diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom.h | 124 |
1 files changed, 104 insertions, 20 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 195b4ef12c2..6b68db7b1b8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -88,10 +88,10 @@ struct iwl_priv; * requirement for establishing a new network for legal operation on channels * requiring RADAR detection or restricting ACTIVE scanning. * - * NOTE: "WIDE" flag does not indicate anything about "FAT" 40 MHz channels. - * It only indicates that 20 MHz channel use is supported; FAT channel + * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. + * It only indicates that 20 MHz channel use is supported; HT40 channel * usage is indicated by a separate set of regulatory flags for each - * FAT channel pair. + * HT40 channel pair. * * NOTE: Using a channel inappropriately will result in a uCode error! */ @@ -112,12 +112,36 @@ enum { #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1) /* *regulatory* channel data format in eeprom, one for each channel. - * There are separate entries for FAT (40 MHz) vs. normal (20 MHz) channels. */ + * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ struct iwl_eeprom_channel { u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __attribute__ ((packed)); +/** + * iwl_eeprom_enhanced_txpwr structure + * This structure presents the enhanced regulatory tx power limit layout + * in eeprom image + * Enhanced regulatory tx power portion of eeprom image can be broken down + * into individual structures; each one is 8 bytes in size and contain the + * following information + * @chain_a_max_pwr: chain a max power in 1/2 dBm + * @chain_b_max_pwr: chain b max power in 1/2 dBm + * @chain_c_max_pwr: chain c max power in 1/2 dBm + * @mimo2_max_pwr: mimo2 max power in 1/2 dBm + * @mimo3_max_pwr: mimo3 max power in 1/2 dBm + * + */ +struct iwl_eeprom_enhanced_txpwr { + u16 reserved; + s8 chain_a_max; + s8 chain_b_max; + s8 chain_c_max; + s8 reserved1; + s8 mimo2_max; + s8 mimo3_max; +} __attribute__ ((packed)); + /* 3945 Specific */ #define EEPROM_3945_EEPROM_VERSION (0x2f) @@ -170,18 +194,77 @@ struct iwl_eeprom_channel { | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ #define EEPROM_5000_REG_BAND_5_CHANNELS ((0x74)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ -#define EEPROM_5000_REG_BAND_24_FAT_CHANNELS ((0x82)\ +#define EEPROM_5000_REG_BAND_24_HT40_CHANNELS ((0x82)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ -#define EEPROM_5000_REG_BAND_52_FAT_CHANNELS ((0x92)\ +#define EEPROM_5000_REG_BAND_52_HT40_CHANNELS ((0x92)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ +/* 6000 and up regulatory tx power - indirect access */ +/* max. elements per section */ +#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8) +#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2) + +/** + * Partition the enhanced tx power portion of eeprom image into + * 10 sections based on band, modulation, frequency and channel + * + * Section 1: all CCK channels + * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels + * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels + * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT + * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_) + * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT + * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_) + * Section 8: 2.4 GHz channel 13, Both Legacy and HT + * Section 9: 2.4 GHz channel 140, Both Legacy and HT + * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_) + */ +/* 2.4 GHz band: CCK */ +#define EEPROM_LB_CCK_20_COMMON ((0xAA)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */ +/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ +#define EEPROM_LB_OFDM_COMMON ((0xB2)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ +/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ +#define EEPROM_HB_OFDM_COMMON ((0xCA)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ +/* 2.4GHz band channels: + * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */ +#define EEPROM_LB_OFDM_20_BAND ((0xE2)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */ +/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */ +#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */ +/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */ +#define EEPROM_HB_OFDM_20_BAND ((0x14A)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */ +/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */ +#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ +/* 2.4 GHz band, channnel 13: Legacy, HT */ +#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ +/* 5.2 GHz band, channnel 140: Legacy, HT */ +#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ +/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */ +#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ + + /* 5050 Specific */ #define EEPROM_5050_TX_POWER_VERSION (4) #define EEPROM_5050_EEPROM_VERSION (0x21E) /* OTP */ -#define OTP_LOWER_BLOCKS_TOTAL (3) -#define OTP_BLOCK_SIZE (0x400) +/* lower blocks contain EEPROM image and calibration data */ +#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ +/* high blocks contain PAPD data */ +#define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */ +#define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */ +#define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */ +#define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */ +#define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */ /* 2.4 GHz */ extern const u8 iwl_eeprom_band_1[14]; @@ -313,7 +396,7 @@ struct iwl_eeprom_calib_info { * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory * txpower (MSB). * - * Entries immediately below are for 20 MHz channel width. FAT (40 MHz) + * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) * channels (only for 4965, not supported by 3945) appear later in the EEPROM. * * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 @@ -352,29 +435,29 @@ struct iwl_eeprom_calib_info { #define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ /* - * 2.4 GHz FAT channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) + * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) * * The channel listed is the center of the lower 20 MHz half of the channel. * The overall center frequency is actually 2 channels (10 MHz) above that, - * and the upper half of each FAT channel is centered 4 channels (20 MHz) away - * from the lower half; e.g. the upper half of FAT channel 1 is channel 5, - * and the overall FAT channel width centers on channel 3. + * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away + * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5, + * and the overall HT40 channel width centers on channel 3. * * NOTE: The RXON command uses 20 MHz channel numbers to specify the * control channel to which to tune. RXON also specifies whether the - * control channel is the upper or lower half of a FAT channel. + * control channel is the upper or lower half of a HT40 channel. * - * NOTE: 4965 does not support FAT channels on 2.4 GHz. + * NOTE: 4965 does not support HT40 channels on 2.4 GHz. */ -#define EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS (2*0xA0) /* 14 bytes */ +#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */ /* - * 5.2 GHz FAT channels 36 (40), 44 (48), 52 (56), 60 (64), + * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64), * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) */ -#define EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS (2*0xA8) /* 22 bytes */ +#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */ -#define EEPROM_REGULATORY_BAND_NO_FAT (0) +#define EEPROM_REGULATORY_BAND_NO_HT40 (0) struct iwl_eeprom_ops { const u32 regulatory_bands[7]; @@ -383,6 +466,7 @@ struct iwl_eeprom_ops { void (*release_semaphore) (struct iwl_priv *priv); u16 (*calib_version) (struct iwl_priv *priv); const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset); + void (*update_enhanced_txpower) (struct iwl_priv *priv); }; @@ -397,7 +481,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv); void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv); const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); - +void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv); int iwl_init_channel_map(struct iwl_priv *priv); void iwl_free_channel_map(struct iwl_priv *priv); const struct iwl_channel_info *iwl_get_channel_info( |