diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/anatop-regulator.c | 241 |
3 files changed, 250 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c733df5d866..a229de98ae6 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -102,6 +102,14 @@ config REGULATOR_DA9052 This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. +config REGULATOR_ANATOP + tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on MFD_ANATOP + help + Say y here to support Freescale i.MX on-chip ANATOP LDOs + regulators. It is recommended that this option be + enabled on i.MX6 platform. + config REGULATOR_MC13XXX_CORE tristate diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index cf0934b598e..ab06474e5eb 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o +obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c new file mode 100644 index 00000000000..17499a55113 --- /dev/null +++ b/drivers/regulator/anatop-regulator.c @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/mfd/anatop.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +struct anatop_regulator { + const char *name; + u32 control_reg; + struct anatop *mfd; + int vol_bit_shift; + int vol_bit_width; + int min_bit_val; + int min_voltage; + int max_voltage; + struct regulator_desc rdesc; + struct regulator_init_data *initdata; +}; + +static int anatop_set_voltage(struct regulator_dev *reg, int min_uV, + int max_uV, unsigned *selector) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + u32 val, sel; + int uv; + + uv = min_uV; + dev_dbg(®->dev, "%s: uv %d, min %d, max %d\n", __func__, + uv, anatop_reg->min_voltage, + anatop_reg->max_voltage); + + if (uv < anatop_reg->min_voltage) { + if (max_uV > anatop_reg->min_voltage) + uv = anatop_reg->min_voltage; + else + return -EINVAL; + } + + if (!anatop_reg->control_reg) + return -ENOTSUPP; + + sel = DIV_ROUND_UP(uv - anatop_reg->min_voltage, 25000); + if (sel * 25000 + anatop_reg->min_voltage > anatop_reg->max_voltage) + return -EINVAL; + val = anatop_reg->min_bit_val + sel; + *selector = sel; + dev_dbg(®->dev, "%s: calculated val %d\n", __func__, val); + anatop_set_bits(anatop_reg->mfd, + anatop_reg->control_reg, + anatop_reg->vol_bit_shift, + anatop_reg->vol_bit_width, + val); + + return 0; +} + +static int anatop_get_voltage_sel(struct regulator_dev *reg) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + u32 val; + + if (!anatop_reg->control_reg) + return -ENOTSUPP; + + val = anatop_get_bits(anatop_reg->mfd, + anatop_reg->control_reg, + anatop_reg->vol_bit_shift, + anatop_reg->vol_bit_width); + + return val - anatop_reg->min_bit_val; +} + +static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int uv; + + uv = anatop_reg->min_voltage + selector * 25000; + dev_dbg(®->dev, "vddio = %d, selector = %u\n", uv, selector); + + return uv; +} + +static struct regulator_ops anatop_rops = { + .set_voltage = anatop_set_voltage, + .get_voltage_sel = anatop_get_voltage_sel, + .list_voltage = anatop_list_voltage, +}; + +static int __devinit anatop_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct regulator_desc *rdesc; + struct regulator_dev *rdev; + struct anatop_regulator *sreg; + struct regulator_init_data *initdata; + struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent); + int ret = 0; + + initdata = of_get_regulator_init_data(dev, np); + sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL); + if (!sreg) + return -ENOMEM; + sreg->initdata = initdata; + sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL), + GFP_KERNEL); + rdesc = &sreg->rdesc; + memset(rdesc, 0, sizeof(*rdesc)); + rdesc->name = sreg->name; + rdesc->ops = &anatop_rops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->owner = THIS_MODULE; + sreg->mfd = anatopmfd; + ret = of_property_read_u32(np, "reg", &sreg->control_reg); + if (ret) { + dev_err(dev, "no reg property set\n"); + goto anatop_probe_end; + } + ret = of_property_read_u32(np, "anatop-vol-bit-width", + &sreg->vol_bit_width); + if (ret) { + dev_err(dev, "no anatop-vol-bit-width property set\n"); + goto anatop_probe_end; + } + ret = of_property_read_u32(np, "anatop-vol-bit-shift", + &sreg->vol_bit_shift); + if (ret) { + dev_err(dev, "no anatop-vol-bit-shift property set\n"); + goto anatop_probe_end; + } + ret = of_property_read_u32(np, "anatop-min-bit-val", + &sreg->min_bit_val); + if (ret) { + dev_err(dev, "no anatop-min-bit-val property set\n"); + goto anatop_probe_end; + } + ret = of_property_read_u32(np, "anatop-min-voltage", + &sreg->min_voltage); + if (ret) { + dev_err(dev, "no anatop-min-voltage property set\n"); + goto anatop_probe_end; + } + ret = of_property_read_u32(np, "anatop-max-voltage", + &sreg->max_voltage); + if (ret) { + dev_err(dev, "no anatop-max-voltage property set\n"); + goto anatop_probe_end; + } + + rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) + / 25000 + 1; + + /* register regulator */ + rdev = regulator_register(rdesc, dev, + initdata, sreg, pdev->dev.of_node); + if (IS_ERR(rdev)) { + dev_err(dev, "failed to register %s\n", + rdesc->name); + ret = PTR_ERR(rdev); + goto anatop_probe_end; + } + + platform_set_drvdata(pdev, rdev); + +anatop_probe_end: + if (ret) + kfree(sreg->name); + + return ret; +} + +static int __devexit anatop_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct anatop_regulator *sreg = rdev_get_drvdata(rdev); + const char *name = sreg->name; + + regulator_unregister(rdev); + kfree(name); + + return 0; +} + +static struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = { + { .compatible = "fsl,anatop-regulator", }, + { /* end */ } +}; + +static struct platform_driver anatop_regulator = { + .driver = { + .name = "anatop_regulator", + .owner = THIS_MODULE, + .of_match_table = of_anatop_regulator_match_tbl, + }, + .probe = anatop_regulator_probe, + .remove = anatop_regulator_remove, +}; + +static int __init anatop_regulator_init(void) +{ + return platform_driver_register(&anatop_regulator); +} +postcore_initcall(anatop_regulator_init); + +static void __exit anatop_regulator_exit(void) +{ + platform_driver_unregister(&anatop_regulator); +} +module_exit(anatop_regulator_exit); + +MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>, " + "Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); +MODULE_DESCRIPTION("ANATOP Regulator driver"); +MODULE_LICENSE("GPL v2"); |