diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 685 |
1 files changed, 541 insertions, 144 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 909be3301bb..4c77038c8f1 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -45,6 +45,12 @@ #include "lpfc_vport.h" #include "lpfc_version.h" +char *_dump_buf_data; +unsigned long _dump_buf_data_order; +char *_dump_buf_dif; +unsigned long _dump_buf_dif_order; +spinlock_t _dump_buf_lock; + static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int); static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); static int lpfc_post_rcv_buf(struct lpfc_hba *); @@ -236,6 +242,51 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** + * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox + * command used for getting wake up parameters. + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * This is the completion handler for dump mailbox command for getting + * wake up parameters. When this command complete, the response contain + * Option rom version of the HBA. This function translate the version number + * into a human readable string and store it in OptionROMVersion. + **/ +static void +lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct prog_id *prg; + uint32_t prog_id_word; + char dist = ' '; + /* character array used for decoding dist type. */ + char dist_char[] = "nabx"; + + if (pmboxq->mb.mbxStatus != MBX_SUCCESS) { + mempool_free(pmboxq, phba->mbox_mem_pool); + return; + } + + prg = (struct prog_id *) &prog_id_word; + + /* word 7 contain option rom version */ + prog_id_word = pmboxq->mb.un.varWords[7]; + + /* Decode the Option rom version word to a readable string */ + if (prg->dist < 4) + dist = dist_char[prg->dist]; + + if ((prg->dist == 3) && (prg->num == 0)) + sprintf(phba->OptionROMVersion, "%d.%d%d", + prg->ver, prg->rev, prg->lev); + else + sprintf(phba->OptionROMVersion, "%d.%d%d%c%d", + prg->ver, prg->rev, prg->lev, + dist, prg->num); + mempool_free(pmboxq, phba->mbox_mem_pool); + return; +} + +/** * lpfc_config_port_post: Perform lpfc initialization after config port. * @phba: pointer to lpfc hba data structure. * @@ -482,6 +533,20 @@ lpfc_config_port_post(struct lpfc_hba *phba) rc); mempool_free(pmb, phba->mbox_mem_pool); } + + /* Get Option rom version */ + pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + lpfc_dump_wakeup_param(phba, pmb); + pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl; + pmb->vport = phba->pport; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + + if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed " + "to get Option ROM version status x%x\n.", rc); + mempool_free(pmb, phba->mbox_mem_pool); + } + return 0; } @@ -686,11 +751,6 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) return; spin_lock_irq(&phba->pport->work_port_lock); - /* If the timer is already canceled do nothing */ - if (!(phba->pport->work_port_events & WORKER_HB_TMO)) { - spin_unlock_irq(&phba->pport->work_port_lock); - return; - } if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ, jiffies)) { @@ -833,8 +893,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(board_event), (char *) &board_event, - SCSI_NL_VID_TYPE_PCI - | PCI_VENDOR_ID_EMULEX); + LPFC_NL_VENDOR_ID); if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ @@ -1984,6 +2043,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) shost->max_lun = vport->cfg_max_luns; shost->this_id = -1; shost->max_cmd_len = 16; + /* * Set initial can_queue value since 0 is no longer supported and * scsi_add_host will fail. This will be adjusted later based on the @@ -2042,8 +2102,6 @@ destroy_port(struct lpfc_vport *vport) struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_hba *phba = vport->phba; - kfree(vport->vname); - lpfc_debugfs_terminate(vport); fc_remove_host(shost); scsi_remove_host(shost); @@ -2226,8 +2284,7 @@ lpfc_enable_msix(struct lpfc_hba *phba) ARRAY_SIZE(phba->msix_entries)); if (rc) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0420 Enable MSI-X failed (%d), continuing " - "with MSI\n", rc); + "0420 PCI enable MSI-X failed (%d)\n", rc); goto msi_fail_out; } else for (i = 0; i < LPFC_MSIX_VECTORS; i++) @@ -2244,9 +2301,9 @@ lpfc_enable_msix(struct lpfc_hba *phba) rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler, IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba); if (rc) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0421 MSI-X slow-path request_irq failed " - "(%d), continuing with MSI\n", rc); + "(%d)\n", rc); goto msi_fail_out; } @@ -2255,9 +2312,9 @@ lpfc_enable_msix(struct lpfc_hba *phba) IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba); if (rc) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0429 MSI-X fast-path request_irq failed " - "(%d), continuing with MSI\n", rc); + "(%d)\n", rc); goto irq_fail_out; } @@ -2278,7 +2335,7 @@ lpfc_enable_msix(struct lpfc_hba *phba) goto mbx_fail_out; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, "0351 Config MSI mailbox command failed, " "mbxCmd x%x, mbxStatus x%x\n", pmb->mb.mbxCommand, pmb->mb.mbxStatus); @@ -2327,6 +2384,195 @@ lpfc_disable_msix(struct lpfc_hba *phba) } /** + * lpfc_enable_msi: Enable MSI interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to enable the MSI interrupt mode. The kernel + * function pci_enable_msi() is called to enable the MSI vector. The + * device driver is responsible for calling the request_irq() to register + * MSI vector with a interrupt the handler, which is done in this function. + * + * Return codes + * 0 - sucessful + * other values - error + */ +static int +lpfc_enable_msi(struct lpfc_hba *phba) +{ + int rc; + + rc = pci_enable_msi(phba->pcidev); + if (!rc) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0462 PCI enable MSI mode success.\n"); + else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0471 PCI enable MSI mode failed (%d)\n", rc); + return rc; + } + + rc = request_irq(phba->pcidev->irq, lpfc_intr_handler, + IRQF_SHARED, LPFC_DRIVER_NAME, phba); + if (rc) { + pci_disable_msi(phba->pcidev); + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "0478 MSI request_irq failed (%d)\n", rc); + } + return rc; +} + +/** + * lpfc_disable_msi: Disable MSI interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to disable the MSI interrupt mode. The driver + * calls free_irq() on MSI vector it has done request_irq() on before + * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and + * a device will be left with MSI enabled and leaks its vector. + */ + +static void +lpfc_disable_msi(struct lpfc_hba *phba) +{ + free_irq(phba->pcidev->irq, phba); + pci_disable_msi(phba->pcidev); + return; +} + +/** + * lpfc_log_intr_mode: Log the active interrupt mode + * @phba: pointer to lpfc hba data structure. + * @intr_mode: active interrupt mode adopted. + * + * This routine it invoked to log the currently used active interrupt mode + * to the device. + */ +static void +lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) +{ + switch (intr_mode) { + case 0: + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0470 Enable INTx interrupt mode.\n"); + break; + case 1: + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0481 Enabled MSI interrupt mode.\n"); + break; + case 2: + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0480 Enabled MSI-X interrupt mode.\n"); + break; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0482 Illegal interrupt mode.\n"); + break; + } + return; +} + +static void +lpfc_stop_port(struct lpfc_hba *phba) +{ + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + /* Clear all pending interrupts */ + writel(0xffffffff, phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + + /* Reset some HBA SLI setup states */ + lpfc_stop_phba_timers(phba); + phba->pport->work_port_events = 0; + + return; +} + +/** + * lpfc_enable_intr: Enable device interrupt. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to enable device interrupt and associate driver's + * interrupt handler(s) to interrupt vector(s). Depends on the interrupt + * mode configured to the driver, the driver will try to fallback from the + * configured interrupt mode to an interrupt mode which is supported by the + * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ. + * + * Return codes + * 0 - sucessful + * other values - error + **/ +static uint32_t +lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) +{ + uint32_t intr_mode = LPFC_INTR_ERROR; + int retval; + + if (cfg_mode == 2) { + /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ + retval = lpfc_sli_config_port(phba, 3); + if (!retval) { + /* Now, try to enable MSI-X interrupt mode */ + retval = lpfc_enable_msix(phba); + if (!retval) { + /* Indicate initialization to MSI-X mode */ + phba->intr_type = MSIX; + intr_mode = 2; + } + } + } + + /* Fallback to MSI if MSI-X initialization failed */ + if (cfg_mode >= 1 && phba->intr_type == NONE) { + retval = lpfc_enable_msi(phba); + if (!retval) { + /* Indicate initialization to MSI mode */ + phba->intr_type = MSI; + intr_mode = 1; + } + } + + /* Fallback to INTx if both MSI-X/MSI initalization failed */ + if (phba->intr_type == NONE) { + retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, + IRQF_SHARED, LPFC_DRIVER_NAME, phba); + if (!retval) { + /* Indicate initialization to INTx mode */ + phba->intr_type = INTx; + intr_mode = 0; + } + } + return intr_mode; +} + +/** + * lpfc_disable_intr: Disable device interrupt. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to disable device interrupt and disassociate the + * driver's interrupt handler(s) from interrupt vector(s). Depending on the + * interrupt mode, the driver will release the interrupt vector(s) for the + * message signaled interrupt. + **/ +static void +lpfc_disable_intr(struct lpfc_hba *phba) +{ + /* Disable the currently initialized interrupt mode */ + if (phba->intr_type == MSIX) + lpfc_disable_msix(phba); + else if (phba->intr_type == MSI) + lpfc_disable_msi(phba); + else if (phba->intr_type == INTx) + free_irq(phba->pcidev->irq, phba); + + /* Reset interrupt management states */ + phba->intr_type = NONE; + phba->sli.slistat.sli_intr = 0; + + return; +} + +/** * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier @@ -2356,6 +2602,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) int error = -ENODEV, retval; int i, hbq_count; uint16_t iotag; + uint32_t cfg_mode, intr_mode; int bars = pci_select_bars(pdev, IORESOURCE_MEM); struct lpfc_adapter_event_header adapter_event; @@ -2409,6 +2656,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->eratt_poll.data = (unsigned long) phba; pci_set_master(pdev); + pci_save_state(pdev); pci_try_set_mwi(pdev); if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0) @@ -2557,7 +2805,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_debugfs_initialize(vport); pci_set_drvdata(pdev, shost); - phba->intr_type = NONE; phba->MBslimaddr = phba->slim_memmap_p; phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; @@ -2565,63 +2812,58 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; - /* Configure and enable interrupt */ - if (phba->cfg_use_msi == 2) { - /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ - error = lpfc_sli_config_port(phba, 3); - if (error) - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0427 Firmware not capable of SLI 3 mode.\n"); - else { - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0426 Firmware capable of SLI 3 mode.\n"); - /* Now, try to enable MSI-X interrupt mode */ - error = lpfc_enable_msix(phba); - if (!error) { - phba->intr_type = MSIX; - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0430 enable MSI-X mode.\n"); - } - } - } - - /* Fallback to MSI if MSI-X initialization failed */ - if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { - retval = pci_enable_msi(phba->pcidev); - if (!retval) { - phba->intr_type = MSI; - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0473 enable MSI mode.\n"); - } else - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0452 enable IRQ mode.\n"); - } - - /* MSI-X is the only case the doesn't need to call request_irq */ - if (phba->intr_type != MSIX) { - retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, - IRQF_SHARED, LPFC_DRIVER_NAME, phba); - if (retval) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 Enable " - "interrupt handler failed\n"); - error = retval; - goto out_disable_msi; - } else if (phba->intr_type != MSI) - phba->intr_type = INTx; - } - + /* Configure sysfs attributes */ if (lpfc_alloc_sysfs_attr(vport)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "1476 Failed to allocate sysfs attr\n"); error = -ENOMEM; - goto out_free_irq; + goto out_destroy_port; } - if (lpfc_sli_hba_setup(phba)) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "1477 Failed to set up hba\n"); - error = -ENODEV; - goto out_remove_device; + cfg_mode = phba->cfg_use_msi; + while (true) { + /* Configure and enable interrupt */ + intr_mode = lpfc_enable_intr(phba, cfg_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0426 Failed to enable interrupt.\n"); + goto out_free_sysfs_attr; + } + /* HBA SLI setup */ + if (lpfc_sli_hba_setup(phba)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1477 Failed to set up hba\n"); + error = -ENODEV; + goto out_remove_device; + } + + /* Wait 50ms for the interrupts of previous mailbox commands */ + msleep(50); + /* Check active interrupts received */ + if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) { + /* Log the current active interrupt mode */ + phba->intr_mode = intr_mode; + lpfc_log_intr_mode(phba, intr_mode); + break; + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0451 Configure interrupt mode (%d) " + "failed active interrupt test.\n", + intr_mode); + if (intr_mode == 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0479 Failed to enable " + "interrupt.\n"); + error = -ENODEV; + goto out_remove_device; + } + /* Stop HBA SLI setups */ + lpfc_stop_port(phba); + /* Disable the current interrupt mode */ + lpfc_disable_intr(phba); + /* Try next level of interrupt mode */ + cfg_mode = --intr_mode; + } } /* @@ -2629,6 +2871,75 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) * the value of can_queue. */ shost->can_queue = phba->cfg_hba_queue_depth - 10; + if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) { + + if (lpfc_prot_mask && lpfc_prot_guard) { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "1478 Registering BlockGuard with the " + "SCSI layer\n"); + + scsi_host_set_prot(shost, lpfc_prot_mask); + scsi_host_set_guard(shost, lpfc_prot_guard); + } + } + + if (!_dump_buf_data) { + int pagecnt = 10; + while (pagecnt) { + spin_lock_init(&_dump_buf_lock); + _dump_buf_data = + (char *) __get_free_pages(GFP_KERNEL, pagecnt); + if (_dump_buf_data) { + printk(KERN_ERR "BLKGRD allocated %d pages for " + "_dump_buf_data at 0x%p\n", + (1 << pagecnt), _dump_buf_data); + _dump_buf_data_order = pagecnt; + memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT) + << pagecnt)); + break; + } else { + --pagecnt; + } + + } + + if (!_dump_buf_data_order) + printk(KERN_ERR "BLKGRD ERROR unable to allocate " + "memory for hexdump\n"); + + } else { + printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p" + "\n", _dump_buf_data); + } + + + if (!_dump_buf_dif) { + int pagecnt = 10; + while (pagecnt) { + _dump_buf_dif = + (char *) __get_free_pages(GFP_KERNEL, pagecnt); + if (_dump_buf_dif) { + printk(KERN_ERR "BLKGRD allocated %d pages for " + "_dump_buf_dif at 0x%p\n", + (1 << pagecnt), _dump_buf_dif); + _dump_buf_dif_order = pagecnt; + memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT) + << pagecnt)); + break; + } else { + --pagecnt; + } + + } + + if (!_dump_buf_dif_order) + printk(KERN_ERR "BLKGRD ERROR unable to allocate " + "memory for hexdump\n"); + + } else { + printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n", + _dump_buf_dif); + } lpfc_host_attrib_init(shost); @@ -2646,29 +2957,22 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(adapter_event), (char *) &adapter_event, - SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); - - scsi_scan_host(shost); + LPFC_NL_VENDOR_ID); return 0; out_remove_device: - lpfc_free_sysfs_attr(vport); spin_lock_irq(shost->host_lock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(shost->host_lock); -out_free_irq: lpfc_stop_phba_timers(phba); phba->pport->work_port_events = 0; - - if (phba->intr_type == MSIX) - lpfc_disable_msix(phba); - else - free_irq(phba->pcidev->irq, phba); - -out_disable_msi: - if (phba->intr_type == MSI) - pci_disable_msi(phba->pcidev); + lpfc_disable_intr(phba); + lpfc_sli_hba_down(phba); + lpfc_sli_brdrestart(phba); +out_free_sysfs_attr: + lpfc_free_sysfs_attr(vport); +out_destroy_port: destroy_port(vport); out_kthread_stop: kthread_stop(phba->worker_thread); @@ -2709,7 +3013,7 @@ out: * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an - * Emulex HBA is removed from PCI bus. It perform all the necessary cleanup + * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup * for the HBA device to be removed from the PCI subsystem properly. **/ static void __devexit @@ -2717,18 +3021,27 @@ lpfc_pci_remove_one(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_vport **vports; struct lpfc_hba *phba = vport->phba; + int i; int bars = pci_select_bars(pdev, IORESOURCE_MEM); spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(&phba->hbalock); - kfree(vport->vname); lpfc_free_sysfs_attr(vport); kthread_stop(phba->worker_thread); + /* Release all the vports against this physical port */ + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) + for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++) + fc_vport_terminate(vports[i]->fc_vport); + lpfc_destroy_vport_work_array(phba, vports); + + /* Remove FC host and then SCSI host with the physical port */ fc_remove_host(shost); scsi_remove_host(shost); lpfc_cleanup(vport); @@ -2748,13 +3061,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_debugfs_terminate(vport); - if (phba->intr_type == MSIX) - lpfc_disable_msix(phba); - else { - free_irq(phba->pcidev->irq, phba); - if (phba->intr_type == MSI) - pci_disable_msi(phba->pcidev); - } + /* Disable interrupt */ + lpfc_disable_intr(phba); pci_set_drvdata(pdev, NULL); scsi_host_put(shost); @@ -2786,6 +3094,115 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** + * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. + * @pdev: pointer to PCI device + * @msg: power management message + * + * This routine is to be registered to the kernel's PCI subsystem to support + * system Power Management (PM). When PM invokes this method, it quiesces the + * device by stopping the driver's worker thread for the device, turning off + * device's interrupt and DMA, and bring the device offline. Note that as the + * driver implements the minimum PM requirements to a power-aware driver's PM + * support for suspend/resume -- all the possible PM messages (SUSPEND, + * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND + * and the driver will fully reinitialize its device during resume() method + * call, the driver will set device to PCI_D3hot state in PCI config space + * instead of setting it according to the @msg provided by the PM. + * + * Return code + * 0 - driver suspended the device + * Error otherwise + **/ +static int +lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0473 PCI device Power Management suspend.\n"); + + /* Bring down the device */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + kthread_stop(phba->worker_thread); + + /* Disable interrupt from device */ + lpfc_disable_intr(phba); + + /* Save device state to PCI config space */ + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +/** + * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. + * @pdev: pointer to PCI device + * + * This routine is to be registered to the kernel's PCI subsystem to support + * system Power Management (PM). When PM invokes this method, it restores + * the device's PCI config space state and fully reinitializes the device + * and brings it online. Note that as the driver implements the minimum PM + * requirements to a power-aware driver's PM for suspend/resume -- all + * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend() + * method call will be treated as SUSPEND and the driver will fully + * reinitialize its device during resume() method call, the device will be + * set to PCI_D0 directly in PCI config space before restoring the state. + * + * Return code + * 0 - driver suspended the device + * Error otherwise + **/ +static int +lpfc_pci_resume_one(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + uint32_t intr_mode; + int error; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0452 PCI device Power Management resume.\n"); + + /* Restore device state from PCI config space */ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + if (pdev->is_busmaster) + pci_set_master(pdev); + + /* Startup the kernel thread for this host adapter. */ + phba->worker_thread = kthread_run(lpfc_do_work, phba, + "lpfc_worker_%d", phba->brd_no); + if (IS_ERR(phba->worker_thread)) { + error = PTR_ERR(phba->worker_thread); + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0434 PM resume failed to start worker " + "thread: error=x%x.\n", error); + return error; + } + + /* Configure and enable interrupt */ + intr_mode = lpfc_enable_intr(phba, phba->intr_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0430 PM resume Failed to enable interrupt\n"); + return -EIO; + } else + phba->intr_mode = intr_mode; + + /* Restart HBA and bring it online */ + lpfc_sli_brdrestart(phba); + lpfc_online(phba); + + /* Log the current active interrupt mode */ + lpfc_log_intr_mode(phba, phba->intr_mode); + + return 0; +} + +/** * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. * @pdev: pointer to PCI device. * @state: the current PCI connection state. @@ -2828,13 +3245,8 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, pring = &psli->ring[psli->fcp_ring]; lpfc_sli_abort_iocb_ring(phba, pring); - if (phba->intr_type == MSIX) - lpfc_disable_msix(phba); - else { - free_irq(phba->pcidev->irq, phba); - if (phba->intr_type == MSI) - pci_disable_msi(phba->pcidev); - } + /* Disable interrupt */ + lpfc_disable_intr(phba); /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -2862,7 +3274,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; struct lpfc_sli *psli = &phba->sli; - int error, retval; + uint32_t intr_mode; dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n"); if (pci_enable_device_mem(pdev)) { @@ -2871,61 +3283,31 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; } - pci_set_master(pdev); + pci_restore_state(pdev); + if (pdev->is_busmaster) + pci_set_master(pdev); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); - /* Enable configured interrupt method */ - phba->intr_type = NONE; - if (phba->cfg_use_msi == 2) { - /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ - error = lpfc_sli_config_port(phba, 3); - if (error) - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0478 Firmware not capable of SLI 3 mode.\n"); - else { - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0479 Firmware capable of SLI 3 mode.\n"); - /* Now, try to enable MSI-X interrupt mode */ - error = lpfc_enable_msix(phba); - if (!error) { - phba->intr_type = MSIX; - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0480 enable MSI-X mode.\n"); - } - } - } - - /* Fallback to MSI if MSI-X initialization failed */ - if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { - retval = pci_enable_msi(phba->pcidev); - if (!retval) { - phba->intr_type = MSI; - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0481 enable MSI mode.\n"); - } else - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0470 enable IRQ mode.\n"); - } - - /* MSI-X is the only case the doesn't need to call request_irq */ - if (phba->intr_type != MSIX) { - retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, - IRQF_SHARED, LPFC_DRIVER_NAME, phba); - if (retval) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0471 Enable interrupt handler " - "failed\n"); - } else if (phba->intr_type != MSI) - phba->intr_type = INTx; - } + /* Configure and enable interrupt */ + intr_mode = lpfc_enable_intr(phba, phba->intr_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0427 Cannot re-enable interrupt after " + "slot reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } else + phba->intr_mode = intr_mode; /* Take device offline; this will perform cleanup */ lpfc_offline(phba); lpfc_sli_brdrestart(phba); + /* Log the current active interrupt mode */ + lpfc_log_intr_mode(phba, phba->intr_mode); + return PCI_ERS_RESULT_RECOVERED; } @@ -3037,6 +3419,8 @@ static struct pci_driver lpfc_driver = { .id_table = lpfc_id_table, .probe = lpfc_pci_probe_one, .remove = __devexit_p(lpfc_pci_remove_one), + .suspend = lpfc_pci_suspend_one, + .resume = lpfc_pci_resume_one, .err_handler = &lpfc_err_handler, }; @@ -3100,6 +3484,19 @@ lpfc_exit(void) fc_release_transport(lpfc_transport_template); if (lpfc_enable_npiv) fc_release_transport(lpfc_vport_transport_template); + if (_dump_buf_data) { + printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_data " + "at 0x%p\n", + (1L << _dump_buf_data_order), _dump_buf_data); + free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order); + } + + if (_dump_buf_dif) { + printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_dif " + "at 0x%p\n", + (1L << _dump_buf_dif_order), _dump_buf_dif); + free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order); + } } module_init(lpfc_init); |