1 files changed, 249 insertions, 162 deletions

diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 9ba4dade69a..0bdda5b3ed5 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -6,7 +6,7 @@
  * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  *
  * Copyright (C) 1999	     David A. Hinds
- * Copyright (C) 2004-2005   Dominik Brodowski
+ * Copyright (C) 2004-2010   Dominik Brodowski
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -26,7 +26,6 @@
 #include <asm/irq.h>
 
 #include <pcmcia/ss.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -56,6 +55,12 @@ struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align,
 }
 
 
+/**
+ * release_io_space() - release IO ports allocated with alloc_io_space()
+ * @s: pcmcia socket
+ * @res: resource to release
+ *
+ */
 static void release_io_space(struct pcmcia_socket *s, struct resource *res)
 {
 	resource_size_t num = resource_size(res);
@@ -81,9 +86,14 @@ static void release_io_space(struct pcmcia_socket *s, struct resource *res)
 			}
 		}
 	}
-} /* release_io_space */
+}
+
 
-/** alloc_io_space
+/**
+ * alloc_io_space() - allocate IO ports for use by a PCMCIA device
+ * @s: pcmcia socket
+ * @res: resource to allocate (begin: begin, end: size)
+ * @lines: number of IO lines decoded by the PCMCIA card
  *
  * Special stuff for managing IO windows, because they are scarce
  */
@@ -135,7 +145,7 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res,
 	}
 	dev_dbg(&s->dev, "alloc_io_space request result %d: %pR\n", ret, res);
 	return ret;
-} /* alloc_io_space */
+}
 
 
 /**
@@ -168,14 +178,14 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev,
 		return -EACCES;
 	}
 
-	addr = (c->ConfigBase + where) >> 1;
+	addr = (p_dev->config_base + where) >> 1;
 
 	ret = accessf(s, 1, addr, 1, val);
 
 	mutex_unlock(&s->ops_mutex);
 
 	return ret;
-} /* pcmcia_access_config */
+}
 
 
 /**
@@ -204,11 +214,20 @@ int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val)
 EXPORT_SYMBOL(pcmcia_write_config_byte);
 
 
-int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
+/**
+ * pcmcia_map_mem_page() - modify iomem window to point to a different offset
+ * @p_dev: pcmcia device
+ * @res: iomem resource already enabled by pcmcia_request_window()
+ * @offset: card_offset to map
+ *
+ * pcmcia_map_mem_page() modifies what can be read and written by accessing
+ * an iomem range previously enabled by pcmcia_request_window(), by setting
+ * the card_offset value to @offset.
+ */
+int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res,
 			unsigned int offset)
 {
 	struct pcmcia_socket *s = p_dev->socket;
-	struct resource *res = wh;
 	unsigned int w;
 	int ret;
 
@@ -223,98 +242,111 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
 		dev_warn(&p_dev->dev, "failed to set_mem_map\n");
 	mutex_unlock(&s->ops_mutex);
 	return ret;
-} /* pcmcia_map_mem_page */
+}
 EXPORT_SYMBOL(pcmcia_map_mem_page);
 
 
-/** pcmcia_modify_configuration
+/**
+ * pcmcia_fixup_iowidth() - reduce io width to 8bit
+ * @p_dev: pcmcia device
  *
- * Modify a locked socket configuration
+ * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the
+ * IO width to 8bit after having called pcmcia_enable_device()
+ * previously.
  */
-int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
-				modconf_t *mod)
+int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev)
 {
-	struct pcmcia_socket *s;
-	config_t *c;
-	int ret;
-
-	s = p_dev->socket;
+	struct pcmcia_socket *s = p_dev->socket;
+	pccard_io_map io_off = { 0, 0, 0, 0, 1 };
+	pccard_io_map io_on;
+	int i, ret = 0;
 
 	mutex_lock(&s->ops_mutex);
-	c = p_dev->function_config;
 
-	if (!(s->state & SOCKET_PRESENT)) {
-		dev_dbg(&p_dev->dev, "No card present\n");
-		ret = -ENODEV;
-		goto unlock;
-	}
-	if (!(c->state & CONFIG_LOCKED)) {
-		dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
+	dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n");
+
+	if (!(s->state & SOCKET_PRESENT) ||
+		!(p_dev->function_config->state & CONFIG_LOCKED)) {
+		dev_dbg(&p_dev->dev, "No card? Config not locked?\n");
 		ret = -EACCES;
 		goto unlock;
 	}
 
-	if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
-		dev_dbg(&p_dev->dev,
-			"changing Vcc or IRQ is not allowed at this time\n");
-		ret = -EINVAL;
-		goto unlock;
-	}
+	io_on.speed = io_speed;
+	for (i = 0; i < MAX_IO_WIN; i++) {
+		if (!s->io[i].res)
+			continue;
+		io_off.map = i;
+		io_on.map = i;
 
-	/* We only allow changing Vpp1 and Vpp2 to the same value */
-	if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
-	    (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
-		if (mod->Vpp1 != mod->Vpp2) {
-			dev_dbg(&p_dev->dev,
-				"Vpp1 and Vpp2 must be the same\n");
-			ret = -EINVAL;
-			goto unlock;
-		}
-		s->socket.Vpp = mod->Vpp1;
-		if (s->ops->set_socket(s, &s->socket)) {
-			dev_printk(KERN_WARNING, &p_dev->dev,
-				   "Unable to set VPP\n");
-			ret = -EIO;
-			goto unlock;
-		}
-	} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
-		   (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
-		dev_dbg(&p_dev->dev,
-			"changing Vcc is not allowed at this time\n");
-		ret = -EINVAL;
-		goto unlock;
+		io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
+		io_on.start = s->io[i].res->start;
+		io_on.stop = s->io[i].res->end;
+
+		s->ops->set_io_map(s, &io_off);
+		mdelay(40);
+		s->ops->set_io_map(s, &io_on);
 	}
+unlock:
+	mutex_unlock(&s->ops_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pcmcia_fixup_iowidth);
+
+
+/**
+ * pcmcia_fixup_vpp() - set Vpp to a new voltage level
+ * @p_dev: pcmcia device
+ * @new_vpp: new Vpp voltage
+ *
+ * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to
+ * a new voltage level between calls to pcmcia_enable_device()
+ * and pcmcia_disable_device().
+ */
+int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp)
+{
+	struct pcmcia_socket *s = p_dev->socket;
+	int ret = 0;
 
-	if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
-		pccard_io_map io_off = { 0, 0, 0, 0, 1 };
-		pccard_io_map io_on;
-		int i;
+	mutex_lock(&s->ops_mutex);
 
-		io_on.speed = io_speed;
-		for (i = 0; i < MAX_IO_WIN; i++) {
-			if (!s->io[i].res)
-				continue;
-			io_off.map = i;
-			io_on.map = i;
+	dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp);
 
-			io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
-			io_on.start = s->io[i].res->start;
-			io_on.stop = s->io[i].res->end;
+	if (!(s->state & SOCKET_PRESENT) ||
+		!(p_dev->function_config->state & CONFIG_LOCKED)) {
+		dev_dbg(&p_dev->dev, "No card? Config not locked?\n");
+		ret = -EACCES;
+		goto unlock;
+	}
 
-			s->ops->set_io_map(s, &io_off);
-			mdelay(40);
-			s->ops->set_io_map(s, &io_on);
-		}
+	s->socket.Vpp = new_vpp;
+	if (s->ops->set_socket(s, &s->socket)) {
+		dev_warn(&p_dev->dev, "Unable to set VPP\n");
+		ret = -EIO;
+		goto unlock;
 	}
-	ret = 0;
+	p_dev->vpp = new_vpp;
+
 unlock:
 	mutex_unlock(&s->ops_mutex);
 
 	return ret;
-} /* modify_configuration */
-EXPORT_SYMBOL(pcmcia_modify_configuration);
+}
+EXPORT_SYMBOL(pcmcia_fixup_vpp);
 
 
+/**
+ * pcmcia_release_configuration() - physically disable a PCMCIA device
+ * @p_dev: pcmcia device
+ *
+ * pcmcia_release_configuration() is the 1:1 counterpart to
+ * pcmcia_enable_device(): If a PCMCIA device is no longer used by any
+ * driver, the Vpp voltage is set to 0, IRQs will no longer be generated,
+ * and I/O ranges will be disabled. As pcmcia_release_io() and
+ * pcmcia_release_window() still need to be called, device drivers are
+ * expected to call pcmcia_disable_device() instead.
+ */
 int pcmcia_release_configuration(struct pcmcia_device *p_dev)
 {
 	pccard_io_map io = { 0, 0, 0, 0, 1 };
@@ -327,7 +359,7 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev)
 	if (p_dev->_locked) {
 		p_dev->_locked = 0;
 		if (--(s->lock_count) == 0) {
-			s->socket.flags = SS_OUTPUT_ENA;   /* Is this correct? */
+			s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */
 			s->socket.Vpp = 0;
 			s->socket.io_irq = 0;
 			s->ops->set_socket(s, &s->socket);
@@ -349,16 +381,18 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev)
 	mutex_unlock(&s->ops_mutex);
 
 	return 0;
-} /* pcmcia_release_configuration */
+}
 
 
-/** pcmcia_release_io
+/**
+ * pcmcia_release_io() - release I/O allocated by a PCMCIA device
+ * @p_dev: pcmcia device
  *
- * Release_io() releases the I/O ranges allocated by a client.  This
- * may be invoked some time after a card ejection has already dumped
- * the actual socket configuration, so if the client is "stale", we
- * don't bother checking the port ranges against the current socket
- * values.
+ * pcmcia_release_io() releases the I/O ranges allocated by a PCMCIA
+ * device.  This may be invoked some time after a card ejection has
+ * already dumped the actual socket configuration, so if the client is
+ * "stale", we don't bother checking the port ranges against the
+ * current socket values.
  */
 static int pcmcia_release_io(struct pcmcia_device *p_dev)
 {
@@ -387,6 +421,14 @@ out:
 } /* pcmcia_release_io */
 
 
+/**
+ * pcmcia_release_window() - release reserved iomem for PCMCIA devices
+ * @p_dev: pcmcia device
+ * @res: iomem resource to release
+ *
+ * pcmcia_release_window() releases &struct resource *res which was
+ * previously reserved by calling pcmcia_request_window().
+ */
 int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
 {
 	struct pcmcia_socket *s = p_dev->socket;
@@ -420,6 +462,8 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
 		kfree(win->res);
 		win->res = NULL;
 	}
+	res->start = res->end = 0;
+	res->flags = IORESOURCE_MEM;
 	p_dev->_win &= ~CLIENT_WIN_REQ(w);
 	mutex_unlock(&s->ops_mutex);
 
@@ -428,23 +472,30 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
 EXPORT_SYMBOL(pcmcia_release_window);
 
 
-int pcmcia_request_configuration(struct pcmcia_device *p_dev,
-				 config_req_t *req)
+/**
+ * pcmcia_enable_device() - set up and activate a PCMCIA device
+ * @p_dev: the associated PCMCIA device
+ *
+ * pcmcia_enable_device() physically enables a PCMCIA device. It parses
+ * the flags passed to in @flags and stored in @p_dev->flags and sets up
+ * the Vpp voltage, enables the speaker line, I/O ports and store proper
+ * values to configuration registers.
+ */
+int pcmcia_enable_device(struct pcmcia_device *p_dev)
 {
 	int i;
-	u_int base;
+	unsigned int base;
 	struct pcmcia_socket *s = p_dev->socket;
 	config_t *c;
 	pccard_io_map iomap;
+	unsigned char status = 0;
+	unsigned char ext_status = 0;
+	unsigned char option = 0;
+	unsigned int flags = p_dev->config_flags;
 
 	if (!(s->state & SOCKET_PRESENT))
 		return -ENODEV;
 
-	if (req->IntType & INT_CARDBUS) {
-		dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
-		return -EINVAL;
-	}
-
 	mutex_lock(&s->ops_mutex);
 	c = p_dev->function_config;
 	if (c->state & CONFIG_LOCKED) {
@@ -454,7 +505,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	}
 
 	/* Do power control.  We don't allow changes in Vcc. */
-	s->socket.Vpp = req->Vpp;
+	s->socket.Vpp = p_dev->vpp;
 	if (s->ops->set_socket(s, &s->socket)) {
 		mutex_unlock(&s->ops_mutex);
 		dev_printk(KERN_WARNING, &p_dev->dev,
@@ -463,64 +514,74 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	}
 
 	/* Pick memory or I/O card, DMA mode, interrupt */
-	c->IntType = req->IntType;
-	c->Attributes = req->Attributes;
-	if (req->IntType & INT_MEMORY_AND_IO)
+	if (p_dev->_io || flags & CONF_ENABLE_IRQ)
+		flags |= CONF_ENABLE_IOCARD;
+	if (flags & CONF_ENABLE_IOCARD)
 		s->socket.flags |= SS_IOCARD;
-	if (req->IntType & INT_ZOOMED_VIDEO)
-		s->socket.flags |= SS_ZVCARD | SS_IOCARD;
-	if (req->Attributes & CONF_ENABLE_DMA)
-		s->socket.flags |= SS_DMA_MODE;
-	if (req->Attributes & CONF_ENABLE_SPKR)
+	if (flags & CONF_ENABLE_SPKR) {
 		s->socket.flags |= SS_SPKR_ENA;
-	if (req->Attributes & CONF_ENABLE_IRQ)
+		status = CCSR_AUDIO_ENA;
+		if (!(p_dev->config_regs & PRESENT_STATUS))
+			dev_warn(&p_dev->dev, "speaker requested, but "
+					      "PRESENT_STATUS not set!\n");
+	}
+	if (flags & CONF_ENABLE_IRQ)
 		s->socket.io_irq = s->pcmcia_irq;
 	else
 		s->socket.io_irq = 0;
+	if (flags & CONF_ENABLE_ESR) {
+		p_dev->config_regs |= PRESENT_EXT_STATUS;
+		ext_status = ESR_REQ_ATTN_ENA;
+	}
 	s->ops->set_socket(s, &s->socket);
 	s->lock_count++;
 
+	dev_dbg(&p_dev->dev,
+		"enable_device: V %d, flags %x, base %x, regs %x, idx %x\n",
+		p_dev->vpp, flags, p_dev->config_base, p_dev->config_regs,
+		p_dev->config_index);
+
 	/* Set up CIS configuration registers */
-	base = c->ConfigBase = req->ConfigBase;
-	c->CardValues = req->Present;
-	if (req->Present & PRESENT_COPY) {
-		c->Copy = req->Copy;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy);
-	}
-	if (req->Present & PRESENT_OPTION) {
+	base = p_dev->config_base;
+	if (p_dev->config_regs & PRESENT_COPY) {
+		u16 tmp = 0;
+		dev_dbg(&p_dev->dev, "clearing CISREG_SCR\n");
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &tmp);
+	}
+	if (p_dev->config_regs & PRESENT_PIN_REPLACE) {
+		u16 tmp = 0;
+		dev_dbg(&p_dev->dev, "clearing CISREG_PRR\n");
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &tmp);
+	}
+	if (p_dev->config_regs & PRESENT_OPTION) {
 		if (s->functions == 1) {
-			c->Option = req->ConfigIndex & COR_CONFIG_MASK;
+			option = p_dev->config_index & COR_CONFIG_MASK;
 		} else {
-			c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK;
-			c->Option |= COR_FUNC_ENA|COR_IREQ_ENA;
-			if (req->Present & PRESENT_IOBASE_0)
-				c->Option |= COR_ADDR_DECODE;
+			option = p_dev->config_index & COR_MFC_CONFIG_MASK;
+			option |= COR_FUNC_ENA|COR_IREQ_ENA;
+			if (p_dev->config_regs & PRESENT_IOBASE_0)
+				option |= COR_ADDR_DECODE;
 		}
-		if ((req->Attributes & CONF_ENABLE_IRQ) &&
-			!(req->Attributes & CONF_ENABLE_PULSE_IRQ))
-			c->Option |= COR_LEVEL_REQ;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option);
+		if ((flags & CONF_ENABLE_IRQ) &&
+			!(flags & CONF_ENABLE_PULSE_IRQ))
+			option |= COR_LEVEL_REQ;
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option);
 		mdelay(40);
 	}
-	if (req->Present & PRESENT_STATUS) {
-		c->Status = req->Status;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status);
-	}
-	if (req->Present & PRESENT_PIN_REPLACE) {
-		c->Pin = req->Pin;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin);
-	}
-	if (req->Present & PRESENT_EXT_STATUS) {
-		c->ExtStatus = req->ExtStatus;
-		pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus);
-	}
-	if (req->Present & PRESENT_IOBASE_0) {
+	if (p_dev->config_regs & PRESENT_STATUS)
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status);
+
+	if (p_dev->config_regs & PRESENT_EXT_STATUS)
+		pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1,
+					&ext_status);
+
+	if (p_dev->config_regs & PRESENT_IOBASE_0) {
 		u8 b = c->io[0].start & 0xff;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b);
 		b = (c->io[0].start >> 8) & 0xff;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b);
 	}
-	if (req->Present & PRESENT_IOSIZE) {
+	if (p_dev->config_regs & PRESENT_IOSIZE) {
 		u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b);
 	}
@@ -551,14 +612,15 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	p_dev->_locked = 1;
 	mutex_unlock(&s->ops_mutex);
 	return 0;
-} /* pcmcia_request_configuration */
-EXPORT_SYMBOL(pcmcia_request_configuration);
+} /* pcmcia_enable_device */
+EXPORT_SYMBOL(pcmcia_enable_device);
 
 
 /**
  * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices
+ * @p_dev: the associated PCMCIA device
  *
- * pcmcia_request_io() attepts to reserve the IO port ranges specified in
+ * pcmcia_request_io() attempts to reserve the IO port ranges specified in
  * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The
  * "start" value is the requested start of the IO port resource; "end"
  * reflects the number of ports requested. The number of IO lines requested
@@ -622,11 +684,13 @@ EXPORT_SYMBOL(pcmcia_request_io);
 
 /**
  * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device
+ * @p_dev: the associated PCMCIA device
+ * @handler: IRQ handler to register
  *
- * pcmcia_request_irq() is a wrapper around request_irq which will allow
+ * pcmcia_request_irq() is a wrapper around request_irq() which allows
  * the PCMCIA core to clean up the registration in pcmcia_disable_device().
  * Drivers are free to use request_irq() directly, but then they need to
- * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ
+ * call free_irq() themselfves, too. Also, only %IRQF_SHARED capable IRQ
  * handlers are allowed.
  */
 int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
@@ -649,12 +713,14 @@ EXPORT_SYMBOL(pcmcia_request_irq);
 
 /**
  * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first
+ * @p_dev: the associated PCMCIA device
+ * @handler: IRQ handler to register
  *
- * pcmcia_request_exclusive_irq() is a wrapper around request_irq which
+ * pcmcia_request_exclusive_irq() is a wrapper around request_irq() which
  * attempts first to request an exclusive IRQ. If it fails, it also accepts
  * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for
  * IRQ sharing and either use request_irq directly (then they need to call
- * free_irq themselves, too), or the pcmcia_request_irq() function.
+ * free_irq() themselves, too), or the pcmcia_request_irq() function.
  */
 int __must_check
 __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
@@ -795,38 +861,47 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev)
 }
 
 
-/** pcmcia_request_window
+/**
+ * pcmcia_request_window() - attempt to reserve iomem for PCMCIA devices
+ * @p_dev: the associated PCMCIA device
+ * @res: &struct resource pointing to p_dev->resource[2..5]
+ * @speed: access speed
  *
- * Request_window() establishes a mapping between card memory space
- * and system memory space.
+ * pcmcia_request_window() attepts to reserve an iomem ranges specified in
+ * &struct resource @res pointing to one of the entries in
+ * &struct pcmcia_device @p_dev->resource[2..5]. The "start" value is the
+ * requested start of the IO mem resource; "end" reflects the size
+ * requested.
  */
-int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh)
+int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res,
+			unsigned int speed)
 {
 	struct pcmcia_socket *s = p_dev->socket;
 	pccard_mem_map *win;
 	u_long align;
-	struct resource *res;
 	int w;
 
+	dev_dbg(&p_dev->dev, "request_window %pR %d\n", res, speed);
+
 	if (!(s->state & SOCKET_PRESENT)) {
 		dev_dbg(&p_dev->dev, "No card present\n");
 		return -ENODEV;
 	}
 
 	/* Window size defaults to smallest available */
-	if (req->Size == 0)
-		req->Size = s->map_size;
-	align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
-	if (req->Size & (s->map_size-1)) {
+	if (res->end == 0)
+		res->end = s->map_size;
+	align = (s->features & SS_CAP_MEM_ALIGN) ? res->end : s->map_size;
+	if (res->end & (s->map_size-1)) {
 		dev_dbg(&p_dev->dev, "invalid map size\n");
 		return -EINVAL;
 	}
-	if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
-	    (req->Base & (align-1))) {
+	if ((res->start && (s->features & SS_CAP_STATIC_MAP)) ||
+	    (res->start & (align-1))) {
 		dev_dbg(&p_dev->dev, "invalid base address\n");
 		return -EINVAL;
 	}
-	if (req->Base)
+	if (res->start)
 		align = 0;
 
 	/* Allocate system memory window */
@@ -843,7 +918,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	win = &s->win[w];
 
 	if (!(s->features & SS_CAP_STATIC_MAP)) {
-		win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
+		win->res = pcmcia_find_mem_region(res->start, res->end, align,
 						0, s);
 		if (!win->res) {
 			dev_dbg(&p_dev->dev, "allocating mem region failed\n");
@@ -855,8 +930,8 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 
 	/* Configure the socket controller */
 	win->map = w+1;
-	win->flags = req->Attributes;
-	win->speed = req->AccessSpeed;
+	win->flags = res->flags & WIN_FLAGS_MAP;
+	win->speed = speed;
 	win->card_start = 0;
 
 	if (s->ops->set_mem_map(s, win) != 0) {
@@ -868,17 +943,14 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 
 	/* Return window handle */
 	if (s->features & SS_CAP_STATIC_MAP)
-		req->Base = win->static_start;
+		res->start = win->static_start;
 	else
-		req->Base = win->res->start;
+		res->start = win->res->start;
 
 	/* convert to new-style resources */
-	res = p_dev->resource[w + MAX_IO_WIN];
-	res->start = req->Base;
-	res->end = req->Base + req->Size - 1;
-	res->flags &= ~IORESOURCE_BITS;
-	res->flags |= (req->Attributes & WIN_FLAGS_MAP) | (win->map << 2);
-	res->flags |= IORESOURCE_MEM;
+	res->end += res->start - 1;
+	res->flags &= ~WIN_FLAGS_REQ;
+	res->flags |= (win->map << 2) | IORESOURCE_MEM;
 	res->parent = win->res;
 	if (win->res)
 		request_resource(&iomem_resource, res);
@@ -886,15 +958,30 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	dev_dbg(&p_dev->dev, "request_window results in %pR\n", res);
 
 	mutex_unlock(&s->ops_mutex);
-	*wh = res;
 
 	return 0;
 } /* pcmcia_request_window */
 EXPORT_SYMBOL(pcmcia_request_window);
 
+
+/**
+ * pcmcia_disable_device() - disable and clean up a PCMCIA device
+ * @p_dev: the associated PCMCIA device
+ *
+ * pcmcia_disable_device() is the driver-callable counterpart to
+ * pcmcia_enable_device(): If a PCMCIA device is no longer used,
+ * drivers are expected to clean up and disable the device by calling
+ * this function. Any I/O ranges (iomem and ioports) will be released,
+ * the Vpp voltage will be set to 0, and IRQs will no longer be
+ * generated -- at least if there is no other card function (of
+ * multifunction devices) being used.
+ */
 void pcmcia_disable_device(struct pcmcia_device *p_dev)
 {
 	int i;
+
+	dev_dbg(&p_dev->dev, "disabling device\n");
+
 	for (i = 0; i < MAX_WIN; i++) {
 		struct resource *res = p_dev->resource[MAX_IO_WIN + i];
 		if (res->flags & WIN_FLAGS_REQ)