diff options
Diffstat (limited to 'drivers/rapidio/switches/tsi57x.c')
| -rw-r--r-- | drivers/rapidio/switches/tsi57x.c | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index 5ad7880787c..23040b92ea7 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -25,6 +25,14 @@ #define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n) #define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n) +#define TSI578_SP_MODE(n) (0x11004 + n*0x100) +#define TSI578_SP_MODE_PW_DIS 0x08000000 + +#define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100) +#define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100) +#define TSI578_SP_CS_TX(n) (0x13014 + n*0x100) +#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100) + static int tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port) @@ -104,3 +112,148 @@ DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_route_add_entry, ts DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table); DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table); DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table); + +static int +tsi57x_em_init(struct rio_dev *rdev) +{ + struct rio_mport *mport = rdev->net->hport; + u16 destid = rdev->rswitch->destid; + u8 hopcount = rdev->rswitch->hopcount; + u32 regval; + int portnum; + + pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount); + + for (portnum = 0; portnum < 16; portnum++) { + /* Make sure that Port-Writes are enabled (for all ports) */ + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_MODE(portnum), ®val); + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_SP_MODE(portnum), + regval & ~TSI578_SP_MODE_PW_DIS); + + /* Clear all pending interrupts */ + rio_mport_read_config_32(mport, destid, hopcount, + rdev->phys_efptr + + RIO_PORT_N_ERR_STS_CSR(portnum), + ®val); + rio_mport_write_config_32(mport, destid, hopcount, + rdev->phys_efptr + + RIO_PORT_N_ERR_STS_CSR(portnum), + regval & 0x07120214); + + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_INT_STATUS(portnum), ®val); + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_SP_INT_STATUS(portnum), + regval & 0x000700bd); + + /* Enable all interrupts to allow ports to send a port-write */ + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_CTL_INDEP(portnum), ®val); + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_SP_CTL_INDEP(portnum), + regval | 0x000b0000); + + /* Skip next (odd) port if the current port is in x4 mode */ + rio_mport_read_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + ®val); + if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) + portnum++; + } + + return 0; +} + +static int +tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) +{ + struct rio_mport *mport = rdev->net->hport; + u16 destid = rdev->rswitch->destid; + u8 hopcount = rdev->rswitch->hopcount; + u32 intstat, err_status; + int sendcount, checkcount; + u8 route_port; + u32 regval; + + rio_mport_read_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), + &err_status); + + if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && + (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | + RIO_PORT_N_ERR_STS_PW_INP_ES))) { + /* Remove any queued packets by locking/unlocking port */ + rio_mport_read_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + ®val); + if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { + rio_mport_write_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + regval | RIO_PORT_N_CTL_LOCKOUT); + udelay(50); + rio_mport_write_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + regval); + } + + /* Read from link maintenance response register to clear + * valid bit + */ + rio_mport_read_config_32(mport, destid, hopcount, + rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), + ®val); + + /* Send a Packet-Not-Accepted/Link-Request-Input-Status control + * symbol to recover from IES/OES + */ + sendcount = 3; + while (sendcount) { + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_SP_CS_TX(portnum), 0x40fc8000); + checkcount = 3; + while (checkcount--) { + udelay(50); + rio_mport_read_config_32( + mport, destid, hopcount, + rdev->phys_efptr + + RIO_PORT_N_MNT_RSP_CSR(portnum), + ®val); + if (regval & RIO_PORT_N_MNT_RSP_RVAL) + goto exit_es; + } + + sendcount--; + } + } + +exit_es: + /* Clear implementation specific error status bits */ + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_INT_STATUS(portnum), &intstat); + pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n", + destid, hopcount, portnum, intstat); + + if (intstat & 0x10000) { + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_LUT_PEINF(portnum), ®val); + regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24); + route_port = rdev->rswitch->route_table[regval]; + pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n", + rio_name(rdev), portnum, regval); + tsi57x_route_add_entry(mport, destid, hopcount, + RIO_GLOBAL_TABLE, regval, route_port); + } + + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_SP_INT_STATUS(portnum), + intstat & 0x000700bd); + + return 0; +} + +DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_em_init, tsi57x_em_handler); +DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_em_init, tsi57x_em_handler); +DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_em_init, tsi57x_em_handler); +DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_em_init, tsi57x_em_handler); |