diff options
Diffstat (limited to 'drivers/scsi/bfa/bfa_ioc_cb.c')
| -rw-r--r-- | drivers/scsi/bfa/bfa_ioc_cb.c | 124 |
1 files changed, 51 insertions, 73 deletions
diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c index 324bdde7ea2..d7ac864d853 100644 --- a/drivers/scsi/bfa/bfa_ioc_cb.c +++ b/drivers/scsi/bfa/bfa_ioc_cb.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. + * Copyright (c) 2005-2010 Brocade Communications Systems, Inc. * All rights reserved * www.brocade.com * @@ -15,22 +15,15 @@ * General Public License for more details. */ -#include <bfa.h> -#include <bfa_ioc.h> -#include <bfa_fwimg_priv.h> -#include <cna/bfa_cna_trcmod.h> -#include <cs/bfa_debug.h> -#include <bfi/bfi_ioc.h> -#include <bfi/bfi_cbreg.h> -#include <log/bfa_log_hal.h> -#include <defs/bfa_defs_pci.h> +#include "bfa_ioc.h" +#include "bfi_cbreg.h" +#include "bfa_defs.h" BFA_TRC_FILE(CNA, IOC_CB); /* * forward declarations */ -static bfa_status_t bfa_ioc_cb_pll_init(struct bfa_ioc_s *ioc); static bfa_boolean_t bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc); @@ -95,6 +88,7 @@ static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = { * Host <-> LPU mailbox command/status registers */ static struct { u32 hfn, lpu; } iocreg_mbcmd[] = { + { HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT }, { HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT } }; @@ -154,6 +148,7 @@ bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc) /** * Initialize IOC to port mapping. */ + static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc) { @@ -161,6 +156,7 @@ bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc) * For crossbow, port id is same as pci function. */ ioc->port_id = bfa_ioc_pcifn(ioc); + bfa_trc(ioc, ioc->port_id); } @@ -172,87 +168,69 @@ bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix) { } -static bfa_status_t -bfa_ioc_cb_pll_init(struct bfa_ioc_s *ioc) +/** + * Cleanup hw semaphore and usecnt registers + */ +static void +bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc) { - bfa_os_addr_t rb = ioc->pcidev.pci_bar_kva; - u32 pll_sclk, pll_fclk; /* - * Hold semaphore so that nobody can access the chip during init. + * Read the hw sem reg to make sure that it is locked + * before we clear it. If it is not locked, writing 1 + * will lock it instead of clearing it. */ - bfa_ioc_sem_get(ioc->ioc_regs.ioc_init_sem_reg); + bfa_reg_read(ioc->ioc_regs.ioc_sem_reg); + bfa_ioc_hw_sem_release(ioc); +} + + + +bfa_status_t +bfa_ioc_cb_pll_init(bfa_os_addr_t rb, bfa_boolean_t fcmode) +{ + u32 pll_sclk, pll_fclk; pll_sclk = __APP_PLL_212_ENABLE | __APP_PLL_212_LRESETN | - __APP_PLL_212_P0_1(3U) | - __APP_PLL_212_JITLMT0_1(3U) | - __APP_PLL_212_CNTLMT0_1(3U); + __APP_PLL_212_P0_1(3U) | + __APP_PLL_212_JITLMT0_1(3U) | + __APP_PLL_212_CNTLMT0_1(3U); pll_fclk = __APP_PLL_400_ENABLE | __APP_PLL_400_LRESETN | - __APP_PLL_400_RSEL200500 | __APP_PLL_400_P0_1(3U) | - __APP_PLL_400_JITLMT0_1(3U) | - __APP_PLL_400_CNTLMT0_1(3U); - + __APP_PLL_400_RSEL200500 | __APP_PLL_400_P0_1(3U) | + __APP_PLL_400_JITLMT0_1(3U) | + __APP_PLL_400_CNTLMT0_1(3U); bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT); bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT); - bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU); bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU); bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU); bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU); bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU); bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU); - - bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, - __APP_PLL_212_LOGIC_SOFT_RESET); - bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, - __APP_PLL_212_BYPASS | - __APP_PLL_212_LOGIC_SOFT_RESET); - bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, - __APP_PLL_400_LOGIC_SOFT_RESET); - bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, - __APP_PLL_400_BYPASS | - __APP_PLL_400_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_212_CTL_REG, + __APP_PLL_212_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_212_CTL_REG, + __APP_PLL_212_BYPASS | + __APP_PLL_212_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_400_CTL_REG, + __APP_PLL_400_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_400_CTL_REG, + __APP_PLL_400_BYPASS | + __APP_PLL_400_LOGIC_SOFT_RESET); bfa_os_udelay(2); - bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, - __APP_PLL_212_LOGIC_SOFT_RESET); - bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, - __APP_PLL_400_LOGIC_SOFT_RESET); - - bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, - pll_sclk | __APP_PLL_212_LOGIC_SOFT_RESET); - bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, - pll_fclk | __APP_PLL_400_LOGIC_SOFT_RESET); - - /** - * Wait for PLLs to lock. - */ + bfa_reg_write(rb + APP_PLL_212_CTL_REG, + __APP_PLL_212_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_400_CTL_REG, + __APP_PLL_400_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_212_CTL_REG, + pll_sclk | __APP_PLL_212_LOGIC_SOFT_RESET); + bfa_reg_write(rb + APP_PLL_400_CTL_REG, + pll_fclk | __APP_PLL_400_LOGIC_SOFT_RESET); bfa_os_udelay(2000); bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU); bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU); - - bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk); - bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk); - - /* - * release semaphore. - */ - bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg); + bfa_reg_write((rb + APP_PLL_212_CTL_REG), pll_sclk); + bfa_reg_write((rb + APP_PLL_400_CTL_REG), pll_fclk); return BFA_STATUS_OK; } - -/** - * Cleanup hw semaphore and usecnt registers - */ -static void -bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc) -{ - - /* - * Read the hw sem reg to make sure that it is locked - * before we clear it. If it is not locked, writing 1 - * will lock it instead of clearing it. - */ - bfa_reg_read(ioc->ioc_regs.ioc_sem_reg); - bfa_ioc_hw_sem_release(ioc); -} |