diff options
Diffstat (limited to 'drivers/net/wireless/libertas/cfg.c')
| -rw-r--r-- | drivers/net/wireless/libertas/cfg.c | 1861 |
1 files changed, 1839 insertions, 22 deletions
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 9d5d3ccf08c..25f90276098 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -7,8 +7,11 @@ */ #include <linux/slab.h> +#include <linux/ieee80211.h> #include <net/cfg80211.h> +#include <asm/unaligned.h> +#include "decl.h" #include "cfg.h" #include "cmd.h" @@ -39,26 +42,27 @@ static struct ieee80211_channel lbs_2ghz_channels[] = { CHAN2G(14, 2484, 0), }; -#define RATETAB_ENT(_rate, _rateid, _flags) { \ - .bitrate = (_rate), \ - .hw_value = (_rateid), \ - .flags = (_flags), \ +#define RATETAB_ENT(_rate, _hw_value, _flags) { \ + .bitrate = (_rate), \ + .hw_value = (_hw_value), \ + .flags = (_flags), \ } +/* Table 6 in section 3.2.1.1 */ static struct ieee80211_rate lbs_rates[] = { - RATETAB_ENT(10, 0x1, 0), - RATETAB_ENT(20, 0x2, 0), - RATETAB_ENT(55, 0x4, 0), - RATETAB_ENT(110, 0x8, 0), - RATETAB_ENT(60, 0x10, 0), - RATETAB_ENT(90, 0x20, 0), - RATETAB_ENT(120, 0x40, 0), - RATETAB_ENT(180, 0x80, 0), - RATETAB_ENT(240, 0x100, 0), - RATETAB_ENT(360, 0x200, 0), - RATETAB_ENT(480, 0x400, 0), - RATETAB_ENT(540, 0x800, 0), + RATETAB_ENT(10, 0, 0), + RATETAB_ENT(20, 1, 0), + RATETAB_ENT(55, 2, 0), + RATETAB_ENT(110, 3, 0), + RATETAB_ENT(60, 9, 0), + RATETAB_ENT(90, 6, 0), + RATETAB_ENT(120, 7, 0), + RATETAB_ENT(180, 8, 0), + RATETAB_ENT(240, 9, 0), + RATETAB_ENT(360, 10, 0), + RATETAB_ENT(480, 11, 0), + RATETAB_ENT(540, 12, 0), }; static struct ieee80211_supported_band lbs_band_2ghz = { @@ -76,22 +80,1616 @@ static const u32 cipher_suites[] = { WLAN_CIPHER_SUITE_CCMP, }; +/* Time to stay on the channel */ +#define LBS_DWELL_PASSIVE 100 +#define LBS_DWELL_ACTIVE 40 +/*************************************************************************** + * Misc utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + +/* + * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 + * in the firmware spec + */ +static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) +{ + int ret = -ENOTSUPP; + + switch (auth_type) { + case NL80211_AUTHTYPE_OPEN_SYSTEM: + case NL80211_AUTHTYPE_SHARED_KEY: + ret = auth_type; + break; + case NL80211_AUTHTYPE_AUTOMATIC: + ret = NL80211_AUTHTYPE_OPEN_SYSTEM; + break; + case NL80211_AUTHTYPE_NETWORK_EAP: + ret = 0x80; + break; + default: + /* silence compiler */ + break; + } + return ret; +} + + +/* Various firmware commands need the list of supported rates, but with + the hight-bit set for basic rates */ +static int lbs_add_rates(u8 *rates) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { + u8 rate = lbs_rates[i].bitrate / 5; + if (rate == 0x02 || rate == 0x04 || + rate == 0x0b || rate == 0x16) + rate |= 0x80; + rates[i] = rate; + } + return ARRAY_SIZE(lbs_rates); +} + + +/*************************************************************************** + * TLV utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + + +/* + * Add ssid TLV + */ +#define LBS_MAX_SSID_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + IEEE80211_MAX_SSID_LEN) + +static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) +{ + struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; + + /* + * TLV-ID SSID 00 00 + * length 06 00 + * ssid 4d 4e 54 45 53 54 + */ + ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); + ssid_tlv->header.len = cpu_to_le16(ssid_len); + memcpy(ssid_tlv->ssid, ssid, ssid_len); + return sizeof(ssid_tlv->header) + ssid_len; +} + + +/* + * Add channel list TLV (section 8.4.2) + * + * Actual channel data comes from priv->wdev->wiphy->channels. + */ +#define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) + +static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, + int last_channel, int active_scan) +{ + int chanscanparamsize = sizeof(struct chanscanparamset) * + (last_channel - priv->scan_channel); + + struct mrvl_ie_header *header = (void *) tlv; + + /* + * TLV-ID CHANLIST 01 01 + * length 0e 00 + * channel 00 01 00 00 00 64 00 + * radio type 00 + * channel 01 + * scan type 00 + * min scan time 00 00 + * max scan time 64 00 + * channel 2 00 02 00 00 00 64 00 + * + */ + + header->type = cpu_to_le16(TLV_TYPE_CHANLIST); + header->len = cpu_to_le16(chanscanparamsize); + tlv += sizeof(struct mrvl_ie_header); + + /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, + last_channel); */ + memset(tlv, 0, chanscanparamsize); + + while (priv->scan_channel < last_channel) { + struct chanscanparamset *param = (void *) tlv; + + param->radiotype = CMD_SCAN_RADIO_TYPE_BG; + param->channumber = + priv->scan_req->channels[priv->scan_channel]->hw_value; + if (active_scan) { + param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); + } else { + param->chanscanmode.passivescan = 1; + param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); + } + tlv += sizeof(struct chanscanparamset); + priv->scan_channel++; + } + return sizeof(struct mrvl_ie_header) + chanscanparamsize; +} + + +/* + * Add rates TLV + * + * The rates are in lbs_bg_rates[], but for the 802.11b + * rates the high bit is set. We add this TLV only because + * there's a firmware which otherwise doesn't report all + * APs in range. + */ +#define LBS_MAX_RATES_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (ARRAY_SIZE(lbs_rates))) + +/* Adds a TLV with all rates the hardware supports */ +static int lbs_add_supported_rates_tlv(u8 *tlv) +{ + size_t i; + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + + /* + * TLV-ID RATES 01 00 + * length 0e 00 + * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + i = lbs_add_rates(tlv); + tlv += i; + rate_tlv->header.len = cpu_to_le16(i); + return sizeof(rate_tlv->header) + i; +} + + +/* + * Adds a TLV with all rates the hardware *and* BSS supports. + */ +static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) +{ + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + int n; + + /* + * 01 00 TLV_TYPE_RATES + * 04 00 len + * 82 84 8b 96 rates + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + + if (!rates_eid) { + /* Fallback: add basic 802.11b rates */ + *tlv++ = 0x82; + *tlv++ = 0x84; + *tlv++ = 0x8b; + *tlv++ = 0x96; + n = 4; + } else { + int hw, ap; + u8 ap_max = rates_eid[1]; + n = 0; + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + u8 hw_rate = lbs_rates[hw].bitrate / 5; + for (ap = 0; ap < ap_max; ap++) { + if (hw_rate == (rates_eid[ap+2] & 0x7f)) { + *tlv++ = rates_eid[ap+2]; + n++; + } + } + } + } + + rate_tlv->header.len = cpu_to_le16(n); + return sizeof(rate_tlv->header) + n; +} + + +/* + * Add auth type TLV. + * + * This is only needed for newer firmware (V9 and up). + */ +#define LBS_MAX_AUTH_TYPE_TLV_SIZE \ + sizeof(struct mrvl_ie_auth_type) + +static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) +{ + struct mrvl_ie_auth_type *auth = (void *) tlv; + + /* + * 1f 01 TLV_TYPE_AUTH_TYPE + * 01 00 len + * 01 auth type + */ + auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); + auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); + return sizeof(*auth); +} + + +/* + * Add channel (phy ds) TLV + */ +#define LBS_MAX_CHANNEL_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_channel_tlv(u8 *tlv, u8 channel) +{ + struct mrvl_ie_ds_param_set *ds = (void *) tlv; + + /* + * 03 00 TLV_TYPE_PHY_DS + * 01 00 len + * 06 channel + */ + ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); + ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); + ds->channel = channel; + return sizeof(*ds); +} + + +/* + * Add (empty) CF param TLV of the form: + */ +#define LBS_MAX_CF_PARAM_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_cf_param_tlv(u8 *tlv) +{ + struct mrvl_ie_cf_param_set *cf = (void *)tlv; + + /* + * 04 00 TLV_TYPE_CF + * 06 00 len + * 00 cfpcnt + * 00 cfpperiod + * 00 00 cfpmaxduration + * 00 00 cfpdurationremaining + */ + cf->header.type = cpu_to_le16(TLV_TYPE_CF); + cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); + return sizeof(*cf); +} + +/* + * Add WPA TLV + */ +#define LBS_MAX_WPA_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + 128 /* TODO: I guessed the size */) + +static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) +{ + size_t tlv_len; + + /* + * We need just convert an IE to an TLV. IEs use u8 for the header, + * u8 type + * u8 len + * u8[] data + * but TLVs use __le16 instead: + * __le16 type + * __le16 len + * u8[] data + */ + *tlv++ = *ie++; + *tlv++ = 0; + tlv_len = *tlv++ = *ie++; + *tlv++ = 0; + while (tlv_len--) + *tlv++ = *ie++; + /* the TLV is two bytes larger than the IE */ + return ie_len + 2; +} + +/*************************************************************************** + * Set Channel + */ + static int lbs_cfg_set_channel(struct wiphy *wiphy, struct net_device *netdev, - struct ieee80211_channel *chan, + struct ieee80211_channel *channel, enum nl80211_channel_type channel_type) { struct lbs_private *priv = wiphy_priv(wiphy); int ret = -ENOTSUPP; - lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", chan->center_freq, channel_type); + lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", + channel->center_freq, channel_type); if (channel_type != NL80211_CHAN_NO_HT) goto out; - ret = lbs_set_channel(priv, chan->hw_value); + ret = lbs_set_channel(priv, channel->hw_value); + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + +/*************************************************************************** + * Scanning + */ + +/* + * When scanning, the firmware doesn't send a nul packet with the power-safe + * bit to the AP. So we cannot stay away from our current channel too long, + * otherwise we loose data. So take a "nap" while scanning every other + * while. + */ +#define LBS_SCAN_BEFORE_NAP 4 + + +/* + * When the firmware reports back a scan-result, it gives us an "u8 rssi", + * which isn't really an RSSI, as it becomes larger when moving away from + * the AP. Anyway, we need to convert that into mBm. + */ +#define LBS_SCAN_RSSI_TO_MBM(rssi) \ + ((-(int)rssi + 3)*100) + +static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, + struct cmd_header *resp) +{ + struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; + int bsssize; + const u8 *pos; + u16 nr_sets; + const u8 *tsfdesc; + int tsfsize; + int i; + int ret = -EILSEQ; + + lbs_deb_enter(LBS_DEB_CFG80211); + + bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); + nr_sets = le16_to_cpu(resp->size); + + /* + * The general layout of the scan response is described in chapter + * 5.7.1. Basically we have a common part, then any number of BSS + * descriptor sections. Finally we have section with the same number + * of TSFs. + * + * cmd_ds_802_11_scan_rsp + * cmd_header + * pos_size + * nr_sets + * bssdesc 1 + * bssid + * rssi + * timestamp + * intvl + * capa + * IEs + * bssdesc 2 + * bssdesc n + * MrvlIEtypes_TsfFimestamp_t + * TSF for BSS 1 + * TSF for BSS 2 + * TSF for BSS n + */ + + pos = scanresp->bssdesc_and_tlvbuffer; + + tsfdesc = pos + bsssize; + tsfsize = 4 + 8 * scanresp->nr_sets; + + /* Validity check: we expect a Marvell-Local TLV */ + i = get_unaligned_le16(tsfdesc); + tsfdesc += 2; + if (i != TLV_TYPE_TSFTIMESTAMP) + goto done; + /* Validity check: the TLV holds TSF values with 8 bytes each, so + * the size in the TLV must match the nr_sets value */ + i = get_unaligned_le16(tsfdesc); + tsfdesc += 2; + if (i / 8 != scanresp->nr_sets) + goto done; + + for (i = 0; i < scanresp->nr_sets; i++) { + const u8 *bssid; + const u8 *ie; + int left; + int ielen; + int rssi; + u16 intvl; + u16 capa; + int chan_no = -1; + const u8 *ssid = NULL; + u8 ssid_len = 0; + DECLARE_SSID_BUF(ssid_buf); + + int len = get_unaligned_le16(pos); + pos += 2; + + /* BSSID */ + bssid = pos; + pos += ETH_ALEN; + /* RSSI */ + rssi = *pos++; + /* Packet time stamp */ + pos += 8; + /* Beacon interval */ + intvl = get_unaligned_le16(pos); + pos += 2; + /* Capabilities */ + capa = get_unaligned_le16(pos); + pos += 2; + + /* To find out the channel, we must parse the IEs */ + ie = pos; + /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon + interval, capabilities */ + ielen = left = len - (6 + 1 + 8 + 2 + 2); + while (left >= 2) { + u8 id, elen; + id = *pos++; + elen = *pos++; + left -= 2; + if (elen > left || elen == 0) + goto done; + if (id == WLAN_EID_DS_PARAMS) + chan_no = *pos; + if (id == WLAN_EID_SSID) { + ssid = pos; + ssid_len = elen; + } + left -= elen; + pos += elen; + } + + /* No channel, no luck */ + if (chan_no != -1) { + struct wiphy *wiphy = priv->wdev->wiphy; + int freq = ieee80211_channel_to_frequency(chan_no); + struct ieee80211_channel *channel = + ieee80211_get_channel(wiphy, freq); + + lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %s, " + "%d dBm\n", + bssid, capa, chan_no, + print_ssid(ssid_buf, ssid, ssid_len), + LBS_SCAN_RSSI_TO_MBM(rssi)/100); + + if (channel || + !(channel->flags & IEEE80211_CHAN_DISABLED)) + cfg80211_inform_bss(wiphy, channel, + bssid, le64_to_cpu(*(__le64 *)tsfdesc), + capa, intvl, ie, ielen, + LBS_SCAN_RSSI_TO_MBM(rssi), + GFP_KERNEL); + } + tsfdesc += 8; + } + ret = 0; + + done: + lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); + return ret; +} + + +/* + * Our scan command contains a TLV, consting of a SSID TLV, a channel list + * TLV and a rates TLV. Determine the maximum size of them: + */ +#define LBS_SCAN_MAX_CMD_SIZE \ + (sizeof(struct cmd_ds_802_11_scan) \ + + LBS_MAX_SSID_TLV_SIZE \ + + LBS_MAX_CHANNEL_LIST_TLV_SIZE \ + + LBS_MAX_RATES_TLV_SIZE) + +/* + * Assumes priv->scan_req is initialized and valid + * Assumes priv->scan_channel is initialized + */ +static void lbs_scan_worker(struct work_struct *work) +{ + struct lbs_private *priv = + container_of(work, struct lbs_private, scan_work.work); + struct cmd_ds_802_11_scan *scan_cmd; + u8 *tlv; /* pointer into our current, growing TLV storage area */ + int last_channel; + int running, carrier; + + lbs_deb_enter(LBS_DEB_SCAN); + + scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); + if (scan_cmd == NULL) + goto out_no_scan_cmd; + + /* prepare fixed part of scan command */ + scan_cmd->bsstype = CMD_BSS_TYPE_ANY; + + /* stop network while we're away from our main channel */ + running = !netif_queue_stopped(priv->dev); + carrier = netif_carrier_ok(priv->dev); + if (running) + netif_stop_queue(priv->dev); + if (carrier) + netif_carrier_off(priv->dev); + + /* prepare fixed part of scan command */ + tlv = scan_cmd->tlvbuffer; + + /* add SSID TLV */ + if (priv->scan_req->n_ssids) + tlv += lbs_add_ssid_tlv(tlv, + priv->scan_req->ssids[0].ssid, + priv->scan_req->ssids[0].ssid_len); + + /* add channel TLVs */ + last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; + if (last_channel > priv->scan_req->n_channels) + last_channel = priv->scan_req->n_channels; + tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, + priv->scan_req->n_ssids); + + /* add rates TLV */ + tlv += lbs_add_supported_rates_tlv(tlv); + + if (priv->scan_channel < priv->scan_req->n_channels) { + cancel_delayed_work(&priv->scan_work); + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(300)); + } + + /* This is the final data we are about to send */ + scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, + sizeof(*scan_cmd)); + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, + tlv - scan_cmd->tlvbuffer); + + __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, + le16_to_cpu(scan_cmd->hdr.size), + lbs_ret_scan, 0); + + if (priv->scan_channel >= priv->scan_req->n_channels) { + /* Mark scan done */ + cfg80211_scan_done(priv->scan_req, false); + priv->scan_req = NULL; + } + + /* Restart network */ + if (carrier) + netif_carrier_on(priv->dev); + if (running && !priv->tx_pending_len) + netif_wake_queue(priv->dev); + + kfree(scan_cmd); + + out_no_scan_cmd: + lbs_deb_leave(LBS_DEB_SCAN); +} + + +static int lbs_cfg_scan(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_scan_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { + /* old scan request not yet processed */ + ret = -EAGAIN; + goto out; + } + + lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", + request->n_ssids, request->n_channels, request->ie_len); + + priv->scan_channel = 0; + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(50)); + + if (priv->surpriseremoved) + ret = -EIO; + + priv->scan_req = request; + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + + +/*************************************************************************** + * Events + */ + +void lbs_send_disconnect_notification(struct lbs_private *priv) +{ + lbs_deb_enter(LBS_DEB_CFG80211); + + cfg80211_disconnected(priv->dev, + 0, + NULL, 0, + GFP_KERNEL); + + lbs_deb_leave(LBS_DEB_CFG80211); +} + +void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) +{ + lbs_deb_enter(LBS_DEB_CFG80211); + + cfg80211_michael_mic_failure(priv->dev, + priv->assoc_bss, + event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? + NL80211_KEYTYPE_GROUP : + NL80211_KEYTYPE_PAIRWISE, + -1, + NULL, + GFP_KERNEL); + + lbs_deb_leave(LBS_DEB_CFG80211); +} + + + + +/*************************************************************************** + * Connect/disconnect + */ + + +/* + * This removes all WEP keys + */ +static int lbs_remove_wep_keys(struct lbs_private *priv) +{ + struct cmd_ds_802_11_set_wep cmd; + int ret; + + lbs_deb_enter(LBS_DEB_CFG80211); + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.keyindex = cpu_to_le16(priv->wep_tx_key); + cmd.action = cpu_to_le16(CMD_ACT_REMOVE); + + ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); + + lbs_deb_leave(LBS_DEB_CFG80211); + return ret; +} + +/* + * Set WEP keys + */ +static int lbs_set_wep_keys(struct lbs_private *priv) +{ + struct cmd_ds_802_11_set_wep cmd; + int i; + int ret; + + lbs_deb_enter(LBS_DEB_CFG80211); + + /* + * command 13 00 + * size 50 00 + * sequence xx xx + * result 00 00 + * action 02 00 ACT_ADD + * transmit key 00 00 + * type for key 1 01 WEP40 + * type for key 2 00 + * type for key 3 00 + * type for key 4 00 + * key 1 39 39 39 39 39 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 2 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 3 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 4 00 00 00 00 00 00 00 00 + */ + if (priv->wep_key_len[0] || priv->wep_key_len[1] || + priv->wep_key_len[2] || priv->wep_key_len[3]) { + /* Only set wep keys if we have at least one of them */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.keyindex = cpu_to_le16(priv->wep_tx_key); + cmd.action = cpu_to_le16(CMD_ACT_ADD); + + for (i = 0; i < 4; i++) { + switch (priv->wep_key_len[i]) { + case WLAN_KEY_LEN_WEP40: + cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; + break; + case WLAN_KEY_LEN_WEP104: + cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; + break; + default: + cmd.keytype[i] = 0; + break; + } + memcpy(cmd.keymaterial[i], priv->wep_key[i], + priv->wep_key_len[i]); + } + + ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); + } else { + /* Otherwise remove all wep keys */ + ret = lbs_remove_wep_keys(priv); + } + + lbs_deb_leave(LBS_DEB_CFG80211); + return ret; +} + + +/* + * Enable/Disable RSN status + */ +static int lbs_enable_rsn(struct lbs_private *priv, int enable) +{ + struct cmd_ds_802_11_enable_rsn cmd; + int ret; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", enable); + + /* + * cmd 2f 00 + * size 0c 00 + * sequence xx xx + * result 00 00 + * action 01 00 ACT_SET + * enable 01 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.enable = cpu_to_le16(enable); + + ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); + + lbs_deb_leave(LBS_DEB_CFG80211); + return ret; +} + + +/* + * Set WPA/WPA key material + */ + +/* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we + * get rid of WEXT, this should go into host.h */ + +struct cmd_key_material { + struct cmd_header hdr; + + __le16 action; + struct MrvlIEtype_keyParamSet param; +} __packed; + +static int lbs_set_key_material(struct lbs_private *priv, + int key_type, + int key_info, + u8 *key, u16 key_len) +{ + struct cmd_key_material cmd; + int ret; + + lbs_deb_enter(LBS_DEB_CFG80211); + + /* + * Example for WPA (TKIP): + * + * cmd 5e 00 + * size 34 00 + * sequence xx xx + * result 00 00 + * action 01 00 + * TLV type 00 01 key param + * length 00 26 + * key type 01 00 TKIP + * key info 06 00 UNICAST | ENABLED + * key len 20 00 + * key 32 bytes + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); + cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); + cmd.param.keytypeid = cpu_to_le16(key_type); + cmd.param.keyinfo = cpu_to_le16(key_info); + cmd.param.keylen = cpu_to_le16(key_len); + if (key && key_len) + memcpy(cmd.param.key, key, key_len); + + ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); + + lbs_deb_leave(LBS_DEB_CFG80211); + return ret; +} + + +/* + * Sets the auth type (open, shared, etc) in the firmware. That + * we use CMD_802_11_AUTHENTICATE is misleading, this firmware + * command doesn't send an authentication frame at all, it just + * stores the auth_type. + */ +static int lbs_set_authtype(struct lbs_private *priv, + struct cfg80211_connect_params *sme) +{ + struct cmd_ds_802_11_authenticate cmd; + int ret; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", sme->auth_type); + + /* + * cmd 11 00 + * size 19 00 + * sequence xx xx + * result 00 00 + * BSS id 00 13 19 80 da 30 + * auth type 00 + * reserved 00 00 00 00 00 00 00 00 00 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + if (sme->bssid) + memcpy(cmd.bssid, sme->bssid, ETH_ALEN); + /* convert auth_type */ + ret = lbs_auth_to_authtype(sme->auth_type); + if (ret < 0) + goto done; + + cmd.authtype = ret; + ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); + + done: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + +/* + * Create association request + */ +#define LBS_ASSOC_MAX_CMD_SIZE \ + (sizeof(struct cmd_ds_802_11_associate) \ + - 512 /* cmd_ds_802_11_associate.iebuf */ \ + + LBS_MAX_SSID_TLV_SIZE \ + + LBS_MAX_CHANNEL_TLV_SIZE \ + + LBS_MAX_CF_PARAM_TLV_SIZE \ + + LBS_MAX_AUTH_TYPE_TLV_SIZE \ + + LBS_MAX_WPA_TLV_SIZE) + +static int lbs_associate(struct lbs_private *priv, + struct cfg80211_bss *bss, + struct cfg80211_connect_params *sme) +{ + struct cmd_ds_802_11_associate_response *resp; + struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, + GFP_KERNEL); + const u8 *ssid_eid; + size_t len, resp_ie_len; + int status; + int ret; + u8 *pos = &(cmd->iebuf[0]); + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (!cmd) { + ret = -ENOMEM; + goto done; + } + + /* + * cmd 50 00 + * length 34 00 + * sequence xx xx + * result 00 00 + * BSS id 00 13 19 80 da 30 + * capabilities 11 00 + * listen interval 0a 00 + * beacon interval 00 00 + * DTIM period 00 + * TLVs xx (up to 512 bytes) + */ + cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); + + /* Fill in static fields */ + memcpy(cmd->bssid, bss->bssid, ETH_ALEN); + cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); + cmd->capability = cpu_to_le16(bss->capability); + + /* add SSID TLV */ + ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); + if (ssid_eid) + pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); + else + lbs_deb_assoc("no SSID\n"); + + /* add DS param TLV */ + if (bss->channel) + pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); + else + lbs_deb_assoc("no channel\n"); + + /* add (empty) CF param TLV */ + pos += lbs_add_cf_param_tlv(pos); + + /* add rates TLV */ + pos += lbs_add_common_rates_tlv(pos, bss); + + /* add auth type TLV */ + if (priv->fwrelease >= 0x09000000) + pos += lbs_add_auth_type_tlv(pos, sme->auth_type); + + /* add WPA/WPA2 TLV */ + if (sme->ie && sme->ie_len) + pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); + + len = (sizeof(*cmd) - sizeof(cmd->iebuf)) + + (u16)(pos - (u8 *) &cmd->iebuf); + cmd->hdr.size = cpu_to_le16(len); + + /* store for later use */ + memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); + + ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); + if (ret) + goto done; + + + /* generate connect message to cfg80211 */ + + resp = (void *) cmd; /* recast for easier field access */ + status = le16_to_cpu(resp->statuscode); + + /* Convert statis code of old firmware */ + if (priv->fwrelease < 0x09000000) + switch (status) { + case 0: + break; + case 1: + lbs_deb_assoc("invalid association parameters\n"); + status = WLAN_STATUS_CAPS_UNSUPPORTED; + break; + case 2: + lbs_deb_assoc("timer expired while waiting for AP\n"); + status = WLAN_STATUS_AUTH_TIMEOUT; + break; + case 3: + lbs_deb_assoc("association refused by AP\n"); + status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; + break; + case 4: + lbs_deb_assoc("authentication refused by AP\n"); + status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; + break; + default: + lbs_deb_assoc("association failure %d\n", status); + status = WLAN_STATUS_UNSPECIFIED_FAILURE; + } + + lbs_deb_assoc("status %d, capability 0x%04x\n", status, + le16_to_cpu(resp->capability)); + + resp_ie_len = le16_to_cpu(resp->hdr.size) + - sizeof(resp->hdr) + - 6; + cfg80211_connect_result(priv->dev, + priv->assoc_bss, + sme->ie, sme->ie_len, + resp->iebuf, resp_ie_len, + status, + GFP_KERNEL); + + if (status == 0) { + /* TODO: get rid of priv->connect_status */ + priv->connect_status = LBS_CONNECTED; + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_tx_wake_all_queues(priv->dev); + } + + +done: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + +static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + struct cfg80211_bss *bss = NULL; + int ret = 0; + u8 preamble = RADIO_PREAMBLE_SHORT; + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (sme->bssid) { + bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, + sme->ssid, sme->ssid_len, + WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); + } else { + /* + * Here we have an impedance mismatch. The firmware command + * CMD_802_11_ASSOCIATE always needs a BSSID, it cannot + * connect otherwise. However, for the connect-API of + * cfg80211 the bssid is purely optional. We don't get one, + * except the user specifies one on the "iw" command line. + * + * If we don't got one, we could initiate a scan and look + * for the best matching cfg80211_bss entry. + * + * Or, better yet, net/wireless/sme.c get's rewritten into + * something more generally useful. + */ + lbs_pr_err("TODO: no BSS specified\n"); + ret = -ENOTSUPP; + goto done; + } + + + if (!bss) { + lbs_pr_err("assicate: bss %pM not in scan results\n", + sme->bssid); + ret = -ENOENT; + goto done; + } + lbs_deb_assoc("trying %pM", sme->bssid); + lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", + sme->crypto.cipher_group, + sme->key_idx, sme->key_len); + + /* As this is a new connection, clear locally stored WEP keys */ + priv->wep_tx_key = 0; + memset(priv->wep_key, 0, sizeof(priv->wep_key)); + memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); + + /* set/remove WEP keys */ + switch (sme->crypto.cipher_group) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + /* Store provided WEP keys in priv-> */ + priv->wep_tx_key = sme->key_idx; + priv->wep_key_len[sme->key_idx] = sme->key_len; + memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); + /* Set WEP keys and WEP mode */ + lbs_set_wep_keys(priv); + priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; + lbs_set_mac_control(priv); + /* No RSN mode for WEP */ + lbs_enable_rsn(priv, 0); + break; + case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ + /* + * If we don't have no WEP, no WPA and no WPA2, + * we remove all keys like in the WPA/WPA2 setup, + * we just don't set RSN. + * + * Therefore: fall-throught + */ + case WLAN_CIPHER_SUITE_TKIP: + case WLAN_CIPHER_SUITE_CCMP: + /* Remove WEP keys and WEP mode */ + lbs_remove_wep_keys(priv); + priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; + lbs_set_mac_control(priv); + + /* clear the WPA/WPA2 keys */ + lbs_set_key_material(priv, + KEY_TYPE_ID_WEP, /* doesn't matter */ + KEY_INFO_WPA_UNICAST, + NULL, 0); + lbs_set_key_material(priv, + KEY_TYPE_ID_WEP, /* doesn't matter */ + KEY_INFO_WPA_MCAST, + NULL, 0); + /* RSN mode for WPA/WPA2 */ + lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); + break; + default: + lbs_pr_err("unsupported cipher group 0x%x\n", + sme->crypto.cipher_group); + ret = -ENOTSUPP; + goto done; + } + + lbs_set_authtype(priv, sme); + lbs_set_radio(priv, preamble, 1); + + /* Do the actual association */ + lbs_associate(priv, bss, sme); + + done: + if (bss) + cfg80211_put_bss(bss); + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + +static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + struct cmd_ds_802_11_deauthenticate cmd; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "reason_code %d", reason_code); + + /* store for lbs_cfg_ret_disconnect() */ + priv->disassoc_reason = reason_code; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + /* Mildly ugly to use a locally store my own BSSID ... */ + memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); + cmd.reasoncode = cpu_to_le16(reason_code); + + if (lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd)) + return -EFAULT; + + cfg80211_disconnected(priv->dev, + priv->disassoc_reason, + NULL, 0, + GFP_KERNEL); + priv->connect_status = LBS_DISCONNECTED; + + return 0; +} + + +static int lbs_cfg_set_default_key(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (key_index != priv->wep_tx_key) { + lbs_deb_assoc("set_default_key: to %d\n", key_index); + priv->wep_tx_key = key_index; + lbs_set_wep_keys(priv); + } + + return 0; +} + + +static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, + u8 idx, const u8 *mac_addr, + struct key_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + u16 key_info; + u16 key_type; + int ret = 0; + + lbs_deb_enter(LBS_DEB_CFG80211); + + lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", + params->cipher, mac_addr); + lbs_deb_assoc("add_key: key index %d, key len %d\n", + idx, params->key_len); + if (params->key_len) + lbs_deb_hex(LBS_DEB_CFG80211, "KEY", + params->key, params->key_len); + + lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); + if (params->seq_len) + lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", + params->seq, params->seq_len); + + switch (params->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + /* actually compare if something has changed ... */ + if ((priv->wep_key_len[idx] != params->key_len) || + memcmp(priv->wep_key[idx], + params->key, params->key_len) != 0) { + priv->wep_key_len[idx] = params->key_len; + memcpy(priv->wep_key[idx], + params->key, params->key_len); + lbs_set_wep_keys(priv); + } + break; + case WLAN_CIPHER_SUITE_TKIP: + case WLAN_CIPHER_SUITE_CCMP: + key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) + ? KEY_INFO_WPA_UNICAST + : KEY_INFO_WPA_MCAST); + key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) + ? KEY_TYPE_ID_TKIP + : KEY_TYPE_ID_AES; + lbs_set_key_material(priv, + key_type, + key_info, + params->key, params->key_len); + break; + default: + lbs_pr_err("unhandled cipher 0x%x\n", params->cipher); + ret = -ENOTSUPP; + break; + } + + return ret; +} + + +static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, const u8 *mac_addr) +{ + + lbs_deb_enter(LBS_DEB_CFG80211); + + lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", + key_index, mac_addr); + +#ifdef TODO + struct lbs_private *priv = wiphy_priv(wiphy); + /* + * I think can keep this a NO-OP, because: + + * - we clear all keys whenever we do lbs_cfg_connect() anyway + * - neither "iw" nor "wpa_supplicant" won't call this during + * an ongoing connection + * - TODO: but I have to check if this is still true when + * I set the AP to periodic re-keying + * - we've not kzallec() something when we've added a key at + * lbs_cfg_connect() or lbs_cfg_add_key(). + * + * This causes lbs_cfg_del_key() only called at disconnect time, + * where we'd just waste time deleting a key that is not going + * to be used anyway. + */ + if (key_index < 3 && priv->wep_key_len[key_index]) { + priv->wep_key_len[key_index] = 0; + lbs_set_wep_keys(priv); + } +#endif + + return 0; +} + + +/*************************************************************************** + * Get station + */ + +static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, + u8 *mac, struct station_info *sinfo) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + s8 signal, noise; + int ret; + size_t i; + + lbs_deb_enter(LBS_DEB_CFG80211); + + sinfo->filled |= STATION_INFO_TX_BYTES | + STATION_INFO_TX_PACKETS | + STATION_INFO_RX_BYTES | + STATION_INFO_RX_PACKETS; + sinfo->tx_bytes = priv->dev->stats.tx_bytes; + sinfo->tx_packets = priv->dev->stats.tx_packets; + sinfo->rx_bytes = priv->dev->stats.rx_bytes; + sinfo->rx_packets = priv->dev->stats.rx_packets; + + /* Get current RSSI */ + ret = lbs_get_rssi(priv, &signal, &noise); + if (ret == 0) { + sinfo->signal = signal; + sinfo->filled |= STATION_INFO_SIGNAL; + } + + /* Convert priv->cur_rate from hw_value to NL80211 value */ + for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { + if (priv->cur_rate == lbs_rates[i].hw_value) { + sinfo->txrate.legacy = lbs_rates[i].bitrate; + sinfo->filled |= STATION_INFO_TX_BITRATE; + break; + } + } + + return 0; +} + + + + +/*************************************************************************** + * "Site survey", here just current channel and noise level + */ + +static int lbs_get_survey(struct wiphy *wiphy, struct net_device *dev, + int idx, struct survey_info *survey) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + s8 signal, noise; + int ret; + + if (idx != 0) + ret = -ENOENT; + + lbs_deb_enter(LBS_DEB_CFG80211); + + survey->channel = ieee80211_get_channel(wiphy, + ieee80211_channel_to_frequency(priv->channel)); + + ret = lbs_get_rssi(priv, &signal, &noise); + if (ret == 0) { + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = noise; + } + + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + + +/*************************************************************************** + * Change interface + */ + +static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + + lbs_deb_enter(LBS_DEB_CFG80211); + + switch (type) { + case NL80211_IFTYPE_MONITOR: + ret = lbs_set_monitor_mode(priv, 1); + break; + case NL80211_IFTYPE_STATION: + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) + ret = lbs_set_monitor_mode(priv, 0); + if (!ret) + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 1); + break; + case NL80211_IFTYPE_ADHOC: + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) + ret = lbs_set_monitor_mode(priv, 0); + if (!ret) + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 2); + break; + default: + ret = -ENOTSUPP; + } + + if (!ret) + priv->wdev->iftype = type; + + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + +/*************************************************************************** + * IBSS (Ad-Hoc) + */ + +/* The firmware needs the following bits masked out of the beacon-derived + * capability field when associating/joining to a BSS: + * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) + */ +#define CAPINFO_MASK (~(0xda00)) + + +static void lbs_join_post(struct lbs_private *priv, + struct cfg80211_ibss_params *params, + u8 *bssid, u16 capability) +{ + u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ + 2 + 4 + /* basic rates */ + 2 + 1 + /* DS parameter */ + 2 + 2 + /* atim */ + 2 + 8]; /* extended rates */ + u8 *fake = fake_ie; + + lbs_deb_enter(LBS_DEB_CFG80211); + + /* + * For cfg80211_inform_bss, we'll need a fake IE, as we can't get + * the real IE from the firmware. So we fabricate a fake IE based on + * what the firmware actually sends (sniffed with wireshark). + */ + /* Fake SSID IE */ + *fake++ = WLAN_EID_SSID; + *fake++ = params->ssid_len; + memcpy(fake, params->ssid, params->ssid_len); + fake += params->ssid_len; + /* Fake supported basic rates IE */ + *fake++ = WLAN_EID_SUPP_RATES; + *fake++ = 4; + *fake++ = 0x82; + *fake++ = 0x84; + *fake++ = 0x8b; + *fake++ = 0x96; + /* Fake DS channel IE */ + *fake++ = WLAN_EID_DS_PARAMS; + *fake++ = 1; + *fake++ = params->channel->hw_value; + /* Fake IBSS params IE */ + *fake++ = WLAN_EID_IBSS_PARAMS; + *fake++ = 2; + *fake++ = 0; /* ATIM=0 */ + *fake++ = 0; + /* Fake extended rates IE, TODO: don't add this for 802.11b only, + * but I don't know how this could be checked */ + *fake++ = WLAN_EID_EXT_SUPP_RATES; + *fake++ = 8; + *fake++ = 0x0c; + *fake++ = 0x12; + *fake++ = 0x18; + *fake++ = 0x24; + *fake++ = 0x30; + *fake++ = 0x48; + *fake++ = 0x60; + *fake++ = 0x6c; + lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); + + cfg80211_inform_bss(priv->wdev->wiphy, + params->channel, + bssid, + 0, + capability, + params->beacon_interval, + fake_ie, fake - fake_ie, + 0, GFP_KERNEL); + + memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); + priv->wdev->ssid_len = params->ssid_len; + + cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL); + + /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ + priv->connect_status = LBS_CONNECTED; + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_wake_queue(priv->dev); + + lbs_deb_leave(LBS_DEB_CFG80211); +} + +static int lbs_ibss_join_existing(struct lbs_private *priv, + struct cfg80211_ibss_params *params, + struct cfg80211_bss *bss) +{ + const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + struct cmd_ds_802_11_ad_hoc_join cmd; + u8 preamble = RADIO_PREAMBLE_SHORT; + int ret = 0; + + lbs_deb_enter(LBS_DEB_CFG80211); + + /* TODO: set preamble based on scan result */ + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; + + /* + * Example CMD_802_11_AD_HOC_JOIN command: + * + * command 2c 00 CMD_802_11_AD_HOC_JOIN + * size 65 00 + * sequence xx xx + * result 00 00 + * bssid 02 27 27 97 2f 96 + * ssid 49 42 53 53 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * type 02 CMD_BSS_TYPE_IBSS + * beacon period 64 00 + * dtim period 00 + * timestamp 00 00 00 00 00 00 00 00 + * localtime 00 00 00 00 00 00 00 00 + * IE DS 03 + * IE DS len 01 + * IE DS channel 01 + * reserveed 00 00 00 00 + * IE IBSS 06 + * IE IBSS len 02 + * IE IBSS atim 00 00 + * reserved 00 00 00 00 + * capability 02 00 + * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 + * fail timeout ff 00 + * probe delay 00 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + + memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); + memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); + cmd.bss.type = CMD_BSS_TYPE_IBSS; + cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); + cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; + cmd.bss.ds.header.len = 1; + cmd.bss.ds.channel = params->channel->hw_value; + cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; + cmd.bss.ibss.header.len = 2; + cmd.bss.ibss.atimwindow = 0; + cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); + + /* set rates to the intersection of our rates and the rates in the + bss */ + if (!rates_eid) { + lbs_add_rates(cmd.bss.rates); + } else { + int hw, i; + u8 rates_max = rates_eid[1]; + u8 *rates = cmd.bss.rates; + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + u8 hw_rate = lbs_rates[hw].bitrate / 5; + for (i = 0; i < rates_max; i++) { + if (hw_rate == (rates_eid[i+2] & 0x7f)) { + u8 rate = rates_eid[i+2]; + if (rate == 0x02 || rate == 0x04 || + rate == 0x0b || rate == 0x16) + rate |= 0x80; + *rates++ = rate; + } + } + } + } + + /* Only v8 and below support setting this */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { + cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + } + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); + if (ret) + goto out; + + /* + * This is a sample response to CMD_802_11_AD_HOC_JOIN: + * + * response 2c 80 + * size 09 00 + * sequence xx xx + * result 00 00 + * reserved 00 + */ + lbs_join_post(priv, params, bss->bssid, bss->capability); out: lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); @@ -100,9 +1698,169 @@ static int lbs_cfg_set_channel(struct wiphy *wiphy, +static int lbs_ibss_start_new(struct lbs_private *priv, + struct cfg80211_ibss_params *params) +{ + struct cmd_ds_802_11_ad_hoc_start cmd; + struct cmd_ds_802_11_ad_hoc_result *resp = + (struct cmd_ds_802_11_ad_hoc_result *) &cmd; + u8 preamble = RADIO_PREAMBLE_SHORT; + int ret = 0; + u16 capability; + + lbs_deb_enter(LBS_DEB_CFG80211); + + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; + + /* + * Example CMD_802_11_AD_HOC_START command: + * + * command 2b 00 CMD_802_11_AD_HOC_START + * size b1 00 + * sequence xx xx + * result 00 00 + * ssid 54 45 53 54 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * bss type 02 + * beacon period 64 00 + * dtim period 00 + * IE IBSS 06 + * IE IBSS len 02 + * IE IBSS atim 00 00 + * reserved 00 00 00 00 + * IE DS 03 + * IE DS len 01 + * IE DS channel 01 + * reserved 00 00 00 00 + * probe delay 00 00 + * capability 02 00 + * rates 82 84 8b 96 (basic rates with have bit 7 set) + * 0c 12 18 24 30 48 60 6c + * padding 100 bytes + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.ssid, params->ssid, params->ssid_len); + cmd.bsstype = CMD_BSS_TYPE_IBSS; + cmd.beaconperiod = cpu_to_le16(params->beacon_interval); + cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; + cmd.ibss.header.len = 2; + cmd.ibss.atimwindow = 0; + cmd.ds.header.id = WLAN_EID_DS_PARAMS; + cmd.ds.header.len = 1; + cmd.ds.channel = params->channel->hw_value; + /* Only v8 and below support setting probe delay */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + /* TODO: mix in WLAN_CAPABILITY_PRIVACY */ + capability = WLAN_CAPABILITY_IBSS; + cmd.capability = cpu_to_le16(capability); + lbs_add_rates(cmd.rates); + + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); + if (ret) + goto out; + + /* + * This is a sample response to CMD_802_11_AD_HOC_JOIN: + * + * response 2b 80 + * size 14 00 + * sequence xx xx + * result 00 00 + * reserved 00 + * bssid 02 2b 7b 0f 86 0e + */ + lbs_join_post(priv, params, resp->bssid, capability); + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + +static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + struct cfg80211_bss *bss; + DECLARE_SSID_BUF(ssid_buf); + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (!params->channel) { + ret = -ENOTSUPP; + goto out; + } + + ret = lbs_set_channel(priv, params->channel->hw_value); + if (ret) + goto out; + + /* Search if someone is beaconing. This assumes that the + * bss list is populated already */ + bss = cfg80211_get_bss(wiphy, params->channel, params->bssid, + params->ssid, params->ssid_len, + WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); + + if (bss) { + ret = lbs_ibss_join_existing(priv, params, bss); + cfg80211_put_bss(bss); + } else + ret = lbs_ibss_start_new(priv, params); + + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + +static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + struct cmd_ds_802_11_ad_hoc_stop cmd; + int ret = 0; + + lbs_deb_enter(LBS_DEB_CFG80211); + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); + + /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ + lbs_mac_event_disconnected(priv); + + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + + +/*************************************************************************** + * Initialization + */ static struct cfg80211_ops lbs_cfg80211_ops = { .set_channel = lbs_cfg_set_channel, + .scan = lbs_cfg_scan, + .connect = lbs_cfg_connect, + .disconnect = lbs_cfg_disconnect, + .add_key = lbs_cfg_add_key, + .del_key = lbs_cfg_del_key, + .set_default_key = lbs_cfg_set_default_key, + .get_station = lbs_cfg_get_station, + .dump_survey = lbs_get_survey, + .change_virtual_intf = lbs_change_intf, + .join_ibss = lbs_join_ibss, + .leave_ibss = lbs_leave_ibss, }; @@ -142,6 +1900,36 @@ struct wireless_dev *lbs_cfg_alloc(struct device *dev) } +static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) +{ + struct region_code_mapping { + const char *cn; + int code; + }; + + /* Section 5.17.2 */ + static struct region_code_mapping regmap[] = { + {"US ", 0x10}, /* US FCC */ + {"CA ", 0x20}, /* Canada */ + {"EU ", 0x30}, /* ETSI */ + {"ES ", 0x31}, /* Spain */ + {"FR ", 0x32}, /* France */ + {"JP ", 0x40}, /* Japan */ + }; + size_t i; + + lbs_deb_enter(LBS_DEB_CFG80211); + + for (i = 0; i < ARRAY_SIZE(regmap); i++) + if (regmap[i].code == priv->regioncode) { + regulatory_hint(priv->wdev->wiphy, regmap[i].cn); + break; + } + + lbs_deb_leave(LBS_DEB_CFG80211); +} + + /* * This function get's called after lbs_setup_firmware() determined the * firmware capabities. So we can setup the wiphy according to our @@ -157,10 +1945,12 @@ int lbs_cfg_register(struct lbs_private *priv) wdev->wiphy->max_scan_ssids = 1; wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - /* TODO: BIT(NL80211_IFTYPE_ADHOC); */ - wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + wdev->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + if (lbs_rtap_supported(priv)) + wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); - /* TODO: honor priv->regioncode */ wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz; /* @@ -169,6 +1959,7 @@ int lbs_cfg_register(struct lbs_private *priv) */ wdev->wiphy->cipher_suites = cipher_suites; wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + wdev->wiphy->reg_notifier = lbs_reg_notifier; ret = wiphy_register(wdev->wiphy); if (ret < 0) @@ -180,10 +1971,36 @@ int lbs_cfg_register(struct lbs_private *priv) if (ret) lbs_pr_err("cannot register network device\n"); + INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); + + lbs_cfg_set_regulatory_hint(priv); + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; } +int lbs_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " + "callback for domain %c%c\n", request->alpha2[0], + request->alpha2[1]); + + ret = lbs_set_11d_domain_info(priv, request, wiphy->bands); + + lbs_deb_leave(LBS_DEB_CFG80211); + return ret; +} + +void lbs_scan_deinit(struct lbs_private *priv) +{ + lbs_deb_enter(LBS_DEB_CFG80211); + cancel_delayed_work_sync(&priv->scan_work); +} + void lbs_cfg_free(struct lbs_private *priv) { |