diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/olpc_battery.c | 273 | ||||
| -rw-r--r-- | drivers/power/power_supply_sysfs.c | 1 | ||||
| -rw-r--r-- | drivers/power/tosa_battery.c | 486 |
5 files changed, 692 insertions, 76 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 4d17d384578..9ce55850271 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -49,6 +49,13 @@ config BATTERY_OLPC help Say Y to enable support for the battery on the OLPC laptop. +config BATTERY_TOSA + tristate "Sharp SL-6000 (tosa) battery" + depends on MACH_TOSA && MFD_TC6393XB + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + config BATTERY_PALMTX tristate "Palm T|X battery" depends on MACH_PALMTX diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6f43a54ee42..4706bf8ff45 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o +obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index ab1e8289f07..32570af3c5c 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 +#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -84,6 +84,119 @@ static struct power_supply olpc_ac = { .get_property = olpc_ac_get_prop, }; +static char bat_serial[17]; /* Ick */ + +static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) +{ + if (olpc_platform_info.ecver > 0x44) { + if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ec_byte & BAT_STAT_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* er,... */ + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + /* Older EC didn't report charge/discharge bits */ + if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* Not _necessarily_ true but EC doesn't tell all yet */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } + + return 0; +} + +static int olpc_bat_get_health(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte) { + case 0: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + + case BAT_ERR_OVERTEMP: + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + + case BAT_ERR_OVERVOLTAGE: + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + break; + + case BAT_ERR_INFOFAIL: + case BAT_ERR_OUT_OF_CONTROL: + case BAT_ERR_ID_FAIL: + case BAT_ERR_ACR_FAIL: + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + + default: + /* Eep. We don't know this failure code */ + ret = -EIO; + } + + return ret; +} + +static int olpc_bat_get_mfr(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte >> 4) { + case 1: + val->strval = "Gold Peak"; + break; + case 2: + val->strval = "BYD"; + break; + default: + val->strval = "Unknown"; + break; + } + + return ret; +} + +static int olpc_bat_get_tech(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte & 0xf) { + case 1: + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + break; + case 2: + val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; + break; + default: + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + break; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy, int ret = 0; int16_t ec_word; uint8_t ec_byte; + uint64_t ser_buf; ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1); if (ret) @@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (ec_byte & BAT_STAT_DISCHARGING) - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* er,... */ - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - } else { - /* Older EC didn't report charge/discharge bits */ - if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* Not _necessarily_ true but EC doesn't tell all yet */ - val->intval = POWER_SUPPLY_STATUS_CHARGING; - break; - } + ret = olpc_bat_get_status(val, ec_byte); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & BAT_STAT_PRESENT); break; @@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ec_byte & BAT_STAT_DESTROY) val->intval = POWER_SUPPLY_HEALTH_DEAD; else { - ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + ret = olpc_bat_get_health(val); if (ret) return ret; - - switch (ec_byte) { - case 0: - val->intval = POWER_SUPPLY_HEALTH_GOOD; - break; - - case BAT_ERR_OVERTEMP: - val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; - break; - - case BAT_ERR_OVERVOLTAGE: - val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - break; - - case BAT_ERR_INFOFAIL: - case BAT_ERR_OUT_OF_CONTROL: - case BAT_ERR_ID_FAIL: - case BAT_ERR_ACR_FAIL: - val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; - break; - - default: - /* Eep. We don't know this failure code */ - return -EIO; - } } break; case POWER_SUPPLY_PROP_MANUFACTURER: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_mfr(val); if (ret) return ret; - - switch (ec_byte >> 4) { - case 1: - val->strval = "Gold Peak"; - break; - case 2: - val->strval = "BYD"; - break; - default: - val->strval = "Unknown"; - break; - } break; case POWER_SUPPLY_PROP_TECHNOLOGY: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_tech(val); if (ret) return ret; - - switch (ec_byte & 0xf) { - case 1: - val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; - break; - case 2: - val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; - break; - default: - val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; - break; - } break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2); @@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2); + if (ret) + return ret; + + ec_word = be16_to_cpu(ec_word); + val->intval = ec_word * 6250 / 15; + break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); + if (ret) + return ret; + + sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); + val->strval = bat_serial; + break; default: ret = -EINVAL; break; @@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_CHARGE_COUNTER, +}; + +/* EEPROM reading goes completely around the power_supply API, sadly */ + +#define EEPROM_START 0x20 +#define EEPROM_END 0x80 +#define EEPROM_SIZE (EEPROM_END - EEPROM_START) + +static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + uint8_t ec_byte; + int ret, end; + + if (off >= EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + end = EEPROM_START + off + count; + for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, + &buf[ec_byte - EEPROM_START], 1); + if (ret) { + printk(KERN_ERR "olpc-battery: EC command " + "EC_BAT_EEPROM @ 0x%x failed -" + " %d!\n", ec_byte, ret); + return -EIO; + } + } + + return count; +} + +static struct bin_attribute olpc_bat_eeprom = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = 0, + .read = olpc_bat_eeprom_read, }; /********************************************************************* @@ -290,8 +398,14 @@ static int __init olpc_bat_init(void) if (!olpc_platform_info.ecver) return -ENXIO; - if (olpc_platform_info.ecver < 0x43) { - printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver); + + /* + * We've seen a number of EC protocol changes; this driver requires + * the latest EC protocol, supported by 0x44 and above. + */ + if (olpc_platform_info.ecver < 0x44) { + printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " + "battery driver.\n", olpc_platform_info.ecver); return -ENXIO; } @@ -315,8 +429,14 @@ static int __init olpc_bat_init(void) if (ret) goto battery_failed; + ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom); + if (ret) + goto eeprom_failed; + goto success; +eeprom_failed: + power_supply_unregister(&olpc_bat); battery_failed: power_supply_unregister(&olpc_ac); ac_failed: @@ -327,6 +447,7 @@ success: static void __exit olpc_bat_exit(void) { + device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); platform_device_unregister(bat_pdev); diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 49215da5249..fe2aeb11939 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_empty), POWER_SUPPLY_ATTR(charge_now), POWER_SUPPLY_ATTR(charge_avg), + POWER_SUPPLY_ATTR(charge_counter), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c new file mode 100644 index 00000000000..bf664fbd661 --- /dev/null +++ b/drivers/power/tosa_battery.c @@ -0,0 +1,486 @@ +/* + * Battery and Power Management code for the Sharp SL-6000x + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/wm97xx.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/arch/tosa.h> + +static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ +static struct work_struct bat_work; + +struct tosa_bat { + int status; + struct power_supply psy; + int full_chrg; + + struct mutex work_lock; /* protects data */ + + bool (*is_present)(struct tosa_bat *bat); + int gpio_full; + int gpio_charge_off; + + int technology; + + int gpio_bat; + int adc_bat; + int adc_bat_divider; + int bat_max; + int bat_min; + + int gpio_temp; + int adc_temp; + int adc_temp_divider; +}; + +static struct tosa_bat tosa_bat_main; +static struct tosa_bat tosa_bat_jacket; + +static unsigned long tosa_read_bat(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_bat < 0 || bat->adc_bat < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_bat, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_bat); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); + + value = value * 1000000 / bat->adc_bat_divider; + + return value; +} + +static unsigned long tosa_read_temp(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_temp < 0 || bat->adc_temp < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_temp, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_temp); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); + + value = value * 10000 / bat->adc_temp_divider; + + return value; +} + +static int tosa_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); + + if (bat->is_present && !bat->is_present(bat) + && psp != POWER_SUPPLY_PROP_PRESENT) { + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = tosa_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) + val->intval = bat->bat_max; + else + val->intval = bat->full_chrg; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = tosa_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) +{ + return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0; +} + +static void tosa_bat_external_power_changed(struct power_supply *psy) +{ + schedule_work(&bat_work); +} + +static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) +{ + pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; +} + +static void tosa_bat_update(struct tosa_bat *bat) +{ + int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + + old = bat->status; + + if (bat->is_present && !bat->is_present(bat)) { + printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_UNKNOWN; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { + if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { + gpio_set_value(bat->gpio_charge_off, 0); + mdelay(15); + } + + if (gpio_get_value(bat->gpio_full)) { + if (old == POWER_SUPPLY_STATUS_CHARGING || + bat->full_chrg == -1) + bat->full_chrg = tosa_read_bat(bat); + + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + gpio_set_value(bat->gpio_charge_off, 0); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (old != bat->status) + power_supply_changed(psy); + + mutex_unlock(&bat->work_lock); +} + +static void tosa_bat_work(struct work_struct *work) +{ + tosa_bat_update(&tosa_bat_main); + tosa_bat_update(&tosa_bat_jacket); +} + + +static enum power_supply_property tosa_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_PRESENT, +}; + +static enum power_supply_property tosa_bat_bu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct tosa_bat tosa_bat_main = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + .use_for_apm = 1, + }, + + .gpio_full = TOSA_GPIO_BAT0_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT0_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT1_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_jacket = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "jacket-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .is_present = tosa_jacket_bat_is_present, + .gpio_full = TOSA_GPIO_BAT1_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT1_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT0_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_bu = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, + + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_bu_props, + .num_properties = ARRAY_SIZE(tosa_bat_bu_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_off = -1, + + .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, + + .gpio_bat = TOSA_GPIO_BU_CHRG_ON, + .adc_bat = WM97XX_AUX_ID4, + .adc_bat_divider = 1266, + + .gpio_temp = -1, + .adc_temp = -1, + .adc_temp_divider = -1, +}; + +static struct { + int gpio; + char *name; + bool output; + int value; +} gpios[] = { + { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 }, + { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 }, + { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 }, + { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 }, + { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 }, + { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 }, + { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 }, + { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 }, + { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 }, + { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, + { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, + { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, + { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 }, +}; + +#ifdef CONFIG_PM +static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) +{ + /* flush all pending status updates */ + flush_scheduled_work(); + return 0; +} + +static int tosa_bat_resume(struct platform_device *dev) +{ + /* things may have changed while we were away */ + schedule_work(&bat_work); + return 0; +} +#else +#define tosa_bat_suspend NULL +#define tosa_bat_resume NULL +#endif + +static int __devinit tosa_bat_probe(struct platform_device *dev) +{ + int ret; + int i; + + if (!machine_is_tosa()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) { + i--; + goto err_gpio; + } + + if (gpios[i].output) + ret = gpio_direction_output(gpios[i].gpio, + gpios[i].value); + else + ret = gpio_direction_input(gpios[i].gpio); + + if (ret) + goto err_gpio; + } + + mutex_init(&tosa_bat_main.work_lock); + mutex_init(&tosa_bat_jacket.work_lock); + + INIT_WORK(&bat_work, tosa_bat_work); + + ret = power_supply_register(&dev->dev, &tosa_bat_main.psy); + if (ret) + goto err_psy_reg_main; + ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy); + if (ret) + goto err_psy_reg_jacket; + ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &tosa_bat_main); + if (ret) + goto err_req_main; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket full", &tosa_bat_jacket); + if (ret) + goto err_req_jacket; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket detect", &tosa_bat_jacket); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); +err_req_jacket: + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); +err_req_main: + power_supply_unregister(&tosa_bat_bu.psy); +err_psy_reg_bu: + power_supply_unregister(&tosa_bat_jacket.psy); +err_psy_reg_jacket: + power_supply_unregister(&tosa_bat_main.psy); +err_psy_reg_main: + + /* see comment in tosa_bat_remove */ + flush_scheduled_work(); + + i--; +err_gpio: + for (; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return ret; +} + +static int __devexit tosa_bat_remove(struct platform_device *dev) +{ + int i; + + free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + + power_supply_unregister(&tosa_bat_bu.psy); + power_supply_unregister(&tosa_bat_jacket.psy); + power_supply_unregister(&tosa_bat_main.psy); + + /* + * now flush all pending work. + * we won't get any more schedules, since all + * sources (isr and external_power_changed) + * are unregistered now. + */ + flush_scheduled_work(); + + for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return 0; +} + +static struct platform_driver tosa_bat_driver = { + .driver.name = "wm97xx-battery", + .driver.owner = THIS_MODULE, + .probe = tosa_bat_probe, + .remove = __devexit_p(tosa_bat_remove), + .suspend = tosa_bat_suspend, + .resume = tosa_bat_resume, +}; + +static int __init tosa_bat_init(void) +{ + return platform_driver_register(&tosa_bat_driver); +} + +static void __exit tosa_bat_exit(void) +{ + platform_driver_unregister(&tosa_bat_driver); +} + +module_init(tosa_bat_init); +module_exit(tosa_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_DESCRIPTION("Tosa battery driver"); +MODULE_ALIAS("platform:wm97xx-battery"); |