diff options
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/o2micro.h | 34 |
1 files changed, 27 insertions, 7 deletions
diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h index b1f6e3d9ee0..a234ce1967a 100644 --- a/drivers/pcmcia/o2micro.h +++ b/drivers/pcmcia/o2micro.h @@ -120,11 +120,16 @@ #define O2_MODE_E_LED_OUT 0x08 #define O2_MODE_E_SKTA_ACTV 0x10 +#define O2_RESERVED1 0x94 +#define O2_RESERVED2 0xD4 +#define O2_RES_READ_PREFETCH 0x02 +#define O2_RES_WRITE_BURST 0x08 + static int o2micro_override(struct yenta_socket *socket) { /* - * 'reserved' register at 0x94/D4. chaning it to 0xCA (8 bit) enables - * read prefetching which for example makes the RME Hammerfall DSP + * 'reserved' register at 0x94/D4. allows setting read prefetch and write + * bursting. read prefetching for example makes the RME Hammerfall DSP * working. for some bridges it is at 0x94, for others at 0xD4. it's * ok to write to both registers on all O2 bridges. * from Eric Still, 02Micro. @@ -132,20 +137,35 @@ static int o2micro_override(struct yenta_socket *socket) u8 a, b; if (PCI_FUNC(socket->dev->devfn) == 0) { - a = config_readb(socket, 0x94); - b = config_readb(socket, 0xD4); + a = config_readb(socket, O2_RESERVED1); + b = config_readb(socket, O2_RESERVED2); printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b); switch (socket->dev->device) { + /* + * older bridges have problems with both read prefetch and write + * bursting depending on the combination of the chipset, bridge + * and the cardbus card. so disable them to be on the safe side. + */ + case PCI_DEVICE_ID_O2_6729: + case PCI_DEVICE_ID_O2_6730: + case PCI_DEVICE_ID_O2_6812: case PCI_DEVICE_ID_O2_6832: - printk(KERN_INFO "Yenta O2: old bridge, not enabling read prefetch / write burst\n"); + case PCI_DEVICE_ID_O2_6836: + printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n"); + config_writeb(socket, O2_RESERVED1, + a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); + config_writeb(socket, O2_RESERVED2, + b & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); break; default: printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n"); - config_writeb(socket, 0x94, a | 0x0a); - config_writeb(socket, 0xD4, b | 0x0a); + config_writeb(socket, O2_RESERVED1, + a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); + config_writeb(socket, O2_RESERVED2, + b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); } } |