diff options
Diffstat (limited to 'drivers/scsi/ipr.c')
| -rw-r--r-- | drivers/scsi/ipr.c | 34 |
1 files changed, 31 insertions, 3 deletions
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 01080b3acf5..7ed4eef8347 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -175,6 +175,8 @@ struct ipr_error_table_t ipr_error_table[] = { "Qualified success"}, {0x01080000, 1, 1, "FFFE: Soft device bus error recovered by the IOA"}, + {0x01088100, 0, 1, + "4101: Soft device bus fabric error"}, {0x01170600, 0, 1, "FFF9: Device sector reassign successful"}, {0x01170900, 0, 1, @@ -225,6 +227,8 @@ struct ipr_error_table_t ipr_error_table[] = { "3109: IOA timed out a device command"}, {0x04088000, 0, 0, "3120: SCSI bus is not operational"}, + {0x04088100, 0, 1, + "4100: Hard device bus fabric error"}, {0x04118000, 0, 1, "9000: IOA reserved area data check"}, {0x04118100, 0, 1, @@ -273,6 +277,14 @@ struct ipr_error_table_t ipr_error_table[] = { "9091: Incorrect hardware configuration change has been detected"}, {0x04678000, 0, 1, "9073: Invalid multi-adapter configuration"}, + {0x04678100, 0, 1, + "4010: Incorrect connection between cascaded expanders"}, + {0x04678200, 0, 1, + "4020: Connections exceed IOA design limits"}, + {0x04678300, 0, 1, + "4030: Incorrect multipath connection"}, + {0x04679000, 0, 1, + "4110: Unsupported enclosure function"}, {0x046E0000, 0, 1, "FFF4: Command to logical unit failed"}, {0x05240000, 1, 0, @@ -297,6 +309,8 @@ struct ipr_error_table_t ipr_error_table[] = { "9031: Array protection temporarily suspended, protection resuming"}, {0x06040600, 0, 1, "9040: Array protection temporarily suspended, protection resuming"}, + {0x06288000, 0, 1, + "3140: Device bus not ready to ready transition"}, {0x06290000, 0, 1, "FFFB: SCSI bus was reset"}, {0x06290500, 0, 0, @@ -319,6 +333,16 @@ struct ipr_error_table_t ipr_error_table[] = { "3150: SCSI bus configuration error"}, {0x06678100, 0, 1, "9074: Asymmetric advanced function disk configuration"}, + {0x06678300, 0, 1, + "4040: Incomplete multipath connection between IOA and enclosure"}, + {0x06678400, 0, 1, + "4041: Incomplete multipath connection between enclosure and device"}, + {0x06678500, 0, 1, + "9075: Incomplete multipath connection between IOA and remote IOA"}, + {0x06678600, 0, 1, + "9076: Configuration error, missing remote IOA"}, + {0x06679100, 0, 1, + "4050: Enclosure does not support a required multipath function"}, {0x06690200, 0, 1, "9041: Array protection temporarily suspended"}, {0x06698200, 0, 1, @@ -331,6 +355,10 @@ struct ipr_error_table_t ipr_error_table[] = { "9072: Link not operational transition"}, {0x066B8200, 0, 1, "9032: Array exposed but still protected"}, + {0x066B9100, 0, 1, + "4061: Multipath redundancy level got better"}, + {0x066B9200, 0, 1, + "4060: Multipath redundancy level got worse"}, {0x07270000, 0, 0, "Failure due to other device"}, {0x07278000, 0, 1, @@ -4099,8 +4127,7 @@ static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd) { struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; - if ((be32_to_cpu(ioasa->ioasc_specific) & - (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0) + if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0) return 0; memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data, @@ -4190,7 +4217,8 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, case IPR_IOASC_NR_INIT_CMD_REQUIRED: break; default: - scsi_cmd->result |= (DID_ERROR << 16); + if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR) + scsi_cmd->result |= (DID_ERROR << 16); if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res)) res->needs_sync_complete = 1; break; |