diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8188ee/sw.c')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8188ee/sw.c | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c new file mode 100644 index 00000000000..c254693a1e6 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c @@ -0,0 +1,400 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2013 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../core.h" +#include "../pci.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "hw.h" +#include "sw.h" +#include "trx.h" +#include "led.h" +#include "table.h" + +#include <linux/vmalloc.h> +#include <linux/module.h> + +static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + /*close ASPM for AMD defaultly */ + rtlpci->const_amdpci_aspm = 0; + + /* ASPM PS mode. + * 0 - Disable ASPM, + * 1 - Enable ASPM without Clock Req, + * 2 - Enable ASPM with Clock Req, + * 3 - Alwyas Enable ASPM with Clock Req, + * 4 - Always Enable ASPM without Clock Req. + * set defult to RTL8192CE:3 RTL8192E:2 + */ + rtlpci->const_pci_aspm = 3; + + /*Setting for PCI-E device */ + rtlpci->const_devicepci_aspm_setting = 0x03; + + /*Setting for PCI-E bridge */ + rtlpci->const_hostpci_aspm_setting = 0x02; + + /* In Hw/Sw Radio Off situation. + * 0 - Default, + * 1 - From ASPM setting without low Mac Pwr, + * 2 - From ASPM setting with low Mac Pwr, + * 3 - Bus D3 + * set default to RTL8192CE:0 RTL8192SE:2 + */ + rtlpci->const_hwsw_rfoff_d3 = 0; + + /* This setting works for those device with + * backdoor ASPM setting such as EPHY setting. + * 0 - Not support ASPM, + * 1 - Support ASPM, + * 2 - According to chipset. + */ + rtlpci->const_support_pciaspm = 1; +} + +int rtl88e_init_sw_vars(struct ieee80211_hw *hw) +{ + int err = 0; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u8 tid; + + rtl8188ee_bt_reg_init(hw); + + rtlpriv->dm.dm_initialgain_enable = 1; + rtlpriv->dm.dm_flag = 0; + rtlpriv->dm.disable_framebursting = 0; + rtlpriv->dm.thermalvalue = 0; + rtlpci->transmit_config = CFENDFORM | BIT(15); + + /* compatible 5G band 88ce just 2.4G band & smsp */ + rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G; + rtlpriv->rtlhal.bandset = BAND_ON_2_4G; + rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY; + + rtlpci->receive_config = (RCR_APPFCS | + RCR_APP_MIC | + RCR_APP_ICV | + RCR_APP_PHYST_RXFF | + RCR_HTC_LOC_CTRL | + RCR_AMF | + RCR_ACF | + RCR_ADF | + RCR_AICV | + RCR_ACRC32 | + RCR_AB | + RCR_AM | + RCR_APM | + 0); + + rtlpci->irq_mask[0] = + (u32) (IMR_PSTIMEOUT | + IMR_HSISR_IND_ON_INT | + IMR_C2HCMD | + IMR_HIGHDOK | + IMR_MGNTDOK | + IMR_BKDOK | + IMR_BEDOK | + IMR_VIDOK | + IMR_VODOK | + IMR_RDU | + IMR_ROK | + 0); + rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0); + rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN); + + /* for debug level */ + rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug; + /* for LPS & IPS */ + rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; + rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; + rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; + if (!rtlpriv->psc.inactiveps) + pr_info("rtl8188ee: Power Save off (module option)\n"); + if (!rtlpriv->psc.fwctrl_lps) + pr_info("rtl8188ee: FW Power Save off (module option)\n"); + rtlpriv->psc.reg_fwctrl_lps = 3; + rtlpriv->psc.reg_max_lps_awakeintvl = 5; + /* for ASPM, you can close aspm through + * set const_support_pciaspm = 0 + */ + rtl88e_init_aspm_vars(hw); + + if (rtlpriv->psc.reg_fwctrl_lps == 1) + rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 2) + rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 3) + rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; + + /* for firmware buf */ + rtlpriv->rtlhal.pfirmware = vmalloc(0x8000); + if (!rtlpriv->rtlhal.pfirmware) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Can't alloc buffer for fw.\n"); + return 1; + } + + rtlpriv->cfg->fw_name = "rtlwifi/rtl8188efw.bin"; + rtlpriv->max_fw_size = 0x8000; + pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name); + err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name, + rtlpriv->io.dev, GFP_KERNEL, hw, + rtl_fw_cb); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Failed to request firmware!\n"); + return 1; + } + + /* for early mode */ + rtlpriv->rtlhal.earlymode_enable = false; + rtlpriv->rtlhal.max_earlymode_num = 10; + for (tid = 0; tid < 8; tid++) + skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]); + + /*low power */ + rtlpriv->psc.low_power_enable = false; + if (rtlpriv->psc.low_power_enable) { + init_timer(&rtlpriv->works.fw_clockoff_timer); + setup_timer(&rtlpriv->works.fw_clockoff_timer, + rtl88ee_fw_clk_off_timer_callback, + (unsigned long)hw); + } + + init_timer(&rtlpriv->works.fast_antenna_training_timer); + setup_timer(&rtlpriv->works.fast_antenna_training_timer, + rtl88e_dm_fast_antenna_training_callback, + (unsigned long)hw); + return err; +} + +void rtl88e_deinit_sw_vars(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->rtlhal.pfirmware) { + vfree(rtlpriv->rtlhal.pfirmware); + rtlpriv->rtlhal.pfirmware = NULL; + } + + if (rtlpriv->psc.low_power_enable) + del_timer_sync(&rtlpriv->works.fw_clockoff_timer); + + del_timer_sync(&rtlpriv->works.fast_antenna_training_timer); +} + +static struct rtl_hal_ops rtl8188ee_hal_ops = { + .init_sw_vars = rtl88e_init_sw_vars, + .deinit_sw_vars = rtl88e_deinit_sw_vars, + .read_eeprom_info = rtl88ee_read_eeprom_info, + .interrupt_recognized = rtl88ee_interrupt_recognized,/*need check*/ + .hw_init = rtl88ee_hw_init, + .hw_disable = rtl88ee_card_disable, + .hw_suspend = rtl88ee_suspend, + .hw_resume = rtl88ee_resume, + .enable_interrupt = rtl88ee_enable_interrupt, + .disable_interrupt = rtl88ee_disable_interrupt, + .set_network_type = rtl88ee_set_network_type, + .set_chk_bssid = rtl88ee_set_check_bssid, + .set_qos = rtl88ee_set_qos, + .set_bcn_reg = rtl88ee_set_beacon_related_registers, + .set_bcn_intv = rtl88ee_set_beacon_interval, + .update_interrupt_mask = rtl88ee_update_interrupt_mask, + .get_hw_reg = rtl88ee_get_hw_reg, + .set_hw_reg = rtl88ee_set_hw_reg, + .update_rate_tbl = rtl88ee_update_hal_rate_tbl, + .fill_tx_desc = rtl88ee_tx_fill_desc, + .fill_tx_cmddesc = rtl88ee_tx_fill_cmddesc, + .query_rx_desc = rtl88ee_rx_query_desc, + .set_channel_access = rtl88ee_update_channel_access_setting, + .radio_onoff_checking = rtl88ee_gpio_radio_on_off_checking, + .set_bw_mode = rtl88e_phy_set_bw_mode, + .switch_channel = rtl88e_phy_sw_chnl, + .dm_watchdog = rtl88e_dm_watchdog, + .scan_operation_backup = rtl88e_phy_scan_operation_backup, + .set_rf_power_state = rtl88e_phy_set_rf_power_state, + .led_control = rtl88ee_led_control, + .set_desc = rtl88ee_set_desc, + .get_desc = rtl88ee_get_desc, + .tx_polling = rtl88ee_tx_polling, + .enable_hw_sec = rtl88ee_enable_hw_security_config, + .set_key = rtl88ee_set_key, + .init_sw_leds = rtl88ee_init_sw_leds, + .allow_all_destaddr = rtl88ee_allow_all_destaddr, + .get_bbreg = rtl88e_phy_query_bb_reg, + .set_bbreg = rtl88e_phy_set_bb_reg, + .get_rfreg = rtl88e_phy_query_rf_reg, + .set_rfreg = rtl88e_phy_set_rf_reg, +}; + +static struct rtl_mod_params rtl88ee_mod_params = { + .sw_crypto = false, + .inactiveps = true, + .swctrl_lps = false, + .fwctrl_lps = true, + .debug = DBG_EMERG, +}; + +static struct rtl_hal_cfg rtl88ee_hal_cfg = { + .bar_id = 2, + .write_readback = true, + .name = "rtl88e_pci", + .ops = &rtl8188ee_hal_ops, + .mod_params = &rtl88ee_mod_params, + + .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL, + .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN, + .maps[SYS_CLK] = REG_SYS_CLKR, + .maps[MAC_RCR_AM] = AM, + .maps[MAC_RCR_AB] = AB, + .maps[MAC_RCR_ACRC32] = ACRC32, + .maps[MAC_RCR_ACF] = ACF, + .maps[MAC_RCR_AAP] = AAP, + + .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS, + + .maps[EFUSE_TEST] = REG_EFUSE_TEST, + .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_CLK] = 0, + .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_PWC_EV12V] = PWC_EV12V, + .maps[EFUSE_FEN_ELDR] = FEN_ELDR, + .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN, + .maps[EFUSE_ANA8M] = ANA8M, + .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE, + .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, + .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, + .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES, + + .maps[RWCAM] = REG_CAMCMD, + .maps[WCAMI] = REG_CAMWRITE, + .maps[RCAMO] = REG_CAMREAD, + .maps[CAMDBG] = REG_CAMDBG, + .maps[SECR] = REG_SECCFG, + .maps[SEC_CAM_NONE] = CAM_NONE, + .maps[SEC_CAM_WEP40] = CAM_WEP40, + .maps[SEC_CAM_TKIP] = CAM_TKIP, + .maps[SEC_CAM_AES] = CAM_AES, + .maps[SEC_CAM_WEP104] = CAM_WEP104, + + .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6, + .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5, + .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4, + .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3, + .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2, + .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1, +/* .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, */ /*need check*/ + .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7, + .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6, + .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5, + .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4, + .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3, + .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2, + .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1, +/* .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/ +/* .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/ + + .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, + .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, + .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0, + .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, + .maps[RTL_IMR_RDU] = IMR_RDU, + .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, + .maps[RTL_IMR_BDOK] = IMR_BCNDOK0, + .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK, + .maps[RTL_IMR_TBDER] = IMR_TBDER, + .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK, + .maps[RTL_IMR_TBDOK] = IMR_TBDOK, + .maps[RTL_IMR_BKDOK] = IMR_BKDOK, + .maps[RTL_IMR_BEDOK] = IMR_BEDOK, + .maps[RTL_IMR_VIDOK] = IMR_VIDOK, + .maps[RTL_IMR_VODOK] = IMR_VODOK, + .maps[RTL_IMR_ROK] = IMR_ROK, + .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER), + + .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M, + .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M, + .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M, + .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M, + .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M, + .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M, + .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M, + .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M, + .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M, + .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M, + .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M, + .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M, + + .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7, + .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15, +}; + +static DEFINE_PCI_DEVICE_TABLE(rtl88ee_pci_ids) = { + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8179, rtl88ee_hal_cfg)}, + {}, +}; + +MODULE_DEVICE_TABLE(pci, rtl88ee_pci_ids); + +MODULE_AUTHOR("zhiyuan_yang <zhiyuan_yang@realsil.com.cn>"); +MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>"); +MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Realtek 8188E 802.11n PCI wireless"); +MODULE_FIRMWARE("rtlwifi/rtl8188efw.bin"); + +module_param_named(swenc, rtl88ee_mod_params.sw_crypto, bool, 0444); +module_param_named(debug, rtl88ee_mod_params.debug, int, 0444); +module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444); +module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444); +module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444); +MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); +MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); +MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n"); +MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n"); +MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)"); + +static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); + +static struct pci_driver rtl88ee_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl88ee_pci_ids, + .probe = rtl_pci_probe, + .remove = rtl_pci_disconnect, + .driver.pm = &rtlwifi_pm_ops, +}; + +module_pci_driver(rtl88ee_driver); |