diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.h | 468 |
1 files changed, 468 insertions, 0 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h new file mode 100644 index 00000000000..7027c9f47d3 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -0,0 +1,468 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00 + Abstract: rt2x00 queue datastructures and routines + */ + +#ifndef RT2X00QUEUE_H +#define RT2X00QUEUE_H + +#include <linux/prefetch.h> + +/** + * DOC: Entrie frame size + * + * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes, + * for USB devices this restriction does not apply, but the value of + * 2432 makes sense since it is big enough to contain the maximum fragment + * size according to the ieee802.11 specs. + */ +#define DATA_FRAME_SIZE 2432 +#define MGMT_FRAME_SIZE 256 + +/** + * DOC: Number of entries per queue + * + * After research it was concluded that 12 entries in a RX and TX + * queue would be sufficient. Although this is almost one third of + * the amount the legacy driver allocated, the queues aren't getting + * filled to the maximum even when working with the maximum rate. + */ +#define RX_ENTRIES 12 +#define TX_ENTRIES 12 +#define BEACON_ENTRIES 1 +#define ATIM_ENTRIES 1 + +/** + * enum data_queue_qid: Queue identification + */ +enum data_queue_qid { + QID_AC_BE = 0, + QID_AC_BK = 1, + QID_AC_VI = 2, + QID_AC_VO = 3, + QID_HCCA = 4, + QID_MGMT = 13, + QID_RX = 14, + QID_OTHER = 15, +}; + +/** + * enum rt2x00_bcn_queue: Beacon queue index + * + * Start counting with a high offset, this because this enumeration + * supplements &enum ieee80211_tx_queue and we should prevent value + * conflicts. + * + * @RT2X00_BCN_QUEUE_BEACON: Beacon queue + * @RT2X00_BCN_QUEUE_ATIM: Atim queue (sends frame after beacon) + */ +enum rt2x00_bcn_queue { + RT2X00_BCN_QUEUE_BEACON = 100, + RT2X00_BCN_QUEUE_ATIM = 101, +}; + +/** + * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc + * + * @FRAME_DESC_DRIVER_GENERATED: Frame was generated inside driver + * and should not be reported back to mac80211 during txdone. + */ +enum skb_frame_desc_flags { + FRAME_DESC_DRIVER_GENERATED = 1 << 0, +}; + +/** + * struct skb_frame_desc: Descriptor information for the skb buffer + * + * This structure is placed over the skb->cb array, this means that + * this structure should not exceed the size of that array (48 bytes). + * + * @flags: Frame flags, see &enum skb_frame_desc_flags. + * @frame_type: Frame type, see &enum rt2x00_dump_type. + * @data: Pointer to data part of frame (Start of ieee80211 header). + * @desc: Pointer to descriptor part of the frame. + * Note that this pointer could point to something outside + * of the scope of the skb->data pointer. + * @data_len: Length of the frame data. + * @desc_len: Length of the frame descriptor. + + * @entry: The entry to which this sk buffer belongs. + */ +struct skb_frame_desc { + unsigned int flags; + + unsigned int frame_type; + + void *data; + void *desc; + + unsigned int data_len; + unsigned int desc_len; + + struct queue_entry *entry; +}; + +static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(struct skb_frame_desc) > sizeof(skb->cb)); + return (struct skb_frame_desc *)&skb->cb[0]; +} + +/** + * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc + * + * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value, + * or does it contain the bitrate itself. + * @RXDONE_MY_BSS: Does this frame originate from device's BSS. + */ +enum rxdone_entry_desc_flags { + RXDONE_SIGNAL_PLCP = 1 << 0, + RXDONE_MY_BSS = 1 << 1, +}; + +/** + * struct rxdone_entry_desc: RX Entry descriptor + * + * Summary of information that has been read from the RX frame descriptor. + * + * @signal: Signal of the received frame. + * @rssi: RSSI of the received frame. + * @size: Data size of the received frame. + * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). + * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). + + */ +struct rxdone_entry_desc { + int signal; + int rssi; + int size; + int flags; + int dev_flags; +}; + +/** + * struct txdone_entry_desc: TX done entry descriptor + * + * Summary of information that has been read from the TX frame descriptor + * after the device is done with transmission. + * + * @control: Control structure which was used to transmit the frame. + * @status: TX status (See &enum tx_status). + * @retry: Retry count. + */ +struct txdone_entry_desc { + struct ieee80211_tx_control *control; + int status; + int retry; +}; + +/** + * enum txentry_desc_flags: Status flags for TX entry descriptor + * + * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. + * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. + * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. + * @ENTRY_TXD_BURST: This frame belongs to the same burst event. + * @ENTRY_TXD_ACK: An ACK is required for this frame. + */ +enum txentry_desc_flags { + ENTRY_TXD_RTS_FRAME, + ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_MORE_FRAG, + ENTRY_TXD_REQ_TIMESTAMP, + ENTRY_TXD_BURST, + ENTRY_TXD_ACK, +}; + +/** + * struct txentry_desc: TX Entry descriptor + * + * Summary of information for the frame descriptor before sending a TX frame. + * + * @flags: Descriptor flags (See &enum queue_entry_flags). + * @queue: Queue identification (See &enum data_queue_qid). + * @length_high: PLCP length high word. + * @length_low: PLCP length low word. + * @signal: PLCP signal. + * @service: PLCP service. + * @aifs: AIFS value. + * @ifs: IFS value. + * @cw_min: cwmin value. + * @cw_max: cwmax value. + */ +struct txentry_desc { + unsigned long flags; + + enum data_queue_qid queue; + + u16 length_high; + u16 length_low; + u16 signal; + u16 service; + + int aifs; + int ifs; + int cw_min; + int cw_max; +}; + +/** + * enum queue_entry_flags: Status flags for queue entry + * + * @ENTRY_BCN_ASSIGNED: This entry has been assigned to an interface. + * As long as this bit is set, this entry may only be touched + * through the interface structure. + * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data + * transfer (either TX or RX depending on the queue). The entry should + * only be touched after the device has signaled it is done with it. + * @ENTRY_OWNER_DEVICE_CRYPTO: This entry is owned by the device for data + * encryption or decryption. The entry should only be touched after + * the device has signaled it is done with it. + */ + +enum queue_entry_flags { + ENTRY_BCN_ASSIGNED, + ENTRY_OWNER_DEVICE_DATA, + ENTRY_OWNER_DEVICE_CRYPTO, +}; + +/** + * struct queue_entry: Entry inside the &struct data_queue + * + * @flags: Entry flags, see &enum queue_entry_flags. + * @queue: The data queue (&struct data_queue) to which this entry belongs. + * @skb: The buffer which is currently being transmitted (for TX queue), + * or used to directly recieve data in (for RX queue). + * @entry_idx: The entry index number. + * @priv_data: Private data belonging to this queue entry. The pointer + * points to data specific to a particular driver and queue type. + */ +struct queue_entry { + unsigned long flags; + + struct data_queue *queue; + + struct sk_buff *skb; + + unsigned int entry_idx; + + void *priv_data; +}; + +/** + * enum queue_index: Queue index type + * + * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is + * owned by the hardware then the queue is considered to be full. + * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by + * the hardware and for which we need to run the txdone handler. If this + * entry is not owned by the hardware the queue is considered to be empty. + * @Q_INDEX_CRYPTO: Index pointer to the next entry which encryption/decription + * will be completed by the hardware next. + * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size + * of the index array. + */ +enum queue_index { + Q_INDEX, + Q_INDEX_DONE, + Q_INDEX_CRYPTO, + Q_INDEX_MAX, +}; + +/** + * struct data_queue: Data queue + * + * @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to. + * @entries: Base address of the &struct queue_entry which are + * part of this queue. + * @qid: The queue identification, see &enum data_queue_qid. + * @lock: Spinlock to protect index handling. Whenever @index, @index_done or + * @index_crypt needs to be changed this lock should be grabbed to prevent + * index corruption due to concurrency. + * @count: Number of frames handled in the queue. + * @limit: Maximum number of entries in the queue. + * @length: Number of frames in queue. + * @index: Index pointers to entry positions in the queue, + * use &enum queue_index to get a specific index field. + * @aifs: The aifs value for outgoing frames (field ignored in RX queue). + * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). + * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). + * @data_size: Maximum data size for the frames in this queue. + * @desc_size: Hardware descriptor size for the data in this queue. + */ +struct data_queue { + struct rt2x00_dev *rt2x00dev; + struct queue_entry *entries; + + enum data_queue_qid qid; + + spinlock_t lock; + unsigned int count; + unsigned short limit; + unsigned short length; + unsigned short index[Q_INDEX_MAX]; + + unsigned short aifs; + unsigned short cw_min; + unsigned short cw_max; + + unsigned short data_size; + unsigned short desc_size; +}; + +/** + * struct data_queue_desc: Data queue description + * + * The information in this structure is used by drivers + * to inform rt2x00lib about the creation of the data queue. + * + * @entry_num: Maximum number of entries for a queue. + * @data_size: Maximum data size for the frames in this queue. + * @desc_size: Hardware descriptor size for the data in this queue. + * @priv_size: Size of per-queue_entry private data. + */ +struct data_queue_desc { + unsigned short entry_num; + unsigned short data_size; + unsigned short desc_size; + unsigned short priv_size; +}; + +/** + * queue_end - Return pointer to the last queue (HELPER MACRO). + * @__dev: Pointer to &struct rt2x00_dev + * + * Using the base rx pointer and the maximum number of available queues, + * this macro will return the address of 1 position beyond the end of the + * queues array. + */ +#define queue_end(__dev) \ + &(__dev)->rx[(__dev)->data_queues] + +/** + * tx_queue_end - Return pointer to the last TX queue (HELPER MACRO). + * @__dev: Pointer to &struct rt2x00_dev + * + * Using the base tx pointer and the maximum number of available TX + * queues, this macro will return the address of 1 position beyond + * the end of the TX queue array. + */ +#define tx_queue_end(__dev) \ + &(__dev)->tx[(__dev)->hw->queues] + +/** + * queue_loop - Loop through the queues within a specific range (HELPER MACRO). + * @__entry: Pointer where the current queue entry will be stored in. + * @__start: Start queue pointer. + * @__end: End queue pointer. + * + * This macro will loop through all queues between &__start and &__end. + */ +#define queue_loop(__entry, __start, __end) \ + for ((__entry) = (__start); \ + prefetch(&(__entry)[1]), (__entry) != (__end); \ + (__entry) = &(__entry)[1]) + +/** + * queue_for_each - Loop through all queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all available queues. + */ +#define queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->rx, queue_end(__dev)) + +/** + * tx_queue_for_each - Loop through the TX queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all TX related queues excluding + * the Beacon and Atim queues. + */ +#define tx_queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->tx, tx_queue_end(__dev)) + +/** + * txall_queue_for_each - Loop through all TX related queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all TX related queues including + * the Beacon and Atim queues. + */ +#define txall_queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->tx, queue_end(__dev)) + +/** + * rt2x00queue_empty - Check if the queue is empty. + * @queue: Queue to check if empty. + */ +static inline int rt2x00queue_empty(struct data_queue *queue) +{ + return queue->length == 0; +} + +/** + * rt2x00queue_full - Check if the queue is full. + * @queue: Queue to check if full. + */ +static inline int rt2x00queue_full(struct data_queue *queue) +{ + return queue->length == queue->limit; +} + +/** + * rt2x00queue_free - Check the number of available entries in queue. + * @queue: Queue to check. + */ +static inline int rt2x00queue_available(struct data_queue *queue) +{ + return queue->limit - queue->length; +} + +/** + * rt2x00_desc_read - Read a word from the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be read. + * @value: Address where the descriptor value should be written into. + */ +static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) +{ + *value = le32_to_cpu(desc[word]); +} + +/** + * rt2x00_desc_write - wrote a word to the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be written. + * @value: Value that should be written into the descriptor. + */ +static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) +{ + desc[word] = cpu_to_le32(value); +} + +#endif /* RT2X00QUEUE_H */ |