aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800lib.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800lib.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c369
1 files changed, 266 insertions, 103 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index dbf74d07d94..2a6aa85cc6c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -687,6 +687,9 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status)
mcs = real_mcs;
}
+ if (aggr == 1 || ampdu == 1)
+ __set_bit(TXDONE_AMPDU, &txdesc.flags);
+
/*
* Ralink has a retry mechanism using a global fallback
* table. We setup this fallback table to try the immediate
@@ -727,34 +730,20 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
struct data_queue *queue;
struct queue_entry *entry;
u32 reg;
- u8 pid;
- int i;
+ u8 qid;
- /*
- * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
- * at most X times and also stop processing once the TX_STA_FIFO_VALID
- * flag is not set anymore.
- *
- * The legacy drivers use X=TX_RING_SIZE but state in a comment
- * that the TX_STA_FIFO stack has a size of 16. We stick to our
- * tx ring size for now.
- */
- for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
- rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
- if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
- break;
+ while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
- /*
- * Skip this entry when it contains an invalid
- * queue identication number.
+ /* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus
+ * qid is guaranteed to be one of the TX QIDs
*/
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
- if (pid >= QID_RX)
- continue;
-
- queue = rt2x00queue_get_tx_queue(rt2x00dev, pid);
- if (unlikely(!queue))
+ qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
+ queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
+ if (unlikely(!queue)) {
+ WARNING(rt2x00dev, "Got TX status for an unavailable "
+ "queue %u, dropping\n", qid);
continue;
+ }
/*
* Inside each queue, we process each entry in a chronological
@@ -946,25 +935,49 @@ static void rt2800_brightness_set(struct led_classdev *led_cdev,
unsigned int ledmode =
rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
EEPROM_FREQ_LED_MODE);
+ u32 reg;
- if (led->type == LED_TYPE_RADIO) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? 0x20 : 0);
- } else if (led->type == LED_TYPE_ASSOC) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
- } else if (led->type == LED_TYPE_QUALITY) {
- /*
- * The brightness is divided into 6 levels (0 - 5),
- * The specs tell us the following levels:
- * 0, 1 ,3, 7, 15, 31
- * to determine the level in a simple way we can simply
- * work with bitshifting:
- * (1 << level) - 1
- */
- rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
- (1 << brightness / (LED_FULL / 6)) - 1,
- polarity);
+ /* Check for SoC (SOC devices don't support MCU requests) */
+ if (rt2x00_is_soc(led->rt2x00dev)) {
+ rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
+
+ /* Set LED Polarity */
+ rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
+
+ /* Set LED Mode */
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
+ enabled ? 3 : 0);
+ }
+
+ rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+
+ } else {
+ if (led->type == LED_TYPE_RADIO) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? 0x20 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * The specs tell us the following levels:
+ * 0, 1 ,3, 7, 15, 31
+ * to determine the level in a simple way we can simply
+ * work with bitshifting:
+ * (1 << level) - 1
+ */
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ (1 << brightness / (LED_FULL / 6)) - 1,
+ polarity);
+ }
}
}
@@ -1218,6 +1231,25 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ if (conf->sync == TSF_SYNC_AP_NONE) {
+ /*
+ * Tune beacon queue transmit parameters for AP mode
+ */
+ rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 0);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 1);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
+ rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
+ } else {
+ rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 4);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 2);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
+ rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
+ rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
+ }
}
if (flags & CONFIG_UPDATE_MAC) {
@@ -1608,7 +1640,6 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
struct channel_info *info)
{
u8 rfcsr;
- u16 eeprom;
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
@@ -1638,11 +1669,10 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
if (rf->channel <= 14) {
int idx = rf->channel-1;
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
/* r55/r59 value array of channel 1~14 */
static const char r55_bt_rev[] = {0x83, 0x83,
@@ -1721,7 +1751,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2x00_rf(rt2x00dev, RF3052) ||
rt2x00_rf(rt2x00dev, RF3320))
rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
- else if (rt2x00_rf(rt2x00dev, RF5390))
+ else if (rt2x00_rf(rt2x00dev, RF5370) ||
+ rt2x00_rf(rt2x00dev, RF5390))
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
else
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
@@ -1736,8 +1767,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
if (rf->channel <= 14) {
if (!rt2x00_rt(rt2x00dev, RT5390)) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG,
- &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
+ &rt2x00dev->cap_flags)) {
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
} else {
@@ -1748,7 +1779,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
} else {
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
rt2800_bbp_write(rt2x00dev, 75, 0x46);
else
rt2800_bbp_write(rt2x00dev, 75, 0x50);
@@ -1813,17 +1844,131 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
}
+static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
+{
+ u8 tssi_bounds[9];
+ u8 current_tssi;
+ u16 eeprom;
+ u8 step;
+ int i;
+
+ /*
+ * Read TSSI boundaries for temperature compensation from
+ * the EEPROM.
+ *
+ * Array idx 0 1 2 3 4 5 6 7 8
+ * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4
+ * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
+ */
+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
+ tssi_bounds[0] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG1_MINUS4);
+ tssi_bounds[1] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG1_MINUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom);
+ tssi_bounds[2] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG2_MINUS2);
+ tssi_bounds[3] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG2_MINUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom);
+ tssi_bounds[4] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG3_REF);
+ tssi_bounds[5] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG3_PLUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom);
+ tssi_bounds[6] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG4_PLUS2);
+ tssi_bounds[7] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG4_PLUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom);
+ tssi_bounds[8] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG5_PLUS4);
+
+ step = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG5_AGC_STEP);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom);
+ tssi_bounds[0] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A1_MINUS4);
+ tssi_bounds[1] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A1_MINUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom);
+ tssi_bounds[2] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A2_MINUS2);
+ tssi_bounds[3] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A2_MINUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom);
+ tssi_bounds[4] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A3_REF);
+ tssi_bounds[5] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A3_PLUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom);
+ tssi_bounds[6] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A4_PLUS2);
+ tssi_bounds[7] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A4_PLUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom);
+ tssi_bounds[8] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A5_PLUS4);
+
+ step = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A5_AGC_STEP);
+ }
+
+ /*
+ * Check if temperature compensation is supported.
+ */
+ if (tssi_bounds[4] == 0xff)
+ return 0;
+
+ /*
+ * Read current TSSI (BBP 49).
+ */
+ rt2800_bbp_read(rt2x00dev, 49, &current_tssi);
+
+ /*
+ * Compare TSSI value (BBP49) with the compensation boundaries
+ * from the EEPROM and increase or decrease tx power.
+ */
+ for (i = 0; i <= 3; i++) {
+ if (current_tssi > tssi_bounds[i])
+ break;
+ }
+
+ if (i == 4) {
+ for (i = 8; i >= 5; i--) {
+ if (current_tssi < tssi_bounds[i])
+ break;
+ }
+ }
+
+ return (i - 4) * step;
+}
+
static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
enum ieee80211_band band)
{
u16 eeprom;
u8 comp_en;
u8 comp_type;
- int comp_value;
+ int comp_value = 0;
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
- if (eeprom == 0xffff)
+ /*
+ * HT40 compensation not required.
+ */
+ if (eeprom == 0xffff ||
+ !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
return 0;
if (band == IEEE80211_BAND_2GHZ) {
@@ -1853,11 +1998,9 @@ static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
return comp_value;
}
-static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
- int is_rate_b,
- enum ieee80211_band band,
- int power_level,
- u8 txpower)
+static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
+ enum ieee80211_band band, int power_level,
+ u8 txpower, int delta)
{
u32 reg;
u16 eeprom;
@@ -1865,15 +2008,11 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
u8 eirp_txpower;
u8 eirp_txpower_criterion;
u8 reg_limit;
- int bw_comp = 0;
if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
return txpower;
- if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
- bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
-
- if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) {
/*
* Check if eirp txpower exceed txpower_limit.
* We use OFDM 6M as criterion and its eirp txpower
@@ -1895,18 +2034,19 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
EEPROM_EIRP_MAX_TX_POWER_5GHZ);
eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
- (is_rate_b ? 4 : 0) + bw_comp;
+ (is_rate_b ? 4 : 0) + delta;
reg_limit = (eirp_txpower > power_level) ?
(eirp_txpower - power_level) : 0;
} else
reg_limit = 0;
- return txpower + bw_comp - reg_limit;
+ return txpower + delta - reg_limit;
}
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf)
+ enum ieee80211_band band,
+ int power_level)
{
u8 txpower;
u16 eeprom;
@@ -1914,8 +2054,17 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
u32 reg;
u8 r1;
u32 offset;
- enum ieee80211_band band = conf->channel->band;
- int power_level = conf->power_level;
+ int delta;
+
+ /*
+ * Calculate HT40 compensation delta
+ */
+ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
+
+ /*
+ * calculate temperature compensation delta
+ */
+ delta += rt2800_get_gain_calibration_delta(rt2x00dev);
/*
* set to normal bbp tx power control mode: +/- 0dBm
@@ -1944,8 +2093,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
/*
@@ -1955,8 +2104,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
/*
@@ -1966,8 +2115,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
/*
@@ -1977,8 +2126,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
/* read the next four txpower values */
@@ -1993,8 +2142,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
/*
@@ -2004,8 +2153,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
/*
@@ -2015,8 +2164,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
/*
@@ -2026,8 +2175,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
rt2800_register_write(rt2x00dev, offset, reg);
@@ -2037,6 +2186,13 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
}
}
+void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band,
+ rt2x00dev->tx_power);
+}
+EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
+
static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
@@ -2090,10 +2246,12 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev,
if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
rt2800_config_channel(rt2x00dev, libconf->conf,
&libconf->rf, &libconf->channel);
- rt2800_config_txpower(rt2x00dev, libconf->conf);
+ rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+ libconf->conf->power_level);
}
if (flags & IEEE80211_CONF_CHANGE_POWER)
- rt2800_config_txpower(rt2x00dev, libconf->conf);
+ rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+ libconf->conf->power_level);
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
rt2800_config_retry_limit(rt2x00dev, libconf);
if (flags & IEEE80211_CONF_CHANGE_PS)
@@ -2254,7 +2412,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
} else if (rt2800_is_305x_soc(rt2x00dev)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000001f);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
} else if (rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
@@ -2758,8 +2916,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
ant = (div_mode == 3) ? 1 : 0;
/* check if this is a Bluetooth combo card */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
u32 reg;
rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
@@ -3155,8 +3312,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
- if (!test_bit(CONFIG_EXTERNAL_LNA_BG,
- &rt2x00dev->flags))
+ if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG,
+ &rt2x00dev->cap_flags))
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
@@ -3530,6 +3687,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
!rt2x00_rf(rt2x00dev, RF3022) &&
!rt2x00_rf(rt2x00dev, RF3052) &&
!rt2x00_rf(rt2x00dev, RF3320) &&
+ !rt2x00_rf(rt2x00dev, RF5370) &&
!rt2x00_rf(rt2x00dev, RF5390)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
@@ -3568,26 +3726,30 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
}
/*
- * Read frequency offset and RF programming sequence.
+ * Determine external LNA informations.
*/
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
- rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-
- /*
- * Read external LNA informations.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
- __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
- __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
/*
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+
+ /*
+ * Detect if this device has Bluetooth co-existence.
+ */
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
+ __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
+
+ /*
+ * Read frequency offset and RF programming sequence.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
/*
* Store led settings, for correct led behaviour.
@@ -3597,7 +3759,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
+ rt2x00dev->led_mcu_reg = eeprom;
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
@@ -3607,7 +3769,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
EIRP_MAX_TX_POWER_LIMIT)
- __set_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
return 0;
}
@@ -3828,6 +3990,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022) ||
rt2x00_rf(rt2x00dev, RF3320) ||
+ rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5390)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 15:11:57 +0000