diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8187_dev.c')
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_dev.c | 47 |
1 files changed, 30 insertions, 17 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 87a95588a8e..2017ccc0014 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -32,6 +32,7 @@ #ifdef CONFIG_RTL8187_LEDS #include "rtl8187_leds.h" #endif +#include "rtl8187_rfkill.h" MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); @@ -220,7 +221,7 @@ static void rtl8187_tx_cb(struct urb *urb) * reading a register in the device. We are in interrupt mode * here, thus queue the skb and finish on a work queue. */ skb_queue_tail(&priv->b_tx_status.queue, skb); - queue_delayed_work(hw->workqueue, &priv->work, 0); + ieee80211_queue_delayed_work(hw, &priv->work, 0); } } @@ -380,7 +381,8 @@ static void rtl8187_rx_cb(struct urb *urb) rx_status.flag |= RX_FLAG_TSFT; if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; - ieee80211_rx_irqsafe(dev, skb, &rx_status); + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(dev, skb); skb = dev_alloc_skb(RTL8187_MAX_RX); if (unlikely(!skb)) { @@ -647,10 +649,10 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev) /* setup card */ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); - rtl818x_iowrite8(priv, &priv->map->GPIO, 1); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 1); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); @@ -673,11 +675,11 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev) /* host_usb_init */ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); reg = rtl818x_ioread8(priv, (u8 *)0xFE53); rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7)); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80); @@ -909,12 +911,12 @@ static int rtl8187_start(struct ieee80211_hw *dev) u32 reg; int ret; + mutex_lock(&priv->conf_mutex); + ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) : rtl8187b_init_hw(dev); if (ret) - return ret; - - mutex_lock(&priv->conf_mutex); + goto rtl8187_start_exit; init_usb_anchor(&priv->anchored); priv->dev = dev; @@ -941,8 +943,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); rtl8187b_init_status_urb(dev); - mutex_unlock(&priv->conf_mutex); - return 0; + goto rtl8187_start_exit; } rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); @@ -986,9 +987,10 @@ static int rtl8187_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_RX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); INIT_DELAYED_WORK(&priv->work, rtl8187_work); - mutex_unlock(&priv->conf_mutex); - return 0; +rtl8187_start_exit: + mutex_unlock(&priv->conf_mutex); + return ret; } static void rtl8187_stop(struct ieee80211_hw *dev) @@ -1016,9 +1018,10 @@ static void rtl8187_stop(struct ieee80211_hw *dev) dev_kfree_skb_any(skb); usb_kill_anchored_urbs(&priv->anchored); + mutex_unlock(&priv->conf_mutex); + if (!priv->is_rtl8187b) cancel_delayed_work_sync(&priv->work); - mutex_unlock(&priv->conf_mutex); } static int rtl8187_add_interface(struct ieee80211_hw *dev, @@ -1197,10 +1200,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, info->use_short_preamble); } +static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev, + int mc_count, struct dev_addr_list *mc_list) +{ + return mc_count; +} + static void rtl8187_configure_filter(struct ieee80211_hw *dev, unsigned int changed_flags, unsigned int *total_flags, - int mc_count, struct dev_addr_list *mclist) + u64 multicast) { struct rtl8187_priv *priv = dev->priv; @@ -1210,7 +1219,7 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, priv->rx_conf ^= RTL818X_RX_CONF_CTRL; if (changed_flags & FIF_OTHER_BSS) priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; - if (*total_flags & FIF_ALLMULTI || mc_count > 0) + if (*total_flags & FIF_ALLMULTI || multicast > 0) priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; else priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; @@ -1273,8 +1282,10 @@ static const struct ieee80211_ops rtl8187_ops = { .remove_interface = rtl8187_remove_interface, .config = rtl8187_config, .bss_info_changed = rtl8187_bss_info_changed, + .prepare_multicast = rtl8187_prepare_multicast, .configure_filter = rtl8187_configure_filter, - .conf_tx = rtl8187_conf_tx + .conf_tx = rtl8187_conf_tx, + .rfkill_poll = rtl8187_rfkill_poll }; static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) @@ -1514,6 +1525,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, reg &= 0xFF; rtl8187_leds_init(dev, reg); #endif + rtl8187_rfkill_init(dev); return 0; @@ -1537,6 +1549,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) #ifdef CONFIG_RTL8187_LEDS rtl8187_leds_exit(dev); #endif + rtl8187_rfkill_exit(dev); ieee80211_unregister_hw(dev); priv = dev->priv; |