diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 30 |
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 226920d15ea..b8eb1b6e5e7 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3006,6 +3006,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, struct lpfc_vport *vport; struct lpfc_nodelist *ndlp; struct Scsi_Host *shost; + uint32_t link_state; phba->fc_eventTag = acqe_fcoe->event_tag; phba->fcoe_eventtag = acqe_fcoe->event_tag; @@ -3052,9 +3053,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, break; /* * Currently, driver support only one FCF - so treat this as - * a link down. + * a link down, but save the link state because we don't want + * it to be changed to Link Down unless it is already down. */ + link_state = phba->link_state; lpfc_linkdown(phba); + phba->link_state = link_state; /* Unregister FCF if no devices connected to it */ lpfc_unregister_unused_fcf(phba); break; @@ -4506,9 +4510,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of Bar0 and Bar2 and the number of bytes * required by each mapping. @@ -6021,9 +6029,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the * number of bytes required by each mapping. They are actually @@ -7218,8 +7230,6 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2711 PCI channel permanent disable for failure\n"); - /* Block all SCSI devices' I/Os on the host */ - lpfc_scsi_dev_block(phba); /* Clean up all driver's outstanding SCSI I/Os */ lpfc_sli_flush_fcp_rings(phba); } @@ -7248,6 +7258,9 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + switch (state) { case pci_channel_io_normal: /* Non-fatal error, prepare for recovery */ @@ -7499,6 +7512,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) error = -ENODEV; goto out_free_sysfs_attr; } + /* Default to single FCP EQ for non-MSI-X */ + if (phba->intr_type != MSIX) + phba->cfg_fcp_eq_count = 1; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |