diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_scsi.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 798 |
1 files changed, 586 insertions, 212 deletions
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 74b8710e1e9..8523b278ec9 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -24,6 +24,8 @@ #include <linux/export.h> #include <linux/delay.h> #include <asm/unaligned.h> +#include <linux/crc-t10dif.h> +#include <net/checksum.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -48,7 +50,7 @@ #define LPFC_RESET_WAIT 2 #define LPFC_ABORT_WAIT 2 -int _dump_buf_done; +int _dump_buf_done = 1; static char *dif_op_str[] = { "PROT_NORMAL", @@ -66,6 +68,10 @@ struct scsi_dif_tuple { __be32 ref_tag; /* Target LBA or indirect LBA */ }; +#if !defined(SCSI_PROT_GUARD_CHECK) || !defined(SCSI_PROT_REF_CHECK) +#define scsi_prot_flagged(sc, flg) sc +#endif + static void lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); static void @@ -534,7 +540,16 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl; uint16_t iotag; - int bcnt; + int bcnt, bpl_size; + + bpl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp), bpl_size); for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); @@ -759,7 +774,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, struct list_head *post_sblist, int sb_count) { struct lpfc_scsi_buf *psb, *psb_next; - int status; + int status, sgl_size; int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0; dma_addr_t pdma_phys_bpl1; int last_xritag = NO_XRI; @@ -771,6 +786,9 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, if (sb_count <= 0) return -EINVAL; + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + list_for_each_entry_safe(psb, psb_next, post_sblist, list) { list_del_init(&psb->list); block_cnt++; @@ -803,7 +821,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, post_cnt = block_cnt; } else if (block_cnt == 1) { /* last single sgl with non-contiguous xri */ - if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) + if (sgl_size > SGL_PAGE_SIZE) pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE; else @@ -885,9 +903,12 @@ lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) int num_posted, rc = 0; /* get all SCSI buffers need to repost to a local list */ - spin_lock_irq(&phba->scsi_buf_list_lock); - list_splice_init(&phba->lpfc_scsi_buf_list, &post_sblist); - spin_unlock_irq(&phba->scsi_buf_list_lock); + spin_lock_irq(&phba->scsi_buf_list_get_lock); + spin_lock_irq(&phba->scsi_buf_list_put_lock); + list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist); + list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist); + spin_unlock_irq(&phba->scsi_buf_list_put_lock); + spin_unlock_irq(&phba->scsi_buf_list_get_lock); /* post the list of scsi buffer sgls to port if available */ if (!list_empty(&post_sblist)) { @@ -923,13 +944,22 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) IOCB_t *iocb; dma_addr_t pdma_phys_fcp_cmd; dma_addr_t pdma_phys_fcp_rsp; - dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; + dma_addr_t pdma_phys_bpl; uint16_t iotag, lxri = 0; - int bcnt, num_posted; + int bcnt, num_posted, sgl_size; LIST_HEAD(prep_sblist); LIST_HEAD(post_sblist); LIST_HEAD(scsi_sblist); + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp)); + for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); if (!psb) @@ -948,6 +978,15 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) } memset(psb->data, 0, phba->cfg_sg_dma_buf_size); + /* Page alignment is CRITICAL, double check to be sure */ + if (((unsigned long)(psb->data) & + (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); + kfree(psb); + break; + } + /* Allocate iotag for psb->cur_iocbq. */ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); if (iotag == 0) { @@ -968,17 +1007,14 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; psb->fcp_bpl = psb->data; - psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + psb->fcp_cmnd = (psb->data + sgl_size); psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd + sizeof(struct fcp_cmnd)); /* Initialize local short-hand pointers. */ sgl = (struct sli4_sge *)psb->fcp_bpl; pdma_phys_bpl = psb->dma_handle; - pdma_phys_fcp_cmd = - (psb->dma_handle + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size); pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd); /* @@ -1020,17 +1056,13 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) iocb->ulpLe = 1; iocb->ulpClass = CLASS3; psb->cur_iocbq.context1 = psb; - if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) - pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE; - else - pdma_phys_bpl1 = 0; psb->dma_phys_bpl = pdma_phys_bpl; /* add the scsi buffer to a post list */ list_add_tail(&psb->list, &post_sblist); - spin_lock_irq(&phba->scsi_buf_list_lock); + spin_lock_irq(&phba->scsi_buf_list_get_lock); phba->sli4_hba.scsi_xri_cnt++; - spin_unlock_irq(&phba->scsi_buf_list_lock); + spin_unlock_irq(&phba->scsi_buf_list_get_lock); } lpfc_printf_log(phba, KERN_INFO, LOG_BG, "3021 Allocate %d out of %d requested new SCSI " @@ -1079,17 +1111,23 @@ static struct lpfc_scsi_buf* lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) { struct lpfc_scsi_buf * lpfc_cmd = NULL; - struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list; - unsigned long iflag = 0; - - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); - list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list); - if (lpfc_cmd) { - lpfc_cmd->seg_cnt = 0; - lpfc_cmd->nonsg_phys = 0; - lpfc_cmd->prot_seg_cnt = 0; + struct list_head *scsi_buf_list_get = &phba->lpfc_scsi_buf_list_get; + unsigned long gflag = 0; + unsigned long pflag = 0; + + spin_lock_irqsave(&phba->scsi_buf_list_get_lock, gflag); + list_remove_head(scsi_buf_list_get, lpfc_cmd, struct lpfc_scsi_buf, + list); + if (!lpfc_cmd) { + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, pflag); + list_splice(&phba->lpfc_scsi_buf_list_put, + &phba->lpfc_scsi_buf_list_get); + INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put); + list_remove_head(scsi_buf_list_get, lpfc_cmd, + struct lpfc_scsi_buf, list); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, pflag); } - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, gflag); return lpfc_cmd; } /** @@ -1107,28 +1145,39 @@ static struct lpfc_scsi_buf* lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) { struct lpfc_scsi_buf *lpfc_cmd ; - unsigned long iflag = 0; + unsigned long gflag = 0; + unsigned long pflag = 0; int found = 0; - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); - list_for_each_entry(lpfc_cmd, &phba->lpfc_scsi_buf_list, - list) { + spin_lock_irqsave(&phba->scsi_buf_list_get_lock, gflag); + list_for_each_entry(lpfc_cmd, &phba->lpfc_scsi_buf_list_get, list) { if (lpfc_test_rrq_active(phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag)) continue; list_del(&lpfc_cmd->list); found = 1; - lpfc_cmd->seg_cnt = 0; - lpfc_cmd->nonsg_phys = 0; - lpfc_cmd->prot_seg_cnt = 0; break; } - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, - iflag); + if (!found) { + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, pflag); + list_splice(&phba->lpfc_scsi_buf_list_put, + &phba->lpfc_scsi_buf_list_get); + INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, pflag); + list_for_each_entry(lpfc_cmd, &phba->lpfc_scsi_buf_list_get, + list) { + if (lpfc_test_rrq_active( + phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag)) + continue; + list_del(&lpfc_cmd->list); + found = 1; + break; + } + } + spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, gflag); if (!found) return NULL; - else - return lpfc_cmd; + return lpfc_cmd; } /** * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA @@ -1160,10 +1209,15 @@ lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { unsigned long iflag = 0; - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); + psb->seg_cnt = 0; + psb->nonsg_phys = 0; + psb->prot_seg_cnt = 0; + + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag); psb->pCmd = NULL; - list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + psb->cur_iocbq.iocb_flag = LPFC_IO_FCP; + list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag); } /** @@ -1181,6 +1235,10 @@ lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { unsigned long iflag = 0; + psb->seg_cnt = 0; + psb->nonsg_phys = 0; + psb->prot_seg_cnt = 0; + if (psb->exch_busy) { spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); @@ -1190,11 +1248,11 @@ lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); } else { - - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); psb->pCmd = NULL; - list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + psb->cur_iocbq.iocb_flag = LPFC_IO_FCP; + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag); + list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag); } } @@ -1268,6 +1326,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -2013,9 +2072,21 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); bf_set(pde6_optx, pde6, txop); bf_set(pde6_oprx, pde6, rxop); + + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ if (datadir == DMA_FROM_DEVICE) { - bf_set(pde6_ce, pde6, checking); - bf_set(pde6_re, pde6, checking); + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); } bf_set(pde6_ai, pde6, 1); bf_set(pde6_ae, pde6, 0); @@ -2145,6 +2216,10 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, split_offset = 0; do { + /* Check to see if we ran out of space */ + if (num_bde >= (phba->cfg_total_seg_cnt - 2)) + return num_bde + 3; + /* setup PDE5 with what we have */ pde5 = (struct lpfc_pde5 *) bpl; memset(pde5, 0, sizeof(struct lpfc_pde5)); @@ -2164,8 +2239,17 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); bf_set(pde6_optx, pde6, txop); bf_set(pde6_oprx, pde6, rxop); - bf_set(pde6_ce, pde6, checking); - bf_set(pde6_re, pde6, checking); + + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); + bf_set(pde6_ai, pde6, 1); bf_set(pde6_ae, pde6, 0); bf_set(pde6_apptagval, pde6, 0); @@ -2213,6 +2297,10 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_bde >= phba->cfg_total_seg_cnt) + return num_bde + 1; + if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9065 BLKGRD:%s Invalid data segment\n", @@ -2324,7 +2412,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct sli4_sge_diseed *diseed = NULL; dma_addr_t physaddr; int i = 0, num_sge = 0, status; - int datadir = sc->sc_data_direction; uint32_t reftag; unsigned blksize; uint8_t txop, rxop; @@ -2362,13 +2449,26 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, diseed->ref_tag = cpu_to_le32(reftag); diseed->ref_tag_tran = diseed->ref_tag; + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + } + /* setup DISEED with the rest of the info */ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); - if (datadir == DMA_FROM_DEVICE) { - bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); - bf_set(lpfc_sli4_sge_dif_re, diseed, checking); - } + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); bf_set(lpfc_sli4_sge_dif_me, diseed, 0); @@ -2497,6 +2597,10 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, split_offset = 0; do { + /* Check to see if we ran out of space */ + if (num_sge >= (phba->cfg_total_seg_cnt - 2)) + return num_sge + 3; + /* setup DISEED with what we have */ diseed = (struct sli4_sge_diseed *) sgl; memset(diseed, 0, sizeof(struct sli4_sge_diseed)); @@ -2506,11 +2610,34 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, diseed->ref_tag = cpu_to_le32(reftag); diseed->ref_tag_tran = diseed->ref_tag; + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) { + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + + } else { + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + /* + * When in this mode, the hardware will replace + * the guard tag from the host with a + * newly generated good CRC for the wire. + * Switch to raw mode here to avoid this + * behavior. What the host sends gets put on the wire. + */ + if (txop == BG_OP_IN_CRC_OUT_CRC) { + txop = BG_OP_RAW_MODE; + rxop = BG_OP_RAW_MODE; + } + } + + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + /* setup DISEED with the rest of the info */ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); - bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); - bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); bf_set(lpfc_sli4_sge_dif_me, diseed, 0); @@ -2556,6 +2683,10 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_sge >= phba->cfg_total_seg_cnt) + return num_sge + 1; + if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9086 BLKGRD:%s Invalid data segment\n", @@ -2670,6 +2801,47 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) } /** + * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be adjusted. + * + * Adjust the data length to account for how much data + * is actually on the wire. + * + * returns the adjusted data length + **/ +static int +lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *sc = lpfc_cmd->pCmd; + int fcpdl; + + fcpdl = scsi_bufflen(sc); + + /* Check if there is protection data on the wire */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + /* Read */ + if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) + return fcpdl; + + } else { + /* Write */ + if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) + return fcpdl; + } + + /* + * If we are in DIF Type 1 mode every data block has a 8 byte + * DIF (trailer) attached to it. Must ajust FCP data length. + */ + if (scsi_prot_flagged(sc, SCSI_PROT_TRANSFER_PI)) + fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8; + + return fcpdl; +} + +/** * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be prep'ed. @@ -2689,8 +2861,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, uint32_t num_bde = 0; int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; - int diflen, fcpdl; - unsigned blksize; + int fcpdl; /* * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd @@ -2711,28 +2882,28 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, return 1; lpfc_cmd->seg_cnt = datasegcnt; - if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9067 BLKGRD: %s: Too many sg segments" - " from dma_map_sg. Config %d, seg_cnt" - " %d\n", - __func__, phba->cfg_sg_seg_cnt, - lpfc_cmd->seg_cnt); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); switch (prot_group_type) { case LPFC_PG_TYPE_NO_DIF: + + /* Here we need to add a PDE5 and PDE6 to the count */ + if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt) + goto err; + num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, datasegcnt); /* we should have 2 or more entries in buffer list */ if (num_bde < 2) goto err; break; - case LPFC_PG_TYPE_DIF_BUF:{ + + case LPFC_PG_TYPE_DIF_BUF: /* * This type indicates that protection buffers are * passed to the driver, so that needs to be prepared @@ -2747,31 +2918,28 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, } lpfc_cmd->prot_seg_cnt = protsegcnt; - if (lpfc_cmd->prot_seg_cnt - > phba->cfg_prot_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9068 BLKGRD: %s: Too many prot sg " - "segments from dma_map_sg. Config %d," - "prot_seg_cnt %d\n", __func__, - phba->cfg_prot_sg_seg_cnt, - lpfc_cmd->prot_seg_cnt); - dma_unmap_sg(&phba->pcidev->dev, - scsi_prot_sglist(scsi_cmnd), - scsi_prot_sg_count(scsi_cmnd), - datadir); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* + * There is a minimun of 4 BPLs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 4) > + (phba->cfg_total_seg_cnt - 2)) + goto err; num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); /* we should have 3 or more entries in buffer list */ - if (num_bde < 3) + if ((num_bde < 3) || + (num_bde > phba->cfg_total_seg_cnt)) goto err; break; - } + case LPFC_PG_TYPE_INVALID: default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "9022 Unexpected protection group %i\n", prot_group_type); @@ -2790,18 +2958,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, iocb_cmd->ulpBdeCount = 1; iocb_cmd->ulpLe = 1; - fcpdl = scsi_bufflen(scsi_cmnd); - - if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) { - /* - * We are in DIF Type 1 mode - * Every data block has a 8 byte DIF (trailer) - * attached to it. Must ajust FCP data length - */ - blksize = lpfc_cmd_blksize(scsi_cmnd); - diflen = (fcpdl / blksize) * 8; - fcpdl += diflen; - } + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); /* @@ -2812,14 +2969,234 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, return 0; err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9023 Could not setup all needed BDE's" - "prot_group_type=%d, num_bde=%d\n", + "9023 Cannot setup S/G List for HBA" + "IO segs %d/%d BPL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, prot_group_type, num_bde); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; return 1; } /* + * This function calcuates the T10 DIF guard tag + * on the specified data using a CRC algorithmn + * using crc_t10dif. + */ +uint16_t +lpfc_bg_crc(uint8_t *data, int count) +{ + uint16_t crc = 0; + uint16_t x; + + crc = crc_t10dif(data, count); + x = cpu_to_be16(crc); + return x; +} + +/* + * This function calcuates the T10 DIF guard tag + * on the specified data using a CSUM algorithmn + * using ip_compute_csum. + */ +uint16_t +lpfc_bg_csum(uint8_t *data, int count) +{ + uint16_t ret; + + ret = ip_compute_csum(data, count); + return ret; +} + +/* + * This function examines the protection data to try to determine + * what type of T10-DIF error occurred. + */ +void +lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scatterlist *sgpe; /* s/g prot entry */ + struct scatterlist *sgde; /* s/g data entry */ + struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + struct scsi_dif_tuple *src = NULL; + uint8_t *data_src = NULL; + uint16_t guard_tag, guard_type; + uint16_t start_app_tag, app_tag; + uint32_t start_ref_tag, ref_tag; + int prot, protsegcnt; + int err_type, len, data_len; + int chk_ref, chk_app, chk_guard; + uint16_t sum; + unsigned blksize; + + err_type = BGS_GUARD_ERR_MASK; + sum = 0; + guard_tag = 0; + + /* First check to see if there is protection data to examine */ + prot = scsi_get_prot_op(cmd); + if ((prot == SCSI_PROT_READ_STRIP) || + (prot == SCSI_PROT_WRITE_INSERT) || + (prot == SCSI_PROT_NORMAL)) + goto out; + + /* Currently the driver just supports ref_tag and guard_tag checking */ + chk_ref = 1; + chk_app = 0; + chk_guard = 0; + + /* Setup a ptr to the protection data provided by the SCSI host */ + sgpe = scsi_prot_sglist(cmd); + protsegcnt = lpfc_cmd->prot_seg_cnt; + + if (sgpe && protsegcnt) { + + /* + * We will only try to verify guard tag if the segment + * data length is a multiple of the blksize. + */ + sgde = scsi_sglist(cmd); + blksize = lpfc_cmd_blksize(cmd); + data_src = (uint8_t *)sg_virt(sgde); + data_len = sgde->length; + if ((data_len & (blksize - 1)) == 0) + chk_guard = 1; + guard_type = scsi_host_get_guard(cmd->device->host); + + start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */ + start_app_tag = src->app_tag; + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + len = sgpe->length; + while (src && protsegcnt) { + while (len) { + + /* + * First check to see if a protection data + * check is valid + */ + if ((src->ref_tag == 0xffffffff) || + (src->app_tag == 0xffff)) { + start_ref_tag++; + goto skipit; + } + + /* App Tag checking */ + app_tag = src->app_tag; + if (chk_app && (app_tag != start_app_tag)) { + err_type = BGS_APPTAG_ERR_MASK; + goto out; + } + + /* Reference Tag checking */ + ref_tag = be32_to_cpu(src->ref_tag); + if (chk_ref && (ref_tag != start_ref_tag)) { + err_type = BGS_REFTAG_ERR_MASK; + goto out; + } + start_ref_tag++; + + /* Guard Tag checking */ + if (chk_guard) { + guard_tag = src->guard_tag; + if (guard_type == SHOST_DIX_GUARD_IP) + sum = lpfc_bg_csum(data_src, + blksize); + else + sum = lpfc_bg_crc(data_src, + blksize); + if ((guard_tag != sum)) { + err_type = BGS_GUARD_ERR_MASK; + goto out; + } + } +skipit: + len -= sizeof(struct scsi_dif_tuple); + if (len < 0) + len = 0; + src++; + + data_src += blksize; + data_len -= blksize; + + /* + * Are we at the end of the Data segment? + * The data segment is only used for Guard + * tag checking. + */ + if (chk_guard && (data_len == 0)) { + chk_guard = 0; + sgde = sg_next(sgde); + if (!sgde) + goto out; + + data_src = (uint8_t *)sg_virt(sgde); + data_len = sgde->length; + if ((data_len & (blksize - 1)) == 0) + chk_guard = 1; + } + } + + /* Goto the next Protection data segment */ + sgpe = sg_next(sgpe); + if (sgpe) { + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + len = sgpe->length; + } else { + src = NULL; + } + protsegcnt--; + } + } +out: + if (err_type == BGS_GUARD_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x1); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + phba->bg_guard_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9069 BLKGRD: LBA %lx grd_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + sum, guard_tag); + + } else if (err_type == BGS_REFTAG_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x3); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + + phba->bg_reftag_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9066 BLKGRD: LBA %lx ref_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + ref_tag, start_ref_tag); + + } else if (err_type == BGS_APPTAG_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x2); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + + phba->bg_apptag_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9041 BLKGRD: LBA %lx app_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + app_tag, start_app_tag); + } +} + + +/* * This function checks for BlockGuard errors detected by * the HBA. In case of errors, the ASC/ASCQ fields in the * sense buffer will be set accordingly, paired with @@ -2842,12 +3219,6 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, uint32_t bgstat = bgf->bgstat; uint64_t failing_sector = 0; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9069 BLKGRD: BG ERROR in cmd" - " 0x%x lba 0x%llx blk cnt 0x%x " - "bgstat=0x%x bghm=0x%x\n", - cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd), - blk_rq_sectors(cmd->request), bgstat, bghm); - spin_lock(&_dump_buf_lock); if (!_dump_buf_done) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9070 BLKGRD: Saving" @@ -2870,18 +3241,24 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, if (lpfc_bgs_get_invalid_prof(bgstat)) { cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9072 BLKGRD: Invalid" - " BlockGuard profile. bgstat:0x%x\n", - bgstat); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9072 BLKGRD: Invalid BG Profile in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); ret = (-1); goto out; } if (lpfc_bgs_get_uninit_dif_block(bgstat)) { cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9073 BLKGRD: " - "Invalid BlockGuard DIF Block. bgstat:0x%x\n", - bgstat); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9073 BLKGRD: Invalid BG PDIF Block in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); ret = (-1); goto out; } @@ -2894,8 +3271,12 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_guard_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9055 BLKGRD: guard_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9055 BLKGRD: Guard Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_reftag_err(bgstat)) { @@ -2907,8 +3288,12 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_reftag_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9056 BLKGRD: ref_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9056 BLKGRD: Ref Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_apptag_err(bgstat)) { @@ -2920,8 +3305,12 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_apptag_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9061 BLKGRD: app_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9061 BLKGRD: App Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_hi_water_mark_present(bgstat)) { @@ -2960,11 +3349,16 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, if (!ret) { /* No error was reported - problem in FW? */ - cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9057 BLKGRD: Unknown error reported!\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9057 BLKGRD: Unknown error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); + + /* Calcuate what type of error it was */ + lpfc_calc_bg_err(phba, lpfc_cmd); } - out: return ret; } @@ -3028,6 +3422,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -3094,45 +3489,6 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** - * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard - * @phba: The Hba for which this call is being executed. - * @lpfc_cmd: The scsi buffer which is going to be adjusted. - * - * Adjust the data length to account for how much data - * is actually on the wire. - * - * returns the adjusted data length - **/ -static int -lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, - struct lpfc_scsi_buf *lpfc_cmd) -{ - struct scsi_cmnd *sc = lpfc_cmd->pCmd; - int diflen, fcpdl; - unsigned blksize; - - fcpdl = scsi_bufflen(sc); - - /* Check if there is protection data on the wire */ - if (sc->sc_data_direction == DMA_FROM_DEVICE) { - /* Read */ - if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) - return fcpdl; - - } else { - /* Write */ - if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) - return fcpdl; - } - - /* If protection data on the wire, adjust the count accordingly */ - blksize = lpfc_cmd_blksize(sc); - diflen = (fcpdl / blksize) * 8; - fcpdl += diflen; - return fcpdl; -} - -/** * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. @@ -3149,14 +3505,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl); IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; - uint32_t num_bde = 0; + uint32_t num_sge = 0; int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; int fcpdl; /* * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd - * fcp_rsp regions to the first data bde entry + * fcp_rsp regions to the first data sge entry */ if (scsi_sg_count(scsi_cmnd)) { /* @@ -3179,28 +3535,28 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, sgl += 1; lpfc_cmd->seg_cnt = datasegcnt; - if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9087 BLKGRD: %s: Too many sg segments" - " from dma_map_sg. Config %d, seg_cnt" - " %d\n", - __func__, phba->cfg_sg_seg_cnt, - lpfc_cmd->seg_cnt); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); switch (prot_group_type) { case LPFC_PG_TYPE_NO_DIF: - num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, + /* Here we need to add a DISEED to the count */ + if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt) + goto err; + + num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, datasegcnt); + /* we should have 2 or more entries in buffer list */ - if (num_bde < 2) + if (num_sge < 2) goto err; break; - case LPFC_PG_TYPE_DIF_BUF:{ + + case LPFC_PG_TYPE_DIF_BUF: /* * This type indicates that protection buffers are * passed to the driver, so that needs to be prepared @@ -3215,31 +3571,28 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, } lpfc_cmd->prot_seg_cnt = protsegcnt; - if (lpfc_cmd->prot_seg_cnt - > phba->cfg_prot_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9088 BLKGRD: %s: Too many prot sg " - "segments from dma_map_sg. Config %d," - "prot_seg_cnt %d\n", __func__, - phba->cfg_prot_sg_seg_cnt, - lpfc_cmd->prot_seg_cnt); - dma_unmap_sg(&phba->pcidev->dev, - scsi_prot_sglist(scsi_cmnd), - scsi_prot_sg_count(scsi_cmnd), - datadir); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + /* + * There is a minimun of 3 SGEs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 3) > + (phba->cfg_total_seg_cnt - 2)) + goto err; - num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, + num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, datasegcnt, protsegcnt); + /* we should have 3 or more entries in buffer list */ - if (num_bde < 3) + if ((num_sge < 3) || + (num_sge > phba->cfg_total_seg_cnt)) goto err; break; - } + case LPFC_PG_TYPE_INVALID: default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "9083 Unexpected protection group %i\n", prot_group_type); @@ -3263,7 +3616,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, } fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); - fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); /* @@ -3274,10 +3626,22 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, return 0; err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9084 Could not setup all needed BDE's" - "prot_group_type=%d, num_bde=%d\n", - prot_group_type, num_bde); + "9084 Cannot setup S/G List for HBA" + "IO segs %d/%d SGL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, + prot_group_type, num_sge); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; return 1; } @@ -4357,7 +4721,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { if (vport->phba->cfg_enable_bg) { - lpfc_printf_vlog(vport, KERN_INFO, LOG_BG, + lpfc_printf_vlog(vport, + KERN_INFO, LOG_SCSI_CMD, "9033 BLKGRD: rcvd %s cmd:x%x " "sector x%llx cnt %u pt %x\n", dif_op_str[scsi_get_prot_op(cmnd)], @@ -4369,7 +4734,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); } else { if (vport->phba->cfg_enable_bg) { - lpfc_printf_vlog(vport, KERN_INFO, LOG_BG, + lpfc_printf_vlog(vport, + KERN_INFO, LOG_SCSI_CMD, "9038 BLKGRD: rcvd PROT_NORMAL cmd: " "x%x sector x%llx cnt %u pt %x\n", cmnd->cmnd[0], @@ -4542,7 +4908,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) /* Wait for abort to complete */ wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd), - (2*vport->cfg_devloss_tmo*HZ)); + msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000)); lpfc_cmd->waitq = NULL; if (lpfc_cmd->pCmd == cmnd) { @@ -5012,16 +5378,24 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; int rc, ret = SUCCESS; + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "3172 SCSI layer issued Host Reset Data:\n"); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); rc = lpfc_sli_brdrestart(phba); if (rc) ret = FAILED; - lpfc_online(phba); + rc = lpfc_online(phba); + if (rc) + ret = FAILED; lpfc_unblock_mgmt_io(phba); - lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "3172 SCSI layer issued Host Reset Data: x%x\n", ret); + if (ret == FAILED) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "3323 Failed host reset, bring it offline\n"); + lpfc_sli4_offline_eratt(phba); + } return ret; } @@ -5088,11 +5462,11 @@ lpfc_slave_alloc(struct scsi_device *sdev) } num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc); if (num_to_alloc != num_allocated) { - lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, - "0708 Allocation request of %d " - "command buffers did not succeed. " - "Allocated %d buffers.\n", - num_to_alloc, num_allocated); + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "0708 Allocation request of %d " + "command buffers did not succeed. " + "Allocated %d buffers.\n", + num_to_alloc, num_allocated); } if (num_allocated > 0) phba->total_scsi_bufs += num_allocated; |