diff options
Diffstat (limited to 'drivers/regulator/core.c')
-rw-r--r-- | drivers/regulator/core.c | 153 |
1 files changed, 147 insertions, 6 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 48385318175..2e0352dc26b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -77,6 +77,7 @@ struct regulator { struct device *dev; struct list_head list; unsigned int always_on:1; + unsigned int bypass:1; int uA_load; int min_uV; int max_uV; @@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev, case REGULATOR_STATUS_STANDBY: label = "standby"; break; + case REGULATOR_STATUS_BYPASS: + label = "bypass"; + break; case REGULATOR_STATUS_UNDEFINED: label = "undefined"; break; @@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, static DEVICE_ATTR(suspend_standby_state, 0444, regulator_suspend_standby_state_show, NULL); +static ssize_t regulator_bypass_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *report; + bool bypass; + int ret; + + ret = rdev->desc->ops->get_bypass(rdev, &bypass); + + if (ret != 0) + report = "unknown"; + else if (bypass) + report = "enabled"; + else + report = "disabled"; + + return sprintf(buf, "%s\n", report); +} +static DEVICE_ATTR(bypass, 0444, + regulator_bypass_show, NULL); /* * These are the only attributes are present for all regulators. @@ -778,6 +803,9 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); + if (!count) + sprintf(buf, "no parameters"); + rdev_info(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && @@ -974,6 +1002,7 @@ static int set_supply(struct regulator_dev *rdev, err = -ENOMEM; return err; } + supply_rdev->open_count++; return 0; } @@ -1720,6 +1749,9 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) if (regulator->always_on) return 0; + if (!ms) + return regulator_disable(regulator); + mutex_lock(&rdev->mutex); rdev->deferred_disables++; mutex_unlock(&rdev->mutex); @@ -2178,9 +2210,12 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, } } - if (ret == 0 && best_val >= 0) + if (ret == 0 && best_val >= 0) { + unsigned long data = best_val; + _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, - (void *)best_val); + (void *)data); + } trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); @@ -2291,8 +2326,8 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** - *regulator_set_voltage_time_sel - get raise/fall time - * @regulator: regulator source + * regulator_set_voltage_time_sel - get raise/fall time + * @rdev: regulator source device * @old_selector: selector for starting voltage * @new_selector: selector for target voltage * @@ -2388,6 +2423,8 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) ret = rdev->desc->ops->list_voltage(rdev, sel); } else if (rdev->desc->ops->get_voltage) { ret = rdev->desc->ops->get_voltage(rdev); + } else if (rdev->desc->ops->list_voltage) { + ret = rdev->desc->ops->list_voltage(rdev, 0); } else { return -EINVAL; } @@ -2674,6 +2711,100 @@ out: EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); /** + * regulator_set_bypass_regmap - Default set_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: state to set. + */ +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->bypass_mask; + else + val = 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, + rdev->desc->bypass_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); + +/** + * regulator_get_bypass_regmap - Default get_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: current state. + */ +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); + if (ret != 0) + return ret; + + *enable = val & rdev->desc->bypass_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_allow_bypass - allow the regulator to go into bypass mode + * + * @regulator: Regulator to configure + * @allow: enable or disable bypass mode + * + * Allow the regulator to go into bypass mode if all other consumers + * for the regulator also enable bypass mode and the machine + * constraints allow this. Bypass mode means that the regulator is + * simply passing the input directly to the output with no regulation. + */ +int regulator_allow_bypass(struct regulator *regulator, bool enable) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret = 0; + + if (!rdev->desc->ops->set_bypass) + return 0; + + if (rdev->constraints && + !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) + return 0; + + mutex_lock(&rdev->mutex); + + if (enable && !regulator->bypass) { + rdev->bypass_count++; + + if (rdev->bypass_count == rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count--; + } + + } else if (!enable && regulator->bypass) { + rdev->bypass_count--; + + if (rdev->bypass_count != rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count++; + } + } + + if (ret == 0) + regulator->bypass = enable; + + mutex_unlock(&rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_allow_bypass); + +/** * regulator_register_notifier - register regulator event notifier * @regulator: regulator source * @nb: notifier block @@ -3011,7 +3142,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev) /* some attributes need specific methods to be displayed */ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) { + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) { status = device_create_file(dev, &dev_attr_microvolts); if (status < 0) return status; @@ -3036,6 +3168,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } + if (ops->get_bypass) { + status = device_create_file(dev, &dev_attr_bypass); + if (status < 0) + return status; + } /* some attributes are type-specific */ if (rdev->desc->type == REGULATOR_CURRENT) { @@ -3124,6 +3261,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) &rdev->use_count); debugfs_create_u32("open_count", 0444, rdev->debugfs, &rdev->open_count); + debugfs_create_u32("bypass_count", 0444, rdev->debugfs, + &rdev->bypass_count); } /** @@ -3189,8 +3328,10 @@ regulator_register(const struct regulator_desc *regulator_desc, rdev->desc = regulator_desc; if (config->regmap) rdev->regmap = config->regmap; - else + else if (dev_get_regmap(dev, NULL)) rdev->regmap = dev_get_regmap(dev, NULL); + else if (dev->parent) + rdev->regmap = dev_get_regmap(dev->parent, NULL); INIT_LIST_HEAD(&rdev->consumer_list); INIT_LIST_HEAD(&rdev->list); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); |