diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-scan.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-scan.c | 568 |
1 files changed, 0 insertions, 568 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c deleted file mode 100644 index a4b3663a262..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ /dev/null @@ -1,568 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-sta.h" -#include "iwl-io.h" -#include "iwl-helpers.h" - -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (20) - -#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) -#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 - - - -/** - * iwl_scan_cancel - Cancel any currently executing HW scan - * - * NOTE: priv->mutex is not required before calling this function - */ -int iwl_scan_cancel(struct iwl_priv *priv) -{ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCANNING, &priv->status); - return 0; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - if (!test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Queuing scan abort.\n"); - queue_work(priv->workqueue, &priv->abort_scan); - - } else - IWL_DEBUG_SCAN(priv, "Scan abort already in progress.\n"); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return 0; -} -EXPORT_SYMBOL(iwl_scan_cancel); -/** - * iwl_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - * NOTE: priv->mutex must be held before calling this function - */ -int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long now = jiffies; - int ret; - - ret = iwl_scan_cancel(priv); - if (ret && ms) { - mutex_unlock(&priv->mutex); - while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && - test_bit(STATUS_SCANNING, &priv->status)) - msleep(1); - mutex_lock(&priv->mutex); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return ret; -} -EXPORT_SYMBOL(iwl_scan_cancel_timeout); - -static int iwl_send_scan_abort(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rx_packet *pkt; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .flags = CMD_WANT_SKB, - }; - - /* If there isn't a scan actively going on in the hardware - * then we are in between scan bands and not actually - * actively scanning, so don't send the abort command */ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return 0; - } - - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return ret; - } - - pkt = (struct iwl_rx_packet *)cmd.reply_page; - if (pkt->u.status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", pkt->u.status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - } - - iwl_free_pages(priv, cmd.reply_page); - - return ret; -} - -/* Service response to REPLY_SCAN_CMD (0x80) */ -static void iwl_rx_reply_scan(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanreq_notification *notif = - (struct iwl_scanreq_notification *)pkt->u.raw; - - IWL_DEBUG_RX(priv, "Scan request status = 0x%x\n", notif->status); -#endif -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static void iwl_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanstart_notification *notif = - (struct iwl_scanstart_notification *)pkt->u.raw; - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN(priv, "Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - notif->status, notif->beacon_timer); -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static void iwl_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanresults_notification *notif = - (struct iwl_scanresults_notification *)pkt->u.raw; - - IWL_DEBUG_SCAN(priv, "Scan ch.res: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf); -#endif -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; - - IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); -#endif - - /* The HW is no longer scanning */ - clear_bit(STATUS_SCAN_HW, &priv->status); - - IWL_DEBUG_INFO(priv, "Scan on %sGHz took %dms\n", - (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", - jiffies_to_msecs(elapsed_jiffies - (priv->scan_start, jiffies))); - - /* - * If a request to abort was given, or the scan did not succeed - * then we reset the scan state machine and terminate, - * re-queuing another scan if one has been requested - */ - if (test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status)) - IWL_DEBUG_INFO(priv, "Aborted scan completed.\n"); - - IWL_DEBUG_INFO(priv, "Setting scan to off\n"); - - clear_bit(STATUS_SCANNING, &priv->status); - - queue_work(priv->workqueue, &priv->scan_completed); -} - -void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) -{ - /* scan handlers */ - priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl_rx_scan_complete_notif; -} -EXPORT_SYMBOL(iwl_setup_rx_scan_handlers); - -inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, - u8 n_probes) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52 + - IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); - else - return IWL_ACTIVE_DWELL_TIME_24 + - IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); -} -EXPORT_SYMBOL(iwl_get_active_dwell_time); - -u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, - struct ieee80211_vif *vif) -{ - u16 passive = (band == IEEE80211_BAND_2GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - if (iwl_is_associated(priv)) { - /* If we're associated, we clamp the maximum passive - * dwell time to be 98% of the beacon interval (minus - * 2 * channel tune time) */ - passive = vif ? vif->bss_conf.beacon_int : 0; - if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) - passive = IWL_PASSIVE_DWELL_BASE; - passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - } - - return passive; -} -EXPORT_SYMBOL(iwl_get_passive_dwell_time); - -void iwl_init_scan_params(struct iwl_priv *priv) -{ - u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1; - if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx; - if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; -} -EXPORT_SYMBOL(iwl_init_scan_params); - -static int iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - lockdep_assert_held(&priv->mutex); - - IWL_DEBUG_INFO(priv, "Starting scan...\n"); - set_bit(STATUS_SCANNING, &priv->status); - priv->is_internal_short_scan = false; - priv->scan_start = jiffies; - - if (WARN_ON(!priv->cfg->ops->utils->request_scan)) - return -EOPNOTSUPP; - - priv->cfg->ops->utils->request_scan(priv, vif); - - return 0; -} - -int iwl_mac_hw_scan(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_scan_request *req) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (req->n_channels == 0) - return -EINVAL; - - mutex_lock(&priv->mutex); - - if (!iwl_is_ready_rf(priv)) { - ret = -EIO; - IWL_DEBUG_MAC80211(priv, "leave - not ready or exit pending\n"); - goto out_unlock; - } - - if (test_bit(STATUS_SCANNING, &priv->status) && - !priv->is_internal_short_scan) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - ret = -EAGAIN; - goto out_unlock; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n"); - ret = -EAGAIN; - goto out_unlock; - } - - /* mac80211 will only ask for one band at a time */ - priv->scan_band = req->channels[0]->band; - priv->scan_request = req; - priv->scan_vif = vif; - - /* - * If an internal scan is in progress, just set - * up the scan_request as per above. - */ - if (priv->is_internal_short_scan) - ret = 0; - else - ret = iwl_scan_initiate(priv, vif); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - -out_unlock: - mutex_unlock(&priv->mutex); - - return ret; -} -EXPORT_SYMBOL(iwl_mac_hw_scan); - -/* - * internal short scan, this function should only been called while associated. - * It will reset and tune the radio to prevent possible RF related problem - */ -void iwl_internal_short_hw_scan(struct iwl_priv *priv) -{ - queue_work(priv->workqueue, &priv->start_internal_scan); -} - -void iwl_bg_start_internal_scan(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, start_internal_scan); - - mutex_lock(&priv->mutex); - - if (priv->is_internal_short_scan == true) { - IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n"); - goto unlock; - } - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_SCAN(priv, "not ready or exit pending\n"); - goto unlock; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - goto unlock; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n"); - goto unlock; - } - - priv->scan_band = priv->band; - - IWL_DEBUG_SCAN(priv, "Start internal short scan...\n"); - set_bit(STATUS_SCANNING, &priv->status); - priv->is_internal_short_scan = true; - - if (WARN_ON(!priv->cfg->ops->utils->request_scan)) - goto unlock; - - priv->cfg->ops->utils->request_scan(priv, NULL); - unlock: - mutex_unlock(&priv->mutex); -} -EXPORT_SYMBOL(iwl_bg_start_internal_scan); - -void iwl_bg_scan_check(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, scan_check.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - if (test_bit(STATUS_SCANNING, &priv->status) && - !test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan completion watchdog (%dms)\n", - jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - iwl_send_scan_abort(priv); - } - mutex_unlock(&priv->mutex); -} -EXPORT_SYMBOL(iwl_bg_scan_check); - -/** - * iwl_fill_probe_req - fill in all required fields and IE for probe request - */ - -u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, - const u8 *ta, const u8 *ies, int ie_len, int left) -{ - int len = 0; - u8 *pos = NULL; - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); - memcpy(frame->sa, ta, ETH_ALEN); - memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); - frame->seq_ctrl = 0; - - len += 24; - - /* ...next IE... */ - pos = &frame->u.probe_req.variable[0]; - - /* fill in our indirect SSID IE */ - left -= 2; - if (left < 0) - return 0; - *pos++ = WLAN_EID_SSID; - *pos++ = 0; - - len += 2; - - if (WARN_ON(left < ie_len)) - return len; - - if (ies && ie_len) { - memcpy(pos, ies, ie_len); - len += ie_len; - } - - return (u16)len; -} -EXPORT_SYMBOL(iwl_fill_probe_req); - -void iwl_bg_abort_scan(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); - - if (!test_bit(STATUS_READY, &priv->status) || - !test_bit(STATUS_GEO_CONFIGURED, &priv->status)) - return; - - cancel_delayed_work(&priv->scan_check); - - mutex_lock(&priv->mutex); - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) - iwl_send_scan_abort(priv); - mutex_unlock(&priv->mutex); -} -EXPORT_SYMBOL(iwl_bg_abort_scan); - -void iwl_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - bool internal = false; - - IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); - - cancel_delayed_work(&priv->scan_check); - - mutex_lock(&priv->mutex); - if (priv->is_internal_short_scan) { - priv->is_internal_short_scan = false; - IWL_DEBUG_SCAN(priv, "internal short scan completed\n"); - internal = true; - } else { - priv->scan_request = NULL; - priv->scan_vif = NULL; - } - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - goto out; - - if (internal && priv->scan_request) - iwl_scan_initiate(priv, priv->scan_vif); - - /* Since setting the TXPOWER may have been deferred while - * performing the scan, fire one off */ - iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); - - /* - * Since setting the RXON may have been deferred while - * performing the scan, fire one off if needed - */ - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwlcore_commit_rxon(priv); - - out: - mutex_unlock(&priv->mutex); - - /* - * Do not hold mutex here since this will cause mac80211 to call - * into driver again into functions that will attempt to take - * mutex. - */ - if (!internal) - ieee80211_scan_completed(priv->hw, false); -} -EXPORT_SYMBOL(iwl_bg_scan_completed); - -void iwl_setup_scan_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); - INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); - INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); - INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); -} -EXPORT_SYMBOL(iwl_setup_scan_deferred_work); - |