diff options
Diffstat (limited to 'drivers/scsi/bfa/bfa_defs.h')
| -rw-r--r-- | drivers/scsi/bfa/bfa_defs.h | 583 |
1 files changed, 549 insertions, 34 deletions
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h index d85f93aea46..ed8d31b0188 100644 --- a/drivers/scsi/bfa/bfa_defs.h +++ b/drivers/scsi/bfa/bfa_defs.h @@ -40,7 +40,12 @@ enum { BFA_MFG_TYPE_ASTRA = 807, /* Astra mezz card */ BFA_MFG_TYPE_LIGHTNING_P0 = 902, /* Lightning mezz card - old */ BFA_MFG_TYPE_LIGHTNING = 1741, /* Lightning mezz card */ - BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */ + BFA_MFG_TYPE_PROWLER_F = 1560, /* Prowler FC only cards */ + BFA_MFG_TYPE_PROWLER_N = 1410, /* Prowler NIC only cards */ + BFA_MFG_TYPE_PROWLER_C = 1710, /* Prowler CNA only cards */ + BFA_MFG_TYPE_PROWLER_D = 1860, /* Prowler Dual cards */ + BFA_MFG_TYPE_CHINOOK = 1867, /* Chinook cards */ + BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */ }; #pragma pack(1) @@ -53,7 +58,8 @@ enum { (type) == BFA_MFG_TYPE_WANCHESE || \ (type) == BFA_MFG_TYPE_ASTRA || \ (type) == BFA_MFG_TYPE_LIGHTNING_P0 || \ - (type) == BFA_MFG_TYPE_LIGHTNING)) + (type) == BFA_MFG_TYPE_LIGHTNING || \ + (type) == BFA_MFG_TYPE_CHINOOK)) /* * Check if the card having old wwn/mac handling @@ -124,30 +130,53 @@ enum bfa_status { BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists, * contact support */ BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ + BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ + BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ + BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */ BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ + BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */ + BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */ BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */ BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */ BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */ BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ + BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */ BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ + BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */ BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ + BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port */ BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */ BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists * contact support */ BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ + BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled */ + BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational */ + BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */ BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ + BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ + BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ + BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */ + BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot * configuration */ + BFA_STATUS_SFP_NOT_READY = 159, /* SFP info is not ready. Retry */ BFA_STATUS_TRUNK_ENABLED = 164, /* Trunk is already enabled on * this adapter */ BFA_STATUS_TRUNK_DISABLED = 165, /* Trunking is disabled on * the adapter */ BFA_STATUS_IOPROFILE_OFF = 175, /* IO profile OFF */ + BFA_STATUS_PHY_NOT_PRESENT = 183, /* PHY module not present */ + BFA_STATUS_FEATURE_NOT_SUPPORTED = 192, /* Feature not supported */ + BFA_STATUS_FAA_ENABLED = 197, /* FAA is already enabled */ + BFA_STATUS_FAA_DISABLED = 198, /* FAA is already disabled */ + BFA_STATUS_FAA_ACQUIRED = 199, /* FAA is already acquired */ + BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */ + BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */ BFA_STATUS_MAX_VAL /* Unknown error code */ }; #define bfa_status_t enum bfa_status @@ -265,6 +294,8 @@ enum bfa_ioc_state { BFA_IOC_DISABLED = 10, /* IOC is disabled */ BFA_IOC_FWMISMATCH = 11, /* IOC f/w different from drivers */ BFA_IOC_ENABLING = 12, /* IOC is being enabled */ + BFA_IOC_HWFAIL = 13, /* PCI mapping doesn't exist */ + BFA_IOC_ACQ_ADDR = 14, /* Acquiring addr from fabric */ }; /* @@ -294,6 +325,7 @@ struct bfa_ioc_drv_stats_s { u32 enable_reqs; u32 disable_replies; u32 enable_replies; + u32 rsvd; }; /* @@ -320,7 +352,10 @@ struct bfa_ioc_attr_s { struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */ struct bfa_ioc_pci_attr_s pci_attr; u8 port_id; /* port number */ - u8 rsvd[7]; /* 64bit align */ + u8 port_mode; /* bfa_mode_s */ + u8 cap_bm; /* capability */ + u8 port_mode_cfg; /* bfa_mode_s */ + u8 rsvd[4]; /* 64bit align */ }; /* @@ -337,6 +372,21 @@ struct bfa_ioc_attr_s { #define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20 #define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20 #define BFA_MFG_SUPPLIER_REVISION_SIZE 4 +/* + * Initial capability definition + */ +#define BFA_MFG_IC_FC 0x01 +#define BFA_MFG_IC_ETH 0x02 + +/* + * Adapter capability mask definition + */ +#define BFA_CM_HBA 0x01 +#define BFA_CM_CNA 0x02 +#define BFA_CM_NIC 0x04 +#define BFA_CM_FC16G 0x08 +#define BFA_CM_SRIOV 0x10 +#define BFA_CM_MEZZ 0x20 #pragma pack(1) @@ -344,31 +394,39 @@ struct bfa_ioc_attr_s { * All numerical fields are in big-endian format. */ struct bfa_mfg_block_s { - u8 version; /* manufacturing block version */ - u8 mfg_sig[3]; /* characters 'M', 'F', 'G' */ - u16 mfgsize; /* mfg block size */ - u16 u16_chksum; /* old u16 checksum */ - char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)]; - char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)]; - u8 mfg_day; /* manufacturing day */ - u8 mfg_month; /* manufacturing month */ - u16 mfg_year; /* manufacturing year */ - wwn_t mfg_wwn; /* wwn base for this adapter */ - u8 num_wwn; /* number of wwns assigned */ - u8 mfg_speeds; /* speeds allowed for this adapter */ - u8 rsv[2]; - char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)]; - char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)]; - char - supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)]; - char - supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)]; - mac_t mfg_mac; /* mac address */ - u8 num_mac; /* number of mac addresses */ - u8 rsv2; - u32 mfg_type; /* card type */ - u8 rsv3[108]; - u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /* md5 checksum */ + u8 version; /*!< manufacturing block version */ + u8 mfg_sig[3]; /*!< characters 'M', 'F', 'G' */ + u16 mfgsize; /*!< mfg block size */ + u16 u16_chksum; /*!< old u16 checksum */ + char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)]; + char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)]; + u8 mfg_day; /*!< manufacturing day */ + u8 mfg_month; /*!< manufacturing month */ + u16 mfg_year; /*!< manufacturing year */ + wwn_t mfg_wwn; /*!< wwn base for this adapter */ + u8 num_wwn; /*!< number of wwns assigned */ + u8 mfg_speeds; /*!< speeds allowed for this adapter */ + u8 rsv[2]; + char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)]; + char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)]; + char supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)]; + char supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)]; + mac_t mfg_mac; /*!< base mac address */ + u8 num_mac; /*!< number of mac addresses */ + u8 rsv2; + u32 card_type; /*!< card type */ + char cap_nic; /*!< capability nic */ + char cap_cna; /*!< capability cna */ + char cap_hba; /*!< capability hba */ + char cap_fc16g; /*!< capability fc 16g */ + char cap_sriov; /*!< capability sriov */ + char cap_mezz; /*!< capability mezz */ + u8 rsv3; + u8 mfg_nports; /*!< number of ports */ + char media[8]; /*!< xfi/xaui */ + char initial_mode[8]; /*!< initial mode: hba/cna/nic */ + u8 rsv4[84]; + u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */ }; #pragma pack() @@ -386,17 +444,27 @@ enum { BFA_PCI_DEVICE_ID_FC_8G1P = 0x17, BFA_PCI_DEVICE_ID_CT = 0x14, BFA_PCI_DEVICE_ID_CT_FC = 0x21, + BFA_PCI_DEVICE_ID_CT2 = 0x22, }; -#define bfa_asic_id_ct(devid) \ - ((devid) == BFA_PCI_DEVICE_ID_CT || \ - (devid) == BFA_PCI_DEVICE_ID_CT_FC) +#define bfa_asic_id_cb(__d) \ + ((__d) == BFA_PCI_DEVICE_ID_FC_8G2P || \ + (__d) == BFA_PCI_DEVICE_ID_FC_8G1P) +#define bfa_asic_id_ct(__d) \ + ((__d) == BFA_PCI_DEVICE_ID_CT || \ + (__d) == BFA_PCI_DEVICE_ID_CT_FC) +#define bfa_asic_id_ct2(__d) ((__d) == BFA_PCI_DEVICE_ID_CT2) +#define bfa_asic_id_ctc(__d) \ + (bfa_asic_id_ct(__d) || bfa_asic_id_ct2(__d)) /* * PCI sub-system device and vendor ID information */ enum { BFA_PCI_FCOE_SSDEVICE_ID = 0x14, + BFA_PCI_CT2_SSID_FCoE = 0x22, + BFA_PCI_CT2_SSID_ETH = 0x23, + BFA_PCI_CT2_SSID_FC = 0x24, }; /* @@ -416,9 +484,7 @@ enum bfa_port_speed { BFA_PORT_SPEED_8GBPS = 8, BFA_PORT_SPEED_10GBPS = 10, BFA_PORT_SPEED_16GBPS = 16, - BFA_PORT_SPEED_AUTO = - (BFA_PORT_SPEED_1GBPS | BFA_PORT_SPEED_2GBPS | - BFA_PORT_SPEED_4GBPS | BFA_PORT_SPEED_8GBPS), + BFA_PORT_SPEED_AUTO = 0xf, }; #define bfa_port_speed_t enum bfa_port_speed @@ -463,4 +529,453 @@ struct bfa_boot_pbc_s { struct bfa_boot_bootlun_s pblun[BFA_PREBOOT_BOOTLUN_MAX]; }; +/* + * ASIC block configuration related structures + */ +#define BFA_ABLK_MAX_PORTS 2 +#define BFA_ABLK_MAX_PFS 16 +#define BFA_ABLK_MAX 2 + +#pragma pack(1) +enum bfa_mode_s { + BFA_MODE_HBA = 1, + BFA_MODE_CNA = 2, + BFA_MODE_NIC = 3 +}; + +struct bfa_adapter_cfg_mode_s { + u16 max_pf; + u16 max_vf; + enum bfa_mode_s mode; +}; + +struct bfa_ablk_cfg_pf_s { + u16 pers; + u8 port_id; + u8 optrom; + u8 valid; + u8 sriov; + u8 max_vfs; + u8 rsvd[1]; + u16 num_qpairs; + u16 num_vectors; + u32 bw; +}; + +struct bfa_ablk_cfg_port_s { + u8 mode; + u8 type; + u8 max_pfs; + u8 rsvd[5]; +}; + +struct bfa_ablk_cfg_inst_s { + u8 nports; + u8 max_pfs; + u8 rsvd[6]; + struct bfa_ablk_cfg_pf_s pf_cfg[BFA_ABLK_MAX_PFS]; + struct bfa_ablk_cfg_port_s port_cfg[BFA_ABLK_MAX_PORTS]; +}; + +struct bfa_ablk_cfg_s { + struct bfa_ablk_cfg_inst_s inst[BFA_ABLK_MAX]; +}; + + +/* + * SFP module specific + */ +#define SFP_DIAGMON_SIZE 10 /* num bytes of diag monitor data */ + +enum bfa_defs_sfp_media_e { + BFA_SFP_MEDIA_UNKNOWN = 0x00, + BFA_SFP_MEDIA_CU = 0x01, + BFA_SFP_MEDIA_LW = 0x02, + BFA_SFP_MEDIA_SW = 0x03, + BFA_SFP_MEDIA_EL = 0x04, + BFA_SFP_MEDIA_UNSUPPORT = 0x05, +}; + +/* + * values for xmtr_tech above + */ +enum { + SFP_XMTR_TECH_CU = (1 << 0), /* copper FC-BaseT */ + SFP_XMTR_TECH_CP = (1 << 1), /* copper passive */ + SFP_XMTR_TECH_CA = (1 << 2), /* copper active */ + SFP_XMTR_TECH_LL = (1 << 3), /* longwave laser */ + SFP_XMTR_TECH_SL = (1 << 4), /* shortwave laser w/ OFC */ + SFP_XMTR_TECH_SN = (1 << 5), /* shortwave laser w/o OFC */ + SFP_XMTR_TECH_EL_INTRA = (1 << 6), /* elec intra-enclosure */ + SFP_XMTR_TECH_EL_INTER = (1 << 7), /* elec inter-enclosure */ + SFP_XMTR_TECH_LC = (1 << 8), /* longwave laser */ + SFP_XMTR_TECH_SA = (1 << 9) +}; + +/* + * Serial ID: Data Fields -- Address A0h + * Basic ID field total 64 bytes + */ +struct sfp_srlid_base_s { + u8 id; /* 00: Identifier */ + u8 extid; /* 01: Extended Identifier */ + u8 connector; /* 02: Connector */ + u8 xcvr[8]; /* 03-10: Transceiver */ + u8 encoding; /* 11: Encoding */ + u8 br_norm; /* 12: BR, Nominal */ + u8 rate_id; /* 13: Rate Identifier */ + u8 len_km; /* 14: Length single mode km */ + u8 len_100m; /* 15: Length single mode 100m */ + u8 len_om2; /* 16: Length om2 fiber 10m */ + u8 len_om1; /* 17: Length om1 fiber 10m */ + u8 len_cu; /* 18: Length copper 1m */ + u8 len_om3; /* 19: Length om3 fiber 10m */ + u8 vendor_name[16];/* 20-35 */ + u8 unalloc1; + u8 vendor_oui[3]; /* 37-39 */ + u8 vendor_pn[16]; /* 40-55 */ + u8 vendor_rev[4]; /* 56-59 */ + u8 wavelen[2]; /* 60-61 */ + u8 unalloc2; + u8 cc_base; /* 63: check code for base id field */ +}; + +/* + * Serial ID: Data Fields -- Address A0h + * Extended id field total 32 bytes + */ +struct sfp_srlid_ext_s { + u8 options[2]; + u8 br_max; + u8 br_min; + u8 vendor_sn[16]; + u8 date_code[8]; + u8 diag_mon_type; /* 92: Diagnostic Monitoring type */ + u8 en_options; + u8 sff_8472; + u8 cc_ext; +}; + +/* + * Diagnostic: Data Fields -- Address A2h + * Diagnostic and control/status base field total 96 bytes + */ +struct sfp_diag_base_s { + /* + * Alarm and warning Thresholds 40 bytes + */ + u8 temp_high_alarm[2]; /* 00-01 */ + u8 temp_low_alarm[2]; /* 02-03 */ + u8 temp_high_warning[2]; /* 04-05 */ + u8 temp_low_warning[2]; /* 06-07 */ + + u8 volt_high_alarm[2]; /* 08-09 */ + u8 volt_low_alarm[2]; /* 10-11 */ + u8 volt_high_warning[2]; /* 12-13 */ + u8 volt_low_warning[2]; /* 14-15 */ + + u8 bias_high_alarm[2]; /* 16-17 */ + u8 bias_low_alarm[2]; /* 18-19 */ + u8 bias_high_warning[2]; /* 20-21 */ + u8 bias_low_warning[2]; /* 22-23 */ + + u8 tx_pwr_high_alarm[2]; /* 24-25 */ + u8 tx_pwr_low_alarm[2]; /* 26-27 */ + u8 tx_pwr_high_warning[2]; /* 28-29 */ + u8 tx_pwr_low_warning[2]; /* 30-31 */ + + u8 rx_pwr_high_alarm[2]; /* 32-33 */ + u8 rx_pwr_low_alarm[2]; /* 34-35 */ + u8 rx_pwr_high_warning[2]; /* 36-37 */ + u8 rx_pwr_low_warning[2]; /* 38-39 */ + + u8 unallocate_1[16]; + + /* + * ext_cal_const[36] + */ + u8 rx_pwr[20]; + u8 tx_i[4]; + u8 tx_pwr[4]; + u8 temp[4]; + u8 volt[4]; + u8 unallocate_2[3]; + u8 cc_dmi; +}; + +/* + * Diagnostic: Data Fields -- Address A2h + * Diagnostic and control/status extended field total 24 bytes + */ +struct sfp_diag_ext_s { + u8 diag[SFP_DIAGMON_SIZE]; + u8 unalloc1[4]; + u8 status_ctl; + u8 rsvd; + u8 alarm_flags[2]; + u8 unalloc2[2]; + u8 warning_flags[2]; + u8 ext_status_ctl[2]; +}; + +struct sfp_mem_s { + struct sfp_srlid_base_s srlid_base; + struct sfp_srlid_ext_s srlid_ext; + struct sfp_diag_base_s diag_base; + struct sfp_diag_ext_s diag_ext; +}; + +/* + * transceiver codes (SFF-8472 Rev 10.2 Table 3.5) + */ +union sfp_xcvr_e10g_code_u { + u8 b; + struct { +#ifdef __BIGENDIAN + u8 e10g_unall:1; /* 10G Ethernet compliance */ + u8 e10g_lrm:1; + u8 e10g_lr:1; + u8 e10g_sr:1; + u8 ib_sx:1; /* Infiniband compliance */ + u8 ib_lx:1; + u8 ib_cu_a:1; + u8 ib_cu_p:1; +#else + u8 ib_cu_p:1; + u8 ib_cu_a:1; + u8 ib_lx:1; + u8 ib_sx:1; /* Infiniband compliance */ + u8 e10g_sr:1; + u8 e10g_lr:1; + u8 e10g_lrm:1; + u8 e10g_unall:1; /* 10G Ethernet compliance */ +#endif + } r; +}; + +union sfp_xcvr_so1_code_u { + u8 b; + struct { + u8 escon:2; /* ESCON compliance code */ + u8 oc192_reach:1; /* SONET compliance code */ + u8 so_reach:2; + u8 oc48_reach:3; + } r; +}; + +union sfp_xcvr_so2_code_u { + u8 b; + struct { + u8 reserved:1; + u8 oc12_reach:3; /* OC12 reach */ + u8 reserved1:1; + u8 oc3_reach:3; /* OC3 reach */ + } r; +}; + +union sfp_xcvr_eth_code_u { + u8 b; + struct { + u8 base_px:1; + u8 base_bx10:1; + u8 e100base_fx:1; + u8 e100base_lx:1; + u8 e1000base_t:1; + u8 e1000base_cx:1; + u8 e1000base_lx:1; + u8 e1000base_sx:1; + } r; +}; + +struct sfp_xcvr_fc1_code_s { + u8 link_len:5; /* FC link length */ + u8 xmtr_tech2:3; + u8 xmtr_tech1:7; /* FC transmitter technology */ + u8 reserved1:1; +}; + +union sfp_xcvr_fc2_code_u { + u8 b; + struct { + u8 tw_media:1; /* twin axial pair (tw) */ + u8 tp_media:1; /* shielded twisted pair (sp) */ + u8 mi_media:1; /* miniature coax (mi) */ + u8 tv_media:1; /* video coax (tv) */ + u8 m6_media:1; /* multimode, 62.5m (m6) */ + u8 m5_media:1; /* multimode, 50m (m5) */ + u8 reserved:1; + u8 sm_media:1; /* single mode (sm) */ + } r; +}; + +union sfp_xcvr_fc3_code_u { + u8 b; + struct { +#ifdef __BIGENDIAN + u8 rsv4:1; + u8 mb800:1; /* 800 Mbytes/sec */ + u8 mb1600:1; /* 1600 Mbytes/sec */ + u8 mb400:1; /* 400 Mbytes/sec */ + u8 rsv2:1; + u8 mb200:1; /* 200 Mbytes/sec */ + u8 rsv1:1; + u8 mb100:1; /* 100 Mbytes/sec */ +#else + u8 mb100:1; /* 100 Mbytes/sec */ + u8 rsv1:1; + u8 mb200:1; /* 200 Mbytes/sec */ + u8 rsv2:1; + u8 mb400:1; /* 400 Mbytes/sec */ + u8 mb1600:1; /* 1600 Mbytes/sec */ + u8 mb800:1; /* 800 Mbytes/sec */ + u8 rsv4:1; +#endif + } r; +}; + +struct sfp_xcvr_s { + union sfp_xcvr_e10g_code_u e10g; + union sfp_xcvr_so1_code_u so1; + union sfp_xcvr_so2_code_u so2; + union sfp_xcvr_eth_code_u eth; + struct sfp_xcvr_fc1_code_s fc1; + union sfp_xcvr_fc2_code_u fc2; + union sfp_xcvr_fc3_code_u fc3; +}; + +/* + * Flash module specific + */ +#define BFA_FLASH_PART_ENTRY_SIZE 32 /* partition entry size */ +#define BFA_FLASH_PART_MAX 32 /* maximal # of partitions */ + +enum bfa_flash_part_type { + BFA_FLASH_PART_OPTROM = 1, /* option rom partition */ + BFA_FLASH_PART_FWIMG = 2, /* firmware image partition */ + BFA_FLASH_PART_FWCFG = 3, /* firmware tuneable config */ + BFA_FLASH_PART_DRV = 4, /* IOC driver config */ + BFA_FLASH_PART_BOOT = 5, /* boot config */ + BFA_FLASH_PART_ASIC = 6, /* asic bootstrap configuration */ + BFA_FLASH_PART_MFG = 7, /* manufacturing block partition */ + BFA_FLASH_PART_OPTROM2 = 8, /* 2nd option rom partition */ + BFA_FLASH_PART_VPD = 9, /* vpd data of OEM info */ + BFA_FLASH_PART_PBC = 10, /* pre-boot config */ + BFA_FLASH_PART_BOOTOVL = 11, /* boot overlay partition */ + BFA_FLASH_PART_LOG = 12, /* firmware log partition */ + BFA_FLASH_PART_PXECFG = 13, /* pxe boot config partition */ + BFA_FLASH_PART_PXEOVL = 14, /* pxe boot overlay partition */ + BFA_FLASH_PART_PORTCFG = 15, /* port cfg partition */ + BFA_FLASH_PART_ASICBK = 16, /* asic backup partition */ +}; + +/* + * flash partition attributes + */ +struct bfa_flash_part_attr_s { + u32 part_type; /* partition type */ + u32 part_instance; /* partition instance */ + u32 part_off; /* partition offset */ + u32 part_size; /* partition size */ + u32 part_len; /* partition content length */ + u32 part_status; /* partition status */ + char rsv[BFA_FLASH_PART_ENTRY_SIZE - 24]; +}; + +/* + * flash attributes + */ +struct bfa_flash_attr_s { + u32 status; /* flash overall status */ + u32 npart; /* num of partitions */ + struct bfa_flash_part_attr_s part[BFA_FLASH_PART_MAX]; +}; + +/* + * DIAG module specific + */ +#define LB_PATTERN_DEFAULT 0xB5B5B5B5 +#define QTEST_CNT_DEFAULT 10 +#define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT + +struct bfa_diag_memtest_s { + u8 algo; + u8 rsvd[7]; +}; + +struct bfa_diag_memtest_result { + u32 status; + u32 addr; + u32 exp; /* expect value read from reg */ + u32 act; /* actually value read */ + u32 err_status; /* error status reg */ + u32 err_status1; /* extra error info reg */ + u32 err_addr; /* error address reg */ + u8 algo; + u8 rsv[3]; +}; + +struct bfa_diag_loopback_result_s { + u32 numtxmfrm; /* no. of transmit frame */ + u32 numosffrm; /* no. of outstanding frame */ + u32 numrcvfrm; /* no. of received good frame */ + u32 badfrminf; /* mis-match info */ + u32 badfrmnum; /* mis-match fram number */ + u8 status; /* loopback test result */ + u8 rsvd[3]; +}; + +struct bfa_diag_ledtest_s { + u32 cmd; /* bfa_led_op_t */ + u32 color; /* bfa_led_color_t */ + u16 freq; /* no. of blinks every 10 secs */ + u8 led; /* bitmap of LEDs to be tested */ + u8 rsvd[5]; +}; + +struct bfa_diag_loopback_s { + u32 loopcnt; + u32 pattern; + u8 lb_mode; /* bfa_port_opmode_t */ + u8 speed; /* bfa_port_speed_t */ + u8 rsvd[2]; +}; + +/* + * PHY module specific + */ +enum bfa_phy_status_e { + BFA_PHY_STATUS_GOOD = 0, /* phy is good */ + BFA_PHY_STATUS_NOT_PRESENT = 1, /* phy does not exist */ + BFA_PHY_STATUS_BAD = 2, /* phy is bad */ +}; + +/* + * phy attributes for phy query + */ +struct bfa_phy_attr_s { + u32 status; /* phy present/absent status */ + u32 length; /* firmware length */ + u32 fw_ver; /* firmware version */ + u32 an_status; /* AN status */ + u32 pma_pmd_status; /* PMA/PMD link status */ + u32 pma_pmd_signal; /* PMA/PMD signal detect */ + u32 pcs_status; /* PCS link status */ +}; + +/* + * phy stats + */ +struct bfa_phy_stats_s { + u32 status; /* phy stats status */ + u32 link_breaks; /* Num of link breaks after linkup */ + u32 pma_pmd_fault; /* NPMA/PMD fault */ + u32 pcs_fault; /* PCS fault */ + u32 speed_neg; /* Num of speed negotiation */ + u32 tx_eq_training; /* Num of TX EQ training */ + u32 tx_eq_timeout; /* Num of TX EQ timeout */ + u32 crc_error; /* Num of CRC errors */ +}; + +#pragma pack() + #endif /* __BFA_DEFS_H__ */ |