aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/isci/firmware/create_fw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/firmware/create_fw.h')
-rw-r--r--drivers/scsi/isci/firmware/create_fw.h77
1 files changed, 0 insertions, 77 deletions
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
deleted file mode 100644
index 5f298828d22..00000000000
--- a/drivers/scsi/isci/firmware/create_fw.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _CREATE_FW_H_
-#define _CREATE_FW_H_
-#include "../probe_roms.h"
-
-
-/* we are configuring for 2 SCUs */
-static const int num_elements = 2;
-
-/*
- * For all defined arrays:
- * elements 0-3 are for SCU0, ports 0-3
- * elements 4-7 are for SCU1, ports 0-3
- *
- * valid configurations for one SCU are:
- * P0 P1 P2 P3
- * ----------------
- * 0xF,0x0,0x0,0x0 # 1 x4 port
- * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
- * # ports
- * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
- * # port
- * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
- * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
- *
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value assigned to UNINIT_PARAM (255).
- */
-
-/* discovery mode type (port auto config mode by default ) */
-
-/*
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value "0000000000000000". SAS address of zero's is
- * considered invalid and will not be used.
- */
-#ifdef MPC
-static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
-static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
- {1, 2, 4, 8} };
-static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
- 0x5FCFFFFFF0000002ULL,
- 0x5FCFFFFFF0000003ULL,
- 0x5FCFFFFFF0000004ULL },
- { 0x5FCFFFFFF0000005ULL,
- 0x5FCFFFFFF0000006ULL,
- 0x5FCFFFFFF0000007ULL,
- 0x5FCFFFFFF0000008ULL } };
-#else /* APC (default) */
-static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
-static const __u8 phy_mask[2][4];
-static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL },
- { 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL } };
-#endif
-
-/* Maximum number of concurrent device spin up */
-static const int max_num_concurrent_dev_spin_up = 1;
-
-/* enable of ssc operation */
-static const int enable_ssc;
-
-/* AFE_TX_AMP_CONTROL */
-static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
-static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
-static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
-static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
-
-static const char blob_name[] = "isci_firmware.bin";
-static const char sig[] = "ISCUOEMB";
-static const unsigned char version = 0x10;
-
-#endif