diff options
Diffstat (limited to 'drivers/scsi/bfa/include/defs/bfa_defs_status.h')
| -rw-r--r-- | drivers/scsi/bfa/include/defs/bfa_defs_status.h | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h new file mode 100644 index 00000000000..cdceaeb9f4b --- /dev/null +++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h @@ -0,0 +1,255 @@ +/* + * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. + * All rights reserved + * www.brocade.com + * + * Linux driver for Brocade Fibre Channel Host Bus Adapter. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License (GPL) Version 2 as + * published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#ifndef __BFA_DEFS_STATUS_H__ +#define __BFA_DEFS_STATUS_H__ + +/** + * API status return values + * + * NOTE: The error msgs are auto generated from the comments. Only singe line + * comments are supported + */ +enum bfa_status { + BFA_STATUS_OK = 0, /* Success */ + BFA_STATUS_FAILED = 1, /* Operation failed */ + BFA_STATUS_EINVAL = 2, /* Invalid params Check input + * parameters */ + BFA_STATUS_ENOMEM = 3, /* Out of resources */ + BFA_STATUS_ENOSYS = 4, /* Function not implemented */ + BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if + * persists, contact support */ + BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ + BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */ + BFA_STATUS_NOFLASH = 8, /* Flash not present */ + BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */ + BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ + BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ + BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted + * contact support */ + BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ + BFA_STATUS_ABORTED = 14, /* Operation aborted */ + BFA_STATUS_NODEV = 15, /* Dev is not present */ + BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */ + BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */ + BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ + BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ + BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass + * through Req */ + BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */ + BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported + * limit */ + BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed + * setting */ + BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ + BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */ + BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */ + BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */ + BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace + * SFP/cable */ + BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ + BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */ + BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */ + BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */ + BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */ + BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */ + BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */ + BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */ + BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */ + BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */ + BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */ + BFA_STATUS_EBADF = 40, /* Bad file descriptor */ + BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */ + BFA_STATUS_EIO = 42, /* I/O error */ + BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control + * operation */ + BFA_STATUS_ENXIO = 44, /* No such device or address */ + BFA_STATUS_EFOPEN = 45, /* Failed to open file */ + BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ + BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port + * first */ + BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */ + BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace + * SFP/cable */ + BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace + * SFP/cable */ + BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace + * SFP/cable */ + BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the + * rport */ + BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */ + BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */ + BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */ + BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists + * contact support */ + BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ + BFA_STATUS_MISMATCH = 58, /* Version mismatch */ + BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */ + BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable + * adapter first */ + BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC + * and if it still fails, + * contact support */ + BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped + * in OS */ + BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different + * name */ + BFA_STATUS_PENDING = 64, /* API completes asynchronously */ + BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for + * 8G HBA */ + BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for + * 4G HBA */ + BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */ + BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */ + BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */ + BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version + * mismatch */ + BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ + BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ + BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */ + BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already + * on */ + BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already + * off */ + BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */ + BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */ + BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ + BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code + * file */ + BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already + * enabled */ + BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already + * disabled */ + BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ + BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */ + BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */ + BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already + * enabled */ + BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already + * disabled */ + BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is + * enabled */ + BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */ + BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ + BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact + * support */ + BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */ + BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */ + BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */ + BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration + * key/value pair */ + BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */ + BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */ + BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */ + BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */ + BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in + * driver */ + BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */ + BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */ + BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new + * VLAN ID failed */ + BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */ + BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */ + BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be + * found */ + BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode + * only */ + BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode + * only */ + BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */ + BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ + BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please + * bring down first */ + BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */ + BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */ + BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already + * exists */ + BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part + * of another team */ + BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured. + * Delete all VLANs before + * creating team */ + BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured + * for adapters */ + BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds + * configured for adapters */ + BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for + * adapters */ + BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters + * configured for adapters */ + BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters + * configured for adapters */ + BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload + * parameters configured for + * adapters */ + BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */ + BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */ + BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be + * removed. Change primary before + * removing */ + BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports + * per team */ + BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being + * deleted */ + BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */ + BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs + * per port */ + BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not + * allowed for CNA */ + BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not + * loaded */ + BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */ + BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */ + BFA_STATUS_NO_DRIVER = 133, /* Storage/Ethernet driver not loaded */ + BFA_STATUS_INVALID_MAC = 134, /* Invalid mac address */ + BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */ + BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */ + BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port vlan (PVID) */ + BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port vlan (PVID) */ + BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */ + BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to + * Non-Zero Value */ + BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network + * Subsytem Lock Failed.Please + * try after some time */ + BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem + * handle Failed. Please try + * after some time */ + BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not + * Enabled on this port */ + BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient + * permissions to execute the BCU + * application */ + BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved Vlan name + * string. The name is not allowed + * for the normal Vlans */ + BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */ + BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthru vlan id */ + BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation + * failed */ + BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation + * failed */ + BFA_STATUS_MAX_VAL /* Unknown error code */ +}; +#define bfa_status_t enum bfa_status + +enum bfa_eproto_status { + BFA_EPROTO_BAD_ACCEPT = 0, + BFA_EPROTO_UNKNOWN_RSP = 1 +}; +#define bfa_eproto_status_t enum bfa_eproto_status + +#endif /* __BFA_DEFS_STATUS_H__ */ |