aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/3c527.c4
-rw-r--r--drivers/net/appletalk/ipddp.c2
-rw-r--r--drivers/net/benet/be_hw.h2
-rw-r--r--drivers/net/gianfar.c2
-rw-r--r--drivers/net/hp100.c2
-rw-r--r--drivers/net/ibm_newemac/core.c2
-rw-r--r--drivers/net/ksz884x.c2
-rw-r--r--drivers/net/ll_temac_main.c2
-rw-r--r--drivers/net/sh_eth.c2
-rw-r--r--drivers/net/tulip/dmfe.c20
-rw-r--r--drivers/net/wimax/i2400m/control.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_hw.c2
13 files changed, 23 insertions, 23 deletions
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395dfa496..70705d1306b 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee3582..0362c8d31a0 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 6c8f9bb8bfe..5d38046402b 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -52,7 +52,7 @@
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
-/********* Power managment (WOL) **********/
+/********* Power management (WOL) **********/
#define PCICFG_PM_CONTROL_OFFSET 0x44
#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 27f02970d89..a1b6301bc67 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -917,7 +917,7 @@ static void gfar_init_filer_table(struct gfar_private *priv)
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
- /* cur_filer_idx indicated the fisrt non-masked rule */
+ /* cur_filer_idx indicated the first non-masked rule */
priv->cur_filer_idx = rqfar;
/* Rest are masked rules */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index ce587f4c420..095b17ecf60 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1072,7 +1072,7 @@ static void hp100_mmuinit(struct net_device *dev)
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b150c102ca5..0f1d4e96cf8 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 8b32cc107f0..37504a39890 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6810,7 +6810,7 @@ static int stp;
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index b5c6279cc5a..4eea3f70c5c 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -497,7 +497,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 32f2deaa38b..f5a9eb1df59 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1376,7 +1376,7 @@ static int sh_mdio_init(struct net_device *ndev, int id)
bitbang->mdc_msk = 0x01;
bitbang->ctrl.ops = &bb_ops;
- /* MII contorller setting */
+ /* MII controller setting */
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63d39f..0bc4f3030a8 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 2f725d0cc76..9fb03082153 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 9cadaa296fa..dbb986946e1 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1224,7 +1224,7 @@ static void ap_crypt_init(struct ap_data *ap)
/* Generate challenge data for shared key authentication. IEEE 802.11 specifies
- * that WEP algorithm is used for generating challange. This should be unique,
+ * that WEP algorithm is used for generating challenge. This should be unique,
* but otherwise there is not really need for randomness etc. Initialize WEP
* with pseudo random key and then use increasing IV to get unique challenge
* streams.
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 2f999fc94f6..e9d9d622a9b 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1896,7 +1896,7 @@ fail:
/* Some SMP systems have reported number of odd errors with hostap_pci. fid
* register has changed values between consecutive reads for an unknown reason.
* This should really not happen, so more debugging is needed. This test
- * version is a big slower, but it will detect most of such register changes
+ * version is a bit slower, but it will detect most of such register changes
* and will try to get the correct fid eventually. */
#define EXTRA_FID_READ_TESTS
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 08:43:09 +0000