1 files changed, 139 insertions, 14 deletions

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 3291ffa9527..757e25784a8 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -28,6 +28,7 @@
 #include <linux/etherdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/netdevice.h>
 
 #include "wl1251.h"
 #include "wl12xx_80211.h"
@@ -479,10 +480,13 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
 	wl->next_tx_complete = 0;
 	wl->elp = false;
 	wl->station_mode = STATION_ACTIVE_MODE;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
 	wl->rssi_thold = 0;
 	wl->channel = WL1251_DEFAULT_CHANNEL;
+	wl->monitor_present = false;
+	wl->joined = false;
 
 	wl1251_debugfs_reset(wl);
 
@@ -521,7 +525,7 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
+	if (!ether_addr_equal_unaligned(wl->mac_addr, vif->addr)) {
 		memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
 		ret = wl1251_acx_station_id(wl);
@@ -542,6 +546,7 @@ static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
 	mutex_lock(&wl->mutex);
 	wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
 	wl->vif = NULL;
+	memset(wl->bssid, 0, ETH_ALEN);
 	mutex_unlock(&wl->mutex);
 }
 
@@ -566,6 +571,11 @@ static int wl1251_build_qos_null_data(struct wl1251 *wl)
 				       sizeof(template));
 }
 
+static bool wl1251_can_do_pm(struct ieee80211_conf *conf, struct wl1251 *wl)
+{
+	return (conf->flags & IEEE80211_CONF_PS) && !wl->monitor_present;
+}
+
 static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct wl1251 *wl = hw->priv;
@@ -575,8 +585,10 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 	channel = ieee80211_frequency_to_channel(
 			conf->chandef.chan->center_freq);
 
-	wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+	wl1251_debug(DEBUG_MAC80211,
+		     "mac80211 config ch %d monitor %s psm %s power %d",
 		     channel,
+		     conf->flags & IEEE80211_CONF_MONITOR ? "on" : "off",
 		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
 		     conf->power_level);
 
@@ -586,16 +598,44 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (ret < 0)
 		goto out;
 
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		u32 mode;
+
+		if (conf->flags & IEEE80211_CONF_MONITOR) {
+			wl->monitor_present = true;
+			mode = DF_SNIFF_MODE_ENABLE | DF_ENCRYPTION_DISABLE;
+		} else {
+			wl->monitor_present = false;
+			mode = 0;
+		}
+
+		ret = wl1251_acx_feature_cfg(wl, mode);
+		if (ret < 0)
+			goto out_sleep;
+	}
+
 	if (channel != wl->channel) {
 		wl->channel = channel;
 
-		ret = wl1251_join(wl, wl->bss_type, wl->channel,
-				  wl->beacon_int, wl->dtim_period);
+		/*
+		 * Use ENABLE_RX command for channel switching when no
+		 * interface is present (monitor mode only).
+		 * This leaves the tx path disabled in firmware, whereas
+		 * the usual JOIN command seems to transmit some frames
+		 * at firmware level.
+		 */
+		if (wl->vif == NULL) {
+			wl->joined = false;
+			ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
+		} else {
+			ret = wl1251_join(wl, wl->bss_type, wl->channel,
+					  wl->beacon_int, wl->dtim_period);
+		}
 		if (ret < 0)
 			goto out_sleep;
 	}
 
-	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+	if (wl1251_can_do_pm(conf, wl) && !wl->psm_requested) {
 		wl1251_debug(DEBUG_PSM, "psm enabled");
 
 		wl->psm_requested = true;
@@ -611,8 +651,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
 		if (ret < 0)
 			goto out_sleep;
-	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
-		   wl->psm_requested) {
+	} else if (!wl1251_can_do_pm(conf, wl) && wl->psm_requested) {
 		wl1251_debug(DEBUG_PSM, "psm disabled");
 
 		wl->psm_requested = false;
@@ -648,6 +687,16 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 		wl->power_level = conf->power_level;
 	}
 
+	/*
+	 * Tell stack that connection is lost because hw encryption isn't
+	 * supported in monitor mode.
+	 * This requires temporary enabling of the hw connection monitor flag
+	 */
+	if ((changed & IEEE80211_CONF_CHANGE_MONITOR) && wl->vif) {
+		wl->hw->flags |= IEEE80211_HW_CONNECTION_MONITOR;
+		ieee80211_connection_loss(wl->vif);
+	}
+
 out_sleep:
 	wl1251_ps_elp_sleep(wl);
 
@@ -657,6 +706,44 @@ out:
 	return ret;
 }
 
+struct wl1251_filter_params {
+	bool enabled;
+	int mc_list_length;
+	u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
+};
+
+static u64 wl1251_op_prepare_multicast(struct ieee80211_hw *hw,
+				       struct netdev_hw_addr_list *mc_list)
+{
+	struct wl1251_filter_params *fp;
+	struct netdev_hw_addr *ha;
+	struct wl1251 *wl = hw->priv;
+
+	if (unlikely(wl->state == WL1251_STATE_OFF))
+		return 0;
+
+	fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
+	if (!fp) {
+		wl1251_error("Out of memory setting filters.");
+		return 0;
+	}
+
+	/* update multicast filtering parameters */
+	fp->mc_list_length = 0;
+	if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) {
+		fp->enabled = false;
+	} else {
+		fp->enabled = true;
+		netdev_hw_addr_list_for_each(ha, mc_list) {
+			memcpy(fp->mc_list[fp->mc_list_length],
+					ha->addr, ETH_ALEN);
+			fp->mc_list_length++;
+		}
+	}
+
+	return (u64)(unsigned long)fp;
+}
+
 #define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
 				  FIF_ALLMULTI | \
 				  FIF_FCSFAIL | \
@@ -667,8 +754,9 @@ out:
 
 static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 				       unsigned int changed,
-				       unsigned int *total,u64 multicast)
+				       unsigned int *total, u64 multicast)
 {
+	struct wl1251_filter_params *fp = (void *)(unsigned long)multicast;
 	struct wl1251 *wl = hw->priv;
 	int ret;
 
@@ -677,9 +765,11 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 	*total &= WL1251_SUPPORTED_FILTERS;
 	changed &= WL1251_SUPPORTED_FILTERS;
 
-	if (changed == 0)
+	if (changed == 0) {
 		/* no filters which we support changed */
+		kfree(fp);
 		return;
+	}
 
 	mutex_lock(&wl->mutex);
 
@@ -716,6 +806,15 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
+	if (*total & FIF_ALLMULTI || *total & FIF_PROMISC_IN_BSS)
+		ret = wl1251_acx_group_address_tbl(wl, false, NULL, 0);
+	else if (fp)
+		ret = wl1251_acx_group_address_tbl(wl, fp->enabled,
+						   fp->mc_list,
+						   fp->mc_list_length);
+	if (ret < 0)
+		goto out;
+
 	/* send filters to firmware */
 	wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
 
@@ -723,6 +822,7 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 
 out:
 	mutex_unlock(&wl->mutex);
+	kfree(fp);
 }
 
 /* HW encryption */
@@ -802,12 +902,12 @@ static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	mutex_lock(&wl->mutex);
 
-	ret = wl1251_ps_elp_wakeup(wl);
-	if (ret < 0)
-		goto out_unlock;
-
 	switch (cmd) {
 	case SET_KEY:
+		if (wl->monitor_present) {
+			ret = -EOPNOTSUPP;
+			goto out_unlock;
+		}
 		wl_cmd->key_action = KEY_ADD_OR_REPLACE;
 		break;
 	case DISABLE_KEY:
@@ -818,6 +918,10 @@ static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	}
 
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out_unlock;
+
 	ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
 	if (ret < 0) {
 		wl1251_error("Set KEY type failed");
@@ -930,6 +1034,7 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 	ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
 			      req->n_channels, WL1251_SCAN_NUM_PROBES);
 	if (ret < 0) {
+		wl1251_debug(DEBUG_SCAN, "scan failed %d", ret);
 		wl->scanning = false;
 		goto out_idle;
 	}
@@ -977,6 +1082,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct wl1251 *wl = hw->priv;
 	struct sk_buff *beacon, *skb;
+	bool enable;
 	int ret;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1023,6 +1129,9 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
+		/* Disable temporary enabled hw connection monitor flag */
+		wl->hw->flags &= ~IEEE80211_HW_CONNECTION_MONITOR;
+
 		if (bss_conf->assoc) {
 			wl->beacon_int = bss_conf->beacon_int;
 
@@ -1075,6 +1184,17 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if (changed & BSS_CHANGED_ARP_FILTER) {
+		__be32 addr = bss_conf->arp_addr_list[0];
+		WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
+
+		enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
+		wl1251_acx_arp_ip_filter(wl, enable, addr);
+
+		if (ret < 0)
+			goto out_sleep;
+	}
+
 	if (changed & BSS_CHANGED_BEACON) {
 		beacon = ieee80211_beacon_get(hw, vif);
 		if (!beacon)
@@ -1245,6 +1365,7 @@ static const struct ieee80211_ops wl1251_ops = {
 	.add_interface = wl1251_op_add_interface,
 	.remove_interface = wl1251_op_remove_interface,
 	.config = wl1251_op_config,
+	.prepare_multicast = wl1251_op_prepare_multicast,
 	.configure_filter = wl1251_op_configure_filter,
 	.tx = wl1251_op_tx,
 	.set_key = wl1251_op_set_key,
@@ -1347,7 +1468,6 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 
 	/* unit us */
 	/* FIXME: find a proper value */
-	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
@@ -1401,7 +1521,10 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
 
 	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
 	wl->channel = WL1251_DEFAULT_CHANNEL;
+	wl->monitor_present = false;
+	wl->joined = false;
 	wl->scanning = false;
+	wl->bss_type = MAX_BSS_TYPE;
 	wl->default_key = 0;
 	wl->listen_int = 1;
 	wl->rx_counter = 0;
@@ -1413,6 +1536,7 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
 	wl->elp = false;
 	wl->station_mode = STATION_ACTIVE_MODE;
 	wl->psm_requested = false;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
 	wl->rssi_thold = 0;
@@ -1478,3 +1602,4 @@ MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
 MODULE_FIRMWARE(WL1251_FW_NAME);
+MODULE_FIRMWARE(WL1251_NVS_NAME);