aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2500pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500pci.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c48
1 files changed, 23 insertions, 25 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 408fcfc120f..52bbcf1bd17 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -440,8 +440,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
/*
* RT2525E and RT5222 need to flip TX I/Q
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
- rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
@@ -449,7 +448,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
/*
* RT2525E does not need RX I/Q Flip.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+ if (rt2x00_rf(rt2x00dev, RF2525E))
rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
} else {
rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
@@ -475,14 +474,14 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
* Switch on tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
- if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
+ if (!rt2x00_rf(rt2x00dev, RF2523))
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
/*
* For RT2525 we should first set the channel to half band higher.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ if (rt2x00_rf(rt2x00dev, RF2525)) {
static const u32 vals[] = {
0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
@@ -516,7 +515,7 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
* Switch off tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
- if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ if (!rt2x00_rf(rt2x00dev, RF2523)) {
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
}
@@ -640,7 +639,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
* up to version C the link tuning should halt after 20
* seconds while being associated.
*/
- if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
+ if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
rt2x00dev->intf_associated && count > 20)
return;
@@ -650,7 +649,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
* should go straight to dynamic CCA tuning when they
* are not associated.
*/
- if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
+ if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
!rt2x00dev->intf_associated)
goto dynamic_cca_tune;
@@ -1504,15 +1503,15 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
*/
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
- rt2x00_set_chip_rf(rt2x00dev, value, reg);
- rt2x00_print_chip(rt2x00dev);
-
- if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ rt2x00_set_chip(rt2x00dev, RT2560, value,
+ rt2x00_get_field32(reg, CSR0_REVISION));
+
+ if (!rt2x00_rf(rt2x00dev, RF2522) &&
+ !rt2x00_rf(rt2x00dev, RF2523) &&
+ !rt2x00_rf(rt2x00dev, RF2524) &&
+ !rt2x00_rf(rt2x00dev, RF2525) &&
+ !rt2x00_rf(rt2x00dev, RF2525E) &&
+ !rt2x00_rf(rt2x00dev, RF5222)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -1744,22 +1743,22 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+ if (rt2x00_rf(rt2x00dev, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->channels = rf_vals_bg_2522;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2523)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
spec->channels = rf_vals_bg_2523;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2524)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
spec->channels = rf_vals_bg_2524;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
spec->channels = rf_vals_bg_2525;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ } else if (rt2x00_rf(rt2x00dev, RF5222)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
@@ -1860,7 +1859,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
- .get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
.tx_last_beacon = rt2500pci_tx_last_beacon,
.rfkill_poll = rt2x00mac_rfkill_poll,
@@ -1941,7 +1939,7 @@ static const struct rt2x00_ops rt2500pci_ops = {
/*
* RT2500pci module information.
*/
-static struct pci_device_id rt2500pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
{ PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
{ 0, }
};