aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c74
-rw-r--r--drivers/net/wireless/atmel_cs.c25
-rw-r--r--drivers/net/wireless/b43/pcmcia.c13
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c136
-rw-r--r--drivers/net/wireless/libertas/if_cs.c16
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c30
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c62
-rw-r--r--drivers/net/wireless/ray_cs.c27
-rw-r--r--drivers/net/wireless/wl3501_cs.c24
9 files changed, 130 insertions, 277 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 33bdc6a84e8..9a121a5b787 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
#include <linux/timer.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -155,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -176,52 +173,25 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- memreq_t map;
- req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
- return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -230,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
- win_req_t *req;
int ret;
dev = link->priv;
dev_dbg(&link->dev, "airo_config\n");
- req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -255,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -272,7 +237,7 @@ static int airo_config(struct pcmcia_device *link)
goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq,
- link->io.BasePort1, 1, &link->dev);
+ link->resource[0]->start, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
@@ -282,22 +247,15 @@ static int airo_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req->Base,
- req->Base+req->Size-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
- kfree(req);
return 0;
failed:
airo_release(link);
- kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c2746fc7f2b..3b632161c10 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -191,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int atmel_config(struct pcmcia_device *link)
@@ -254,7 +251,7 @@ static int atmel_config(struct pcmcia_device *link)
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq,
- link->io.BasePort1,
+ link->resource[0]->start,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
&link->dev,
card_present,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 0e99b634267..dfbc41d431f 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -65,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
{
struct ssb_bus *ssb;
win_req_t win;
- memreq_t mem;
int err = -ENOMEM;
int res = 0;
@@ -78,12 +76,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
- dev->io.BasePort2 = 0;
- dev->io.NumPorts2 = 0;
- dev->io.Attributes2 = 0;
-
- win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
- WIN_ENABLE | WIN_DATA_WIDTH_16 |
+ win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
win.Base = 0;
win.Size = SSB_CORE_SIZE;
@@ -92,9 +85,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != 0)
goto err_kfree_ssb;
- mem.CardOffset = 0;
- mem.Page = 0;
- res = pcmcia_map_mem_page(dev, dev->win, &mem);
+ res = pcmcia_map_mem_page(dev, dev->win, 0);
if (res != 0)
goto err_disable;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 29b31a694b5..ba54d1b04d2 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -23,7 +22,7 @@
#include "hostap_wlan.h"
-static dev_info_t dev_info = "hostap_cs";
+static char *dev_info = "hostap_cs";
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
@@ -225,27 +224,18 @@ static int prism2_pccard_card_present(local_info_t *local)
static void sandisk_set_iobase(local_info_t *local)
{
int res;
- conf_reg_t reg;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x10; /* 0x3f0 IO base 1 */
- reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x10,
+ hw_priv->link->resource[0]->start & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
udelay(10);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x12; /* 0x3f2 IO base 2 */
- reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x12,
+ (hw_priv->link->resource[0]->start >> 8) & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
@@ -271,12 +261,11 @@ static void sandisk_write_hcr(local_info_t *local, int hcr)
static int sandisk_enable_wireless(struct net_device *dev)
{
int res, ret = 0;
- conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- if (hw_priv->link->io.NumPorts1 < 0x42) {
+ if (resource_size(hw_priv->link->resource[0]) < 0x42) {
/* Not enough ports to be SanDisk multi-function card */
ret = -ENODEV;
goto done;
@@ -298,12 +287,8 @@ static int sandisk_enable_wireless(struct net_device *dev)
" - using vendor-specific initialization\n", dev->name);
hw_priv->sandisk_connectplus = 1;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -311,16 +296,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
}
mdelay(5);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
/*
* Do not enable interrupts here to avoid some bogus events. Interrupts
* will be enabled during the first cor_sreset call.
*/
- reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ (COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
+ COR_FUNC_ENA));
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -343,30 +325,23 @@ done:
static void prism2_pccard_cor_sreset(local_info_t *local)
{
int res;
- conf_reg_t reg;
+ u8 val;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
}
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
- reg.Value);
+ val);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ val |= COR_SOFT_RESET;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
@@ -375,11 +350,10 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
- reg.Value &= ~COR_SOFT_RESET;
+ val &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
- reg.Value |= COR_IREQ_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ val |= COR_IREQ_ENA;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
@@ -396,8 +370,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
{
int res;
- conf_reg_t reg;
- int old_cor;
+ u8 old_cor;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
@@ -408,25 +381,17 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
return;
}
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
}
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
- reg.Value);
- old_cor = reg.Value;
+ old_cor);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor | COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
@@ -436,11 +401,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
mdelay(10);
/* Setup Genesis mode */
- reg.Action = CS_WRITE;
- reg.Value = hcr;
- reg.Offset = CISREG_CCSR;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
@@ -448,11 +409,8 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
}
mdelay(10);
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = old_cor & ~COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- &reg);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor & ~COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
@@ -561,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
"dflt->io.nwin=%d\n",
cfg->io.nwin, dflt->io.nwin);
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int prism2_config(struct pcmcia_device *link)
@@ -646,7 +598,7 @@ static int prism2_config(struct pcmcia_device *link)
goto failed_unlock;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
@@ -658,12 +610,10 @@ static int prism2_config(struct pcmcia_device *link)
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
local->shutdown = 0;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 08e4e390800..9c298396be5 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
#include <linux/firmware.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -802,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -816,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int if_cs_probe(struct pcmcia_device *p_dev)
@@ -854,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
/* Initialize io access */
- card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+ card->iobase = ioport_map(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]));
if (!card->iobase) {
lbs_pr_err("error in ioport_map\n");
ret = -EIO;
@@ -873,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
}
/* Finally, report what we've done */
- lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
- p_dev->irq, p_dev->io.BasePort1,
- p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+ lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]);
/*
* Most of the libertas cards can do unaligned register access, but some
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index b16d5db52a4..ef46a2d8853 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -192,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
@@ -258,7 +255,8 @@ orinoco_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -280,7 +278,7 @@ orinoco_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index b51a9adc80f..873877e17e1 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -80,35 +79,27 @@ static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
int ret;
- conf_reg_t reg;
- u_int save_cor;
+ u8 save_cor;
+ u8 ccsr;
/* Doing it if hardware is gone is guaranteed crash */
if (!pcmcia_dev_present(link))
return -ENODEV;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
if (ret)
goto failed;
- save_cor = reg.Value;
/* Soft-Reset card */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor | COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor | COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
/* Read CCSR */
- reg.Action = CS_READ;
- reg.Offset = CISREG_CCSR;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
if (ret)
goto failed;
@@ -116,19 +107,15 @@ spectrum_reset(struct pcmcia_device *link, int idle)
* Start or stop the firmware. Memory width bit should be
* preserved from the value we've just read.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_CCSR;
- reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
+ ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
if (ret)
goto failed;
udelay(1000);
/* Restore original COR configuration index */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor & ~COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor & ~COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
@@ -266,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
@@ -332,7 +317,8 @@ spectrum_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -359,7 +345,7 @@ spectrum_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 9c38fc331dc..88560d0ae50 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
#include <linux/ethtool.h>
#include <linux/ieee80211.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -315,9 +314,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->finder = p_dev;
/* The io structure describes IO port mapping. None used here */
- p_dev->io.NumPorts1 = 0;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 0;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -394,7 +392,6 @@ static int ray_config(struct pcmcia_device *link)
int ret = 0;
int i;
win_req_t req;
- memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
@@ -431,9 +428,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &link->win);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->win, 0);
if (ret)
goto failed;
local->sram = ioremap(req.Base, req.Size);
@@ -447,9 +442,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->rmem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x8000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
if (ret)
goto failed;
local->rmem = ioremap(req.Base, req.Size);
@@ -463,9 +456,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->amem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
if (ret)
goto failed;
local->amem = ioremap(req.Base, req.Size);
@@ -793,7 +784,6 @@ static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
ray_dev_t *local = netdev_priv(dev);
- int i;
dev_dbg(&link->dev, "ray_release\n");
@@ -802,13 +792,6 @@ static void ray_release(struct pcmcia_device *link)
iounmap(local->sram);
iounmap(local->rmem);
iounmap(local->amem);
- /* Do bother checking to see if these succeed or not */
- i = pcmcia_release_window(link, local->amem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
- i = pcmcia_release_window(link, local->rmem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
dev_dbg(&link->dev, "ray_release ending\n");
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 376c6b964a9..a1cc2d498a1 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
#include <net/iw_handler.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -89,13 +88,6 @@
static int wl3501_config(struct pcmcia_device *link);
static void wl3501_release(struct pcmcia_device *link);
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-static dev_info_t wl3501_dev_info = "wl3501_cs";
-
static const struct {
int reg_domain;
int min, max, deflt;
@@ -1421,7 +1413,7 @@ static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev)
static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
+ strlcpy(info->driver, "wl3501_cs", sizeof(info->driver));
}
static const struct ethtool_ops ops = {
@@ -1892,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
struct wl3501_card *this;
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1940,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
/* Try allocating IO ports. This tries a few fixed addresses. If you
* want, you can also read the card's config table to pick addresses --
* see the serial driver for an example. */
+ link->io_lines = 5;
for (j = 0x280; j < 0x400; j += 0x20) {
/* The '^0x300' is so that we probe 0x300-0x3ff first, then
* 0x200-0x2ff, and so on, because this seems safer */
- link->io.BasePort1 = j;
- link->io.BasePort2 = link->io.BasePort1 + 0x10;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j;
+ link->resource[1]->start = link->resource[0]->start + 0x10;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
@@ -1968,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-11 23:22:59 +0000