aboutsummaryrefslogtreecommitdiff
path: root/drivers/nfc/pn544_hci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nfc/pn544_hci.c')
-rw-r--r--drivers/nfc/pn544_hci.c947
1 files changed, 947 insertions, 0 deletions
diff --git a/drivers/nfc/pn544_hci.c b/drivers/nfc/pn544_hci.c
new file mode 100644
index 00000000000..46f4a9f9f5e
--- /dev/null
+++ b/drivers/nfc/pn544_hci.c
@@ -0,0 +1,947 @@
+/*
+ * HCI based Driver for NXP PN544 NFC Chip
+ *
+ * Copyright (C) 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/shdlc.h>
+
+#include <linux/nfc/pn544.h>
+
+#define DRIVER_DESC "HCI NFC driver for PN544"
+
+#define PN544_HCI_DRIVER_NAME "pn544_hci"
+
+/* Timing restrictions (ms) */
+#define PN544_HCI_RESETVEN_TIME 30
+
+static struct i2c_device_id pn544_hci_id_table[] = {
+ {"pn544", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, pn544_hci_id_table);
+
+#define HCI_MODE 0
+#define FW_MODE 1
+
+/* framing in HCI mode */
+#define PN544_HCI_LLC_LEN 1
+#define PN544_HCI_LLC_CRC 2
+#define PN544_HCI_LLC_LEN_CRC (PN544_HCI_LLC_LEN + PN544_HCI_LLC_CRC)
+#define PN544_HCI_LLC_MIN_SIZE (1 + PN544_HCI_LLC_LEN_CRC)
+#define PN544_HCI_LLC_MAX_PAYLOAD 29
+#define PN544_HCI_LLC_MAX_SIZE (PN544_HCI_LLC_LEN_CRC + 1 + \
+ PN544_HCI_LLC_MAX_PAYLOAD)
+
+enum pn544_state {
+ PN544_ST_COLD,
+ PN544_ST_FW_READY,
+ PN544_ST_READY,
+};
+
+#define FULL_VERSION_LEN 11
+
+/* Proprietary commands */
+#define PN544_WRITE 0x3f
+
+/* Proprietary gates, events, commands and registers */
+
+/* NFC_HCI_RF_READER_A_GATE additional registers and commands */
+#define PN544_RF_READER_A_AUTO_ACTIVATION 0x10
+#define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION 0x12
+#define PN544_MIFARE_CMD 0x21
+
+/* Commands that apply to all RF readers */
+#define PN544_RF_READER_CMD_PRESENCE_CHECK 0x30
+#define PN544_RF_READER_CMD_ACTIVATE_NEXT 0x32
+
+/* NFC_HCI_ID_MGMT_GATE additional registers */
+#define PN544_ID_MGMT_FULL_VERSION_SW 0x10
+
+#define PN544_RF_READER_ISO15693_GATE 0x12
+
+#define PN544_RF_READER_F_GATE 0x14
+#define PN544_FELICA_ID 0x04
+#define PN544_FELICA_RAW 0x20
+
+#define PN544_RF_READER_JEWEL_GATE 0x15
+#define PN544_JEWEL_RAW_CMD 0x23
+
+#define PN544_RF_READER_NFCIP1_INITIATOR_GATE 0x30
+#define PN544_RF_READER_NFCIP1_TARGET_GATE 0x31
+
+#define PN544_SYS_MGMT_GATE 0x90
+#define PN544_SYS_MGMT_INFO_NOTIFICATION 0x02
+
+#define PN544_POLLING_LOOP_MGMT_GATE 0x94
+#define PN544_PL_RDPHASES 0x06
+#define PN544_PL_EMULATION 0x07
+#define PN544_PL_NFCT_DEACTIVATED 0x09
+
+#define PN544_SWP_MGMT_GATE 0xA0
+
+#define PN544_NFC_WI_MGMT_GATE 0xA1
+
+static u8 pn544_custom_gates[] = {
+ PN544_SYS_MGMT_GATE,
+ PN544_SWP_MGMT_GATE,
+ PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_NFC_WI_MGMT_GATE,
+ PN544_RF_READER_F_GATE,
+ PN544_RF_READER_JEWEL_GATE,
+ PN544_RF_READER_ISO15693_GATE,
+ PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+ PN544_RF_READER_NFCIP1_TARGET_GATE
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define PN544_CMDS_HEADROOM 2
+
+struct pn544_hci_info {
+ struct i2c_client *i2c_dev;
+ struct nfc_shdlc *shdlc;
+
+ enum pn544_state state;
+
+ struct mutex info_lock;
+
+ unsigned int gpio_en;
+ unsigned int gpio_irq;
+ unsigned int gpio_fw;
+ unsigned int en_polarity;
+
+ int hard_fault; /*
+ * < 0 if hardware error occured (e.g. i2c err)
+ * and prevents normal operation.
+ */
+};
+
+static void pn544_hci_platform_init(struct pn544_hci_info *info)
+{
+ int polarity, retry, ret;
+ char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
+ int count = sizeof(rset_cmd);
+
+ pr_info(DRIVER_DESC ": %s\n", __func__);
+ dev_info(&info->i2c_dev->dev, "Detecting nfc_en polarity\n");
+
+ /* Disable fw download */
+ gpio_set_value(info->gpio_fw, 0);
+
+ for (polarity = 0; polarity < 2; polarity++) {
+ info->en_polarity = polarity;
+ retry = 3;
+ while (retry--) {
+ /* power off */
+ gpio_set_value(info->gpio_en, !info->en_polarity);
+ usleep_range(10000, 15000);
+
+ /* power on */
+ gpio_set_value(info->gpio_en, info->en_polarity);
+ usleep_range(10000, 15000);
+
+ /* send reset */
+ dev_dbg(&info->i2c_dev->dev, "Sending reset cmd\n");
+ ret = i2c_master_send(info->i2c_dev, rset_cmd, count);
+ if (ret == count) {
+ dev_info(&info->i2c_dev->dev,
+ "nfc_en polarity : active %s\n",
+ (polarity == 0 ? "low" : "high"));
+ goto out;
+ }
+ }
+ }
+
+ dev_err(&info->i2c_dev->dev,
+ "Could not detect nfc_en polarity, fallback to active high\n");
+
+out:
+ gpio_set_value(info->gpio_en, !info->en_polarity);
+}
+
+static int pn544_hci_enable(struct pn544_hci_info *info, int mode)
+{
+ pr_info(DRIVER_DESC ": %s\n", __func__);
+
+ gpio_set_value(info->gpio_fw, 0);
+ gpio_set_value(info->gpio_en, info->en_polarity);
+ usleep_range(10000, 15000);
+
+ return 0;
+}
+
+static void pn544_hci_disable(struct pn544_hci_info *info)
+{
+ pr_info(DRIVER_DESC ": %s\n", __func__);
+
+ gpio_set_value(info->gpio_fw, 0);
+ gpio_set_value(info->gpio_en, !info->en_polarity);
+ usleep_range(10000, 15000);
+
+ gpio_set_value(info->gpio_en, info->en_polarity);
+ usleep_range(10000, 15000);
+
+ gpio_set_value(info->gpio_en, !info->en_polarity);
+ usleep_range(10000, 15000);
+}
+
+static int pn544_hci_i2c_write(struct i2c_client *client, u8 *buf, int len)
+{
+ int r;
+
+ usleep_range(3000, 6000);
+
+ r = i2c_master_send(client, buf, len);
+
+ if (r == -EREMOTEIO) { /* Retry, chip was in standby */
+ usleep_range(6000, 10000);
+ r = i2c_master_send(client, buf, len);
+ }
+
+ if (r >= 0 && r != len)
+ r = -EREMOTEIO;
+
+ return r;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+ u8 len;
+ u16 crc;
+
+ len = buf[0] + 1;
+ crc = crc_ccitt(0xffff, buf, len - 2);
+ crc = ~crc;
+
+ if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
+ pr_err(PN544_HCI_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n",
+ crc, buf[len - 1], buf[len - 2]);
+
+ pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+ print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+ 16, 2, buf, buflen, false);
+ return -EPERM;
+ }
+ return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int pn544_hci_i2c_read(struct i2c_client *client, struct sk_buff **skb)
+{
+ int r;
+ u8 len;
+ u8 tmp[PN544_HCI_LLC_MAX_SIZE - 1];
+
+ r = i2c_master_recv(client, &len, 1);
+ if (r != 1) {
+ dev_err(&client->dev, "cannot read len byte\n");
+ return -EREMOTEIO;
+ }
+
+ if ((len < (PN544_HCI_LLC_MIN_SIZE - 1)) ||
+ (len > (PN544_HCI_LLC_MAX_SIZE - 1))) {
+ dev_err(&client->dev, "invalid len byte\n");
+ r = -EBADMSG;
+ goto flush;
+ }
+
+ *skb = alloc_skb(1 + len, GFP_KERNEL);
+ if (*skb == NULL) {
+ r = -ENOMEM;
+ goto flush;
+ }
+
+ *skb_put(*skb, 1) = len;
+
+ r = i2c_master_recv(client, skb_put(*skb, len), len);
+ if (r != len) {
+ kfree_skb(*skb);
+ return -EREMOTEIO;
+ }
+
+ r = check_crc((*skb)->data, (*skb)->len);
+ if (r != 0) {
+ kfree_skb(*skb);
+ r = -EBADMSG;
+ goto flush;
+ }
+
+ skb_pull(*skb, 1);
+ skb_trim(*skb, (*skb)->len - 2);
+
+ usleep_range(3000, 6000);
+
+ return 0;
+
+flush:
+ if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+ r = -EREMOTEIO;
+
+ usleep_range(3000, 6000);
+
+ return r;
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. There are cases where we could loose the frame start synchronization.
+ * The frame format is len-data-crc, and corruption can occur anywhere while
+ * transiting on i2c bus, such that we could read an invalid len.
+ * In order to recover synchronization with the next frame, we must be sure
+ * to read the real amount of data without using the len byte. We do this by
+ * assuming the following:
+ * - the chip will always present only one single complete frame on the bus
+ * before triggering the interrupt
+ * - the chip will not present a new frame until we have completely read
+ * the previous one (or until we have handled the interrupt).
+ * The tricky case is when we read a corrupted len that is less than the real
+ * len. We must detect this here in order to determine that we need to flush
+ * the bus. This is the reason why we check the crc here.
+ */
+static irqreturn_t pn544_hci_irq_thread_fn(int irq, void *dev_id)
+{
+ struct pn544_hci_info *info = dev_id;
+ struct i2c_client *client = info->i2c_dev;
+ struct sk_buff *skb = NULL;
+ int r;
+
+ BUG_ON(!info);
+ BUG_ON(irq != info->i2c_dev->irq);
+
+ dev_dbg(&client->dev, "IRQ\n");
+
+ if (info->hard_fault != 0)
+ return IRQ_HANDLED;
+
+ r = pn544_hci_i2c_read(client, &skb);
+ if (r == -EREMOTEIO) {
+ info->hard_fault = r;
+
+ nfc_shdlc_recv_frame(info->shdlc, NULL);
+
+ return IRQ_HANDLED;
+ } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+ return IRQ_HANDLED;
+ }
+
+ nfc_shdlc_recv_frame(info->shdlc, skb);
+
+ return IRQ_HANDLED;
+}
+
+static int pn544_hci_open(struct nfc_shdlc *shdlc)
+{
+ struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
+ int r = 0;
+
+ mutex_lock(&info->info_lock);
+
+ if (info->state != PN544_ST_COLD) {
+ r = -EBUSY;
+ goto out;
+ }
+
+ r = pn544_hci_enable(info, HCI_MODE);
+
+out:
+ mutex_unlock(&info->info_lock);
+ return r;
+}
+
+static void pn544_hci_close(struct nfc_shdlc *shdlc)
+{
+ struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
+
+ mutex_lock(&info->info_lock);
+
+ if (info->state == PN544_ST_COLD)
+ goto out;
+
+ pn544_hci_disable(info);
+
+out:
+ mutex_unlock(&info->info_lock);
+}
+
+static int pn544_hci_ready(struct nfc_shdlc *shdlc)
+{
+ struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
+ struct sk_buff *skb;
+ static struct hw_config {
+ u8 adr[2];
+ u8 value;
+ } hw_config[] = {
+ {{0x9f, 0x9a}, 0x00},
+
+ {{0x98, 0x10}, 0xbc},
+
+ {{0x9e, 0x71}, 0x00},
+
+ {{0x98, 0x09}, 0x00},
+
+ {{0x9e, 0xb4}, 0x00},
+
+ {{0x9e, 0xd9}, 0xff},
+ {{0x9e, 0xda}, 0xff},
+ {{0x9e, 0xdb}, 0x23},
+ {{0x9e, 0xdc}, 0x21},
+ {{0x9e, 0xdd}, 0x22},
+ {{0x9e, 0xde}, 0x24},
+
+ {{0x9c, 0x01}, 0x08},
+
+ {{0x9e, 0xaa}, 0x01},
+
+ {{0x9b, 0xd1}, 0x0d},
+ {{0x9b, 0xd2}, 0x24},
+ {{0x9b, 0xd3}, 0x0a},
+ {{0x9b, 0xd4}, 0x22},
+ {{0x9b, 0xd5}, 0x08},
+ {{0x9b, 0xd6}, 0x1e},
+ {{0x9b, 0xdd}, 0x1c},
+
+ {{0x9b, 0x84}, 0x13},
+ {{0x99, 0x81}, 0x7f},
+ {{0x99, 0x31}, 0x70},
+
+ {{0x98, 0x00}, 0x3f},
+
+ {{0x9f, 0x09}, 0x00},
+
+ {{0x9f, 0x0a}, 0x05},
+
+ {{0x9e, 0xd1}, 0xa1},
+ {{0x99, 0x23}, 0x00},
+
+ {{0x9e, 0x74}, 0x80},
+
+ {{0x9f, 0x28}, 0x10},
+
+ {{0x9f, 0x35}, 0x14},
+
+ {{0x9f, 0x36}, 0x60},
+
+ {{0x9c, 0x31}, 0x00},
+
+ {{0x9c, 0x32}, 0xc8},
+
+ {{0x9c, 0x19}, 0x40},
+
+ {{0x9c, 0x1a}, 0x40},
+
+ {{0x9c, 0x0c}, 0x00},
+
+ {{0x9c, 0x0d}, 0x00},
+
+ {{0x9c, 0x12}, 0x00},
+
+ {{0x9c, 0x13}, 0x00},
+
+ {{0x98, 0xa2}, 0x0e},
+
+ {{0x98, 0x93}, 0x40},
+
+ {{0x98, 0x7d}, 0x02},
+ {{0x98, 0x7e}, 0x00},
+ {{0x9f, 0xc8}, 0x01},
+ };
+ struct hw_config *p = hw_config;
+ int count = ARRAY_SIZE(hw_config);
+ struct sk_buff *res_skb;
+ u8 param[4];
+ int r;
+
+ param[0] = 0;
+ while (count--) {
+ param[1] = p->adr[0];
+ param[2] = p->adr[1];
+ param[3] = p->value;
+
+ r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE,
+ param, 4, &res_skb);
+ if (r < 0)
+ return r;
+
+ if (res_skb->len != 1) {
+ kfree_skb(res_skb);
+ return -EPROTO;
+ }
+
+ if (res_skb->data[0] != p->value) {
+ kfree_skb(res_skb);
+ return -EIO;
+ }
+
+ kfree_skb(res_skb);
+
+ p++;
+ }
+
+ param[0] = NFC_HCI_UICC_HOST_ID;
+ r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
+ NFC_HCI_ADMIN_WHITELIST, param, 1);
+ if (r < 0)
+ return r;
+
+ param[0] = 0x3d;
+ r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE,
+ PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1);
+ if (r < 0)
+ return r;
+
+ param[0] = 0x0;
+ r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE,
+ PN544_RF_READER_A_AUTO_ACTIVATION, param, 1);
+ if (r < 0)
+ return r;
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+ if (r < 0)
+ return r;
+
+ param[0] = 0x1;
+ r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_PL_NFCT_DEACTIVATED, param, 1);
+ if (r < 0)
+ return r;
+
+ param[0] = 0x0;
+ r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_PL_RDPHASES, param, 1);
+ if (r < 0)
+ return r;
+
+ r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
+ PN544_ID_MGMT_FULL_VERSION_SW, &skb);
+ if (r < 0)
+ return r;
+
+ if (skb->len != FULL_VERSION_LEN) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ skb->data, FULL_VERSION_LEN, false);
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static int pn544_hci_xmit(struct nfc_shdlc *shdlc, struct sk_buff *skb)
+{
+ struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
+ struct i2c_client *client = info->i2c_dev;
+
+ if (info->hard_fault != 0)
+ return info->hard_fault;
+
+ return pn544_hci_i2c_write(client, skb->data, skb->len);
+}
+
+static int pn544_hci_start_poll(struct nfc_shdlc *shdlc, u32 protocols)
+{
+ struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
+ u8 phases = 0;
+ int r;
+ u8 duration[2];
+ u8 activated;
+
+ pr_info(DRIVER_DESC ": %s protocols = %d\n", __func__, protocols);
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+ if (r < 0)
+ return r;
+
+ duration[0] = 0x18;
+ duration[1] = 0x6a;
+ r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_PL_EMULATION, duration, 2);
+ if (r < 0)
+ return r;
+
+ activated = 0;
+ r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_PL_NFCT_DEACTIVATED, &activated, 1);
+ if (r < 0)
+ return r;
+
+ if (protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK |
+ NFC_PROTO_JEWEL_MASK))
+ phases |= 1; /* Type A */
+ if (protocols & NFC_PROTO_FELICA_MASK) {
+ phases |= (1 << 2); /* Type F 212 */
+ phases |= (1 << 3); /* Type F 424 */
+ }
+
+ phases |= (1 << 5); /* NFC active */
+
+ r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+ PN544_PL_RDPHASES, &phases, 1);
+ if (r < 0)
+ return r;
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+ if (r < 0)
+ nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+
+ return r;
+}
+
+static int pn544_hci_target_from_gate(struct nfc_shdlc *shdlc, u8 gate,
+ struct nfc_target *target)
+{
+ switch (gate) {
+ case PN544_RF_READER_F_GATE:
+ target->supported_protocols = NFC_PROTO_FELICA_MASK;
+ break;
+ case PN544_RF_READER_JEWEL_GATE:
+ target->supported_protocols = NFC_PROTO_JEWEL_MASK;
+ target->sens_res = 0x0c00;
+ break;
+ default:
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+static int pn544_hci_complete_target_discovered(struct nfc_shdlc *shdlc,
+ u8 gate,
+ struct nfc_target *target)
+{
+ struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
+ struct sk_buff *uid_skb;
+ int r = 0;
+
+ if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+ if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
+ target->nfcid1_len != 10)
+ return -EPROTO;
+
+ r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+ PN544_RF_READER_CMD_ACTIVATE_NEXT,
+ target->nfcid1, target->nfcid1_len, NULL);
+ } else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) {
+ r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE,
+ PN544_FELICA_ID, &uid_skb);
+ if (r < 0)
+ return r;
+
+ if (uid_skb->len != 8) {
+ kfree_skb(uid_skb);
+ return -EPROTO;
+ }
+
+ r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
+ PN544_RF_READER_CMD_ACTIVATE_NEXT,
+ uid_skb->data, uid_skb->len, NULL);
+ kfree_skb(uid_skb);
+ } else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) {
+ /*
+ * TODO: maybe other ISO 14443 require some kind of continue
+ * activation, but for now we've seen only this one below.
+ */
+ if (target->sens_res == 0x4403) /* Type 4 Mifare DESFire */
+ r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+ PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION,
+ NULL, 0, NULL);
+ }
+
+ return r;
+}
+
+#define MIFARE_CMD_AUTH_KEY_A 0x60
+#define MIFARE_CMD_AUTH_KEY_B 0x61
+#define MIFARE_CMD_HEADER 2
+#define MIFARE_UID_LEN 4
+#define MIFARE_KEY_LEN 6
+#define MIFARE_CMD_LEN 12
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ * 1: driver doesn't especially handle, please do standard processing
+ */
+static int pn544_hci_data_exchange(struct nfc_shdlc *shdlc,
+ struct nfc_target *target,
+ struct sk_buff *skb,
+ struct sk_buff **res_skb)
+{
+ struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
+ int r;
+
+ pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__,
+ target->hci_reader_gate);
+
+ switch (target->hci_reader_gate) {
+ case NFC_HCI_RF_READER_A_GATE:
+ if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+ /*
+ * It seems that pn544 is inverting key and UID for
+ * MIFARE authentication commands.
+ */
+ if (skb->len == MIFARE_CMD_LEN &&
+ (skb->data[0] == MIFARE_CMD_AUTH_KEY_A ||
+ skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) {
+ u8 uid[MIFARE_UID_LEN];
+ u8 *data = skb->data + MIFARE_CMD_HEADER;
+
+ memcpy(uid, data + MIFARE_KEY_LEN,
+ MIFARE_UID_LEN);
+ memmove(data + MIFARE_UID_LEN, data,
+ MIFARE_KEY_LEN);
+ memcpy(data, uid, MIFARE_UID_LEN);
+ }
+
+ return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ PN544_MIFARE_CMD,
+ skb->data, skb->len, res_skb);
+ } else
+ return 1;
+ case PN544_RF_READER_F_GATE:
+ *skb_push(skb, 1) = 0;
+ *skb_push(skb, 1) = 0;
+
+ r = nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ PN544_FELICA_RAW,
+ skb->data, skb->len, res_skb);
+ if (r == 0)
+ skb_pull(*res_skb, 1);
+ return r;
+ case PN544_RF_READER_JEWEL_GATE:
+ return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ PN544_JEWEL_RAW_CMD,
+ skb->data, skb->len, res_skb);
+ default:
+ return 1;
+ }
+}
+
+static int pn544_hci_check_presence(struct nfc_shdlc *shdlc,
+ struct nfc_target *target)
+{
+ struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
+
+ return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ PN544_RF_READER_CMD_PRESENCE_CHECK,
+ NULL, 0, NULL);
+}
+
+static struct nfc_shdlc_ops pn544_shdlc_ops = {
+ .open = pn544_hci_open,
+ .close = pn544_hci_close,
+ .hci_ready = pn544_hci_ready,
+ .xmit = pn544_hci_xmit,
+ .start_poll = pn544_hci_start_poll,
+ .target_from_gate = pn544_hci_target_from_gate,
+ .complete_target_discovered = pn544_hci_complete_target_discovered,
+ .data_exchange = pn544_hci_data_exchange,
+ .check_presence = pn544_hci_check_presence,
+};
+
+static int __devinit pn544_hci_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pn544_hci_info *info;
+ struct pn544_nfc_platform_data *pdata;
+ int r = 0;
+ u32 protocols;
+ struct nfc_hci_init_data init_data;
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+ dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "Need I2C_FUNC_I2C\n");
+ return -ENODEV;
+ }
+
+ info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&client->dev,
+ "Cannot allocate memory for pn544_hci_info.\n");
+ r = -ENOMEM;
+ goto err_info_alloc;
+ }
+
+ info->i2c_dev = client;
+ info->state = PN544_ST_COLD;
+ mutex_init(&info->info_lock);
+ i2c_set_clientdata(client, info);
+
+ pdata = client->dev.platform_data;
+ if (pdata == NULL) {
+ dev_err(&client->dev, "No platform data\n");
+ r = -EINVAL;
+ goto err_pdata;
+ }
+
+ if (pdata->request_resources == NULL) {
+ dev_err(&client->dev, "request_resources() missing\n");
+ r = -EINVAL;
+ goto err_pdata;
+ }
+
+ r = pdata->request_resources(client);
+ if (r) {
+ dev_err(&client->dev, "Cannot get platform resources\n");
+ goto err_pdata;
+ }
+
+ info->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
+ info->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
+ info->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
+
+ pn544_hci_platform_init(info);
+
+ r = request_threaded_irq(client->irq, NULL, pn544_hci_irq_thread_fn,
+ IRQF_TRIGGER_RISING, PN544_HCI_DRIVER_NAME,
+ info);
+ if (r < 0) {
+ dev_err(&client->dev, "Unable to register IRQ handler\n");
+ goto err_rti;
+ }
+
+ init_data.gate_count = ARRAY_SIZE(pn544_custom_gates);
+
+ memcpy(init_data.gates, pn544_custom_gates,
+ ARRAY_SIZE(pn544_custom_gates));
+
+ /*
+ * TODO: Session id must include the driver name + some bus addr
+ * persistent info to discriminate 2 identical chips
+ */
+ strcpy(init_data.session_id, "ID544HCI");
+
+ protocols = NFC_PROTO_JEWEL_MASK |
+ NFC_PROTO_MIFARE_MASK |
+ NFC_PROTO_FELICA_MASK |
+ NFC_PROTO_ISO14443_MASK |
+ NFC_PROTO_NFC_DEP_MASK;
+
+ info->shdlc = nfc_shdlc_allocate(&pn544_shdlc_ops,
+ &init_data, protocols,
+ PN544_CMDS_HEADROOM, 0,
+ PN544_HCI_LLC_MAX_PAYLOAD,
+ dev_name(&client->dev));
+ if (!info->shdlc) {
+ dev_err(&client->dev, "Cannot allocate nfc shdlc.\n");
+ r = -ENOMEM;
+ goto err_allocshdlc;
+ }
+
+ nfc_shdlc_set_clientdata(info->shdlc, info);
+
+ return 0;
+
+err_allocshdlc:
+ free_irq(client->irq, info);
+
+err_rti:
+ if (pdata->free_resources != NULL)
+ pdata->free_resources();
+
+err_pdata:
+ kfree(info);
+
+err_info_alloc:
+ return r;
+}
+
+static __devexit int pn544_hci_remove(struct i2c_client *client)
+{
+ struct pn544_hci_info *info = i2c_get_clientdata(client);
+ struct pn544_nfc_platform_data *pdata = client->dev.platform_data;
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ nfc_shdlc_free(info->shdlc);
+
+ if (info->state != PN544_ST_COLD) {
+ if (pdata->disable)
+ pdata->disable();
+ }
+
+ free_irq(client->irq, info);
+ if (pdata->free_resources)
+ pdata->free_resources();
+
+ kfree(info);
+
+ return 0;
+}
+
+static struct i2c_driver pn544_hci_driver = {
+ .driver = {
+ .name = PN544_HCI_DRIVER_NAME,
+ },
+ .probe = pn544_hci_probe,
+ .id_table = pn544_hci_id_table,
+ .remove = __devexit_p(pn544_hci_remove),
+};
+
+static int __init pn544_hci_init(void)
+{
+ int r;
+
+ pr_debug(DRIVER_DESC ": %s\n", __func__);
+
+ r = i2c_add_driver(&pn544_hci_driver);
+ if (r) {
+ pr_err(PN544_HCI_DRIVER_NAME ": driver registration failed\n");
+ return r;
+ }
+
+ return 0;
+}
+
+static void __exit pn544_hci_exit(void)
+{
+ i2c_del_driver(&pn544_hci_driver);
+}
+
+module_init(pn544_hci_init);
+module_exit(pn544_hci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);