aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/jazz_esp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/jazz_esp.c')
-rw-r--r--drivers/scsi/jazz_esp.c329
1 files changed, 329 insertions, 0 deletions
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
new file mode 100644
index 00000000000..a642f736cf8
--- /dev/null
+++ b/drivers/scsi/jazz_esp.c
@@ -0,0 +1,329 @@
+/*
+ * jazz_esp.c: Driver for SCSI chip on Mips Magnum Boards (JAZZ architecture)
+ *
+ * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * jazz_esp is based on David S. Miller's ESP driver and cyber_esp
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "NCR53C9x.h"
+
+#include <asm/irq.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/dma.h>
+
+#include <asm/pgtable.h>
+
+static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
+static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_dump_state(struct NCR_ESP *esp);
+static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
+static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
+static void dma_ints_off(struct NCR_ESP *esp);
+static void dma_ints_on(struct NCR_ESP *esp);
+static int dma_irq_p(struct NCR_ESP *esp);
+static int dma_ports_p(struct NCR_ESP *esp);
+static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
+static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_advance_sg (struct scsi_cmnd *sp);
+static void dma_led_off(struct NCR_ESP *);
+static void dma_led_on(struct NCR_ESP *);
+
+
+static volatile unsigned char cmd_buffer[16];
+ /* This is where all commands are put
+ * before they are trasfered to the ESP chip
+ * via PIO.
+ */
+
+int jazz_esp_detect(Scsi_Host_Template *tpnt);
+static int jazz_esp_release(struct Scsi_Host *shost)
+{
+ if (shost->irq)
+ free_irq(shost->irq, NULL);
+ if (shost->dma_channel != 0xff)
+ free_dma(shost->dma_channel);
+ if (shost->io_port && shost->n_io_port)
+ release_region(shost->io_port, shost->n_io_port);
+ scsi_unregister(shost);
+ return 0;
+}
+
+static Scsi_Host_Template driver_template = {
+ .proc_name = "jazz_esp",
+ .proc_info = &esp_proc_info,
+ .name = "ESP 100/100a/200",
+ .detect = jazz_esp_detect,
+ .slave_alloc = esp_slave_alloc,
+ .slave_destroy = esp_slave_destroy,
+ .release = jazz_esp_release,
+ .info = esp_info,
+ .queuecommand = esp_queue,
+ .eh_abort_handler = esp_abort,
+ .eh_bus_reset_handler = esp_reset,
+ .can_queue = 7,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+
+#include "scsi_module.c"
+
+/***************************************************************** Detection */
+static int jazz_esp_detect(struct scsi_host_template *tpnt)
+{
+ struct NCR_ESP *esp;
+ struct ConfigDev *esp_dev;
+
+ /*
+ * first assumption it is there:-)
+ */
+ if (1) {
+ esp_dev = 0;
+ esp = esp_allocate(tpnt, (void *) esp_dev);
+
+ /* Do command transfer with programmed I/O */
+ esp->do_pio_cmds = 1;
+
+ /* Required functions */
+ esp->dma_bytes_sent = &dma_bytes_sent;
+ esp->dma_can_transfer = &dma_can_transfer;
+ esp->dma_dump_state = &dma_dump_state;
+ esp->dma_init_read = &dma_init_read;
+ esp->dma_init_write = &dma_init_write;
+ esp->dma_ints_off = &dma_ints_off;
+ esp->dma_ints_on = &dma_ints_on;
+ esp->dma_irq_p = &dma_irq_p;
+ esp->dma_ports_p = &dma_ports_p;
+ esp->dma_setup = &dma_setup;
+
+ /* Optional functions */
+ esp->dma_barrier = 0;
+ esp->dma_drain = 0;
+ esp->dma_invalidate = 0;
+ esp->dma_irq_entry = 0;
+ esp->dma_irq_exit = 0;
+ esp->dma_poll = 0;
+ esp->dma_reset = 0;
+ esp->dma_led_off = &dma_led_off;
+ esp->dma_led_on = &dma_led_on;
+
+ /* virtual DMA functions */
+ esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
+ esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
+ esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one;
+ esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl;
+ esp->dma_advance_sg = &dma_advance_sg;
+
+
+ /* SCSI chip speed */
+ esp->cfreq = 40000000;
+
+ /*
+ * we don't give the address of DMA channel, but the number
+ * of DMA channel, so we can use the jazz DMA functions
+ *
+ */
+ esp->dregs = JAZZ_SCSI_DMA;
+
+ /* ESP register base */
+ esp->eregs = (struct ESP_regs *)(JAZZ_SCSI_BASE);
+
+ /* Set the command buffer */
+ esp->esp_command = (volatile unsigned char *)cmd_buffer;
+
+ /* get virtual dma address for command buffer */
+ esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer));
+
+ esp->irq = JAZZ_SCSI_IRQ;
+ request_irq(JAZZ_SCSI_IRQ, esp_intr, SA_INTERRUPT, "JAZZ SCSI",
+ esp->ehost);
+
+ /*
+ * FIXME, look if the scsi id is available from NVRAM
+ */
+ esp->scsi_id = 7;
+
+ /* Check for differential SCSI-bus */
+ /* What is this stuff? */
+ esp->diff = 0;
+
+ esp_initialize(esp);
+
+ printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use);
+ esps_running = esps_in_use;
+ return esps_in_use;
+ }
+ return 0;
+}
+
+/************************************************************* DMA Functions */
+static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
+{
+ return fifo_count;
+}
+
+static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp)
+{
+ /*
+ * maximum DMA size is 1MB
+ */
+ unsigned long sz = sp->SCp.this_residual;
+ if(sz > 0x100000)
+ sz = 0x100000;
+ return sz;
+}
+
+static void dma_dump_state(struct NCR_ESP *esp)
+{
+
+ ESPLOG(("esp%d: dma -- enable <%08x> residue <%08x\n",
+ esp->esp_id, vdma_get_enable((int)esp->dregs), vdma_get_residue((int)esp->dregs)));
+}
+
+static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
+{
+ dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length);
+ vdma_disable ((int)esp->dregs);
+ vdma_set_mode ((int)esp->dregs, DMA_MODE_READ);
+ vdma_set_addr ((int)esp->dregs, vaddress);
+ vdma_set_count ((int)esp->dregs, length);
+ vdma_enable ((int)esp->dregs);
+}
+
+static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
+{
+ dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length);
+ vdma_disable ((int)esp->dregs);
+ vdma_set_mode ((int)esp->dregs, DMA_MODE_WRITE);
+ vdma_set_addr ((int)esp->dregs, vaddress);
+ vdma_set_count ((int)esp->dregs, length);
+ vdma_enable ((int)esp->dregs);
+}
+
+static void dma_ints_off(struct NCR_ESP *esp)
+{
+ disable_irq(esp->irq);
+}
+
+static void dma_ints_on(struct NCR_ESP *esp)
+{
+ enable_irq(esp->irq);
+}
+
+static int dma_irq_p(struct NCR_ESP *esp)
+{
+ return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
+}
+
+static int dma_ports_p(struct NCR_ESP *esp)
+{
+ int enable = vdma_get_enable((int)esp->dregs);
+
+ return (enable & R4030_CHNL_ENABLE);
+}
+
+static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
+{
+ /*
+ * On the Sparc, DMA_ST_WRITE means "move data from device to memory"
+ * so when (write) is true, it actually means READ!
+ */
+ if(write){
+ dma_init_read(esp, addr, count);
+ } else {
+ dma_init_write(esp, addr, count);
+ }
+}
+
+static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+{
+ sp->SCp.have_data_in = vdma_alloc(CPHYSADDR(sp->SCp.buffer), sp->SCp.this_residual);
+ sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
+}
+
+static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+{
+ int sz = sp->SCp.buffers_residual;
+ struct scatterlist *sg = (struct scatterlist *) sp->SCp.buffer;
+
+ while (sz >= 0) {
+ sg[sz].dma_address = vdma_alloc(CPHYSADDR(page_address(sg[sz].page) + sg[sz].offset), sg[sz].length);
+ sz--;
+ }
+ sp->SCp.ptr=(char *)(sp->SCp.buffer->dma_address);
+}
+
+static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+{
+ vdma_free(sp->SCp.have_data_in);
+}
+
+static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
+{
+ int sz = sp->use_sg - 1;
+ struct scatterlist *sg = (struct scatterlist *)sp->buffer;
+
+ while(sz >= 0) {
+ vdma_free(sg[sz].dma_address);
+ sz--;
+ }
+}
+
+static void dma_advance_sg (struct scsi_cmnd *sp)
+{
+ sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
+}
+
+#define JAZZ_HDC_LED 0xe000d100 /* FIXME, find correct address */
+
+static void dma_led_off(struct NCR_ESP *esp)
+{
+#if 0
+ *(unsigned char *)JAZZ_HDC_LED = 0;
+#endif
+}
+
+static void dma_led_on(struct NCR_ESP *esp)
+{
+#if 0
+ *(unsigned char *)JAZZ_HDC_LED = 1;
+#endif
+}
+
+static struct scsi_host_template driver_template = {
+ .proc_name = "jazz_esp",
+ .proc_info = esp_proc_info,
+ .name = "ESP 100/100a/200",
+ .detect = jazz_esp_detect,
+ .slave_alloc = esp_slave_alloc,
+ .slave_destroy = esp_slave_destroy,
+ .release = jazz_esp_release,
+ .info = esp_info,
+ .queuecommand = esp_queue,
+ .eh_abort_handler = esp_abort,
+ .eh_bus_reset_handler = esp_reset,
+ .can_queue = 7,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+#include "scsi_module.c"
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 14:53:44 +0000