aboutsummaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-ab8500.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/rtc-ab8500.c')
-rw-r--r--drivers/rtc/rtc-ab8500.c138
1 files changed, 121 insertions, 17 deletions
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
index e346705aae9..4bcf9ca2818 100644
--- a/drivers/rtc/rtc-ab8500.c
+++ b/drivers/rtc/rtc-ab8500.c
@@ -15,7 +15,7 @@
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
@@ -90,7 +90,7 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
/* Early AB8500 chips will not clear the rtc read request bit */
if (abx500_get_chip_id(dev) == 0) {
- msleep(1);
+ usleep_range(1000, 1000);
} else {
/* Wait for some cycles after enabling the rtc read in ab8500 */
while (time_before(jiffies, timeout)) {
@@ -102,7 +102,7 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
if (!(value & RTC_READ_REQUEST))
break;
- msleep(1);
+ usleep_range(1000, 5000);
}
}
@@ -258,6 +258,109 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
return ab8500_rtc_irq_enable(dev, alarm->enabled);
}
+
+static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
+{
+ int retval;
+ u8 rtccal = 0;
+
+ /*
+ * Check that the calibration value (which is in units of 0.5
+ * parts-per-million) is in the AB8500's range for RtcCalibration
+ * register. -128 (0x80) is not permitted because the AB8500 uses
+ * a sign-bit rather than two's complement, so 0x80 is just another
+ * representation of zero.
+ */
+ if ((calibration < -127) || (calibration > 127)) {
+ dev_err(dev, "RtcCalibration value outside permitted range\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
+ * so need to convert to this sort of representation before writing
+ * into RtcCalibration register...
+ */
+ if (calibration >= 0)
+ rtccal = 0x7F & calibration;
+ else
+ rtccal = ~(calibration - 1) | 0x80;
+
+ retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+ AB8500_RTC_CALIB_REG, rtccal);
+
+ return retval;
+}
+
+static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
+{
+ int retval;
+ u8 rtccal = 0;
+
+ retval = abx500_get_register_interruptible(dev, AB8500_RTC,
+ AB8500_RTC_CALIB_REG, &rtccal);
+ if (retval >= 0) {
+ /*
+ * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
+ * so need to convert value from RtcCalibration register into
+ * a two's complement signed value...
+ */
+ if (rtccal & 0x80)
+ *calibration = 0 - (rtccal & 0x7F);
+ else
+ *calibration = 0x7F & rtccal;
+ }
+
+ return retval;
+}
+
+static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int retval;
+ int calibration = 0;
+
+ if (sscanf(buf, " %i ", &calibration) != 1) {
+ dev_err(dev, "Failed to store RTC calibration attribute\n");
+ return -EINVAL;
+ }
+
+ retval = ab8500_rtc_set_calibration(dev, calibration);
+
+ return retval ? retval : count;
+}
+
+static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int retval = 0;
+ int calibration = 0;
+
+ retval = ab8500_rtc_get_calibration(dev, &calibration);
+ if (retval < 0) {
+ dev_err(dev, "Failed to read RTC calibration attribute\n");
+ sprintf(buf, "0\n");
+ return retval;
+ }
+
+ return sprintf(buf, "%d\n", calibration);
+}
+
+static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
+ ab8500_sysfs_show_rtc_calibration,
+ ab8500_sysfs_store_rtc_calibration);
+
+static int ab8500_sysfs_rtc_register(struct device *dev)
+{
+ return device_create_file(dev, &dev_attr_rtc_calibration);
+}
+
+static void ab8500_sysfs_rtc_unregister(struct device *dev)
+{
+ device_remove_file(dev, &dev_attr_rtc_calibration);
+}
+
static irqreturn_t rtc_alarm_handler(int irq, void *data)
{
struct rtc_device *rtc = data;
@@ -295,7 +398,7 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
return err;
/* Wait for reset by the PorRtc */
- msleep(1);
+ usleep_range(1000, 5000);
err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
AB8500_RTC_STAT_REG, &rtc_ctrl);
@@ -308,6 +411,8 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
return -ENODEV;
}
+ device_init_wakeup(&pdev->dev, true);
+
rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc)) {
@@ -316,8 +421,8 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
return err;
}
- err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0,
- "ab8500-rtc", rtc);
+ err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
+ IRQF_NO_SUSPEND, "ab8500-rtc", rtc);
if (err < 0) {
rtc_device_unregister(rtc);
return err;
@@ -325,6 +430,13 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, rtc);
+
+ err = ab8500_sysfs_rtc_register(&pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "sysfs RTC failed to register\n");
+ return err;
+ }
+
return 0;
}
@@ -333,6 +445,8 @@ static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
struct rtc_device *rtc = platform_get_drvdata(pdev);
int irq = platform_get_irq_byname(pdev, "ALARM");
+ ab8500_sysfs_rtc_unregister(&pdev->dev);
+
free_irq(irq, rtc);
rtc_device_unregister(rtc);
platform_set_drvdata(pdev, NULL);
@@ -349,18 +463,8 @@ static struct platform_driver ab8500_rtc_driver = {
.remove = __devexit_p(ab8500_rtc_remove),
};
-static int __init ab8500_rtc_init(void)
-{
- return platform_driver_register(&ab8500_rtc_driver);
-}
-
-static void __exit ab8500_rtc_exit(void)
-{
- platform_driver_unregister(&ab8500_rtc_driver);
-}
+module_platform_driver(ab8500_rtc_driver);
-module_init(ab8500_rtc_init);
-module_exit(ab8500_rtc_exit);
MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
MODULE_DESCRIPTION("AB8500 RTC Driver");
MODULE_LICENSE("GPL v2");