diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 293 |
1 files changed, 101 insertions, 192 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 0f8b84b7224..5a2dfe87c6b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -28,7 +28,6 @@ Supported chipsets: RT2800U. */ -#include <linux/crc-ccitt.h> #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/init.h> @@ -45,7 +44,7 @@ /* * Allow hardware encryption to be disabled. */ -static int modparam_nohwcrypt = 1; +static int modparam_nohwcrypt = 0; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); @@ -57,84 +56,10 @@ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) return FIRMWARE_RT2870; } -static bool rt2800usb_check_crc(const u8 *data, const size_t len) -{ - u16 fw_crc; - u16 crc; - - /* - * The last 2 bytes in the firmware array are the crc checksum itself, - * this means that we should never pass those 2 bytes to the crc - * algorithm. - */ - fw_crc = (data[len - 2] << 8 | data[len - 1]); - - /* - * Use the crc ccitt algorithm. - * This will return the same value as the legacy driver which - * used bit ordering reversion on the both the firmware bytes - * before input input as well as on the final output. - * Obviously using crc ccitt directly is much more efficient. - */ - crc = crc_ccitt(~0, data, len - 2); - - /* - * There is a small difference between the crc-itu-t + bitrev and - * the crc-ccitt crc calculation. In the latter method the 2 bytes - * will be swapped, use swab16 to convert the crc to the correct - * value. - */ - crc = swab16(crc); - - return fw_crc == crc; -} - -static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, +static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { - size_t offset = 0; - - /* - * Firmware files: - * There are 2 variations of the rt2870 firmware. - * a) size: 4kb - * b) size: 8kb - * Note that (b) contains 2 separate firmware blobs of 4k - * within the file. The first blob is the same firmware as (a), - * but the second blob is for the additional chipsets. - */ - if (len != 4096 && len != 8192) - return FW_BAD_LENGTH; - - /* - * Check if we need the upper 4kb firmware data or not. - */ - if ((len == 4096) && - !rt2x00_rt(rt2x00dev, RT2860) && - !rt2x00_rt(rt2x00dev, RT2872) && - !rt2x00_rt(rt2x00dev, RT3070)) - return FW_BAD_VERSION; - - /* - * 8kb firmware files must be checked as if it were - * 2 separate firmware files. - */ - while (offset < len) { - if (!rt2800usb_check_crc(data + offset, 4096)) - return FW_BAD_CRC; - - offset += 4096; - } - - return FW_OK; -} - -static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - unsigned int i; int status; - u32 reg; u32 offset; u32 length; @@ -152,28 +77,10 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, } /* - * Wait for stable hardware. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - /* * Write firmware to device. */ - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE, - data + offset, length, - REGISTER_TIMEOUT32(length)); + rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + data + offset, length); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); @@ -196,7 +103,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Send signal to firmware during boot time. */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071) || @@ -206,28 +113,6 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, udelay(10); } - /* - * Wait for device to stabilize. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "PBF system register not ready.\n"); - return -EBUSY; - } - - /* - * Initialize firmware. - */ - rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - return 0; } @@ -246,6 +131,44 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } +static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i; + + /* + * Wait until BBP and RF are ready. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_RESET, REGISTER_TIMEOUT); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + return 0; +} + static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -371,7 +294,9 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt2800usb_toggle_rx(rt2x00dev, state); break; case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_ON_ISR: case STATE_RADIO_IRQ_OFF: + case STATE_RADIO_IRQ_OFF_ISR: /* No support, but no error either */ break; case STATE_DEEP_SLEEP: @@ -395,25 +320,29 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ +static void rt2800usb_write_tx_data(struct queue_entry* entry, + struct txentry_desc *txdesc) +{ + __le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); + + rt2800_write_txwi(txwi, txdesc); +} + + static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txi = (__le32 *)(skb->data - TXWI_DESC_SIZE - TXINFO_DESC_SIZE); + __le32 *txi = (__le32 *) skb->data; u32 word; /* - * Initialize TXWI descriptor - */ - rt2800_write_txwi(skb, txdesc); - - /* * Initialize TXINFO descriptor */ rt2x00_desc_read(txi, 0, &word); rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, - skb->len + TXWI_DESC_SIZE); + skb->len - TXINFO_DESC_SIZE); rt2x00_set_field32(&word, TXINFO_W0_WIV, !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); @@ -426,6 +355,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * Register descriptor details in skb frame descriptor. */ + skbdesc->flags |= SKBDESC_DESC_IN_SKB; skbdesc->desc = txi; skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; } @@ -433,51 +363,6 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ -static void rt2800usb_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - unsigned int beacon_base; - u32 reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - /* - * Add the TXWI for the beacon to the skb. - */ - rt2800_write_txwi(entry->skb, txdesc); - skb_push(entry->skb, TXWI_DESC_SIZE); - - /* - * Write entire beacon with descriptor to register. - */ - beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); - - /* - * Enable beaconing again. - */ - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - /* - * Clean up the beacon skb. - */ - dev_kfree_skb(entry->skb); - entry->skb = NULL; -} - static int rt2800usb_get_tx_data_len(struct queue_entry *entry) { int length; @@ -568,7 +453,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Process the RXWI structure. */ - rt2800_process_rxwi(entry->skb, rxdesc); + rt2800_process_rxwi(entry, rxdesc); } /* @@ -585,24 +470,10 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static const struct rt2800_ops rt2800usb_rt2800_ops = { - .register_read = rt2x00usb_register_read, - .register_read_lock = rt2x00usb_register_read_lock, - .register_write = rt2x00usb_register_write, - .register_write_lock = rt2x00usb_register_write_lock, - - .register_multiread = rt2x00usb_register_multiread, - .register_multiwrite = rt2x00usb_register_multiwrite, - - .regbusy_read = rt2x00usb_regbusy_read, -}; - static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; - rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops; - /* * Allocate eeprom data. */ @@ -635,6 +506,8 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); + __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags); /* * Set the rssi offset. @@ -644,11 +517,45 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } +static const struct ieee80211_ops rt2800usb_mac80211_ops = { + .tx = rt2x00mac_tx, + .start = rt2x00mac_start, + .stop = rt2x00mac_stop, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .configure_filter = rt2x00mac_configure_filter, + .set_tim = rt2x00mac_set_tim, + .set_key = rt2x00mac_set_key, + .sw_scan_start = rt2x00mac_sw_scan_start, + .sw_scan_complete = rt2x00mac_sw_scan_complete, + .get_stats = rt2x00mac_get_stats, + .get_tkip_seq = rt2800_get_tkip_seq, + .set_rts_threshold = rt2800_set_rts_threshold, + .bss_info_changed = rt2x00mac_bss_info_changed, + .conf_tx = rt2800_conf_tx, + .get_tsf = rt2800_get_tsf, + .rfkill_poll = rt2x00mac_rfkill_poll, + .ampdu_action = rt2800_ampdu_action, +}; + +static const struct rt2800_ops rt2800usb_rt2800_ops = { + .register_read = rt2x00usb_register_read, + .register_read_lock = rt2x00usb_register_read_lock, + .register_write = rt2x00usb_register_write, + .register_write_lock = rt2x00usb_register_write_lock, + .register_multiread = rt2x00usb_register_multiread, + .register_multiwrite = rt2x00usb_register_multiwrite, + .regbusy_read = rt2x00usb_regbusy_read, + .drv_write_firmware = rt2800usb_write_firmware, + .drv_init_registers = rt2800usb_init_registers, +}; + static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .probe_hw = rt2800usb_probe_hw, .get_firmware_name = rt2800usb_get_firmware_name, - .check_firmware = rt2800usb_check_firmware, - .load_firmware = rt2800usb_load_firmware, + .check_firmware = rt2800_check_firmware, + .load_firmware = rt2800_load_firmware, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, @@ -657,9 +564,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, + .watchdog = rt2x00usb_watchdog, .write_tx_desc = rt2800usb_write_tx_desc, - .write_tx_data = rt2x00usb_write_tx_data, - .write_beacon = rt2800usb_write_beacon, + .write_tx_data = rt2800usb_write_tx_data, + .write_beacon = rt2800_write_beacon, .get_tx_data_len = rt2800usb_get_tx_data_len, .kick_tx_queue = rt2x00usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, @@ -706,7 +614,8 @@ static const struct rt2x00_ops rt2800usb_ops = { .tx = &rt2800usb_queue_tx, .bcn = &rt2800usb_queue_bcn, .lib = &rt2800usb_rt2x00_ops, - .hw = &rt2800_mac80211_ops, + .drv = &rt2800usb_rt2800_ops, + .hw = &rt2800usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |