13 files changed, 94 insertions, 68 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 42408d7dc1c..8799caf64c9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -623,26 +623,6 @@ config SIS900
 	  To compile this driver as a module, choose M here: the module
 	  will be called sis900.  This is recommended.
 
-config SUNDANCE
-	tristate "Sundance Alta support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the Sundance "Alta" chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on SUNDANCE
-	help
-	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
-	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
-	  is known to solve bugs on certain chips.
-
-	  If unsure, say N.
-
 config TLAN
 	tristate "TI ThunderLAN support"
 	depends on NET_PCI && (PCI || EISA)
@@ -740,36 +720,6 @@ config NET_POCKET
 	  the questions about this class of network devices. If you say Y, you
 	  will be asked for your specific device in the following questions.
 
-config DE600
-	tristate "D-Link DE600 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de600.
-
-config DE620
-	tristate "D-Link DE620 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de620.
-
 config SGISEEQ
 	tristate "SGI Seeq ethernet controller support"
 	depends on SGI_HAS_SEEQ
@@ -862,20 +812,6 @@ menuconfig NETDEV_1000
 
 if NETDEV_1000
 
-config DL2K
-	tristate "DL2000/TC902x-based Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
-	  which includes
-	  D-Link DGE-550T Gigabit Ethernet Adapter.
-	  D-Link DL2000-based Gigabit Ethernet Adapter.
-	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dl2k.
-
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d142fc5ef68..ecd8c9f664d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 # end link order section
 #
 
-obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
@@ -106,8 +105,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
 obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -123,7 +120,6 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index fecac79b009..8007e20972e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0092c30db18..22ef3808f43 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
new file mode 100644
index 00000000000..9fdb66b66f1
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -0,0 +1,84 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+	bool "D-Link devices"
+	depends on PCI || PARPORT
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about D-Link devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+	tristate "D-Link DE600 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de600.
+
+config DE620
+	tristate "D-Link DE620 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de620.
+
+config DL2K
+	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+	  which includes
+	  D-Link DGE-550T Gigabit Ethernet Adapter.
+	  D-Link DL2000-based Gigabit Ethernet Adapter.
+	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dl2k.
+
+config SUNDANCE
+	tristate "Sundance Alta support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver is for the Sundance "Alta" chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on SUNDANCE
+	---help---
+	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
+	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+	  is known to solve bugs on certain chips.
+
+	  If unsure, say N.
+
+endif # NET_VENDOR_DLINK
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
new file mode 100644
index 00000000000..c705eaa4f5b
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c
index 23a65398d01..23a65398d01 100644
--- a/drivers/net/de600.c
+++ b/drivers/net/ethernet/dlink/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h
index e80ecbabcf4..e80ecbabcf4 100644
--- a/drivers/net/de600.h
+++ b/drivers/net/ethernet/dlink/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c
index 1c51a757611..1c51a757611 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/ethernet/dlink/de620.c
diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h
index e8d9a88f4cb..e8d9a88f4cb 100644
--- a/drivers/net/de620.h
+++ b/drivers/net/ethernet/dlink/de620.h
diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index ed73e4a9350..ed73e4a9350 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 7caab3d26a9..7caab3d26a9 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
diff --git a/drivers/net/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 4793df843c2..4793df843c2 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c