diff options
Diffstat (limited to 'drivers/scsi/libsas/sas_ata.c')
| -rw-r--r-- | drivers/scsi/libsas/sas_ata.c | 817 |
1 files changed, 817 insertions, 0 deletions
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c new file mode 100644 index 00000000000..ced2de32c51 --- /dev/null +++ b/drivers/scsi/libsas/sas_ata.c @@ -0,0 +1,817 @@ +/* + * Support for SATA devices on Serial Attached SCSI (SAS) controllers + * + * Copyright (C) 2006 IBM Corporation + * + * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include <linux/scatterlist.h> + +#include <scsi/sas_ata.h> +#include "sas_internal.h" +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" +#include "../scsi_transport_api.h" +#include <scsi/scsi_eh.h> + +static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) +{ + /* Cheesy attempt to translate SAS errors into ATA. Hah! */ + + /* transport error */ + if (ts->resp == SAS_TASK_UNDELIVERED) + return AC_ERR_ATA_BUS; + + /* ts->resp == SAS_TASK_COMPLETE */ + /* task delivered, what happened afterwards? */ + switch (ts->stat) { + case SAS_DEV_NO_RESPONSE: + return AC_ERR_TIMEOUT; + + case SAS_INTERRUPTED: + case SAS_PHY_DOWN: + case SAS_NAK_R_ERR: + return AC_ERR_ATA_BUS; + + + case SAS_DATA_UNDERRUN: + /* + * Some programs that use the taskfile interface + * (smartctl in particular) can cause underrun + * problems. Ignore these errors, perhaps at our + * peril. + */ + return 0; + + case SAS_DATA_OVERRUN: + case SAS_QUEUE_FULL: + case SAS_DEVICE_UNKNOWN: + case SAS_SG_ERR: + return AC_ERR_INVALID; + + case SAM_CHECK_COND: + case SAS_OPEN_TO: + case SAS_OPEN_REJECT: + SAS_DPRINTK("%s: Saw error %d. What to do?\n", + __FUNCTION__, ts->stat); + return AC_ERR_OTHER; + + case SAS_ABORTED_TASK: + return AC_ERR_DEV; + + case SAS_PROTO_RESPONSE: + /* This means the ending_fis has the error + * value; return 0 here to collect it */ + return 0; + default: + return 0; + } +} + +static void sas_ata_task_done(struct sas_task *task) +{ + struct ata_queued_cmd *qc = task->uldd_task; + struct domain_device *dev; + struct task_status_struct *stat = &task->task_status; + struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; + struct sas_ha_struct *sas_ha; + enum ata_completion_errors ac; + unsigned long flags; + + if (!qc) + goto qc_already_gone; + + dev = qc->ap->private_data; + sas_ha = dev->port->ha; + + spin_lock_irqsave(dev->sata_dev.ap->lock, flags); + if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_GOOD) { + ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf); + qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + dev->sata_dev.sstatus = resp->sstatus; + dev->sata_dev.serror = resp->serror; + dev->sata_dev.scontrol = resp->scontrol; + } else if (stat->stat != SAM_STAT_GOOD) { + ac = sas_to_ata_err(stat); + if (ac) { + SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__, + stat->stat); + /* We saw a SAS error. Send a vague error. */ + qc->err_mask = ac; + dev->sata_dev.tf.feature = 0x04; /* status err */ + dev->sata_dev.tf.command = ATA_ERR; + } + } + + qc->lldd_task = NULL; + if (qc->scsicmd) + ASSIGN_SAS_TASK(qc->scsicmd, NULL); + ata_qc_complete(qc); + spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); + + /* + * If the sas_task has an ata qc, a scsi_cmnd and the aborted + * flag is set, then we must have come in via the libsas EH + * functions. When we exit this function, we need to put the + * scsi_cmnd on the list of finished errors. The ata_qc_complete + * call cleans up the libata side of things but we're protected + * from the scsi_cmnd going away because the scsi_cmnd is owned + * by the EH, making libata's call to scsi_done a NOP. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + if (qc->scsicmd && task->task_state_flags & SAS_TASK_STATE_ABORTED) + scsi_eh_finish_cmd(qc->scsicmd, &sas_ha->eh_done_q); + spin_unlock_irqrestore(&task->task_state_lock, flags); + +qc_already_gone: + list_del_init(&task->list); + sas_free_task(task); +} + +static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) +{ + int res; + struct sas_task *task; + struct domain_device *dev = qc->ap->private_data; + struct sas_ha_struct *sas_ha = dev->port->ha; + struct Scsi_Host *host = sas_ha->core.shost; + struct sas_internal *i = to_sas_internal(host->transportt); + struct scatterlist *sg; + unsigned int num = 0; + unsigned int xfer = 0; + + task = sas_alloc_task(GFP_ATOMIC); + if (!task) + return AC_ERR_SYSTEM; + task->dev = dev; + task->task_proto = SAS_PROTOCOL_STP; + task->task_done = sas_ata_task_done; + + if (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ) { + /* Need to zero out the tag libata assigned us */ + qc->tf.nsect = 0; + } + + ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); + task->uldd_task = qc; + if (is_atapi_taskfile(&qc->tf)) { + memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); + task->total_xfer_len = qc->nbytes + qc->pad_len; + task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem; + } else { + ata_for_each_sg(sg, qc) { + num++; + xfer += sg->length; + } + + task->total_xfer_len = xfer; + task->num_scatter = num; + } + + task->data_dir = qc->dma_dir; + task->scatter = qc->__sg; + task->ata_task.retry_count = 1; + task->task_state_flags = SAS_TASK_STATE_PENDING; + qc->lldd_task = task; + + switch (qc->tf.protocol) { + case ATA_PROT_NCQ: + task->ata_task.use_ncq = 1; + /* fall through */ + case ATA_PROT_ATAPI_DMA: + case ATA_PROT_DMA: + task->ata_task.dma_xfer = 1; + break; + } + + if (qc->scsicmd) + ASSIGN_SAS_TASK(qc->scsicmd, task); + + if (sas_ha->lldd_max_execute_num < 2) + res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC); + else + res = sas_queue_up(task); + + /* Examine */ + if (res) { + SAS_DPRINTK("lldd_execute_task returned: %d\n", res); + + if (qc->scsicmd) + ASSIGN_SAS_TASK(qc->scsicmd, NULL); + sas_free_task(task); + return AC_ERR_SYSTEM; + } + + return 0; +} + +static u8 sas_ata_check_status(struct ata_port *ap) +{ + struct domain_device *dev = ap->private_data; + return dev->sata_dev.tf.command; +} + +static void sas_ata_phy_reset(struct ata_port *ap) +{ + struct domain_device *dev = ap->private_data; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + int res = 0; + + if (i->dft->lldd_I_T_nexus_reset) + res = i->dft->lldd_I_T_nexus_reset(dev); + + if (res) + SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__); + + switch (dev->sata_dev.command_set) { + case ATA_COMMAND_SET: + SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__); + ap->device[0].class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__); + ap->device[0].class = ATA_DEV_ATAPI; + break; + default: + SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", + __FUNCTION__, + dev->sata_dev.command_set); + ap->device[0].class = ATA_DEV_UNKNOWN; + break; + } + + ap->cbl = ATA_CBL_SATA; +} + +static void sas_ata_post_internal(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* + * Find the sas_task and kill it. By this point, + * libata has decided to kill the qc, so we needn't + * bother with sas_ata_task_done. But we still + * ought to abort the task. + */ + struct sas_task *task = qc->lldd_task; + unsigned long flags; + + qc->lldd_task = NULL; + if (task) { + /* Should this be a AT(API) device reset? */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + task->uldd_task = NULL; + __sas_task_abort(task); + } + } +} + +static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct domain_device *dev = ap->private_data; + memcpy(tf, &dev->sata_dev.tf, sizeof (*tf)); +} + +static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + struct domain_device *dev = ap->private_data; + + SAS_DPRINTK("STUB %s\n", __FUNCTION__); + switch (sc_reg_in) { + case SCR_STATUS: + dev->sata_dev.sstatus = val; + break; + case SCR_CONTROL: + dev->sata_dev.scontrol = val; + break; + case SCR_ERROR: + dev->sata_dev.serror = val; + break; + case SCR_ACTIVE: + dev->sata_dev.ap->sactive = val; + break; + default: + return -EINVAL; + } + return 0; +} + +static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in, + u32 *val) +{ + struct domain_device *dev = ap->private_data; + + SAS_DPRINTK("STUB %s\n", __FUNCTION__); + switch (sc_reg_in) { + case SCR_STATUS: + *val = dev->sata_dev.sstatus; + return 0; + case SCR_CONTROL: + *val = dev->sata_dev.scontrol; + return 0; + case SCR_ERROR: + *val = dev->sata_dev.serror; + return 0; + case SCR_ACTIVE: + *val = dev->sata_dev.ap->sactive; + return 0; + default: + return -EINVAL; + } +} + +static struct ata_port_operations sas_sata_ops = { + .port_disable = ata_port_disable, + .check_status = sas_ata_check_status, + .check_altstatus = sas_ata_check_status, + .dev_select = ata_noop_dev_select, + .phy_reset = sas_ata_phy_reset, + .post_internal_cmd = sas_ata_post_internal, + .tf_read = sas_ata_tf_read, + .qc_prep = ata_noop_qc_prep, + .qc_issue = sas_ata_qc_issue, + .port_start = ata_sas_port_start, + .port_stop = ata_sas_port_stop, + .scr_read = sas_ata_scr_read, + .scr_write = sas_ata_scr_write +}; + +static struct ata_port_info sata_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, + .pio_mask = 0x1f, /* PIO0-4 */ + .mwdma_mask = 0x07, /* MWDMA0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sas_sata_ops +}; + +int sas_ata_init_host_and_port(struct domain_device *found_dev, + struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct ata_port *ap; + + ata_host_init(&found_dev->sata_dev.ata_host, + &ha->pcidev->dev, + sata_port_info.flags, + &sas_sata_ops); + ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host, + &sata_port_info, + shost); + if (!ap) { + SAS_DPRINTK("ata_sas_port_alloc failed.\n"); + return -ENODEV; + } + + ap->private_data = found_dev; + ap->cbl = ATA_CBL_SATA; + ap->scsi_host = shost; + found_dev->sata_dev.ap = ap; + + return 0; +} + +void sas_ata_task_abort(struct sas_task *task) +{ + struct ata_queued_cmd *qc = task->uldd_task; + struct completion *waiting; + + /* Bounce SCSI-initiated commands to the SCSI EH */ + if (qc->scsicmd) { + scsi_req_abort_cmd(qc->scsicmd); + scsi_schedule_eh(qc->scsicmd->device->host); + return; + } + + /* Internal command, fake a timeout and complete. */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + qc->flags |= ATA_QCFLAG_FAILED; + qc->err_mask |= AC_ERR_TIMEOUT; + waiting = qc->private_data; + complete(waiting); +} + +static void sas_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void sas_disc_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +#define SAS_DEV_TIMEOUT 10 + +/** + * sas_execute_task -- Basic task processing for discovery + * @task: the task to be executed + * @buffer: pointer to buffer to do I/O + * @size: size of @buffer + * @pci_dma_dir: PCI_DMA_... + */ +static int sas_execute_task(struct sas_task *task, void *buffer, int size, + int pci_dma_dir) +{ + int res = 0; + struct scatterlist *scatter = NULL; + struct task_status_struct *ts = &task->task_status; + int num_scatter = 0; + int retries = 0; + struct sas_internal *i = + to_sas_internal(task->dev->port->ha->core.shost->transportt); + + if (pci_dma_dir != PCI_DMA_NONE) { + scatter = kzalloc(sizeof(*scatter), GFP_KERNEL); + if (!scatter) + goto out; + + sg_init_one(scatter, buffer, size); + num_scatter = 1; + } + + task->task_proto = task->dev->tproto; + task->scatter = scatter; + task->num_scatter = num_scatter; + task->total_xfer_len = size; + task->data_dir = pci_dma_dir; + task->task_done = sas_disc_task_done; + if (pci_dma_dir != PCI_DMA_NONE && + sas_protocol_ata(task->task_proto)) { + task->num_scatter = pci_map_sg(task->dev->port->ha->pcidev, + task->scatter, + task->num_scatter, + task->data_dir); + } + + for (retries = 0; retries < 5; retries++) { + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_completion(&task->completion); + + task->timer.data = (unsigned long) task; + task->timer.function = sas_task_timedout; + task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ; + add_timer(&task->timer); + + res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); + if (res) { + del_timer(&task->timer); + SAS_DPRINTK("executing SAS discovery task failed:%d\n", + res); + goto ex_err; + } + wait_for_completion(&task->completion); + res = -ETASK; + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + int res2; + SAS_DPRINTK("task aborted, flags:0x%x\n", + task->task_state_flags); + res2 = i->dft->lldd_abort_task(task); + SAS_DPRINTK("came back from abort task\n"); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + if (res2 == TMF_RESP_FUNC_COMPLETE) + continue; /* Retry the task */ + else + goto ex_err; + } + } + if (task->task_status.stat == SAM_BUSY || + task->task_status.stat == SAM_TASK_SET_FULL || + task->task_status.stat == SAS_QUEUE_FULL) { + SAS_DPRINTK("task: q busy, sleeping...\n"); + schedule_timeout_interruptible(HZ); + } else if (task->task_status.stat == SAM_CHECK_COND) { + struct scsi_sense_hdr shdr; + + if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size, + &shdr)) { + SAS_DPRINTK("couldn't normalize sense\n"); + continue; + } + if ((shdr.sense_key == 6 && shdr.asc == 0x29) || + (shdr.sense_key == 2 && shdr.asc == 4 && + shdr.ascq == 1)) { + SAS_DPRINTK("device %016llx LUN: %016llx " + "powering up or not ready yet, " + "sleeping...\n", + SAS_ADDR(task->dev->sas_addr), + SAS_ADDR(task->ssp_task.LUN)); + + schedule_timeout_interruptible(5*HZ); + } else if (shdr.sense_key == 1) { + res = 0; + break; + } else if (shdr.sense_key == 5) { + break; + } else { + SAS_DPRINTK("dev %016llx LUN: %016llx " + "sense key:0x%x ASC:0x%x ASCQ:0x%x" + "\n", + SAS_ADDR(task->dev->sas_addr), + SAS_ADDR(task->ssp_task.LUN), + shdr.sense_key, + shdr.asc, shdr.ascq); + } + } else if (task->task_status.resp != SAS_TASK_COMPLETE || + task->task_status.stat != SAM_GOOD) { + SAS_DPRINTK("task finished with resp:0x%x, " + "stat:0x%x\n", + task->task_status.resp, + task->task_status.stat); + goto ex_err; + } else { + res = 0; + break; + } + } +ex_err: + if (pci_dma_dir != PCI_DMA_NONE) { + if (sas_protocol_ata(task->task_proto)) + pci_unmap_sg(task->dev->port->ha->pcidev, + task->scatter, task->num_scatter, + task->data_dir); + kfree(scatter); + } +out: + return res; +} + +/* ---------- SATA ---------- */ + +static void sas_get_ata_command_set(struct domain_device *dev) +{ + struct dev_to_host_fis *fis = + (struct dev_to_host_fis *) dev->frame_rcvd; + + if ((fis->sector_count == 1 && /* ATA */ + fis->lbal == 1 && + fis->lbam == 0 && + fis->lbah == 0 && + fis->device == 0) + || + (fis->sector_count == 0 && /* CE-ATA (mATA) */ + fis->lbal == 0 && + fis->lbam == 0xCE && + fis->lbah == 0xAA && + (fis->device & ~0x10) == 0)) + + dev->sata_dev.command_set = ATA_COMMAND_SET; + + else if ((fis->interrupt_reason == 1 && /* ATAPI */ + fis->lbal == 1 && + fis->byte_count_low == 0x14 && + fis->byte_count_high == 0xEB && + (fis->device & ~0x10) == 0)) + + dev->sata_dev.command_set = ATAPI_COMMAND_SET; + + else if ((fis->sector_count == 1 && /* SEMB */ + fis->lbal == 1 && + fis->lbam == 0x3C && + fis->lbah == 0xC3 && + fis->device == 0) + || + (fis->interrupt_reason == 1 && /* SATA PM */ + fis->lbal == 1 && + fis->byte_count_low == 0x69 && + fis->byte_count_high == 0x96 && + (fis->device & ~0x10) == 0)) + + /* Treat it as a superset? */ + dev->sata_dev.command_set = ATAPI_COMMAND_SET; +} + +/** + * sas_issue_ata_cmd -- Basic SATA command processing for discovery + * @dev: the device to send the command to + * @command: the command register + * @features: the features register + * @buffer: pointer to buffer to do I/O + * @size: size of @buffer + * @pci_dma_dir: PCI_DMA_... + */ +static int sas_issue_ata_cmd(struct domain_device *dev, u8 command, + u8 features, void *buffer, int size, + int pci_dma_dir) +{ + int res = 0; + struct sas_task *task; + struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *) + &dev->frame_rcvd[0]; + + res = -ENOMEM; + task = sas_alloc_task(GFP_KERNEL); + if (!task) + goto out; + + task->dev = dev; + + task->ata_task.fis.fis_type = 0x27; + task->ata_task.fis.command = command; + task->ata_task.fis.features = features; + task->ata_task.fis.device = d2h_fis->device; + task->ata_task.retry_count = 1; + + res = sas_execute_task(task, buffer, size, pci_dma_dir); + + sas_free_task(task); +out: + return res; +} + +static void sas_sata_propagate_sas_addr(struct domain_device *dev) +{ + unsigned long flags; + struct asd_sas_port *port = dev->port; + struct asd_sas_phy *phy; + + BUG_ON(dev->parent); + + memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); + spin_lock_irqsave(&port->phy_list_lock, flags); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); + spin_unlock_irqrestore(&port->phy_list_lock, flags); +} + +#define ATA_IDENTIFY_DEV 0xEC +#define ATA_IDENTIFY_PACKET_DEV 0xA1 +#define ATA_SET_FEATURES 0xEF +#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07 + +/** + * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV) + * @dev: STP/SATA device of interest (ATA/ATAPI) + * + * The LLDD has already been notified of this device, so that we can + * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY + * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its + * performance for this device. + */ +static int sas_discover_sata_dev(struct domain_device *dev) +{ + int res; + __le16 *identify_x; + u8 command; + + identify_x = kzalloc(512, GFP_KERNEL); + if (!identify_x) + return -ENOMEM; + + if (dev->sata_dev.command_set == ATA_COMMAND_SET) { + dev->sata_dev.identify_device = identify_x; + command = ATA_IDENTIFY_DEV; + } else { + dev->sata_dev.identify_packet_device = identify_x; + command = ATA_IDENTIFY_PACKET_DEV; + } + + res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, + PCI_DMA_FROMDEVICE); + if (res) + goto out_err; + + /* lives on the media? */ + if (le16_to_cpu(identify_x[0]) & 4) { + /* incomplete response */ + SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to " + "dev %llx\n", SAS_ADDR(dev->sas_addr)); + if (!le16_to_cpu(identify_x[83] & (1<<6))) + goto cont1; + res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES, + ATA_FEATURE_PUP_STBY_SPIN_UP, + NULL, 0, PCI_DMA_NONE); + if (res) + goto cont1; + + schedule_timeout_interruptible(5*HZ); /* More time? */ + res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, + PCI_DMA_FROMDEVICE); + if (res) + goto out_err; + } +cont1: + /* Get WWN */ + if (dev->port->oob_mode != SATA_OOB_MODE) { + memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr, + SAS_ADDR_SIZE); + } else if (dev->sata_dev.command_set == ATA_COMMAND_SET && + (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000) + == 0x5000) { + int i; + + for (i = 0; i < 4; i++) { + dev->sas_addr[2*i] = + (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8; + dev->sas_addr[2*i+1] = + le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF; + } + } + sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); + if (!dev->parent) + sas_sata_propagate_sas_addr(dev); + + /* XXX Hint: register this SATA device with SATL. + When this returns, dev->sata_dev->lu is alive and + present. + sas_satl_register_dev(dev); + */ + + sas_fill_in_rphy(dev, dev->rphy); + + return 0; +out_err: + dev->sata_dev.identify_packet_device = NULL; + dev->sata_dev.identify_device = NULL; + kfree(identify_x); + return res; +} + +static int sas_discover_sata_pm(struct domain_device *dev) +{ + return -ENODEV; +} + +/** + * sas_discover_sata -- discover an STP/SATA domain device + * @dev: pointer to struct domain_device of interest + * + * First we notify the LLDD of this device, so we can send frames to + * it. Then depending on the type of device we call the appropriate + * discover functions. Once device discover is done, we notify the + * LLDD so that it can fine-tune its parameters for the device, by + * removing it and then adding it. That is, the second time around, + * the driver would have certain fields, that it is looking at, set. + * Finally we initialize the kobj so that the device can be added to + * the system at registration time. Devices directly attached to a HA + * port, have no parents. All other devices do, and should have their + * "parent" pointer set appropriately before calling this function. + */ +int sas_discover_sata(struct domain_device *dev) +{ + int res; + + sas_get_ata_command_set(dev); + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + switch (dev->dev_type) { + case SATA_DEV: + res = sas_discover_sata_dev(dev); + break; + case SATA_PM: + res = sas_discover_sata_pm(dev); + break; + default: + break; + } + sas_notify_lldd_dev_gone(dev); + if (!res) { + sas_notify_lldd_dev_found(dev); + res = sas_rphy_add(dev->rphy); + } + + return res; +} |