diff options
Diffstat (limited to 'drivers/scsi/NCR5380.h')
| -rw-r--r-- | drivers/scsi/NCR5380.h | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h new file mode 100644 index 00000000000..b5103f94d62 --- /dev/null +++ b/drivers/scsi/NCR5380.h @@ -0,0 +1,432 @@ +/* + * NCR 5380 defines + * + * Copyright 1993, Drew Eckhardt + * Visionary Computing + * (Unix consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 + * + * DISTRIBUTION RELEASE 7 + * + * For more information, please consult + * + * NCR 5380 Family + * SCSI Protocol Controller + * Databook + * NCR Microelectronics + * 1635 Aeroplaza Drive + * Colorado Springs, CO 80916 + * 1+ (719) 578-3400 + * 1+ (800) 334-5454 + */ + +/* + * $Log: NCR5380.h,v $ + */ + +#ifndef NCR5380_H +#define NCR5380_H + +#include <linux/interrupt.h> + +#define NCR5380_PUBLIC_RELEASE 7 +#define NCR53C400_PUBLIC_RELEASE 2 + +#define NDEBUG_ARBITRATION 0x1 +#define NDEBUG_AUTOSENSE 0x2 +#define NDEBUG_DMA 0x4 +#define NDEBUG_HANDSHAKE 0x8 +#define NDEBUG_INFORMATION 0x10 +#define NDEBUG_INIT 0x20 +#define NDEBUG_INTR 0x40 +#define NDEBUG_LINKED 0x80 +#define NDEBUG_MAIN 0x100 +#define NDEBUG_NO_DATAOUT 0x200 +#define NDEBUG_NO_WRITE 0x400 +#define NDEBUG_PIO 0x800 +#define NDEBUG_PSEUDO_DMA 0x1000 +#define NDEBUG_QUEUES 0x2000 +#define NDEBUG_RESELECTION 0x4000 +#define NDEBUG_SELECTION 0x8000 +#define NDEBUG_USLEEP 0x10000 +#define NDEBUG_LAST_BYTE_SENT 0x20000 +#define NDEBUG_RESTART_SELECT 0x40000 +#define NDEBUG_EXTENDED 0x80000 +#define NDEBUG_C400_PREAD 0x100000 +#define NDEBUG_C400_PWRITE 0x200000 +#define NDEBUG_LISTS 0x400000 + +#define NDEBUG_ANY 0xFFFFFFFFUL + +/* + * The contents of the OUTPUT DATA register are asserted on the bus when + * either arbitration is occurring or the phase-indicating signals ( + * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA + * bit in the INITIATOR COMMAND register is set. + */ + +#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */ +#define CURRENT_SCSI_DATA_REG 0 /* ro same */ + +#define INITIATOR_COMMAND_REG 1 /* rw */ +#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */ +#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */ +#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */ +#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */ +#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */ +#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */ +#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */ +#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */ +#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */ +#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */ + +#ifdef DIFFERENTIAL +#define ICR_BASE ICR_DIFF_ENABLE +#else +#define ICR_BASE 0 +#endif + +#define MODE_REG 2 +/* + * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the + * transfer, causing the chip to hog the bus. You probably don't want + * this. + */ +#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */ +#define MR_TARGET 0x40 /* rw target mode */ +#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */ +#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */ +#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */ +#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */ +#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */ +#define MR_ARBITRATE 0x01 /* rw start arbitration */ + +#ifdef PARITY +#define MR_BASE MR_ENABLE_PAR_CHECK +#else +#define MR_BASE 0 +#endif + +#define TARGET_COMMAND_REG 3 +#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */ +#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */ +#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */ +#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */ +#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */ + +#define STATUS_REG 4 /* ro */ +/* + * Note : a set bit indicates an active signal, driven by us or another + * device. + */ +#define SR_RST 0x80 +#define SR_BSY 0x40 +#define SR_REQ 0x20 +#define SR_MSG 0x10 +#define SR_CD 0x08 +#define SR_IO 0x04 +#define SR_SEL 0x02 +#define SR_DBP 0x01 + +/* + * Setting a bit in this register will cause an interrupt to be generated when + * BSY is false and SEL true and this bit is asserted on the bus. + */ +#define SELECT_ENABLE_REG 4 /* wo */ + +#define BUS_AND_STATUS_REG 5 /* ro */ +#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */ +#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */ +#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */ +#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */ +#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */ +#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */ +#define BASR_ATN 0x02 /* ro BUS status */ +#define BASR_ACK 0x01 /* ro BUS status */ + +/* Write any value to this register to start a DMA send */ +#define START_DMA_SEND_REG 5 /* wo */ + +/* + * Used in DMA transfer mode, data is latched from the SCSI bus on + * the falling edge of REQ (ini) or ACK (tgt) + */ +#define INPUT_DATA_REG 6 /* ro */ + +/* Write any value to this register to start a DMA receive */ +#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */ + +/* Read this register to clear interrupt conditions */ +#define RESET_PARITY_INTERRUPT_REG 7 /* ro */ + +/* Write any value to this register to start an ini mode DMA receive */ +#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */ + +#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */ + +#define CSR_RESET 0x80 /* wo Resets 53c400 */ +#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */ +#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ +#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */ +#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */ +#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */ +#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */ +#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */ +#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */ + +#if 0 +#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR +#else +#define CSR_BASE CSR_53C80_INTR +#endif + +/* Number of 128-byte blocks to be transferred */ +#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */ + +/* Resume transfer after disconnect */ +#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */ + +/* Access to host buffer stack */ +#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */ + + +/* Note : PHASE_* macros are based on the values of the STATUS register */ +#define PHASE_MASK (SR_MSG | SR_CD | SR_IO) + +#define PHASE_DATAOUT 0 +#define PHASE_DATAIN SR_IO +#define PHASE_CMDOUT SR_CD +#define PHASE_STATIN (SR_CD | SR_IO) +#define PHASE_MSGOUT (SR_MSG | SR_CD) +#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO) +#define PHASE_UNKNOWN 0xff + +/* + * Convert status register phase to something we can use to set phase in + * the target register so we can get phase mismatch interrupts on DMA + * transfers. + */ + +#define PHASE_SR_TO_TCR(phase) ((phase) >> 2) + +/* + * The internal should_disconnect() function returns these based on the + * expected length of a disconnect if a device supports disconnect/ + * reconnect. + */ + +#define DISCONNECT_NONE 0 +#define DISCONNECT_TIME_TO_DATA 1 +#define DISCONNECT_LONG 2 + +/* + * These are "special" values for the tag parameter passed to NCR5380_select. + */ + +#define TAG_NEXT -1 /* Use next free tag */ +#define TAG_NONE -2 /* + * Establish I_T_L nexus instead of I_T_L_Q + * even on SCSI-II devices. + */ + +/* + * These are "special" values for the irq and dma_channel fields of the + * Scsi_Host structure + */ + +#define SCSI_IRQ_NONE 255 +#define DMA_NONE 255 +#define IRQ_AUTO 254 +#define DMA_AUTO 254 +#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */ + +#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */ +#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */ +#define FLAG_NCR53C400 4 /* NCR53c400 */ +#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */ +#define FLAG_DTC3181E 16 /* DTC3181E */ + +#ifndef ASM +struct NCR5380_hostdata { + NCR5380_implementation_fields; /* implementation specific */ + struct Scsi_Host *host; /* Host backpointer */ + unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */ + unsigned char targets_present; /* targets we have connected + to, so we can call a select + failure a retryable condition */ + volatile unsigned char busy[8]; /* index = target, bit = lun */ +#if defined(REAL_DMA) || defined(REAL_DMA_POLL) + volatile int dma_len; /* requested length of DMA */ +#endif + volatile unsigned char last_message; /* last message OUT */ + volatile Scsi_Cmnd *connected; /* currently connected command */ + volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */ + volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */ + volatile int restart_select; /* we have disconnected, + used to restart + NCR5380_select() */ + volatile unsigned aborted:1; /* flag, says aborted */ + int flags; + unsigned long time_expires; /* in jiffies, set prior to sleeping */ + int select_time; /* timer in select for target response */ + volatile Scsi_Cmnd *selecting; + struct work_struct coroutine; /* our co-routine */ +#ifdef NCR5380_STATS + unsigned timebase; /* Base for time calcs */ + long time_read[8]; /* time to do reads */ + long time_write[8]; /* time to do writes */ + unsigned long bytes_read[8]; /* bytes read */ + unsigned long bytes_write[8]; /* bytes written */ + unsigned pendingr; + unsigned pendingw; +#endif +}; + +#ifdef __KERNEL__ + +#define dprintk(a,b) do {} while(0) +#define NCR5380_dprint(a,b) do {} while(0) +#define NCR5380_dprint_phase(a,b) do {} while(0) + +#if defined(AUTOPROBE_IRQ) +static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible); +#endif +static int NCR5380_init(struct Scsi_Host *instance, int flags); +static void NCR5380_exit(struct Scsi_Host *instance); +static void NCR5380_information_transfer(struct Scsi_Host *instance); +#ifndef DONT_USE_INTR +static irqreturn_t NCR5380_intr(int irq, void *dev_id, struct pt_regs *regs); +#endif +static void NCR5380_main(void *ptr); +static void NCR5380_print_options(struct Scsi_Host *instance); +#ifdef NDEBUG +static void NCR5380_print_phase(struct Scsi_Host *instance); +static void NCR5380_print(struct Scsi_Host *instance); +#endif +static int NCR5380_abort(Scsi_Cmnd * cmd); +static int NCR5380_bus_reset(Scsi_Cmnd * cmd); +static int NCR5380_host_reset(Scsi_Cmnd * cmd); +static int NCR5380_device_reset(Scsi_Cmnd * cmd); +static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)); +static int NCR5380_proc_info(struct Scsi_Host *instance, char *buffer, char **start, +off_t offset, int length, int inout); + +static void NCR5380_reselect(struct Scsi_Host *instance); +static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag); +#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL) +static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); +#endif +static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); + +#if (defined(REAL_DMA) || defined(REAL_DMA_POLL)) + +#if defined(i386) || defined(__alpha__) + +/** + * NCR5380_pc_dma_setup - setup ISA DMA + * @instance: adapter to set up + * @ptr: block to transfer (virtual address) + * @count: number of bytes to transfer + * @mode: DMA controller mode to use + * + * Program the DMA controller ready to perform an ISA DMA transfer + * on this chip. + * + * Locks: takes and releases the ISA DMA lock. + */ + +static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode) +{ + unsigned limit; + unsigned long bus_addr = virt_to_bus(ptr); + unsigned long flags; + + if (instance->dma_channel <= 3) { + if (count > 65536) + count = 65536; + limit = 65536 - (bus_addr & 0xFFFF); + } else { + if (count > 65536 * 2) + count = 65536 * 2; + limit = 65536 * 2 - (bus_addr & 0x1FFFF); + } + + if (count > limit) + count = limit; + + if ((count & 1) || (bus_addr & 1)) + panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no); + + flags=claim_dma_lock(); + disable_dma(instance->dma_channel); + clear_dma_ff(instance->dma_channel); + set_dma_addr(instance->dma_channel, bus_addr); + set_dma_count(instance->dma_channel, count); + set_dma_mode(instance->dma_channel, mode); + enable_dma(instance->dma_channel); + release_dma_lock(flags); + + return count; +} + +/** + * NCR5380_pc_dma_write_setup - setup ISA DMA write + * @instance: adapter to set up + * @ptr: block to transfer (virtual address) + * @count: number of bytes to transfer + * + * Program the DMA controller ready to perform an ISA DMA write to the + * SCSI controller. + * + * Locks: called routines take and release the ISA DMA lock. + */ + +static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count) +{ + return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE); +} + +/** + * NCR5380_pc_dma_read_setup - setup ISA DMA read + * @instance: adapter to set up + * @ptr: block to transfer (virtual address) + * @count: number of bytes to transfer + * + * Program the DMA controller ready to perform an ISA DMA read from the + * SCSI controller. + * + * Locks: called routines take and release the ISA DMA lock. + */ + +static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count) +{ + return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ); +} + +/** + * NCR5380_pc_dma_residual - return bytes left + * @instance: adapter + * + * Reports the number of bytes left over after the DMA was terminated. + * + * Locks: takes and releases the ISA DMA lock. + */ + +static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance) +{ + unsigned long flags; + int tmp; + + flags = claim_dma_lock(); + clear_dma_ff(instance->dma_channel); + tmp = get_dma_residue(instance->dma_channel); + release_dma_lock(flags); + + return tmp; +} +#endif /* defined(i386) || defined(__alpha__) */ +#endif /* defined(REAL_DMA) */ +#endif /* __KERNEL__ */ +#endif /* ndef ASM */ +#endif /* NCR5380_H */ |