diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/sdio.h')
| -rw-r--r-- | drivers/net/wireless/mwifiex/sdio.h | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h new file mode 100644 index 00000000000..a0e9bc5253e --- /dev/null +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -0,0 +1,305 @@ +/* + * Marvell Wireless LAN device driver: SDIO specific definitions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_SDIO_H +#define _MWIFIEX_SDIO_H + + +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/card.h> + +#include "main.h" + +#define BLOCK_MODE 1 +#define BYTE_MODE 0 + +#define REG_PORT 0 +#define RD_BITMAP_L 0x04 +#define RD_BITMAP_U 0x05 +#define WR_BITMAP_L 0x06 +#define WR_BITMAP_U 0x07 +#define RD_LEN_P0_L 0x08 +#define RD_LEN_P0_U 0x09 + +#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff + +#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000 + +#define CTRL_PORT 0 +#define CTRL_PORT_MASK 0x0001 +#define DATA_PORT_MASK 0xfffe + +#define MAX_MP_REGS 64 +#define MAX_PORT 16 + +#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8 + +#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (4096) /* 4K */ + +/* Multi port RX aggregation buffer size */ +#define SDIO_MP_RX_AGGR_DEF_BUF_SIZE (4096) /* 4K */ + +/* Misc. Config Register : Auto Re-enable interrupts */ +#define AUTO_RE_ENABLE_INT BIT(4) + +/* Host Control Registers */ +/* Host Control Registers : I/O port 0 */ +#define IO_PORT_0_REG 0x78 +/* Host Control Registers : I/O port 1 */ +#define IO_PORT_1_REG 0x79 +/* Host Control Registers : I/O port 2 */ +#define IO_PORT_2_REG 0x7A + +/* Host Control Registers : Configuration */ +#define CONFIGURATION_REG 0x00 +/* Host Control Registers : Host without Command 53 finish host*/ +#define HOST_TO_CARD_EVENT (0x1U << 3) +/* Host Control Registers : Host without Command 53 finish host */ +#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2) +/* Host Control Registers : Host power up */ +#define HOST_POWER_UP (0x1U << 1) +/* Host Control Registers : Host power down */ +#define HOST_POWER_DOWN (0x1U << 0) + +/* Host Control Registers : Host interrupt mask */ +#define HOST_INT_MASK_REG 0x02 +/* Host Control Registers : Upload host interrupt mask */ +#define UP_LD_HOST_INT_MASK (0x1U) +/* Host Control Registers : Download host interrupt mask */ +#define DN_LD_HOST_INT_MASK (0x2U) +/* Enable Host interrupt mask */ +#define HOST_INT_ENABLE (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK) +/* Disable Host interrupt mask */ +#define HOST_INT_DISABLE 0xff + +/* Host Control Registers : Host interrupt status */ +#define HOST_INTSTATUS_REG 0x03 +/* Host Control Registers : Upload host interrupt status */ +#define UP_LD_HOST_INT_STATUS (0x1U) +/* Host Control Registers : Download host interrupt status */ +#define DN_LD_HOST_INT_STATUS (0x2U) + +/* Host Control Registers : Host interrupt RSR */ +#define HOST_INT_RSR_REG 0x01 +/* Host Control Registers : Upload host interrupt RSR */ +#define UP_LD_HOST_INT_RSR (0x1U) +#define SDIO_INT_MASK 0x3F + +/* Host Control Registers : Host interrupt status */ +#define HOST_INT_STATUS_REG 0x28 +/* Host Control Registers : Upload CRC error */ +#define UP_LD_CRC_ERR (0x1U << 2) +/* Host Control Registers : Upload restart */ +#define UP_LD_RESTART (0x1U << 1) +/* Host Control Registers : Download restart */ +#define DN_LD_RESTART (0x1U << 0) + +/* Card Control Registers : Card status register */ +#define CARD_STATUS_REG 0x30 +/* Card Control Registers : Card I/O ready */ +#define CARD_IO_READY (0x1U << 3) +/* Card Control Registers : CIS card ready */ +#define CIS_CARD_RDY (0x1U << 2) +/* Card Control Registers : Upload card ready */ +#define UP_LD_CARD_RDY (0x1U << 1) +/* Card Control Registers : Download card ready */ +#define DN_LD_CARD_RDY (0x1U << 0) + +/* Card Control Registers : Host interrupt mask register */ +#define HOST_INTERRUPT_MASK_REG 0x34 +/* Card Control Registers : Host power interrupt mask */ +#define HOST_POWER_INT_MASK (0x1U << 3) +/* Card Control Registers : Abort card interrupt mask */ +#define ABORT_CARD_INT_MASK (0x1U << 2) +/* Card Control Registers : Upload card interrupt mask */ +#define UP_LD_CARD_INT_MASK (0x1U << 1) +/* Card Control Registers : Download card interrupt mask */ +#define DN_LD_CARD_INT_MASK (0x1U << 0) + +/* Card Control Registers : Card interrupt status register */ +#define CARD_INTERRUPT_STATUS_REG 0x38 +/* Card Control Registers : Power up interrupt */ +#define POWER_UP_INT (0x1U << 4) +/* Card Control Registers : Power down interrupt */ +#define POWER_DOWN_INT (0x1U << 3) + +/* Card Control Registers : Card interrupt RSR register */ +#define CARD_INTERRUPT_RSR_REG 0x3c +/* Card Control Registers : Power up RSR */ +#define POWER_UP_RSR (0x1U << 4) +/* Card Control Registers : Power down RSR */ +#define POWER_DOWN_RSR (0x1U << 3) + +/* Card Control Registers : Miscellaneous Configuration Register */ +#define CARD_MISC_CFG_REG 0x6C + +/* Host F1 read base 0 */ +#define HOST_F1_RD_BASE_0 0x0040 +/* Host F1 read base 1 */ +#define HOST_F1_RD_BASE_1 0x0041 +/* Host F1 card ready */ +#define HOST_F1_CARD_RDY 0x0020 + +/* Firmware status 0 register */ +#define CARD_FW_STATUS0_REG 0x60 +/* Firmware status 1 register */ +#define CARD_FW_STATUS1_REG 0x61 +/* Rx length register */ +#define CARD_RX_LEN_REG 0x62 +/* Rx unit register */ +#define CARD_RX_UNIT_REG 0x63 + +/* Event header Len*/ +#define MWIFIEX_EVENT_HEADER_LEN 8 + +/* Max retry number of CMD53 write */ +#define MAX_WRITE_IOMEM_RETRY 2 + +/* SDIO Tx aggregation in progress ? */ +#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0) + +/* SDIO Tx aggregation buffer room for next packet ? */ +#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \ + <= a->mpa_tx.buf_size) + +/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */ +#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \ + memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \ + payload, pkt_len); \ + a->mpa_tx.buf_len += pkt_len; \ + if (!a->mpa_tx.pkt_cnt) \ + a->mpa_tx.start_port = port; \ + if (a->mpa_tx.start_port <= port) \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \ + else \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \ + a->mp_end_port))); \ + a->mpa_tx.pkt_cnt++; \ +} while (0); + +/* SDIO Tx aggregation limit ? */ +#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit) + +/* SDIO Tx aggregation port limit ? */ +#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port < \ + a->mpa_tx.start_port) && (((MAX_PORT - \ + a->mpa_tx.start_port) + a->curr_wr_port) >= \ + SDIO_MP_AGGR_DEF_PKT_LIMIT)) + +/* Reset SDIO Tx aggregation buffer parameters */ +#define MP_TX_AGGR_BUF_RESET(a) do { \ + a->mpa_tx.pkt_cnt = 0; \ + a->mpa_tx.buf_len = 0; \ + a->mpa_tx.ports = 0; \ + a->mpa_tx.start_port = 0; \ +} while (0); + +/* SDIO Rx aggregation limit ? */ +#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit) + +/* SDIO Tx aggregation port limit ? */ +#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port < \ + a->mpa_rx.start_port) && (((MAX_PORT - \ + a->mpa_rx.start_port) + a->curr_rd_port) >= \ + SDIO_MP_AGGR_DEF_PKT_LIMIT)) + +/* SDIO Rx aggregation in progress ? */ +#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0) + +/* SDIO Rx aggregation buffer room for next packet ? */ +#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \ + ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size) + +/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */ +#define MP_RX_AGGR_SETUP(a, skb, port) do { \ + a->mpa_rx.buf_len += skb->len; \ + if (!a->mpa_rx.pkt_cnt) \ + a->mpa_rx.start_port = port; \ + if (a->mpa_rx.start_port <= port) \ + a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt)); \ + else \ + a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1)); \ + a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \ + a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \ + a->mpa_rx.pkt_cnt++; \ +} while (0); + +/* Reset SDIO Rx aggregation buffer parameters */ +#define MP_RX_AGGR_BUF_RESET(a) do { \ + a->mpa_rx.pkt_cnt = 0; \ + a->mpa_rx.buf_len = 0; \ + a->mpa_rx.ports = 0; \ + a->mpa_rx.start_port = 0; \ +} while (0); + + +/* data structure for SDIO MPA TX */ +struct mwifiex_sdio_mpa_tx { + /* multiport tx aggregation buffer pointer */ + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u16 ports; + u16 start_port; + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +struct mwifiex_sdio_mpa_rx { + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u16 ports; + u16 start_port; + + struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT]; + u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT]; + + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +int mwifiex_bus_register(void); +void mwifiex_bus_unregister(void); + +struct sdio_mmc_card { + struct sdio_func *func; + struct mwifiex_adapter *adapter; + + u16 mp_rd_bitmap; + u16 mp_wr_bitmap; + + u16 mp_end_port; + u16 mp_data_port_mask; + + u8 curr_rd_port; + u8 curr_wr_port; + + u8 *mp_regs; + + struct mwifiex_sdio_mpa_tx mpa_tx; + struct mwifiex_sdio_mpa_rx mpa_rx; +}; +#endif /* _MWIFIEX_SDIO_H */ |