diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-power.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-power.c | 822 |
1 files changed, 699 insertions, 123 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index f2ea3f05f6e..4ec6a8307cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -36,25 +36,41 @@ #include "iwl-eeprom.h" #include "iwl-dev.h" #include "iwl-core.h" +#include "iwl-io.h" #include "iwl-commands.h" #include "iwl-debug.h" #include "iwl-power.h" /* - * Setting power level allow the card to go to sleep when not busy. + * Setting power level allows the card to go to sleep when not busy. * - * The power level is set to INDEX_1 (the least deep state) by - * default, and will, in the future, be the deepest state unless - * otherwise required by pm_qos network latency requirements. - * - * Using INDEX_1 without pm_qos is ok because mac80211 will disable - * PS when even checking every beacon for the TIM bit would exceed - * the required latency. + * We calculate a sleep command based on the required latency, which + * we get from mac80211. In order to handle thermal throttling, we can + * also use pre-defined power levels. */ -#define IWL_POWER_RANGE_0_MAX (2) -#define IWL_POWER_RANGE_1_MAX (10) +/* + * For now, keep using power level 1 instead of automatically + * adjusting ... + */ +bool no_sleep_autoadjust = true; +module_param(no_sleep_autoadjust, bool, S_IRUGO); +MODULE_PARM_DESC(no_sleep_autoadjust, + "don't automatically adjust sleep level " + "according to maximum network latency"); +/* + * This defines the old power levels. They are still used by default + * (level 1) and for thermal throttle (levels 3 through 5) + */ + +struct iwl_power_vec_entry { + struct iwl_powertable_cmd cmd; + u8 no_dtim; +}; + +#define IWL_DTIM_RANGE_0_MAX 2 +#define IWL_DTIM_RANGE_1_MAX 10 #define NOSLP cpu_to_le16(0), 0, 0 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 @@ -66,9 +82,8 @@ cpu_to_le32(X3), \ cpu_to_le32(X4)} /* default power management (not Tx power) table values */ -/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */ +/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */ static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { - {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, @@ -77,9 +92,8 @@ static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { }; -/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */ +/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { - {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, @@ -87,9 +101,8 @@ static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2} }; -/* for DTIM period > IWL_POWER_RANGE_1_MAX */ +/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { - {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, @@ -97,80 +110,29 @@ static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} }; - -/* set card power command */ -static int iwl_set_power(struct iwl_priv *priv, void *cmd) -{ - return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD, - sizeof(struct iwl_powertable_cmd), cmd); -} - -/* initialize to default */ -static void iwl_power_init_handle(struct iwl_priv *priv) -{ - struct iwl_power_mgr *pow_data; - int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM; - struct iwl_powertable_cmd *cmd; - int i; - u16 lctl; - - IWL_DEBUG_POWER(priv, "Initialize power \n"); - - pow_data = &priv->power_data; - - memset(pow_data, 0, sizeof(*pow_data)); - - memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); - memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); - memcpy(&pow_data->pwr_range_2[0], &range_2[0], size); - - lctl = iwl_pcie_link_ctl(priv); - - IWL_DEBUG_POWER(priv, "adjust power command flags\n"); - - for (i = 0; i < IWL_POWER_NUM; i++) { - cmd = &pow_data->pwr_range_0[i].cmd; - - if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN) - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - else - cmd->flags |= IWL_POWER_PCI_PM_MSK; - } -} - -/* adjust power command according to DTIM period and power level*/ -static int iwl_update_power_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd, u16 mode) +static void iwl_static_sleep_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd, + enum iwl_power_level lvl, int period) { - struct iwl_power_vec_entry *range; - struct iwl_power_mgr *pow_data; - int i; - u32 max_sleep = 0; - u8 period; + const struct iwl_power_vec_entry *table; + int max_sleep, i; bool skip; - if (mode > IWL_POWER_INDEX_5) { - IWL_DEBUG_POWER(priv, "Error invalid power mode \n"); - return -EINVAL; - } + table = range_2; + if (period < IWL_DTIM_RANGE_1_MAX) + table = range_1; + if (period < IWL_DTIM_RANGE_0_MAX) + table = range_0; - pow_data = &priv->power_data; + BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM); - if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX) - range = &pow_data->pwr_range_0[0]; - else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX) - range = &pow_data->pwr_range_1[0]; - else - range = &pow_data->pwr_range_2[0]; - - period = pow_data->dtim_period; - memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd)); + *cmd = table[lvl].cmd; if (period == 0) { - period = 1; skip = false; + period = 1; } else { - skip = !!range[mode].no_dtim; + skip = !!table[lvl].no_dtim; } if (skip) { @@ -178,7 +140,7 @@ static int iwl_update_power_cmd(struct iwl_priv *priv, max_sleep = le32_to_cpu(slp_itrvl); if (max_sleep == 0xFF) max_sleep = period * (skip + 1); - else if (max_sleep > period) + else if (max_sleep > period) max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; } else { @@ -190,6 +152,112 @@ static int iwl_update_power_cmd(struct iwl_priv *priv, if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) cmd->sleep_interval[i] = cpu_to_le32(max_sleep); + if (priv->power_data.pci_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + else + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1); +} + +/* default Thermal Throttling transaction table + * Current state | Throttling Down | Throttling Up + *============================================================================= + * Condition Nxt State Condition Nxt State Condition Nxt State + *----------------------------------------------------------------------------- + * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A + * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0 + * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1 + * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 + *============================================================================= + */ +static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104}, + {IWL_TI_1, 105, CT_KILL_THRESHOLD}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95}, + {IWL_TI_2, 110, CT_KILL_THRESHOLD}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD}, + {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}, + {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX} +}; + +/* Advance Thermal Throttling default restriction table */ +static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = { + {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true }, + {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true }, + {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false }, + {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false } +}; + + +static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + + if (priv->power_data.pci_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); +} + +static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd, + int dynps_ms, int wakeup_period) +{ + /* + * These are the original power level 3 sleep successions. The + * device may behave better with such succession and was also + * only tested with that. Just like the original sleep commands, + * also adjust the succession here to the wakeup_period below. + * The ranges are the same as for the sleep commands, 0-2, 3-9 + * and >10, which is selected based on the DTIM interval for + * the sleep index but here we use the wakeup period since that + * is what we need to do for the latency requirements. + */ + static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 }; + static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 }; + static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF }; + const u8 *slp_succ = slp_succ_r0; + int i; + + if (wakeup_period > IWL_DTIM_RANGE_0_MAX) + slp_succ = slp_succ_r1; + if (wakeup_period > IWL_DTIM_RANGE_1_MAX) + slp_succ = slp_succ_r2; + + memset(cmd, 0, sizeof(*cmd)); + + cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK | + IWL_POWER_FAST_PD; /* no use seeing frames for others */ + + if (priv->power_data.pci_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + + cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms); + cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms); + + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + cmd->sleep_interval[i] = + cpu_to_le32(min_t(int, slp_succ[i], wakeup_period)); + + IWL_DEBUG_POWER(priv, "Automatic sleep command\n"); +} + +static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) +{ + IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); @@ -200,79 +268,587 @@ static int iwl_update_power_cmd(struct iwl_priv *priv, le32_to_cpu(cmd->sleep_interval[3]), le32_to_cpu(cmd->sleep_interval[4])); - return 0; + return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD, + sizeof(struct iwl_powertable_cmd), cmd); } -/* - * compute the final power mode index - */ int iwl_power_update_mode(struct iwl_priv *priv, bool force) { - struct iwl_power_mgr *setting = &(priv->power_data); int ret = 0; - u16 uninitialized_var(final_mode); + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + bool enabled = (priv->iw_mode == NL80211_IFTYPE_STATION) && + (priv->hw->conf.flags & IEEE80211_CONF_PS); bool update_chains; + struct iwl_powertable_cmd cmd; + int dtimper; /* Don't update the RX chain when chain noise calibration is running */ update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; - final_mode = priv->power_data.user_power_setting; - - if (setting->power_disabled) - final_mode = IWL_POWER_MODE_CAM; + if (priv->vif) + dtimper = priv->vif->bss_conf.dtim_period; + else + dtimper = 1; + + /* TT power setting overwrites everything */ + if (tt->state >= IWL_TI_1) + iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper); + else if (!enabled) + iwl_power_sleep_cam_cmd(priv, &cmd); + else if (priv->power_data.debug_sleep_level_override >= 0) + iwl_static_sleep_cmd(priv, &cmd, + priv->power_data.debug_sleep_level_override, + dtimper); + else if (no_sleep_autoadjust) + iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper); + else + iwl_power_fill_sleep_cmd(priv, &cmd, + priv->hw->conf.dynamic_ps_timeout, + priv->hw->conf.max_sleep_period); if (iwl_is_ready_rf(priv) && - ((setting->power_mode != final_mode) || force)) { - struct iwl_powertable_cmd cmd; - - if (final_mode != IWL_POWER_MODE_CAM) + (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) { + if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) set_bit(STATUS_POWER_PMI, &priv->status); - iwl_update_power_cmd(priv, &cmd, final_mode); - cmd.keep_alive_beacons = 0; - - if (final_mode == IWL_POWER_INDEX_5) - cmd.flags |= IWL_POWER_FAST_PD; - ret = iwl_set_power(priv, &cmd); - - if (final_mode == IWL_POWER_MODE_CAM) - clear_bit(STATUS_POWER_PMI, &priv->status); - - if (priv->cfg->ops->lib->update_chain_flags && update_chains) - priv->cfg->ops->lib->update_chain_flags(priv); - else - IWL_DEBUG_POWER(priv, "Cannot update the power, chain noise " + if (!ret) { + if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) + clear_bit(STATUS_POWER_PMI, &priv->status); + + if (priv->cfg->ops->lib->update_chain_flags && + update_chains) + priv->cfg->ops->lib->update_chain_flags(priv); + else if (priv->cfg->ops->lib->update_chain_flags) + IWL_DEBUG_POWER(priv, + "Cannot update the power, chain noise " "calibration running: %d\n", priv->chain_noise_data.state); - if (!ret) - setting->power_mode = final_mode; + memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)); + } else + IWL_ERR(priv, "set power fail, ret = %d", ret); } return ret; } EXPORT_SYMBOL(iwl_power_update_mode); -/* set user_power_setting */ -int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode) +bool iwl_ht_enabled(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + + if (!priv->thermal_throttle.advanced_tt) + return true; + restriction = tt->restriction + tt->state; + return restriction->is_ht; +} +EXPORT_SYMBOL(iwl_ht_enabled); + +enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv) { - if (mode >= IWL_POWER_NUM) - return -EINVAL; + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; - priv->power_data.user_power_setting = mode; + if (!priv->thermal_throttle.advanced_tt) + return IWL_ANT_OK_MULTI; + restriction = tt->restriction + tt->state; + return restriction->tx_stream; +} +EXPORT_SYMBOL(iwl_tx_ant_restriction); + +enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + + if (!priv->thermal_throttle.advanced_tt) + return IWL_ANT_OK_MULTI; + restriction = tt->restriction + tt->state; + return restriction->rx_stream; +} + +#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */ + +/* + * toggle the bit to wake up uCode and check the temperature + * if the temperature is below CT, uCode will stay awake and send card + * state notification with CT_KILL bit clear to inform Thermal Throttling + * Management to change state. Otherwise, uCode will go back to sleep + * without doing anything, driver should continue the 5 seconds timer + * to wake up uCode for temperature check until temperature drop below CT + */ +static void iwl_tt_check_exit_ct_kill(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + unsigned long flags; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (tt->state == IWL_TI_CT_KILL) { + if (priv->thermal_throttle.ct_kill_toggle) { + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + priv->thermal_throttle.ct_kill_toggle = false; + } else { + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + priv->thermal_throttle.ct_kill_toggle = true; + } + iwl_read32(priv, CSR_UCODE_DRV_GP1); + spin_lock_irqsave(&priv->reg_lock, flags); + if (!iwl_grab_nic_access(priv)) + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->reg_lock, flags); + + /* Reschedule the ct_kill timer to occur in + * CT_KILL_EXIT_DURATION seconds to ensure we get a + * thermal update */ + mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies + + CT_KILL_EXIT_DURATION * HZ); + } +} + +static void iwl_perform_ct_kill_task(struct iwl_priv *priv, + bool stop) +{ + if (stop) { + IWL_DEBUG_POWER(priv, "Stop all queues\n"); + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + IWL_DEBUG_POWER(priv, + "Schedule 5 seconds CT_KILL Timer\n"); + mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies + + CT_KILL_EXIT_DURATION * HZ); + } else { + IWL_DEBUG_POWER(priv, "Wake all queues\n"); + if (priv->mac80211_registered) + ieee80211_wake_queues(priv->hw); + } +} + +#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY) +#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100) +#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90) + +/* + * Legacy thermal throttling + * 1) Avoid NIC destruction due to high temperatures + * Chip will identify dangerously high temperatures that can + * harm the device and will power down + * 2) Avoid the NIC power down due to high temperature + * Throttle early enough to lower the power consumption before + * drastic steps are needed + */ +static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + enum iwl_tt_state old_state; + +#ifdef CONFIG_IWLWIFI_DEBUG + if ((tt->tt_previous_temp) && + (temp > tt->tt_previous_temp) && + ((temp - tt->tt_previous_temp) > + IWL_TT_INCREASE_MARGIN)) { + IWL_DEBUG_POWER(priv, + "Temperature increase %d degree Celsius\n", + (temp - tt->tt_previous_temp)); + } +#endif + old_state = tt->state; + /* in Celsius */ + if (temp >= IWL_MINIMAL_POWER_THRESHOLD) + tt->state = IWL_TI_CT_KILL; + else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2) + tt->state = IWL_TI_2; + else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1) + tt->state = IWL_TI_1; + else + tt->state = IWL_TI_0; + +#ifdef CONFIG_IWLWIFI_DEBUG + tt->tt_previous_temp = temp; +#endif + if (tt->state != old_state) { + switch (tt->state) { + case IWL_TI_0: + /* + * When the system is ready to go back to IWL_TI_0 + * we only have to call iwl_power_update_mode() to + * do so. + */ + break; + case IWL_TI_1: + tt->tt_power_mode = IWL_POWER_INDEX_3; + break; + case IWL_TI_2: + tt->tt_power_mode = IWL_POWER_INDEX_4; + break; + default: + tt->tt_power_mode = IWL_POWER_INDEX_5; + break; + } + mutex_lock(&priv->mutex); + if (iwl_power_update_mode(priv, true)) { + /* TT state not updated + * try again during next temperature read + */ + tt->state = old_state; + IWL_ERR(priv, "Cannot update power mode, " + "TT state not updated\n"); + } else { + if (tt->state == IWL_TI_CT_KILL) + iwl_perform_ct_kill_task(priv, true); + else if (old_state == IWL_TI_CT_KILL && + tt->state != IWL_TI_CT_KILL) + iwl_perform_ct_kill_task(priv, false); + IWL_DEBUG_POWER(priv, "Temperature state changed %u\n", + tt->state); + IWL_DEBUG_POWER(priv, "Power Index change to %u\n", + tt->tt_power_mode); + } + mutex_unlock(&priv->mutex); + } +} - return iwl_power_update_mode(priv, 0); +/* + * Advance thermal throttling + * 1) Avoid NIC destruction due to high temperatures + * Chip will identify dangerously high temperatures that can + * harm the device and will power down + * 2) Avoid the NIC power down due to high temperature + * Throttle early enough to lower the power consumption before + * drastic steps are needed + * Actions include relaxing the power down sleep thresholds and + * decreasing the number of TX streams + * 3) Avoid throughput performance impact as much as possible + * + *============================================================================= + * Condition Nxt State Condition Nxt State Condition Nxt State + *----------------------------------------------------------------------------- + * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A + * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0 + * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1 + * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 + *============================================================================= + */ +static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + int i; + bool changed = false; + enum iwl_tt_state old_state; + struct iwl_tt_trans *transaction; + + old_state = tt->state; + for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) { + /* based on the current TT state, + * find the curresponding transaction table + * each table has (IWL_TI_STATE_MAX - 1) entries + * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1)) + * will advance to the correct table. + * then based on the current temperature + * find the next state need to transaction to + * go through all the possible (IWL_TI_STATE_MAX - 1) entries + * in the current table to see if transaction is needed + */ + transaction = tt->transaction + + ((old_state * (IWL_TI_STATE_MAX - 1)) + i); + if (temp >= transaction->tt_low && + temp <= transaction->tt_high) { +#ifdef CONFIG_IWLWIFI_DEBUG + if ((tt->tt_previous_temp) && + (temp > tt->tt_previous_temp) && + ((temp - tt->tt_previous_temp) > + IWL_TT_INCREASE_MARGIN)) { + IWL_DEBUG_POWER(priv, + "Temperature increase %d " + "degree Celsius\n", + (temp - tt->tt_previous_temp)); + } + tt->tt_previous_temp = temp; +#endif + if (old_state != + transaction->next_state) { + changed = true; + tt->state = + transaction->next_state; + } + break; + } + } + if (changed) { + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + + if (tt->state >= IWL_TI_1) { + /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */ + tt->tt_power_mode = IWL_POWER_INDEX_5; + if (!iwl_ht_enabled(priv)) + /* disable HT */ + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | + RXON_FLG_HT40_PROT_MSK | + RXON_FLG_HT_PROT_MSK); + else { + /* check HT capability and set + * according to the system HT capability + * in case get disabled before */ + iwl_set_rxon_ht(priv, &priv->current_ht_config); + } + + } else { + /* + * restore system power setting -- it will be + * recalculated automatically. + */ + + /* check HT capability and set + * according to the system HT capability + * in case get disabled before */ + iwl_set_rxon_ht(priv, &priv->current_ht_config); + } + mutex_lock(&priv->mutex); + if (iwl_power_update_mode(priv, true)) { + /* TT state not updated + * try again during next temperature read + */ + IWL_ERR(priv, "Cannot update power mode, " + "TT state not updated\n"); + tt->state = old_state; + } else { + IWL_DEBUG_POWER(priv, + "Thermal Throttling to new state: %u\n", + tt->state); + if (old_state != IWL_TI_CT_KILL && + tt->state == IWL_TI_CT_KILL) { + IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n"); + iwl_perform_ct_kill_task(priv, true); + + } else if (old_state == IWL_TI_CT_KILL && + tt->state != IWL_TI_CT_KILL) { + IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n"); + iwl_perform_ct_kill_task(priv, false); + } + } + mutex_unlock(&priv->mutex); + } +} + +/* Card State Notification indicated reach critical temperature + * if PSP not enable, no Thermal Throttling function will be performed + * just set the GP1 bit to acknowledge the event + * otherwise, go into IWL_TI_CT_KILL state + * since Card State Notification will not provide any temperature reading + * for Legacy mode + * so just pass the CT_KILL temperature to iwl_legacy_tt_handler() + * for advance mode + * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state + */ +static void iwl_bg_ct_enter(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter); + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!iwl_is_ready(priv)) + return; + + if (tt->state != IWL_TI_CT_KILL) { + IWL_ERR(priv, "Device reached critical temperature " + "- ucode going to sleep!\n"); + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, + IWL_MINIMAL_POWER_THRESHOLD); + else + iwl_advance_tt_handler(priv, + CT_KILL_THRESHOLD + 1); + } } -EXPORT_SYMBOL(iwl_power_set_user_mode); + +/* Card State Notification indicated out of critical temperature + * since Card State Notification will not provide any temperature reading + * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature + * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state + */ +static void iwl_bg_ct_exit(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit); + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!iwl_is_ready(priv)) + return; + + /* stop ct_kill_exit_tm timer */ + del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); + + if (tt->state == IWL_TI_CT_KILL) { + IWL_ERR(priv, + "Device temperature below critical" + "- ucode awake!\n"); + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, + IWL_REDUCED_PERFORMANCE_THRESHOLD_2); + else + iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD); + } +} + +void iwl_tt_enter_ct_kill(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n"); + queue_work(priv->workqueue, &priv->ct_enter); +} +EXPORT_SYMBOL(iwl_tt_enter_ct_kill); + +void iwl_tt_exit_ct_kill(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n"); + queue_work(priv->workqueue, &priv->ct_exit); +} +EXPORT_SYMBOL(iwl_tt_exit_ct_kill); + +static void iwl_bg_tt_work(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work); + s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */ + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) + temp = KELVIN_TO_CELSIUS(priv->temperature); + + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, temp); + else + iwl_advance_tt_handler(priv, temp); +} + +void iwl_tt_handler(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n"); + queue_work(priv->workqueue, &priv->tt_work); +} +EXPORT_SYMBOL(iwl_tt_handler); + +/* Thermal throttling initialization + * For advance thermal throttling: + * Initialize Thermal Index and temperature threshold table + * Initialize thermal throttling restriction table + */ +void iwl_tt_initialize(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1); + struct iwl_tt_trans *transaction; + + IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n"); + + memset(tt, 0, sizeof(struct iwl_tt_mgmt)); + + tt->state = IWL_TI_0; + init_timer(&priv->thermal_throttle.ct_kill_exit_tm); + priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv; + priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill; + + /* setup deferred ct kill work */ + INIT_WORK(&priv->tt_work, iwl_bg_tt_work); + INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter); + INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit); + + switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_6x00: + case CSR_HW_REV_TYPE_6x50: + IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n"); + tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) * + IWL_TI_STATE_MAX, GFP_KERNEL); + tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) * + IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1), + GFP_KERNEL); + if (!tt->restriction || !tt->transaction) { + IWL_ERR(priv, "Fallback to Legacy Throttling\n"); + priv->thermal_throttle.advanced_tt = false; + kfree(tt->restriction); + tt->restriction = NULL; + kfree(tt->transaction); + tt->transaction = NULL; + } else { + transaction = tt->transaction + + (IWL_TI_0 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_0[0], size); + transaction = tt->transaction + + (IWL_TI_1 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_1[0], size); + transaction = tt->transaction + + (IWL_TI_2 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_2[0], size); + transaction = tt->transaction + + (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_3[0], size); + size = sizeof(struct iwl_tt_restriction) * + IWL_TI_STATE_MAX; + memcpy(tt->restriction, + &restriction_range[0], size); + priv->thermal_throttle.advanced_tt = true; + } + break; + default: + IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n"); + priv->thermal_throttle.advanced_tt = false; + break; + } +} +EXPORT_SYMBOL(iwl_tt_initialize); + +/* cleanup thermal throttling management related memory and timer */ +void iwl_tt_exit(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + /* stop ct_kill_exit_tm timer if activated */ + del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); + cancel_work_sync(&priv->tt_work); + cancel_work_sync(&priv->ct_enter); + cancel_work_sync(&priv->ct_exit); + + if (priv->thermal_throttle.advanced_tt) { + /* free advance thermal throttling memory */ + kfree(tt->restriction); + tt->restriction = NULL; + kfree(tt->transaction); + tt->transaction = NULL; + } +} +EXPORT_SYMBOL(iwl_tt_exit); /* initialize to default */ void iwl_power_initialize(struct iwl_priv *priv) { - iwl_power_init_handle(priv); - priv->power_data.user_power_setting = IWL_POWER_INDEX_1; - /* default to disabled until mac80211 says otherwise */ - priv->power_data.power_disabled = 1; + u16 lctl = iwl_pcie_link_ctl(priv); + + priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN); + + priv->power_data.debug_sleep_level_override = -1; + + memset(&priv->power_data.sleep_cmd, 0, + sizeof(priv->power_data.sleep_cmd)); } EXPORT_SYMBOL(iwl_power_initialize); |