unsigned long)lba, src->guard_tag,
- src->ref_tag);
-
- src->guard_tag = (uint16_t)new_guard;
- phba->lpfc_injerr_wgrd_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = 1;
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0816 BLKGRD: Injecting guard error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
+ }
+ }
+ if (phba->lpfc_injerr_rgrd_cnt) {
+ switch (op) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_READ_PASS:
+ /*
+ * For READ_STRIP and READ_PASS, force the
+ * error on data being read off the wire. It
+ * should force an IO error to the driver.
+ */
+ phba->lpfc_injerr_rgrd_cnt--;
+ if (phba->lpfc_injerr_rgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+
+ rc = BG_ERR_INIT | BG_ERR_SWAP;
+ /* Signals the caller to swap CRC->CSUM */
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0818 BLKGRD: Injecting guard error: "
+ "read lba x%lx\n", (unsigned long)lba);
+ }
}
}
+
return rc;
}
#endif
-/*
- * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it
+/**
+ * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
+ * the specified SCSI command.
+ * @phba: The Hba for which this call is being executed.
* @sc: The SCSI command to examine
* @txopt: (out) BlockGuard operation for transmitted data
* @rxopt: (out) BlockGuard operation for received data
*
* Returns: zero on success; non-zero if tx and/or rx op cannot be determined
*
- */
+ **/
static int
lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
uint8_t *txop, uint8_t *rxop)
@@ -1461,20 +1724,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CSUM_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_NODIF;
break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CRC;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CSUM_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_CRC;
break;
case SCSI_PROT_NORMAL:
@@ -1490,20 +1753,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CRC;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CRC_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_CRC;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CRC_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_NODIF;
break;
case SCSI_PROT_NORMAL:
@@ -1519,8 +1782,88 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
return ret;
}
-/*
- * This function sets up buffer list for protection groups of
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+/**
+ * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
+ * the specified SCSI command in order to force a guard tag error.
+ * @phba: The Hba for which this call is being executed.
+ * @sc: The SCSI command to examine
+ * @txopt: (out) BlockGuard operation for transmitted data
+ * @rxopt: (out) BlockGuard operation for received data
+ *
+ * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
+ *
+ **/
+static int
+lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ uint8_t *txop, uint8_t *rxop)
+{
+ uint8_t guard_type = scsi_host_get_guard(sc->device->host);
+ uint8_t ret = 0;
+
+ if (guard_type == SHOST_DIX_GUARD_IP) {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ *rxop = BG_OP_IN_NODIF_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_NODIF;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ *rxop = BG_OP_IN_CSUM_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CSUM;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ *rxop = BG_OP_IN_CSUM_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_CSUM;
+ break;
+
+ case SCSI_PROT_NORMAL:
+ default:
+ break;
+
+ }
+ } else {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ *rxop = BG_OP_IN_CSUM_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CSUM;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ *rxop = BG_OP_IN_CSUM_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_CSUM;
+ break;
+
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ *rxop = BG_OP_IN_NODIF_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_NODIF;
+ break;
+
+ case SCSI_PROT_NORMAL:
+ default:
+ break;
+ }
+ }
+
+ return ret;
+}
+#endif
+
+/**
+ * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
* type LPFC_PG_TYPE_NO_DIF
*
* This is usually used when the HBA is instructed to generate
@@ -1539,12 +1882,11 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
* |more Data BDE's ... (opt)|
* +-------------------------+
*
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
*
* Note: Data s/g buffers have been dma mapped
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
static int
lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct ulp_bde64 *bpl, int datasegcnt)
@@ -1555,6 +1897,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
dma_addr_t physaddr;
int i = 0, num_bde = 0, status;
int datadir = sc->sc_data_direction;
+ uint32_t rc;
+ uint32_t checking = 1;
uint32_t reftag;
unsigned blksize;
uint8_t txop, rxop;
@@ -1565,11 +1909,16 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command for pde*/
blksize = lpfc_cmd_blksize(sc);
- reftag = scsi_get_lba(sc) & 0xffffffff;
+ reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- /* reftag is the only error we can inject here */
- lpfc_bg_err_inject(phba, sc, &reftag, 0, 0);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+ if (rc) {
+ if (rc & BG_ERR_SWAP)
+ lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+ if (rc & BG_ERR_CHECK)
+ checking = 0;
+ }
#endif
/* setup PDE5 with what we have */
@@ -1592,8 +1941,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
if (datadir == DMA_FROM_DEVICE) {
- bf_set(pde6_ce, pde6, 1);
- bf_set(pde6_re, pde6, 1);
+ bf_set(pde6_ce, pde6, checking);
+ bf_set(pde6_re, pde6, checking);
}
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
@@ -1627,9 +1976,16 @@ out:
return num_bde;
}
-/*
- * This function sets up buffer list for protection groups of
- * type LPFC_PG_TYPE_DIF_BUF
+/**
+ * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
*
* This is usually used when DIFs are in their own buffers,
* separate from the data. The HBA can then by instructed
@@ -1654,14 +2010,11 @@ out:
* | ... |
* +-------------------------+
*
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
- * @protcnt: number of segment of protection data that have been dma mapped
- *
* Note: It is assumed that both data and protection s/g buffers have been
* mapped for DMA
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
static int
lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct ulp_bde64 *bpl, int datacnt, int protcnt)
@@ -1681,6 +2034,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
int datadir = sc->sc_data_direction;
unsigned char pgdone = 0, alldone = 0;
unsigned blksize;
+ uint32_t rc;
+ uint32_t checking = 1;
uint32_t reftag;
uint8_t txop, rxop;
int num_bde = 0;
@@ -1701,11 +2056,16 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command */
blksize = lpfc_cmd_blksize(sc);
- reftag = scsi_get_lba(sc) & 0xffffffff;
+ reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- /* reftag / guard tag are the only errors we can inject here */
- lpfc_bg_err_inject(phba, sc, &reftag, 0, 0xDEAD);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+ if (rc) {
+ if (rc & BG_ERR_SWAP)
+ lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+ if (rc & BG_ERR_CHECK)
+ checking = 0;
+ }
#endif
split_offset = 0;
@@ -1729,8 +2089,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
- bf_set(pde6_ce, pde6, 1);
- bf_set(pde6_re, pde6, 1);
+ bf_set(pde6_ce, pde6, checking);
+ bf_set(pde6_re, pde6, checking);
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
bf_set(pde6_apptagval, pde6, 0);
@@ -1852,13 +2212,358 @@ out:
return num_bde;
}
-/*
+/**
+ * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_NO_DIF
+ *
+ * This is usually used when the HBA is instructed to generate
+ * DIFs and insert them into data stream (or strip DIF from
+ * incoming data stream)
+ *
+ * The buffer list consists of just one protection group described
+ * below:
+ * +-------------------------+
+ * start of prot group --> | DI_SEED |
+ * +-------------------------+
+ * | Data SGE |
+ * +-------------------------+
+ * |more Data SGE's ... (opt)|
+ * +-------------------------+
+ *
+ *
+ * Note: Data s/g buffers have been dma mapped
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct sli4_sge *sgl, int datasegcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct sli4_sge_diseed *diseed = NULL;
+ dma_addr_t physaddr;
+ int i = 0, num_sge = 0, status;
+ int datadir = sc->sc_data_direction;
+ uint32_t reftag;
+ unsigned blksize;
+ uint8_t txop, rxop;
+ uint32_t rc;
+ uint32_t checking = 1;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+
+ status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+ if (status)
+ goto out;
+
+ /* extract some info from the scsi command for pde*/
+ blksize = lpfc_cmd_blksize(sc);
+ reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+ if (rc) {
+ if (rc & BG_ERR_SWAP)
+ lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+ if (rc & BG_ERR_CHECK)
+ checking = 0;
+ }
+#endif
+
+ /* setup DISEED with what we have */
+ diseed = (struct sli4_sge_diseed *) sgl;
+ memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+ /* Endianness conversion if necessary */
+ diseed->ref_tag = cpu_to_le32(reftag);
+ diseed->ref_tag_tran = diseed->ref_tag;
+
+ /* setup DISEED with the rest of the info */
+ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+ bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+ if (datadir == DMA_FROM_DEVICE) {
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+ bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+ }
+ bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+ bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+ /* Endianness conversion if necessary for DISEED */
+ diseed->word2 = cpu_to_le32(diseed->word2);
+ diseed->word3 = cpu_to_le32(diseed->word3);
+
+ /* advance bpl and increment sge count */
+ num_sge++;
+ sgl++;
+
+ /* assumption: caller has already run dma_map_sg on command data */
+ scsi_for_each_sg(sc, sgde, datasegcnt, i) {
+ physaddr = sg_dma_address(sgde);
+ dma_len = sg_dma_len(sgde);
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ if ((i + 1) == datasegcnt)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+ sgl->sge_len = cpu_to_le32(dma_len);
+ dma_offset += dma_len;
+
+ sgl++;
+ num_sge++;
+ }
+
+out:
+ return num_sge;
+}
+
+/**
+ * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
+ *
+ * This is usually used when DIFs are in their own buffers,
+ * separate from the data. The HBA can then by instructed
+ * to place the DIFs in the outgoing stream. For read operations,
+ * The HBA could extract the DIFs and place it in DIF buffers.
+ *
+ * The buffer list for this type consists of one or more of the
+ * protection groups described below:
+ * +-------------------------+
+ * start of first prot group --> | DISEED |
+ * +-------------------------+
+ * | DIF (Prot SGE) |
+ * +-------------------------+
+ * | Data SGE |
+ * +-------------------------+
+ * |more Data SGE's ... (opt)|
+ * +-------------------------+
+ * start of new prot group --> | DISEED |
+ * +-------------------------+
+ * | ... |
+ * +-------------------------+
+ *
+ * Note: It is assumed that both data and protection s/g buffers have been
+ * mapped for DMA
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct sli4_sge *sgl, int datacnt, int protcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct scatterlist *sgpe = NULL; /* s/g prot entry */
+ struct sli4_sge_diseed *diseed = NULL;
+ dma_addr_t dataphysaddr, protphysaddr;
+ unsigned short curr_data = 0, curr_prot = 0;
+ unsigned int split_offset;
+ unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
+ unsigned int protgrp_blks, protgrp_bytes;
+ unsigned int remainder, subtotal;
+ int status;
+ unsigned char pgdone = 0, alldone = 0;
+ unsigned blksize;
+ uint32_t reftag;
+ uint8_t txop, rxop;
+ uint32_t dma_len;
+ uint32_t rc;
+ uint32_t checking = 1;
+ uint32_t dma_offset = 0;
+ int num_sge = 0;
+
+ sgpe = scsi_prot_sglist(sc);
+ sgde = scsi_sglist(sc);
+
+ if (!sgpe || !sgde) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
+ sgpe, sgde);
+ return 0;
+ }
+
+ status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+ if (status)
+ goto out;
+
+ /* extract some info from the scsi command */
+ blksize = lpfc_cmd_blksize(sc);
+ reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+ if (rc) {
+ if (rc & BG_ERR_SWAP)
+ lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+ if (rc & BG_ERR_CHECK)
+ checking = 0;
+ }
+#endif
+
+ split_offset = 0;
+ do {
+ /* setup DISEED with what we have */
+ diseed = (struct sli4_sge_diseed *) sgl;
+ memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+ /* Endianness conversion if necessary */
+ diseed->ref_tag = cpu_to_le32(reftag);
+ diseed->ref_tag_tran = diseed->ref_tag;
+
+ /* setup DISEED with the rest of the info */
+ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+ bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+ bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+ bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+ bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+ /* Endianness conversion if necessary for DISEED */
+ diseed->word2 = cpu_to_le32(diseed->word2);
+ diseed->word3 = cpu_to_le32(diseed->word3);
+
+ /* advance sgl and increment bde count */
+ num_sge++;
+ sgl++;
+
+ /* setup the first BDE that points to protection buffer */
+ protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
+ protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
+
+ /* must be integer multiple of the DIF block length */
+ BUG_ON(protgroup_len % 8);
+
+ /* Now setup DIF SGE */
+ sgl->word2 = 0;
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
+ sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
+ sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
+ sgl->word2 = cpu_to_le32(sgl->word2);
+
+ protgrp_blks = protgroup_len / 8;
+ protgrp_bytes = protgrp_blks * blksize;
+
+ /* check if DIF SGE is crossing the 4K boundary; if so split */
+ if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
+ protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
+ protgroup_offset += protgroup_remainder;
+ protgrp_blks = protgroup_remainder / 8;
+ protgrp_bytes = protgrp_blks * blksize;
+ } else {
+ protgroup_offset = 0;
+ curr_prot++;
+ }
+
+ num_sge++;
+
+ /* setup SGE's for data blocks associated with DIF data */
+ pgdone = 0;
+ subtotal = 0; /* total bytes processed for current prot grp */
+ while (!pgdone) {
+ if (!sgde) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9086 BLKGRD:%s Invalid data segment\n",
+ __func__);
+ return 0;
+ }
+ sgl++;
+ dataphysaddr = sg_dma_address(sgde) + split_offset;
+
+ remainder = sg_dma_len(sgde) - split_offset;
+
+ if ((subtotal + remainder) <= protgrp_bytes) {
+ /* we can use this whole buffer */
+ dma_len = remainder;
+ split_offset = 0;
+
+ if ((subtotal + remainder) == protgrp_bytes)
+ pgdone = 1;
+ } else {
+ /* must split this buffer with next prot grp */
+ dma_len = protgrp_bytes - subtotal;
+ split_offset += dma_len;
+ }
+
+ subtotal += dma_len;
+
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+ sgl->sge_len = cpu_to_le32(dma_len);
+ dma_offset += dma_len;
+
+ num_sge++;
+ curr_data++;
+
+ if (split_offset)
+ break;
+
+ /* Move to the next s/g segment if possible */
+ sgde = sg_next(sgde);
+ }
+
+ if (protgroup_offset) {
+ /* update the reference tag */
+ reftag += protgrp_blks;
+ sgl++;
+ continue;
+ }
+
+ /* are we done ? */
+ if (curr_prot == protcnt) {
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ alldone = 1;
+ } else if (curr_prot < protcnt) {
+ /* advance to next prot buffer */
+ sgpe = sg_next(sgpe);
+ sgl++;
+
+ /* update the reference tag */
+ reftag += protgrp_blks;
+ } else {
+ /* if we're here, we have a bug */
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9085 BLKGRD: bug in %s\n", __func__);
+ }
+
+ } while (!alldone);
+
+out:
+
+ return num_sge;
+}
+
+/**
+ * lpfc_prot_group_type - Get prtotection group type of SCSI command
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ *
* Given a SCSI command that supports DIF, determine composition of protection
* groups involved in setting up buffer lists
*
- * Returns:
- * for DIF (for both read and write)
- * */
+ * Returns: Protection group type (with or without DIF)
+ *
+ **/
static int
lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
{
@@ -1885,13 +2590,17 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
return ret;
}
-/*
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
+ *
* This is the protection/DIF aware version of
* lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
* two functions eventually, but for now, it's here
- */
+ **/
static int
-lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
+lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
@@ -2147,7 +2856,21 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
cmd->sense_buffer[8] = 0; /* Information descriptor type */
cmd->sense_buffer[9] = 0xa; /* Additional descriptor length */
cmd->sense_buffer[10] = 0x80; /* Validity bit */
- bghm /= cmd->device->sector_size;
+
+ /* bghm is a "on the wire" FC frame based count */
+ switch (scsi_get_prot_op(cmd)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ bghm /= cmd->device->sector_size;
+ break;
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ bghm /= (cmd->device->sector_size +
+ sizeof(struct scsi_dif_tuple));
+ break;
+ }
failing_sector = scsi_get_lba(cmd);
failing_sector += bghm;
@@ -2160,7 +2883,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
/* No error was reported - problem in FW? */
cmd->result = ScsiResult(DID_ERROR, 0);
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9057 BLKGRD: no errors reported!\n");
+ "9057 BLKGRD: Unknown error reported!\n");
}
out:
@@ -2292,6 +3015,180 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
}
/**
+ * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be adjusted.
+ *
+ * Adjust the data length to account for how much data
+ * is actually on the wire.
+ *
+ * returns the adjusted data length
+ **/
+static int
+lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
+ struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *sc = lpfc_cmd->pCmd;
+ int diflen, fcpdl;
+ unsigned blksize;
+
+ fcpdl = scsi_bufflen(sc);
+
+ /* Check if there is protection data on the wire */
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ /* Read */
+ if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
+ return fcpdl;
+
+ } else {
+ /* Write */
+ if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
+ return fcpdl;
+ }
+
+ /* If protection data on the wire, adjust the count accordingly */
+ blksize = lpfc_cmd_blksize(sc);
+ diflen = (fcpdl / blksize) * 8;
+ fcpdl += diflen;
+ return fcpdl;
+}
+
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This is the protection/DIF aware version of
+ * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
+ * two functions eventually, but for now, it's here
+ **/
+static int
+lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
+ struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ uint32_t num_bde = 0;
+ int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
+ int prot_group_type = 0;
+ int fcpdl;
+
+ /*
+ * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
+ * fcp_rsp regions to the first data bde entry
+ */
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+ datasegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_sglist(scsi_cmnd),
+ scsi_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!datasegcnt))
+ return 1;
+
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+
+ sgl += 1;
+ lpfc_cmd->seg_cnt = datasegcnt;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9087 BLKGRD: %s: Too many sg segments"
+ " from dma_map_sg. Config %d, seg_cnt"
+ " %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
+
+ switch (prot_group_type) {
+ case LPFC_PG_TYPE_NO_DIF:
+ num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
+ datasegcnt);
+ /* we should have 2 or more entries in buffer list */
+ if (num_bde < 2)
+ goto err;
+ break;
+ case LPFC_PG_TYPE_DIF_BUF:{
+ /*
+ * This type indicates that protection buffers are
+ * passed to the driver, so that needs to be prepared
+ * for DMA
+ */
+ protsegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!protsegcnt)) {
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ lpfc_cmd->prot_seg_cnt = protsegcnt;
+ if (lpfc_cmd->prot_seg_cnt
+ > phba->cfg_prot_sg_seg_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9088 BLKGRD: %s: Too many prot sg "
+ "segments from dma_map_sg. Config %d,"
+ "prot_seg_cnt %d\n", __func__,
+ phba->cfg_prot_sg_seg_cnt,
+ lpfc_cmd->prot_seg_cnt);
+ dma_unmap_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ datadir);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
+ datasegcnt, protsegcnt);
+ /* we should have 3 or more entries in buffer list */
+ if (num_bde < 3)
+ goto err;
+ break;
+ }
+ case LPFC_PG_TYPE_INVALID:
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9083 Unexpected protection group %i\n",
+ prot_group_type);
+ return 1;
+ }
+ }
+
+ fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
+
+ fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+ lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF;
+
+ return 0;
+err:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9084 Could not setup all needed BDE's"
+ "prot_group_type=%d, num_bde=%d\n",
+ prot_group_type, num_bde);
+ return 1;
+}
+
+/**
* lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -2310,6 +3207,25 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
}
/**
+ * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * using BlockGuard.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static inline int
+lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
* lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
@@ -2639,6 +3555,37 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
/* pick up SLI4 exhange busy status from HBA */
lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (lpfc_cmd->prot_data_type) {
+ struct scsi_dif_tuple *src = NULL;
+
+ src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
+ /*
+ * Used to restore any changes to protection
+ * data for error injection.
+ */
+ switch (lpfc_cmd->prot_data_type) {
+ case LPFC_INJERR_REFTAG:
+ src->ref_tag =
+ lpfc_cmd->prot_data;
+ break;
+ case LPFC_INJERR_APPTAG:
+ src->app_tag =
+ (uint16_t)lpfc_cmd->prot_data;
+ break;
+ case LPFC_INJERR_GUARD:
+ src->guard_tag =
+ (uint16_t)lpfc_cmd->prot_data;
+ break;
+ default:
+ break;
+ }
+
+ lpfc_cmd->prot_data = 0;
+ lpfc_cmd->prot_data_type = 0;
+ lpfc_cmd->prot_data_segment = NULL;
+ }
+#endif
if (pnode && NLP_CHK_NODE_ACT(pnode))
atomic_dec(&pnode->cmd_pending);
@@ -3072,12 +4019,14 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
case LPFC_PCI_DEV_LP:
phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+ phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
break;
case LPFC_PCI_DEV_OC:
phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+ phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
break;
@@ -3238,20 +4187,10 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
cmnd->result = err;
goto out_fail_command;
}
- /*
- * Do not let the mid-layer retry I/O too fast. If an I/O is retried
- * without waiting a bit then indicate that the device is busy.
- */
- if (cmnd->retries &&
- time_before(jiffies, (cmnd->jiffies_at_alloc +
- msecs_to_jiffies(LPFC_RETRY_PAUSE *
- cmnd->retries))))
- return SCSI_MLQUEUE_DEVICE_BUSY;
ndlp = rdata->pnode;
if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
- (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
- (phba->sli_rev == LPFC_SLI_REV4))) {
+ (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
@@ -3297,63 +4236,48 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
if (vport->phba->cfg_enable_bg) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
- "str=%s\n",
- cmnd->cmnd[0], scsi_get_prot_op(cmnd),
- dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x\n",
- cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
- cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
- cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
- cmnd->cmnd[9]);
+ "9033 BLKGRD: rcvd protected cmd:%02x op=%s "
+ "guard=%s\n", cmnd->cmnd[0],
+ dif_op_str[scsi_get_prot_op(cmnd)],
+ dif_grd_str[scsi_host_get_guard(shost)]);
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9035 BLKGRD: READ @ sector %llu, "
- "count %u\n",
+ "cnt %u, rpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request));
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9036 BLKGRD: WRITE @ sector %llu, "
- "count %u cmd=%p\n",
+ "cnt %u, wpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request),
- cmnd);
+ (cmnd->cmnd[1]>>5));
}
err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
} else {
if (vport->phba->cfg_enable_bg) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9038 BLKGRD: rcvd unprotected cmd:"
- "%02x op:%02x str=%s\n",
- cmnd->cmnd[0], scsi_get_prot_op(cmnd),
- dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9039 BLKGRD: CDB: %02x %02x %02x "
- "%02x %02x %02x %02x %02x %02x %02x\n",
- cmnd->cmnd[0], cmnd->cmnd[1],
- cmnd->cmnd[2], cmnd->cmnd[3],
- cmnd->cmnd[4], cmnd->cmnd[5],
- cmnd->cmnd[6], cmnd->cmnd[7],
- cmnd->cmnd[8], cmnd->cmnd[9]);
+ "9038 BLKGRD: rcvd unprotected cmd:"
+ "%02x op=%s guard=%s\n", cmnd->cmnd[0],
+ dif_op_str[scsi_get_prot_op(cmnd)],
+ dif_grd_str[scsi_host_get_guard(shost)]);
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9040 dbg: READ @ sector %llu, "
- "count %u\n",
+ "cnt %u, rpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request));
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9041 dbg: WRITE @ sector %llu, "
- "count %u cmd=%p\n",
- (unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request), cmnd);
- else
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9042 dbg: parser not implemented\n");
+ "9041 dbg: WRITE @ sector %llu, "
+ "cnt %u, wpt %d\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
}
err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 9075a08cf78..21a2ffe67ea 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2006 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -150,9 +150,18 @@ struct lpfc_scsi_buf {
struct lpfc_iocbq cur_iocbq;
wait_queue_head_t *waitq;
unsigned long start_time;
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ /* Used to restore any changes to protection data for error injection */
+ void *prot_data_segment;
+ uint32_t prot_data;
+ uint32_t prot_data_type;
+#define LPFC_INJERR_REFTAG 1
+#define LPFC_INJERR_APPTAG 2
+#define LPFC_INJERR_GUARD 3
+#endif
};
#define LPFC_SCSI_DMA_EXT_SIZE 264
#define LPFC_BPL_SIZE 1024
-#define LPFC_RETRY_PAUSE 300
#define MDAC_DIRECT_CMD 0x22
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 23a27592388..dbaf5b963bf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -293,7 +293,9 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
}
bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
- bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+ bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+ (q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
/* PCI read to flush PCI pipeline on re-arming for INTx mode */
if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
@@ -372,7 +374,9 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
- bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+ bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
+ (q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
return released;
}
@@ -554,81 +558,6 @@ __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
}
/**
- * __lpfc_set_rrq_active - set RRQ active bit in the ndlp's xri_bitmap.
- * @phba: Pointer to HBA context object.
- * @ndlp: nodelist pointer for this target.
- * @xritag: xri used in this exchange.
- * @rxid: Remote Exchange ID.
- * @send_rrq: Flag used to determine if we should send rrq els cmd.
- *
- * This function is called with hbalock held.
- * The active bit is set in the ndlp's active rrq xri_bitmap. Allocates an
- * rrq struct and adds it to the active_rrq_list.
- *
- * returns 0 for rrq slot for this xri
- * < 0 Were not able to get rrq mem or invalid parameter.
- **/
-static int
-__lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
- uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
-{
- struct lpfc_node_rrq *rrq;
- int empty;
- uint32_t did = 0;
-
-
- if (!ndlp)
- return -EINVAL;
-
- if (!phba->cfg_enable_rrq)
- return -EINVAL;
-
- if (phba->pport->load_flag & FC_UNLOADING) {
- phba->hba_flag &= ~HBA_RRQ_ACTIVE;
- goto out;
- }
- did = ndlp->nlp_DID;
-
- /*
- * set the active bit even if there is no mem available.
- */
- if (NLP_CHK_FREE_REQ(ndlp))
- goto out;
-
- if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
- goto out;
-
- if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap))
- goto out;
-
- rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
- if (rrq) {
- rrq->send_rrq = send_rrq;
- rrq->xritag = xritag;
- rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
- rrq->ndlp = ndlp;
- rrq->nlp_DID = ndlp->nlp_DID;
- rrq->vport = ndlp->vport;
- rrq->rxid = rxid;
- empty = list_empty(&phba->active_rrq_list);
- rrq->send_rrq = send_rrq;
- list_add_tail(&rrq->list, &phba->active_rrq_list);
- if (!(phba->hba_flag & HBA_RRQ_ACTIVE)) {
- phba->hba_flag |= HBA_RRQ_ACTIVE;
- if (empty)
- lpfc_worker_wake_up(phba);
- }
- return 0;
- }
-out:
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2921 Can't set rrq active xri:0x%x rxid:0x%x"
- " DID:0x%x Send:%d\n",
- xritag, rxid, did, send_rrq);
- return -EINVAL;
-}
-
-/**
* lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
* @phba: Pointer to HBA context object.
* @xritag: xri used in this exchange.
@@ -856,15 +785,68 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
**/
int
lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
- uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
+ uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
{
- int ret;
unsigned long iflags;
+ struct lpfc_node_rrq *rrq;
+ int empty;
+
+ if (!ndlp)
+ return -EINVAL;
+
+ if (!phba->cfg_enable_rrq)
+ return -EINVAL;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+ goto out;
+ }
+ /*
+ * set the active bit even if there is no mem available.
+ */
+ if (NLP_CHK_FREE_REQ(ndlp))
+ goto out;
+
+ if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
+ goto out;
+
+ if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap))
+ goto out;
+
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
+ if (!rrq) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3155 Unable to allocate RRQ xri:0x%x rxid:0x%x"
+ " DID:0x%x Send:%d\n",
+ xritag, rxid, ndlp->nlp_DID, send_rrq);
+ return -EINVAL;
+ }
+ rrq->send_rrq = send_rrq;
+ rrq->xritag = xritag;
+ rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
+ rrq->ndlp = ndlp;
+ rrq->nlp_DID = ndlp->nlp_DID;
+ rrq->vport = ndlp->vport;
+ rrq->rxid = rxid;
+ rrq->send_rrq = send_rrq;
spin_lock_irqsave(&phba->hbalock, iflags);
- ret = __lpfc_set_rrq_active(phba, ndlp, xritag, rxid, send_rrq);
+ empty = list_empty(&phba->active_rrq_list);
+ list_add_tail(&rrq->list, &phba->active_rrq_list);
+ phba->hba_flag |= HBA_RRQ_ACTIVE;
+ if (empty)
+ lpfc_worker_wake_up(phba);
spin_unlock_irqrestore(&phba->hbalock, iflags);
- return ret;
+ return 0;
+out:
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2921 Can't set rrq active xri:0x%x rxid:0x%x"
+ " DID:0x%x Send:%d\n",
+ xritag, rxid, ndlp->nlp_DID, send_rrq);
+ return -EINVAL;
}
/**
@@ -5629,6 +5611,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba)
rc = -ENOMEM;
goto free_vpi_ids;
}
+ phba->sli4_hba.max_cfg_param.xri_used = 0;
+ phba->sli4_hba.xri_count = 0;
phba->sli4_hba.xri_ids = kzalloc(count *
sizeof(uint16_t),
GFP_KERNEL);
@@ -6163,6 +6147,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
rc = -ENODEV;
goto out_free_mbox;
}
+ lpfc_sli4_node_prep(phba);
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
@@ -7267,11 +7252,13 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
out_not_finished:
spin_lock_irqsave(&phba->hbalock, iflags);
- mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
- __lpfc_mbox_cmpl_put(phba, mboxq);
- /* Release the token */
- psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- phba->sli.mbox_active = NULL;
+ if (phba->sli.mbox_active) {
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ /* Release the token */
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ }
spin_unlock_irqrestore(&phba->hbalock, iflags);
return MBX_NOT_FINISHED;
@@ -7555,6 +7542,8 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
sgl = (struct sli4_sge *)sglq->sgl;
icmd = &piocbq->iocb;
+ if (icmd->ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+ return sglq->sli4_xritag;
if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
numBdes = icmd->un.genreq64.bdl.bdeSize /
sizeof(struct ulp_bde64);
@@ -7756,6 +7745,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
+ *pcmd == ELS_CMD_FDISC ||
+ *pcmd == ELS_CMD_LOGO ||
*pcmd == ELS_CMD_PLOGI)) {
bf_set(els_req64_sp, &wqe->els_req, 1);
bf_set(els_req64_sid, &wqe->els_req,
@@ -7763,7 +7754,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
phba->vpi_ids[phba->pport->vpi]);
- } else if (iocbq->context1) {
+ } else if (pcmd && iocbq->context1) {
bf_set(wqe_ct, &wqe->els_req.wqe_com, 0);
bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
@@ -7830,12 +7821,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
bf_set(wqe_lnk, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpXS);
/* Always open the exchange */
bf_set(wqe_xc, &wqe->fcp_iwrite.wqe_com, 0);
- bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
LPFC_WQE_LENLOC_WORD4);
bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0);
bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
+ if (iocbq->iocb_flag & LPFC_IO_DIF) {
+ iocbq->iocb_flag &= ~LPFC_IO_DIF;
+ bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+ }
+ bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
break;
case CMD_FCP_IREAD64_CR:
/* word3 iocb=iotag wqe=payload_offset_len */
@@ -7849,12 +7844,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
bf_set(wqe_lnk, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpXS);
/* Always open the exchange */
bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
- bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
LPFC_WQE_LENLOC_WORD4);
bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0);
bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
+ if (iocbq->iocb_flag & LPFC_IO_DIF) {
+ iocbq->iocb_flag &= ~LPFC_IO_DIF;
+ bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+ }
+ bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
break;
case CMD_FCP_ICMND64_CR:
/* word3 iocb=IO_TAG wqe=reserved */
@@ -7982,6 +7981,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
xritag = 0;
break;
case CMD_XMIT_BLS_RSP64_CX:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
/* As BLS ABTS RSP WQE is very different from other WQEs,
* we re-construct this WQE here based on information in
* iocbq from scratch.
@@ -8008,8 +8008,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
}
bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+
+ /* Use CT=VPI */
+ bf_set(wqe_els_did, &wqe->xmit_bls_rsp.wqe_dest,
+ ndlp->nlp_DID);
+ bf_set(xmit_bls_rsp64_temprpi, &wqe->xmit_bls_rsp,
+ iocbq->iocb.ulpContext);
+ bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1);
bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
- iocbq->iocb.ulpContext);
+ phba->vpi_ids[phba->pport->vpi]);
bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1);
bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com,
LPFC_WQE_LENLOC_NONE);
@@ -8073,8 +8080,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
if (piocb->sli4_xritag == NO_XRI) {
if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
- piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN ||
- piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
sglq = NULL;
else {
if (pring->txq_cnt) {
@@ -8383,20 +8389,32 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba,
struct sli4_wcqe_xri_aborted *axri)
{
struct lpfc_vport *vport;
+ uint32_t ext_status = 0;
- if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"3115 Node Context not found, driver "
"ignoring abts err event\n");
+ return;
+ }
+
vport = ndlp->vport;
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"3116 Port generated FCP XRI ABORT event on "
- "vpi %d rpi %d xri x%x status 0x%x\n",
+ "vpi %d rpi %d xri x%x status 0x%x parameter x%x\n",
ndlp->vport->vpi, ndlp->nlp_rpi,
bf_get(lpfc_wcqe_xa_xri, axri),
- bf_get(lpfc_wcqe_xa_status, axri));
+ bf_get(lpfc_wcqe_xa_status, axri),
+ axri->parameter);
- if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT)
+ /*
+ * Catch the ABTS protocol failure case. Older OCe FW releases returned
+ * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and
+ * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT.
+ */
+ ext_status = axri->parameter & WCQE_PARAM_MASK;
+ if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) &&
+ ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0)))
lpfc_sli_abts_recover_port(vport, ndlp);
}
@@ -9802,12 +9820,11 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
unsigned long timeout;
timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
+
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
- spin_unlock_irq(&phba->hbalock);
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
- spin_lock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
@@ -9826,7 +9843,9 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
*/
break;
}
- }
+ } else
+ spin_unlock_irq(&phba->hbalock);
+
lpfc_sli_mbox_sys_flush(phba);
}
@@ -10653,12 +10672,14 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
struct lpfc_wcqe_complete *wcqe)
{
unsigned long iflags;
+ uint32_t status;
size_t offset = offsetof(struct lpfc_iocbq, iocb);
memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
sizeof(struct lpfc_iocbq) - offset);
/* Map WCQE parameters into irspiocb parameters */
- pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+ status = bf_get(lpfc_wcqe_c_status, wcqe);
+ pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK);
if (pIocbOut->iocb_flag & LPFC_IO_FCP)
if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
pIocbIn->iocb.un.fcpi.fcpi_parm =
@@ -10671,6 +10692,44 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
pIocbIn->iocb.un.genreq64.bdl.bdeSize = wcqe->total_data_placed;
}
+ /* Convert BG errors for completion status */
+ if (status == CQE_STATUS_DI_ERROR) {
+ pIocbIn->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
+
+ if (bf_get(lpfc_wcqe_c_bg_edir, wcqe))
+ pIocbIn->iocb.un.ulpWord[4] = IOERR_RX_DMA_FAILED;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = IOERR_TX_DMA_FAILED;
+
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat = 0;
+ if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+ BGS_GUARD_ERR_MASK;
+ if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* App Tag Check failed */
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+ BGS_APPTAG_ERR_MASK;
+ if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* Ref Tag Check failed */
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+ BGS_REFTAG_ERR_MASK;
+
+ /* Check to see if there was any good data before the error */
+ if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+ BGS_HI_WATER_MARK_PRESENT_MASK;
+ pIocbIn->iocb.unsli3.sli3_bg.bghm =
+ wcqe->total_data_placed;
+ }
+
+ /*
+ * Set ALL the error bits to indicate we don't know what
+ * type of error it is.
+ */
+ if (!pIocbIn->iocb.unsli3.sli3_bg.bgstat)
+ pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+ (BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK |
+ BGS_GUARD_ERR_MASK);
+ }
+
/* Pick up HBA exchange busy condition */
if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
spin_lock_irqsave(&phba->hbalock, iflags);
@@ -13227,7 +13286,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
LPFC_MBOXQ_t *mbox;
uint32_t reqlen, alloclen, index;
uint32_t mbox_tmo;
- uint16_t rsrc_start, rsrc_size, els_xri_cnt;
+ uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt;
uint16_t xritag_start = 0, lxri = 0;
struct lpfc_rsrc_blks *rsrc_blk;
int cnt, ttl_cnt, rc = 0;
@@ -13249,6 +13308,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
cnt = 0;
ttl_cnt = 0;
+ post_els_xri_cnt = els_xri_cnt;
list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
list) {
rsrc_start = rsrc_blk->rsrc_start;
@@ -13258,11 +13318,12 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
"3014 Working ELS Extent start %d, cnt %d\n",
rsrc_start, rsrc_size);
- loop_cnt = min(els_xri_cnt, rsrc_size);
- if (ttl_cnt + loop_cnt >= els_xri_cnt) {
- loop_cnt = els_xri_cnt - ttl_cnt;
- ttl_cnt = els_xri_cnt;
- }
+ loop_cnt = min(post_els_xri_cnt, rsrc_size);
+ if (loop_cnt < post_els_xri_cnt) {
+ post_els_xri_cnt -= loop_cnt;
+ ttl_cnt += loop_cnt;
+ } else
+ ttl_cnt += post_els_xri_cnt;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
@@ -14042,6 +14103,13 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
{
if (cmd_iocbq)
lpfc_sli_release_iocbq(phba, cmd_iocbq);
+
+ /* Failure means BLS ABORT RSP did not get delivered to remote node*/
+ if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus)
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3154 BLS ABORT RSP failed, data: x%x/x%x\n",
+ rsp_iocbq->iocb.ulpStatus,
+ rsp_iocbq->iocb.un.ulpWord[4]);
}
/**
@@ -14151,15 +14219,14 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba,
* field and RX_ID from ABTS for RX_ID field.
*/
bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP);
- bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
} else {
/* ABTS sent by initiator to CT exchange, construction
* of BA_ACC will need to allocate a new XRI as for the
- * XRI_TAG and RX_ID fields.
+ * XRI_TAG field.
*/
bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT);
- bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI);
}
+ bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid);
/* Xmit CT abts response on exchange <xid> */
@@ -14748,7 +14815,8 @@ lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
* provided rpi via a bitmask.
**/
int
-lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
+ void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg)
{
LPFC_MBOXQ_t *mboxq;
struct lpfc_hba *phba = ndlp->phba;
@@ -14761,6 +14829,13 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
/* Post all rpi memory regions to the port. */
lpfc_resume_rpi(mboxq, ndlp);
+ if (cmpl) {
+ mboxq->mbox_cmpl = cmpl;
+ mboxq->context1 = arg;
+ mboxq->context2 = ndlp;
+ } else
+ mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mboxq->vport = ndlp->vport;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -14982,6 +15057,7 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
LPFC_MBOXQ_t *mboxq;
phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag;
+ phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 29c13b63e32..3290b8e7ab6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -69,6 +69,7 @@ struct lpfc_iocbq {
#define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */
#define DSS_SECURITY_OP 0x100 /* security IO */
#define LPFC_IO_ON_Q 0x200 /* The IO is still on the TXCMPLQ */
+#define LPFC_IO_DIF 0x400 /* T10 DIF IO */
#define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */
#define LPFC_FIP_ELS_ID_SHIFT 14
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 3f266e2c54e..c19d139618b 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -633,7 +633,8 @@ void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
void lpfc_sli4_remove_rpis(struct lpfc_hba *);
void lpfc_sli4_async_event_proc(struct lpfc_hba *);
void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *);
-int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *,
+ void (*)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *);
void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index dd044d01a07..25cefc254b7 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.28"
+#define LPFC_DRIVER_VERSION "8.3.30"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-21 14:44:16 +0000