diff options
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/pinctrl-coh901.c | 35 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-u300.c | 7 |
2 files changed, 26 insertions, 16 deletions
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index d6b41747d68..eeff7f7fc92 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -22,7 +22,6 @@ #include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/pinctrl-coh901.h> #include "pinctrl-coh901.h" #define U300_GPIO_PORT_STRIDE (0x30) @@ -58,8 +57,9 @@ #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) /* 8 bits per port, no version has more than 7 ports */ +#define U300_GPIO_NUM_PORTS 7 #define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7) +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS) struct u300_gpio { struct gpio_chip chip; @@ -111,9 +111,6 @@ struct u300_gpio_confdata { int outval; }; -/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ -#define BS335_GPIO_NUM_PORTS 7 - #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ .output = false, \ @@ -136,7 +133,7 @@ struct u300_gpio_confdata { /* Initial configuration */ static const struct __initconst u300_gpio_confdata -bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +bs335_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { U300_FLOATING_INPUT, @@ -630,13 +627,12 @@ static void __init u300_gpio_init_pin(struct u300_gpio *gpio, } } -static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, - struct u300_gpio_platform *plat) +static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio) { int i, j; /* Write default config and values to all pins */ - for (i = 0; i < plat->ports; i++) { + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { for (j = 0; j < 8; j++) { const struct u300_gpio_confdata *conf; int offset = (i*8) + j; @@ -693,7 +689,6 @@ static struct coh901_pinpair coh901_pintable[] = { static int __init u300_gpio_probe(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio; struct resource *memres; int err = 0; @@ -707,9 +702,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return -ENOMEM; gpio->chip = u300_gpio_chip; - gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT; + gpio->chip.ngpio = U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT; gpio->chip.dev = &pdev->dev; - gpio->chip.base = plat->gpio_base; + gpio->chip.base = 0; gpio->dev = &pdev->dev; memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -750,11 +745,11 @@ static int __init u300_gpio_probe(struct platform_device *pdev) ((val & 0x0000FE00) >> 9) * 8); writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, gpio->base + U300_GPIO_CR); - u300_gpio_init_coh901571(gpio, plat); + u300_gpio_init_coh901571(gpio); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); - for (portno = 0 ; portno < plat->ports; portno++) { + for (portno = 0 ; portno < U300_GPIO_NUM_PORTS; portno++) { struct u300_gpio_port *port = kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL); @@ -768,8 +763,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev) port->number = portno; port->gpio = gpio; - port->irq = platform_get_irq_byname(pdev, - port->name); + port->irq = platform_get_irq(pdev, portno); dev_dbg(gpio->dev, "register IRQ %d for port %s\n", port->irq, port->name); @@ -806,6 +800,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) } dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno); +#ifdef CONFIG_OF_GPIO + gpio->chip.of_node = pdev->dev.of_node; +#endif err = gpiochip_add(&gpio->chip); if (err) { dev_err(gpio->dev, "unable to add gpiochip: %d\n", err); @@ -860,9 +857,15 @@ static int __exit u300_gpio_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_gpio_match[] = { + { .compatible = "stericsson,gpio-coh901" }, + {}, +}; + static struct platform_driver u300_gpio_driver = { .driver = { .name = "u300-gpio", + .of_match_table = u300_gpio_match, }, .remove = __exit_p(u300_gpio_remove), }; diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index 6a3a7503e6a..06bfa09bb15 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1105,10 +1105,17 @@ static int u300_pmx_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_pinctrl_match[] = { + { .compatible = "stericsson,pinctrl-u300" }, + {}, +}; + + static struct platform_driver u300_pmx_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = u300_pinctrl_match, }, .probe = u300_pmx_probe, .remove = u300_pmx_remove, |