aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/pcmcia/3c574_cs.c14
-rw-r--r--drivers/net/pcmcia/3c589_cs.c14
-rw-r--r--drivers/net/pcmcia/axnet_cs.c48
-rw-r--r--drivers/net/pcmcia/com20020_cs.c22
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c48
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c29
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c32
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c63
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c71
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c60
-rw-r--r--drivers/net/wireless/airo_cs.c74
-rw-r--r--drivers/net/wireless/atmel_cs.c25
-rw-r--r--drivers/net/wireless/b43/pcmcia.c13
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c136
-rw-r--r--drivers/net/wireless/libertas/if_cs.c16
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c30
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c62
-rw-r--r--drivers/net/wireless/ray_cs.c27
-rw-r--r--drivers/net/wireless/wl3501_cs.c24
19 files changed, 311 insertions, 497 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 10ee106a161..c683f77c6f4 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -87,7 +87,6 @@ earlier 3Com products.
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -279,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->window_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -338,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "3c574_config()\n");
- link->io.IOAddrLines = 16;
+ link->io_lines = 16;
+
for (i = j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
@@ -357,7 +357,7 @@ static int tc574_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ce63c3773b4..61f9cf2100f 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -41,7 +41,6 @@
#include <linux/bitops.h>
#include <linux/jiffies.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -214,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -278,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link)
"3Com card??\n");
multi = (link->card_id == PRODID_3COM_3C562);
+ link->io_lines = 16;
+
/* For the 3c562, the base address must be xx00-xx7f */
- link->io.IOAddrLines = 16;
for (i = j = 0; j < 0x400; j += 0x10) {
if (multi && (j & 0x80)) continue;
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
@@ -299,7 +299,7 @@ static int tc589_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
EL3WINDOW(0);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 33525bf2a3d..5f05ffb240c 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -260,28 +259,30 @@ static int get_prom(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* for master/slave multifunction cards */
- if (link->io.NumPorts2 > 0)
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->end > 0)
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -302,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return -ENODEV;
@@ -333,7 +334,7 @@ static int axnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (link->io.NumPorts2 == 8) {
+ if (resource_size(link->resource[1]) == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
@@ -343,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (!get_prom(link)) {
printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n");
@@ -379,8 +380,7 @@ static int axnet_config(struct pcmcia_device *link)
/* Maybe PHY is in power down mode. (PPD_SET = 1)
Bit 2 of CCSR is active low. */
if (i == 32) {
- conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 };
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
for (i = 0; i < 32; i++) {
j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 5643f94541b..3c400cfa82a 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
#include <linux/arcdevice.h>
#include <linux/com20020.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -159,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts1 = 16;
- p_dev->io.IOAddrLines = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -246,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "com20020_config\n");
- dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int) link->resource[0]->start);
+
i = -ENODEV;
- if (!link->io.BasePort1)
+ link->io_lines = 16;
+
+ if (!link->resource[0]->start)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
- link->io.BasePort1 = ioaddr;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
}
else
- i = pcmcia_request_io(link, &link->io);
+ i = pcmcia_request_io(link);
if (i != 0)
{
@@ -267,7 +269,7 @@ static int com20020_config(struct pcmcia_device *link)
goto failed;
}
- ioaddr = dev->base_addr = link->io.BasePort1;
+ ioaddr = dev->base_addr = link->resource[0]->start;
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
dev_dbg(&link->dev, "request IRQ %d\n",
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 7c27c50211a..98fffb03ecd 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -49,7 +49,6 @@
#include <linux/ioport.h>
#include <linux/crc32.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -249,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
lp->base = NULL;
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -289,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link)
{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
for (i = 0; i < 5; i++) {
- link->io.BasePort2 = serial_base[i];
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- if (link->io.BasePort2 == 0) {
- link->io.NumPorts2 = 0;
+ link->resource[1]->start = serial_base[i];
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->start == 0) {
+ link->resource[1]->end = 0;
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
@@ -311,12 +309,12 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
0x380,0x3c0 only for ioport.
*/
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
- link->io.BasePort1 = ioaddr;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ ret = pcmcia_request_io(link);
if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
- ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
+ ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
return ret;
}
}
@@ -346,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "fmvj18x_config\n");
+ link->io_lines = 5;
+
len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
kfree(buf);
@@ -364,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link)
/* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
}
break;
case MANFID_NEC:
cardtype = NEC; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_KME:
cardtype = KME; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_CONTEC:
cardtype = CONTEC;
@@ -418,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
}
- if (link->io.NumPorts2 != 0) {
+ if (link->resource[1]->end != 0) {
ret = mfc_try_io_port(link);
if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
if (ret != 0) goto failed;
} else {
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
@@ -437,9 +437,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
- if (link->io.BasePort2 != 0) {
+ if (resource_size(link->resource[1]) != 0) {
ret = fmvj18x_setup_mfc(link);
if (ret != 0) goto failed;
}
@@ -545,7 +545,6 @@ failed:
static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
{
win_req_t req;
- memreq_t mem;
u_char __iomem *base;
int i, j;
@@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(req.Base, req.Size);
- mem.Page = 0;
- mem.CardOffset = 0;
- pcmcia_map_mem_page(link, link->win, &mem);
+ pcmcia_map_mem_page(link, link->win, 0);
/*
* MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
static int fmvj18x_setup_mfc(struct pcmcia_device *link)
{
win_req_t req;
- memreq_t mem;
int i;
struct net_device *dev = link->priv;
unsigned int ioaddr;
@@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
return -1;
}
- mem.Page = 0;
- mem.CardOffset = 0;
- i = pcmcia_map_mem_page(link, link->win, &mem);
+ i = pcmcia_map_mem_page(link, link->win, 0);
if (i != 0) {
iounmap(lp->base);
lp->base = NULL;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 67ee9851a8e..b0d06a3d962 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -57,7 +57,6 @@
#include <linux/trdevice.h>
#include <linux/ibmtr.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -152,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->priv = info;
info->ti = netdev_priv(dev);
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 4;
- link->io.IOAddrLines = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 4;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -213,26 +211,26 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
struct net_device *dev = info->dev;
struct tok_info *ti = netdev_priv(dev);
win_req_t req;
- memreq_t mem;
int i, ret;
dev_dbg(&link->dev, "ibmtr_config\n");
link->conf.ConfigIndex = 0x61;
+ link->io_lines = 16;
/* Determine if this is PRIMARY or ALTERNATE. */
/* Try PRIMARY card at 0xA20-0xA23 */
- link->io.BasePort1 = 0xA20;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA20;
+ i = pcmcia_request_io(link);
if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
- link->io.BasePort1 = 0xA24;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA24;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
if (ret)
@@ -251,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (ret)
goto failed;
- mem.CardOffset = mmiobase;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->win, mmiobase);
if (ret)
goto failed;
ti->mmio = ioremap(req.Base, req.Size);
@@ -268,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (ret)
goto failed;
- mem.CardOffset = srambase;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
+ ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase);
if (ret)
goto failed;
- ti->sram_base = mem.CardOffset >> 12;
+ ti->sram_base = srambase >> 12;
ti->sram_virt = ioremap(req.Base, req.Size);
ti->sram_phys = req.Base;
@@ -325,7 +319,6 @@ static void ibmtr_release(struct pcmcia_device *link)
if (link->win) {
struct tok_info *ti = netdev_priv(dev);
iounmap(ti->mmio);
- pcmcia_release_window(link, info->sram_win_handle);
}
pcmcia_disable_device(link);
}
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 9b63dec549c..68f2deeb3ad 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -146,7 +146,6 @@ Include Files
#include <linux/ioport.h>
#include <linux/bitops.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/cistpl.h>
@@ -459,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&lp->bank_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -645,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "nmclan_config\n");
- ret = pcmcia_request_io(link, &link->io);
+ link->io_lines = 5;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
@@ -656,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
@@ -758,29 +757,20 @@ static void nmclan_reset(struct net_device *dev)
#if RESET_XILINX
struct pcmcia_device *link = &lp->link;
- conf_reg_t reg;
- u_long OrigCorValue;
+ u8 OrigCorValue;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- pcmcia_access_configuration_register(link, &reg);
- OrigCorValue = reg.Value;
+ pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
/* Reset Xilinx */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+ dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
OrigCorValue);
- reg.Value = COR_SOFT_RESET;
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
/* Need to wait for 20 ms for PCMCIA to finish reset. */
/* Restore original COR configuration index */
- reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_COR,
+ (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
/* Xilinx is now completely reset along with the MACE chip. */
lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bfdef72c5d5..c3edfe4c265 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -42,7 +42,6 @@
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -113,8 +112,6 @@ static int setup_dma_config(struct pcmcia_device *link, int start_pg,
static void pcnet_detach(struct pcmcia_device *p_dev);
-static dev_info_t dev_info = "pcnet_cs";
-
/*====================================================================*/
typedef struct hw_info_t {
@@ -304,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
win_req_t req;
- memreq_t mem;
u_char __iomem *base, *virt;
int i, j;
@@ -317,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
return NULL;
virt = ioremap(req.Base, req.Size);
- mem.Page = 0;
for (i = 0; i < NR_INFO; i++) {
- mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
- pcmcia_map_mem_page(link, link->win, &mem);
+ pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1));
base = &virt[hw_info[i].offset & (req.Size-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
@@ -480,29 +474,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (link->io.NumPorts2 > 0) {
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ if (link->resource[1]->end > 0) {
/* for master/slave multifunction cards */
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
}
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -523,18 +519,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
*has_shmem = ((cfg->mem.nwin == 1) &&
(cfg->mem.win[0].len >= 0x4000));
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return 0;
@@ -557,7 +553,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (link->io.NumPorts2 == 8) {
+ if (resource_size(link->resource[1]) == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
@@ -569,7 +565,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (info->flags & HAS_MISC_REG) {
if ((if_port == 1) || (if_port == 2))
dev->if_port = if_port;
@@ -956,7 +952,7 @@ static int pcnet_open(struct net_device *dev)
set_misc_reg(dev);
outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
- ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
+ ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
@@ -1464,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
win_req_t req;
- memreq_t mem;
int i, window_size, offset, ret;
window_size = (stop_pg - start_pg) << 8;
@@ -1483,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
if (ret)
goto failed;
- mem.CardOffset = (start_pg << 8) + cm_offset;
- offset = mem.CardOffset % window_size;
- mem.CardOffset -= offset;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ offset = (start_pg << 8) + cm_offset;
+ offset -= offset % window_size;
+ ret = pcmcia_map_mem_page(link, link->win, offset);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 307cd1721e9..377367d03b4 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -44,7 +44,6 @@
#include <linux/jiffies.h>
#include <linux/firmware.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -325,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&smc->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 4;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -428,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
int k;
- p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[0].base;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
continue;
- p_dev->io.BasePort1 = k ^ 0x300;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = k ^ 0x300;
+ p_dev->io_lines = 16;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -444,21 +443,20 @@ static int mhz_mfc_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
win_req_t req;
- memreq_t mem;
+ unsigned int offset;
int i;
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.IOAddrLines = 16;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
return -ENODEV;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
/* Allocate a memory window, for accessing the ISR */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
@@ -469,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
return -ENODEV;
smc->base = ioremap(req.Base, req.Size);
- mem.CardOffset = mem.Page = 0;
- if (smc->manfid == MANFID_MOTOROLA)
- mem.CardOffset = link->conf.ConfigBase;
- i = pcmcia_map_mem_page(link, link->win, &mem);
-
+ offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
+ i = pcmcia_map_mem_page(link, link->win, offset);
if ((i == 0) &&
(smc->manfid == MANFID_MEGAHERTZ) &&
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
@@ -546,7 +541,7 @@ static void mot_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- unsigned int iouart = link->io.BasePort2;
+ unsigned int iouart = link->resource[1]->start;
/* Set UART base address and force map with COR bit 1 */
writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
@@ -602,9 +597,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev);
}
static int smc_config(struct pcmcia_device *link)
@@ -612,10 +607,10 @@ static int smc_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
int i;
- link->io.NumPorts1 = 16;
+ link->resource[0]->end = 16;
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
return i;
}
@@ -647,27 +642,27 @@ static int osi_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.NumPorts1 = 64;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
- link->io.IOAddrLines = 16;
+ link->resource[0]->end = 64;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* Enable Hard Decode, LAN, Modem */
link->conf.ConfigIndex = 0x23;
+ link->io_lines = 16;
for (i = j = 0; j < 4; j++) {
- link->io.BasePort2 = com[j];
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->start = com[j];
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
- link->io.NumPorts2 = 0;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->end = 0;
+ i = pcmcia_request_io(link);
}
- dev->base_addr = link->io.BasePort1 + 0x10;
+ dev->base_addr = link->resource[0]->start + 0x10;
return i;
}
@@ -684,7 +679,7 @@ static int osi_load_firmware(struct pcmcia_device *link)
/* Download the Seven of Diamonds firmware */
for (i = 0; i < fw->size; i++) {
- outb(fw->data[i], link->io.BasePort1 + 2);
+ outb(fw->data[i], link->resource[0]->start + 2);
udelay(50);
}
release_firmware(fw);
@@ -726,12 +721,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
return rc;
} else if (manfid == MANFID_OSITECH) {
/* Make sure both functions are powered up */
- set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
/* Now, turn on the interrupt for both card functions */
- set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
- inw(link->io.BasePort1 + OSITECH_AUI_PWR),
- inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+ inw(link->resource[0]->start + OSITECH_AUI_PWR),
+ inw(link->resource[0]->start + OSITECH_RESET_ISR));
}
return 0;
}
@@ -804,7 +799,7 @@ static int check_sig(struct pcmcia_device *link)
}
/* Try setting bus width */
- width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+ width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
s = inb(ioaddr + CONFIG);
if (width)
s |= CFG_16BIT;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b6c3644888c..4eb6f986703 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -82,7 +82,6 @@
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -678,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = ioaddr;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -697,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
int *pass = priv_data;
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = p_dev->io.BasePort2
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = p_dev->resource[1]->start
+ (*pass ? (cf->index & 0x20 ? -24:8)
: (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -808,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link)
goto failure;
}
- link->io.IOAddrLines =10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
if (local->modem) {
int pass;
@@ -817,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
- link->io.NumPorts2 = 8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+ link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->io.NumPorts1 = 18;
+ link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
@@ -841,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link)
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->io.NumPorts1 = 16;
+ link->io_lines = 10;
+ link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = ioaddr;
+ if (!(err = pcmcia_request_io(link)))
goto port_found;
}
- link->io.BasePort1 = 0; /* let CS decide */
- if ((err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = 0; /* let CS decide */
+ if ((err = pcmcia_request_io(link)))
goto config_error;
}
port_found:
@@ -870,24 +869,21 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
if (local->dingo) {
- conf_reg_t reg;
win_req_t req;
- memreq_t mem;
/* Reset the modem's BAR to the correct value
* This is necessary because in the RequestConfiguration call,
* the base address of the ethernet port (BasePort1) is written
* to the BAR registers of the modem.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_0;
- reg.Value = link->io.BasePort2 & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+ link->resource[1]->start & 0xff);
+ if (err)
goto config_error;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_1;
- reg.Value = (link->io.BasePort2 >> 8) & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+ (link->resource[1]->start >> 8) & 0xff);
+ if (err)
goto config_error;
/* There is no config entry for the Ethernet part which
@@ -901,16 +897,14 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
- mem.CardOffset = 0x0;
- mem.Page = 0;
- if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
+ if ((err = pcmcia_map_mem_page(link, link->win, 0)))
goto config_error;
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
* part.
*/
writeb(0x47, local->dingo_ccr + CISREG_COR);
- ioaddr = link->io.BasePort1;
+ ioaddr = link->resource[0]->start;
writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
@@ -957,7 +951,7 @@ xirc2ps_config(struct pcmcia_device * link)
/* we can now register the device with the net subsystem */
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 33bdc6a84e8..9a121a5b787 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
#include <linux/timer.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -155,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -176,52 +173,25 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- memreq_t map;
- req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
- return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -230,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
- win_req_t *req;
int ret;
dev = link->priv;
dev_dbg(&link->dev, "airo_config\n");
- req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -255,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -272,7 +237,7 @@ static int airo_config(struct pcmcia_device *link)
goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq,
- link->io.BasePort1, 1, &link->dev);
+ link->resource[0]->start, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
@@ -282,22 +247,15 @@ static int airo_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req->Base,
- req->Base+req->Size-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
- kfree(req);
return 0;
failed:
airo_release(link);
- kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c2746fc7f2b..3b632161c10 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -191,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int atmel_config(struct pcmcia_device *link)
@@ -254,7 +251,7 @@ static int atmel_config(struct pcmcia_device *link)
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq,
- link->io.BasePort1,
+ link->resource[0]->start,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
&link->dev,
card_present,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 0e99b634267..dfbc41d431f 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -65,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
{
struct ssb_bus *ssb;
win_req_t win;
- memreq_t mem;
int err = -ENOMEM;
int res = 0;
@@ -78,12 +76,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
- dev->io.BasePort2 = 0;
- dev->io.NumPorts2 = 0;
- dev->io.Attributes2 = 0;
-
- win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
- WIN_ENABLE | WIN_DATA_WIDTH_16 |
+ win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
win.Base = 0;
win.Size = SSB_CORE_SIZE;
@@ -92,9 +85,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != 0)
goto err_kfree_ssb;
- mem.CardOffset = 0;
- mem.Page = 0;
- res = pcmcia_map_mem_page(dev, dev->win, &mem);
+ res = pcmcia_map_mem_page(dev, dev->win, 0);
if (res != 0)
goto err_disable;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 29b31a694b5..ba54d1b04d2 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -23,7 +22,7 @@
#include "hostap_wlan.h"
-static dev_info_t dev_info = "hostap_cs";
+static char *dev_info = "hostap_cs";
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
@@ -225,27 +224,18 @@ static int prism2_pccard_card_present(local_info_t *local)
static void sandisk_set_iobase(local_info_t *local)
{
int res;
- conf_reg_t reg;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x10; /* 0x3f0 IO base 1 */
- reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x10,
+ hw_priv->link->resource[0]->start & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
udelay(10);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x12; /* 0x3f2 IO base 2 */
- reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x12,
+ (hw_priv->link->resource[0]->start >> 8) & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
@@ -271,12 +261,11 @@ static void sandisk_write_hcr(local_info_t *local, int hcr)
static int sandisk_enable_wireless(struct net_device *dev)
{
int res, ret = 0;
- conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- if (hw_priv->link->io.NumPorts1 < 0x42) {
+ if (resource_size(hw_priv->link->resource[0]) < 0x42) {
/* Not enough ports to be SanDisk multi-function card */
ret = -ENODEV;
goto done;
@@ -298,12 +287,8 @@ static int sandisk_enable_wireless(struct net_device *dev)
" - using vendor-specific initialization\n", dev->name);
hw_priv->sandisk_connectplus = 1;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -311,16 +296,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
}
mdelay(5);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
/*
* Do not enable interrupts here to avoid some bogus events. Interrupts
* will be enabled during the first cor_sreset call.
*/
- reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ (COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
+ COR_FUNC_ENA));
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -343,30 +325,23 @@ done:
static void prism2_pccard_cor_sreset(local_info_t *local)
{
int res;
- conf_reg_t reg;
+ u8 val;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
}
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
- reg.Value);
+ val);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ val |= COR_SOFT_RESET;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
@@ -375,11 +350,10 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
- reg.Value &= ~COR_SOFT_RESET;
+ val &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
- reg.Value |= COR_IREQ_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ val |= COR_IREQ_ENA;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
@@ -396,8 +370,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
{
int res;
- conf_reg_t reg;
- int old_cor;
+ u8 old_cor;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
@@ -408,25 +381,17 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
return;
}
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
}
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
- reg.Value);
- old_cor = reg.Value;
+ old_cor);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor | COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
@@ -436,11 +401,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
mdelay(10);
/* Setup Genesis mode */
- reg.Action = CS_WRITE;
- reg.Value = hcr;
- reg.Offset = CISREG_CCSR;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
@@ -448,11 +409,8 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
}
mdelay(10);
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = old_cor & ~COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor & ~COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
@@ -561,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
"dflt->io.nwin=%d\n",
cfg->io.nwin, dflt->io.nwin);
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int prism2_config(struct pcmcia_device *link)
@@ -646,7 +598,7 @@ static int prism2_config(struct pcmcia_device *link)
goto failed_unlock;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
@@ -658,12 +610,10 @@ static int prism2_config(struct pcmcia_device *link)
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
local->shutdown = 0;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 08e4e390800..9c298396be5 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
#include <linux/firmware.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -802,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -816,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int if_cs_probe(struct pcmcia_device *p_dev)
@@ -854,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
/* Initialize io access */
- card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+ card->iobase = ioport_map(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]));
if (!card->iobase) {
lbs_pr_err("error in ioport_map\n");
ret = -EIO;
@@ -873,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
}
/* Finally, report what we've done */
- lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
- p_dev->irq, p_dev->io.BasePort1,
- p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+ lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]);
/*
* Most of the libertas cards can do unaligned register access, but some
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index b16d5db52a4..ef46a2d8853 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -192,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
@@ -258,7 +255,8 @@ orinoco_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -280,7 +278,7 @@ orinoco_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index b51a9adc80f..873877e17e1 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -80,35 +79,27 @@ static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
int ret;
- conf_reg_t reg;
- u_int save_cor;
+ u8 save_cor;
+ u8 ccsr;
/* Doing it if hardware is gone is guaranteed crash */
if (!pcmcia_dev_present(link))
return -ENODEV;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
if (ret)
goto failed;
- save_cor = reg.Value;
/* Soft-Reset card */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor | COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor | COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
/* Read CCSR */
- reg.Action = CS_READ;
- reg.Offset = CISREG_CCSR;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
if (ret)
goto failed;
@@ -116,19 +107,15 @@ spectrum_reset(struct pcmcia_device *link, int idle)
* Start or stop the firmware. Memory width bit should be
* preserved from the value we've just read.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_CCSR;
- reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
+ ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
if (ret)
goto failed;
udelay(1000);
/* Restore original COR configuration index */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor & ~COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor & ~COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
@@ -266,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
@@ -332,7 +317,8 @@ spectrum_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -359,7 +345,7 @@ spectrum_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 9c38fc331dc..88560d0ae50 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
#include <linux/ethtool.h>
#include <linux/ieee80211.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -315,9 +314,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->finder = p_dev;
/* The io structure describes IO port mapping. None used here */
- p_dev->io.NumPorts1 = 0;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 0;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -394,7 +392,6 @@ static int ray_config(struct pcmcia_device *link)
int ret = 0;
int i;
win_req_t req;
- memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
@@ -431,9 +428,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &link->win);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->win, 0);
if (ret)
goto failed;
local->sram = ioremap(req.Base, req.Size);
@@ -447,9 +442,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->rmem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x8000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
if (ret)
goto failed;
local->rmem = ioremap(req.Base, req.Size);
@@ -463,9 +456,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->amem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
if (ret)
goto failed;
local->amem = ioremap(req.Base, req.Size);
@@ -793,7 +784,6 @@ static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
ray_dev_t *local = netdev_priv(dev);
- int i;
dev_dbg(&link->dev, "ray_release\n");
@@ -802,13 +792,6 @@ static void ray_release(struct pcmcia_device *link)
iounmap(local->sram);
iounmap(local->rmem);
iounmap(local->amem);
- /* Do bother checking to see if these succeed or not */
- i = pcmcia_release_window(link, local->amem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
- i = pcmcia_release_window(link, local->rmem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
dev_dbg(&link->dev, "ray_release ending\n");
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 376c6b964a9..a1cc2d498a1 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
#include <net/iw_handler.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -89,13 +88,6 @@
static int wl3501_config(struct pcmcia_device *link);
static void wl3501_release(struct pcmcia_device *link);
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-static dev_info_t wl3501_dev_info = "wl3501_cs";
-
static const struct {
int reg_domain;
int min, max, deflt;
@@ -1421,7 +1413,7 @@ static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev)
static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
+ strlcpy(info->driver, "wl3501_cs", sizeof(info->driver));
}
static const struct ethtool_ops ops = {
@@ -1892,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
struct wl3501_card *this;
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1940,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
/* Try allocating IO ports. This tries a few fixed addresses. If you
* want, you can also read the card's config table to pick addresses --
* see the serial driver for an example. */
+ link->io_lines = 5;
for (j = 0x280; j < 0x400; j += 0x20) {
/* The '^0x300' is so that we probe 0x300-0x3ff first, then
* 0x200-0x2ff, and so on, because this seems safer */
- link->io.BasePort1 = j;
- link->io.BasePort2 = link->io.BasePort1 + 0x10;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j;
+ link->resource[1]->start = link->resource[0]->start + 0x10;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
@@ -1968,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-28 07:13:05 +0000