aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2x00mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00mac.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c245
1 files changed, 169 insertions, 76 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index d0650738863..2c6cc5c374f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
struct ieee80211_tx_info *rts_info;
struct sk_buff *skb;
- int size;
+ unsigned int data_length;
+ int retval = 0;
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
- size = sizeof(struct ieee80211_cts);
+ data_length = sizeof(struct ieee80211_cts);
else
- size = sizeof(struct ieee80211_rts);
+ data_length = sizeof(struct ieee80211_rts);
- skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
- if (!skb) {
+ skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
+ if (unlikely(!skb)) {
WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
+ return -ENOMEM;
}
skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
- skb_put(skb, size);
+ skb_put(skb, data_length);
/*
* Copy TX information over from original frame to
@@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+ skb->do_not_encrypt = 1;
+
+ /*
+ * RTS/CTS frame should use the length of the frame plus any
+ * encryption overhead that will be added by the hardware.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (!frag_skb->do_not_encrypt)
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_cts *)(skb->data));
else
ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_rts *)(skb->data));
- if (rt2x00queue_write_tx_frame(queue, skb)) {
+ retval = rt2x00queue_write_tx_frame(queue, skb);
+ if (retval) {
dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
}
- return NETDEV_TX_OK;
+ return retval;
}
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
- ieee80211_stop_queues(hw);
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ goto exit_fail;
/*
* Determine which queue to put packet on.
@@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
!rt2x00dev->ops->hw->set_rts_threshold) {
- if (rt2x00queue_available(queue) <= 1) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
-
- if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
- }
+ if (rt2x00queue_available(queue) <= 1)
+ goto exit_fail;
- if (rt2x00queue_write_tx_frame(queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
+ if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
+ goto exit_fail;
}
+ if (rt2x00queue_write_tx_frame(queue, skb))
+ goto exit_fail;
+
if (rt2x00queue_threshold(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_OK;
+
+ exit_fail:
+ ieee80211_stop_queue(rt2x00dev->hw, qid);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
@@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
return rt2x00lib_start(rt2x00dev);
@@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return;
rt2x00lib_stop(rt2x00dev);
@@ -199,12 +206,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
* Don't allow interfaces to be added
* the device has disappeared.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
- !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return -ENODEV;
switch (conf->type) {
- case IEEE80211_IF_TYPE_AP:
+ case NL80211_IFTYPE_AP:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
@@ -220,8 +227,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
return -ENOBUFS;
break;
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
@@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
*/
for (i = 0; i < queue->limit; i++) {
entry = &queue->entries[i];
- if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
+ if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
break;
}
@@ -261,7 +268,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
* increase interface count and start initialization.
*/
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count++;
else
rt2x00dev->intf_sta_count++;
@@ -270,7 +277,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
spin_lock_init(&intf->seqlock);
intf->beacon = entry;
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
@@ -303,12 +310,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
* either the device has disappeared or when
* no interface is present.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
- (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) ||
- (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+ (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
return;
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count--;
else
rt2x00dev->intf_sta_count--;
@@ -317,59 +324,59 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
* Release beacon entry so it is available for
* new interfaces again.
*/
- __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
+ clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
/*
* Make sure the bssid and mac address registers
* are cleared to prevent false ACKing of frames.
*/
rt2x00lib_config_intf(rt2x00dev, intf,
- IEEE80211_IF_TYPE_INVALID, NULL, NULL);
+ NL80211_IFTYPE_UNSPECIFIED, NULL, NULL);
}
EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- int force_reconfig;
+ int radio_on;
+ int status;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
/*
- * Check if we need to disable the radio,
- * if this is not the case, at least the RX must be disabled.
+ * Only change device state when the radio is enabled. It does not
+ * matter what parameters we have configured when the radio is disabled
+ * because we won't be able to send or receive anyway. Also note that
+ * some configuration parameters (e.g. channel and antenna values) can
+ * only be set when the radio is enabled.
*/
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
- if (!conf->radio_enabled)
- rt2x00lib_disable_radio(rt2x00dev);
- else
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
- }
+ radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+ if (conf->radio_enabled) {
+ /* For programming the values, we have to turn RX off */
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
- /*
- * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
- * been started and the configuration must be forced upon the hardware.
- * Otherwise registers will not be intialized correctly and could
- * result in non-working hardware because essential registers aren't
- * initialized.
- */
- force_reconfig =
- __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+ /* Enable the radio */
+ status = rt2x00lib_enable_radio(rt2x00dev);
+ if (unlikely(status))
+ return status;
- rt2x00lib_config(rt2x00dev, conf, force_reconfig);
+ /*
+ * When we've just turned on the radio, we want to reprogram
+ * everything to ensure a consistent state
+ */
+ rt2x00lib_config(rt2x00dev, conf, !radio_on);
- /*
- * Reenable RX only if the radio should be on.
- */
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ /* Turn RX back on */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
- else if (conf->radio_enabled)
- return rt2x00lib_enable_radio(rt2x00dev);
+ } else {
+ /* Disable the radio */
+ rt2x00lib_disable_radio(rt2x00dev);
+ }
return 0;
}
@@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
spin_lock(&intf->lock);
@@ -467,6 +474,91 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int (*set_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
+ struct rt2x00lib_crypto crypto;
+
+ if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ return -EOPNOTSUPP;
+ else if (key->keylen > 32)
+ return -ENOSPC;
+
+ memset(&crypto, 0, sizeof(crypto));
+
+ /*
+ * When in STA mode, bssidx is always 0 otherwise local_address[5]
+ * contains the bss number, see BSS_ID_MASK comments for details.
+ */
+ if (rt2x00dev->intf_sta_count)
+ crypto.bssidx = 0;
+ else
+ crypto.bssidx =
+ local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+ crypto.cipher = rt2x00crypto_key_to_cipher(key);
+ if (crypto.cipher == CIPHER_NONE)
+ return -EOPNOTSUPP;
+
+ crypto.cmd = cmd;
+ crypto.address = address;
+
+ if (crypto.cipher == CIPHER_TKIP) {
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+ memcpy(&crypto.key,
+ &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+ sizeof(crypto.key));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+ memcpy(&crypto.tx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+ sizeof(crypto.tx_mic));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+ memcpy(&crypto.rx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+ sizeof(crypto.rx_mic));
+ } else
+ memcpy(&crypto.key, &key->key[0], key->keylen);
+
+ /*
+ * Each BSS has a maximum of 4 shared keys.
+ * Shared key index values:
+ * 0) BSS0 key0
+ * 1) BSS0 key1
+ * ...
+ * 4) BSS1 key0
+ * ...
+ * 8) BSS2 key0
+ * ...
+ * Both pairwise as shared key indeces are determined by
+ * driver. This is required because the hardware requires
+ * keys to be assigned in correct order (When key 1 is
+ * provided but key 0 is not, then the key is not found
+ * by the hardware during RX).
+ */
+ if (cmd == SET_KEY)
+ key->hw_key_idx = 0;
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ set_key = rt2x00dev->ops->lib->config_pairwise_key;
+ else
+ set_key = rt2x00dev->ops->lib->config_shared_key;
+
+ if (!set_key)
+ return -EOPNOTSUPP;
+
+ return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
@@ -575,10 +667,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
queue->cw_max = 10; /* cw_min: 2^10 = 1024. */
queue->aifs = params->aifs;
+ queue->txop = params->txop;
INFO(rt2x00dev,
- "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
- queue_idx, queue->cw_min, queue->cw_max, queue->aifs);
+ "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n",
+ queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop);
return 0;
}