diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi')
54 files changed, 6015 insertions, 10694 deletions
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 47bee0ee0a7..8304f6406a1 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -1,26 +1,29 @@ config IWLWIFI - tristate - -config IWLCORE - tristate "Intel Wireless Wifi Core" + tristate "Intel Wireless Wifi" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select LIB80211 - select IWLWIFI + select FW_LOADER select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS select RFKILL if IWLWIFI_RFKILL config IWLWIFI_LEDS - bool - default n + bool "Enable LED support in iwlagn and iwl3945 drivers" + depends on IWLWIFI config IWLWIFI_RFKILL - boolean "Iwlwifi RF kill support" - depends on IWLCORE + bool "Enable RF kill support in iwlagn and iwl3945 drivers" + depends on IWLWIFI + +config IWLWIFI_SPECTRUM_MEASUREMENT + bool "Enable Spectrum Measurement in iwlagn driver" + depends on IWLWIFI + ---help--- + This option will enable spectrum measurement for the iwlagn driver. config IWLWIFI_DEBUG - bool "Enable full debugging output in iwlagn driver" - depends on IWLCORE + bool "Enable full debugging output in iwlagn and iwl3945 drivers" + depends on IWLWIFI ---help--- This option will enable debug tracing output for the iwlwifi drivers @@ -44,16 +47,14 @@ config IWLWIFI_DEBUG any problems you may encounter. config IWLWIFI_DEBUGFS - bool "Iwlwifi debugfs support" - depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS + bool "iwlagn debugfs support" + depends on IWLWIFI && IWLWIFI_DEBUG && MAC80211_DEBUGFS ---help--- Enable creation of debugfs files for the iwlwifi drivers. config IWLAGN - tristate "Intel Wireless WiFi Next Gen AGN" - depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL - select FW_LOADER - select IWLCORE + tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)" + depends on IWLWIFI ---help--- Select to build the driver supporting the: @@ -76,19 +77,6 @@ config IWLAGN say M here and read <file:Documentation/kbuild/modules.txt>. The module will be called iwlagn.ko. -config IWLAGN_SPECTRUM_MEASUREMENT - bool "Enable Spectrum Measurement in iwlagn driver" - depends on IWLAGN - ---help--- - This option will enable spectrum measurement for the iwlagn driver. - -config IWLAGN_LEDS - bool "Enable LEDS features in iwlagn driver" - depends on IWLAGN - select IWLWIFI_LEDS - ---help--- - This option enables LEDS for the iwlagn drivers - config IWL4965 bool "Intel Wireless WiFi 4965AGN" @@ -97,20 +85,14 @@ config IWL4965 This option enables support for Intel Wireless WiFi Link 4965AGN config IWL5000 - bool "Intel Wireless WiFi 5000AGN" + bool "Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series" depends on IWLAGN ---help--- This option enables support for Intel Wireless WiFi Link 5000AGN Family config IWL3945 - tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" - depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL - select FW_LOADER - select LIB80211 - select IWLWIFI - select MAC80211_LEDS if IWL3945_LEDS - select LEDS_CLASS if IWL3945_LEDS - select RFKILL if IWL3945_RFKILL + tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" + depends on IWLWIFI ---help--- Select to build the driver supporting the: @@ -133,45 +115,8 @@ config IWL3945 say M here and read <file:Documentation/kbuild/modules.txt>. The module will be called iwl3945.ko. -config IWL3945_RFKILL - bool "Enable RF kill support in iwl3945 drivers" - depends on IWL3945 - config IWL3945_SPECTRUM_MEASUREMENT - bool "Enable Spectrum Measurement in iwl3945 drivers" + bool "Enable Spectrum Measurement in iwl3945 driver" depends on IWL3945 ---help--- This option will enable spectrum measurement for the iwl3945 driver. - -config IWL3945_LEDS - bool "Enable LEDS features in iwl3945 driver" - depends on IWL3945 - ---help--- - This option enables LEDS for the iwl3945 driver. - -config IWL3945_DEBUG - bool "Enable full debugging output in iwl3945 driver" - depends on IWL3945 - ---help--- - This option will enable debug tracing output for the iwl3945 - driver. - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/bus/pci/drivers/${DRIVER}/debug_level - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level - - You can find the list of debug mask values in: - drivers/net/wireless/iwlwifi/iwl-3945-debug.h - - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. - diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 0be9e6b66aa..d79d97ad61a 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -1,20 +1,21 @@ -obj-$(CONFIG_IWLCORE) += iwlcore.o +obj-$(CONFIG_IWLWIFI) += iwlcore.o iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o iwlcore-objs += iwl-scan.o iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o -iwlcore-$(CONFIG_IWLAGN_SPECTRUM_MEASUREMENT) += iwl-spectrum.o +iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o obj-$(CONFIG_IWLAGN) += iwlagn.o -iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-hcmd-check.o +iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwlagn-$(CONFIG_IWL4965) += iwl-4965.o iwlagn-$(CONFIG_IWL5000) += iwl-5000.o +iwlagn-$(CONFIG_IWL5000) += iwl-6000.o +iwlagn-$(CONFIG_IWL5000) += iwl-1000.o obj-$(CONFIG_IWL3945) += iwl3945.o -iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o -iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o +iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c new file mode 100644 index 00000000000..7da52f1cc1d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -0,0 +1,73 @@ +/****************************************************************************** + * + * Copyright(c) 2008-2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/mac80211.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-sta.h" +#include "iwl-helpers.h" +#include "iwl-5000-hw.h" + +/* Highest firmware API version supported */ +#define IWL1000_UCODE_API_MAX 2 + +/* Lowest firmware API version supported */ +#define IWL1000_UCODE_API_MIN 1 + +#define IWL1000_FW_PRE "iwlwifi-1000-" +#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode" +#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api) + +struct iwl_cfg iwl1000_bgn_cfg = { + .name = "1000 Series BGN", + .fw_name_pre = IWL1000_FW_PRE, + .ucode_api_max = IWL1000_UCODE_API_MAX, + .ucode_api_min = IWL1000_UCODE_API_MIN, + .sku = IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .eeprom_ver = EEPROM_5000_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, + .mod_params = &iwl50_mod_params, + .valid_tx_ant = ANT_A, + .valid_rx_ant = ANT_AB, + .need_pll_cfg = true, +}; + diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h deleted file mode 100644 index c6f4eb54a2b..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h +++ /dev/null @@ -1,1702 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-3945-commands.h) only for uCode API definitions. - * Please use iwl-3945-hw.h for hardware-related definitions. - * Please use iwl-3945.h for driver implementation definitions. - */ - -#ifndef __iwl_3945_commands_h__ -#define __iwl_3945_commands_h__ - -/* uCode version contains 4 values: Major/Minor/API/Serial */ -#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) -#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) -#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) -#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) - -enum { - REPLY_ALIVE = 0x1, - REPLY_ERROR = 0x2, - - /* RXON and QOS commands */ - REPLY_RXON = 0x10, - REPLY_RXON_ASSOC = 0x11, - REPLY_QOS_PARAM = 0x13, - REPLY_RXON_TIMING = 0x14, - - /* Multi-Station support */ - REPLY_ADD_STA = 0x18, - REPLY_REMOVE_STA = 0x19, /* not used */ - REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ - - /* RX, TX, LEDs */ - REPLY_3945_RX = 0x1b, /* 3945 only */ - REPLY_TX = 0x1c, - REPLY_RATE_SCALE = 0x47, /* 3945 only */ - REPLY_LEDS_CMD = 0x48, - REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */ - - /* 802.11h related */ - RADAR_NOTIFICATION = 0x70, /* not used */ - REPLY_QUIET_CMD = 0x71, /* not used */ - REPLY_CHANNEL_SWITCH = 0x72, - CHANNEL_SWITCH_NOTIFICATION = 0x73, - REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, - SPECTRUM_MEASURE_NOTIFICATION = 0x75, - - /* Power Management */ - POWER_TABLE_CMD = 0x77, - PM_SLEEP_NOTIFICATION = 0x7A, - PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, - - /* Scan commands and notifications */ - REPLY_SCAN_CMD = 0x80, - REPLY_SCAN_ABORT_CMD = 0x81, - SCAN_START_NOTIFICATION = 0x82, - SCAN_RESULTS_NOTIFICATION = 0x83, - SCAN_COMPLETE_NOTIFICATION = 0x84, - - /* IBSS/AP commands */ - BEACON_NOTIFICATION = 0x90, - REPLY_TX_BEACON = 0x91, - WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ - - /* Miscellaneous commands */ - QUIET_NOTIFICATION = 0x96, /* not used */ - REPLY_TX_PWR_TABLE_CMD = 0x97, - MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - - /* Bluetooth device coexistence config command */ - REPLY_BT_CONFIG = 0x9b, - - /* Statistics */ - REPLY_STATISTICS_CMD = 0x9c, - STATISTICS_NOTIFICATION = 0x9d, - - /* RF-KILL commands and notifications */ - REPLY_CARD_STATE_CMD = 0xa0, - CARD_STATE_NOTIFICATION = 0xa1, - - /* Missed beacons notification */ - MISSED_BEACONS_NOTIFICATION = 0xa2, - - REPLY_MAX = 0xff -}; - -/****************************************************************************** - * (0) - * Commonly used structures and definitions: - * Command header, txpower - * - *****************************************************************************/ - -/* iwl3945_cmd_header flags value */ -#define IWL_CMD_FAILED_MSK 0x40 - -/** - * struct iwl3945_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl3945_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 flags; /* IWL_CMD_* */ - /* - * The driver sets up the sequence number to values of its choosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_3945_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 index/position within Tx queue - * 8:13 Tx queue selection - * 14:14 driver sets this to indicate command is in the 'huge' - * storage at the end of the command buffers, i.e. scan cmd - * 15:15 uCode sets this in uCode-originated response/notification - */ - __le16 sequence; - - /* command or response/notification data follows immediately */ - u8 data[0]; -} __attribute__ ((packed)); - -/** - * struct iwl3945_tx_power - * - * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH - * - * Each entry contains two values: - * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained - * linear value that multiplies the output of the digital signal processor, - * before being sent to the analog radio. - * 2) Radio gain. This sets the analog gain of the radio Tx path. - * It is a coarser setting, and behaves in a logarithmic (dB) fashion. - * - * Driver obtains values from struct iwl3945_tx_power power_gain_table[][]. - */ -struct iwl3945_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); - -/** - * struct iwl3945_power_per_rate - * - * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - */ -struct iwl3945_power_per_rate { - u8 rate; /* plcp */ - struct iwl3945_tx_power tpc; - u8 reserved; -} __attribute__ ((packed)); - -/****************************************************************************** - * (0a) - * Alive and Error Commands & Responses: - * - *****************************************************************************/ - -#define UCODE_VALID_OK cpu_to_le32(0x1) -#define INITIALIZE_SUBTYPE (9) - -/* - * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) - * - * uCode issues this "initialize alive" notification once the initialization - * uCode image has completed its work, and is ready to load the runtime image. - * This is the *first* "alive" notification that the driver will receive after - * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. - * - * See comments documenting "BSM" (bootstrap state machine). - */ -struct iwl3945_init_alive_resp { - u8 ucode_minor; - u8 ucode_major; - __le16 reserved1; - u8 sw_rev[8]; - u8 ver_type; - u8 ver_subtype; /* "9" for initialize alive */ - __le16 reserved2; - __le32 log_event_table_ptr; - __le32 error_event_table_ptr; - __le32 timestamp; - __le32 is_valid; -} __attribute__ ((packed)); - - -/** - * REPLY_ALIVE = 0x1 (response only, not a command) - * - * uCode issues this "alive" notification once the runtime image is ready - * to receive commands from the driver. This is the *second* "alive" - * notification that the driver will receive after rebooting uCode; - * this "alive" is indicated by subtype field != 9. - * - * See comments documenting "BSM" (bootstrap state machine). - * - * This response includes two pointers to structures within the device's - * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: - * - * 1) log_event_table_ptr indicates base of the event log. This traces - * a 256-entry history of uCode execution within a circular buffer. - * - * 2) error_event_table_ptr indicates base of the error log. This contains - * information about any uCode error that occurs. - * - * The Linux driver can print both logs to the system log when a uCode error - * occurs. - */ -struct iwl3945_alive_resp { - u8 ucode_minor; - u8 ucode_major; - __le16 reserved1; - u8 sw_rev[8]; - u8 ver_type; - u8 ver_subtype; /* not "9" for runtime alive */ - __le16 reserved2; - __le32 log_event_table_ptr; /* SRAM address for event log */ - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 timestamp; - __le32 is_valid; -} __attribute__ ((packed)); - -union tsf { - u8 byte[8]; - __le16 word[4]; - __le32 dw[2]; -}; - -/* - * REPLY_ERROR = 0x2 (response only, not a command) - */ -struct iwl3945_error_resp { - __le32 error_type; - u8 cmd_id; - u8 reserved1; - __le16 bad_cmd_seq_num; - __le16 reserved2; - __le32 error_info; - union tsf timestamp; -} __attribute__ ((packed)); - -/****************************************************************************** - * (1) - * RXON Commands & Responses: - * - *****************************************************************************/ - -/* - * Rx config defines & structure - */ -/* rx_config device types */ -enum { - RXON_DEV_TYPE_AP = 1, - RXON_DEV_TYPE_ESS = 3, - RXON_DEV_TYPE_IBSS = 4, - RXON_DEV_TYPE_SNIFFER = 6, -}; - -/* rx_config flags */ -/* band & modulation selection */ -#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0) -#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1) -/* auto detection enable */ -#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2) -/* TGg protection when tx */ -#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3) -/* cck short slot & preamble */ -#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4) -#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5) -/* antenna selection */ -#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7) -#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00) -#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8) -#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9) -/* radar detection enable */ -#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12) -#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13) -/* rx response to host with 8-byte |