diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 156 |
1 files changed, 90 insertions, 66 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 46d529d6ac6..5a2cb484e13 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -716,7 +716,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_DEL_LD_ENTRY: case MBX_RUN_PROGRAM: case MBX_SET_MASK: - case MBX_SET_SLIM: + case MBX_SET_VARIABLE: case MBX_UNREG_D_ID: case MBX_KILL_BOARD: case MBX_CONFIG_FARP: @@ -728,7 +728,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_READ_RPI64: case MBX_REG_LOGIN64: case MBX_READ_LA64: - case MBX_FLASH_WR_ULA: + case MBX_WRITE_WWN: case MBX_SET_DEBUG: case MBX_LOAD_EXP_ROM: case MBX_ASYNCEVT_ENABLE: @@ -2182,7 +2182,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) <status> */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0436 Adapter failed to init, " - "timeout, status reg x%x\n", status); + "timeout, status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -ETIMEDOUT; } @@ -2194,7 +2197,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) <status> */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0437 Adapter failed to init, " - "chipset, status reg x%x\n", status); + "chipset, status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -EIO; } @@ -2222,7 +2228,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) /* Adapter failed to init, chipset, status reg <status> */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0438 Adapter failed to init, chipset, " - "status reg x%x\n", status); + "status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -EIO; } @@ -2581,6 +2590,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) uint32_t status, evtctr; uint32_t ha_copy; int i; + unsigned long timeout; unsigned long drvr_flag = 0; volatile uint32_t word0, ldata; void __iomem *to_slim; @@ -2756,18 +2766,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) } wmb(); - /* interrupt board to doit right away */ - writel(CA_MBATT, phba->CAregaddr); - readl(phba->CAregaddr); /* flush */ switch (flag) { case MBX_NOWAIT: - /* Don't wait for it to finish, just return */ + /* Set up reference to mailbox command */ psli->mbox_active = pmbox; + /* Interrupt board to do it */ + writel(CA_MBATT, phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + /* Don't wait for it to finish, just return */ break; case MBX_POLL: + /* Set up null reference to mailbox command */ psli->mbox_active = NULL; + /* Interrupt board to do it */ + writel(CA_MBATT, phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ word0 = *((volatile uint32_t *)&phba->slim2p->mbx); @@ -2779,15 +2795,15 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) /* Read the HBA Host Attention Register */ ha_copy = readl(phba->HAregaddr); - - i = lpfc_mbox_tmo_val(phba, mb->mbxCommand); - i *= 1000; /* Convert to ms */ - + timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, + mb->mbxCommand) * + 1000) + jiffies; + i = 0; /* Wait for command to complete */ while (((word0 & OWN_CHIP) == OWN_CHIP) || (!(ha_copy & HA_MBATT) && (phba->link_state > LPFC_WARM_START))) { - if (i-- <= 0) { + if (time_after(jiffies, timeout)) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); @@ -2800,12 +2816,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) && (evtctr != psli->slistat.mbox_event)) break; - spin_unlock_irqrestore(&phba->hbalock, - drvr_flag); - - msleep(1); - - spin_lock_irqsave(&phba->hbalock, drvr_flag); + if (i++ > 10) { + spin_unlock_irqrestore(&phba->hbalock, + drvr_flag); + msleep(1); + spin_lock_irqsave(&phba->hbalock, drvr_flag); + } if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data */ @@ -3065,7 +3081,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if (evt_code == ASYNC_TEMP_WARN) { temp_event_data.event_code = LPFC_THRESHOLD_TEMP; lpfc_printf_log(phba, - KERN_WARNING, + KERN_ERR, LOG_TEMP, "0347 Adapter is very hot, please take " "corrective action. temperature : %d Celsius\n", @@ -3074,7 +3090,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if (evt_code == ASYNC_TEMP_SAFE) { temp_event_data.event_code = LPFC_NORMAL_TEMP; lpfc_printf_log(phba, - KERN_INFO, + KERN_ERR, LOG_TEMP, "0340 Adapter temperature is OK now. " "temperature : %d Celsius\n", @@ -4047,7 +4063,6 @@ lpfc_intr_handler(int irq, void *dev_id) } if (work_ha_copy & HA_ERATT) { - phba->link_state = LPFC_HBA_ERROR; /* * There was a link/board error. Read the * status register to retrieve the error event @@ -4079,7 +4094,7 @@ lpfc_intr_handler(int irq, void *dev_id) * Stray Mailbox Interrupt, mbxCommand <cmd> * mbxStatus <status> */ - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0304 Stray Mailbox " "Interrupt mbxCommand x%x " @@ -4087,51 +4102,60 @@ lpfc_intr_handler(int irq, void *dev_id) (vport ? vport->vpi : 0), pmbox->mbxCommand, pmbox->mbxStatus); - } - phba->last_completion_time = jiffies; - del_timer_sync(&phba->sli.mbox_tmo); - - phba->sli.mbox_active = NULL; - if (pmb->mbox_cmpl) { - lpfc_sli_pcimem_bcopy(mbox, pmbox, - MAILBOX_CMD_SIZE); - } - if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { - pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; + /* clear mailbox attention bit */ + work_ha_copy &= ~HA_MBATT; + } else { + phba->last_completion_time = jiffies; + del_timer(&phba->sli.mbox_tmo); - lpfc_debugfs_disc_trc(vport, - LPFC_DISC_TRC_MBOX_VPORT, - "MBOX dflt rpi: : status:x%x rpi:x%x", - (uint32_t)pmbox->mbxStatus, - pmbox->un.varWords[0], 0); - - if ( !pmbox->mbxStatus) { - mp = (struct lpfc_dmabuf *) - (pmb->context1); - ndlp = (struct lpfc_nodelist *) - pmb->context2; - - /* Reg_LOGIN of dflt RPI was successful. - * new lets get rid of the RPI using the - * same mbox buffer. - */ - lpfc_unreg_login(phba, vport->vpi, - pmbox->un.varWords[0], pmb); - pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; - pmb->context1 = mp; - pmb->context2 = ndlp; - pmb->vport = vport; - spin_lock(&phba->hbalock); - phba->sli.sli_flag &= - ~LPFC_SLI_MBOX_ACTIVE; - spin_unlock(&phba->hbalock); - goto send_current_mbox; + phba->sli.mbox_active = NULL; + if (pmb->mbox_cmpl) { + lpfc_sli_pcimem_bcopy(mbox, pmbox, + MAILBOX_CMD_SIZE); + } + if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { + pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; + + lpfc_debugfs_disc_trc(vport, + LPFC_DISC_TRC_MBOX_VPORT, + "MBOX dflt rpi: : " + "status:x%x rpi:x%x", + (uint32_t)pmbox->mbxStatus, + pmbox->un.varWords[0], 0); + + if (!pmbox->mbxStatus) { + mp = (struct lpfc_dmabuf *) + (pmb->context1); + ndlp = (struct lpfc_nodelist *) + pmb->context2; + + /* Reg_LOGIN of dflt RPI was + * successful. new lets get + * rid of the RPI using the + * same mbox buffer. + */ + lpfc_unreg_login(phba, + vport->vpi, + pmbox->un.varWords[0], + pmb); + pmb->mbox_cmpl = + lpfc_mbx_cmpl_dflt_rpi; + pmb->context1 = mp; + pmb->context2 = ndlp; + pmb->vport = vport; + spin_lock(&phba->hbalock); + phba->sli.sli_flag &= + ~LPFC_SLI_MBOX_ACTIVE; + spin_unlock(&phba->hbalock); + goto send_current_mbox; + } } + spin_lock(&phba->pport->work_port_lock); + phba->pport->work_port_events &= + ~WORKER_MBOX_TMO; + spin_unlock(&phba->pport->work_port_lock); + lpfc_mbox_cmpl_put(phba, pmb); } - spin_lock(&phba->pport->work_port_lock); - phba->pport->work_port_events &= ~WORKER_MBOX_TMO; - spin_unlock(&phba->pport->work_port_lock); - lpfc_mbox_cmpl_put(phba, pmb); } if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active == NULL)) { |