diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-4965-hw.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 203 |
1 files changed, 13 insertions, 190 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index f4793a60944..6649f7b5565 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -25,7 +25,7 @@ * in the file called LICENSE.GPL. * * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Linux Wireless <ilw@linux.intel.com> * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE @@ -71,7 +71,7 @@ #include "iwl-fh.h" -/* EERPROM */ +/* EEPROM */ #define IWL4965_EEPROM_IMG_SIZE 1024 /* @@ -84,12 +84,6 @@ #define IWL_CMD_FIFO_NUM 4 #define IWL49_FIRST_AMPDU_QUEUE 7 -/* Tx rates */ -#define IWL_CCK_RATES 4 -#define IWL_OFDM_RATES 8 -#define IWL_HT_RATES 16 -#define IWL_MAX_RATES (IWL_CCK_RATES+IWL_OFDM_RATES+IWL_HT_RATES) - /* Time constants */ #define SHORT_SLOT_TIME 9 #define LONG_SLOT_TIME 20 @@ -111,7 +105,6 @@ #define PCI_CFG_CMD_REG_INT_DIS_MSK 0x04 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) -#define TFD_QUEUE_SIZE_MAX (256) #define IWL_NUM_SCAN_RATES (2) @@ -287,13 +280,13 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * that target txpower. * * - * 3) Determine (EEPROM) calibration subband for the target channel, by - * comparing against first and last channels in each subband + * 3) Determine (EEPROM) calibration sub band for the target channel, by + * comparing against first and last channels in each sub band * (see struct iwl4965_eeprom_calib_subband_info). * * * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, - * referencing the 2 factory-measured (sample) channels within the subband. + * referencing the 2 factory-measured (sample) channels within the sub band. * * Interpolation is based on difference between target channel's frequency * and the sample channels' frequencies. Since channel numbers are based @@ -301,7 +294,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * to interpolating based on channel number differences. * * Note that the sample channels may or may not be the channels at the - * edges of the subband. The target channel may be "outside" of the + * edges of the sub band. The target channel may be "outside" of the * span of the sampled channels. * * Driver may choose the pair (for 2 Tx chains) of measurements (see @@ -345,7 +338,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * "4965 temperature calculation". * * If current temperature is higher than factory temperature, driver must - * increase gain (lower gain table index), and vice versa. + * increase gain (lower gain table index), and vice verse. * * Temperature affects gain differently for different channels: * @@ -815,125 +808,14 @@ enum { * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array * in DRAM containing 256 Transmit Frame Descriptors (TFDs). */ -#define IWL49_MAX_WIN_SIZE 64 -#define IWL49_QUEUE_SIZE 256 #define IWL49_NUM_FIFOS 7 #define IWL49_CMD_FIFO_NUM 4 #define IWL49_NUM_QUEUES 16 #define IWL49_NUM_AMPDU_QUEUES 8 -/** - * struct iwl_tfd_frame_data - * - * Describes up to 2 buffers containing (contiguous) portions of a Tx frame. - * Each buffer must be on dword boundary. - * Up to 10 iwl_tfd_frame_data structures, describing up to 20 buffers, - * may be filled within a TFD (iwl_tfd_frame). - * - * Bit fields in tb1_addr: - * 31- 0: Tx buffer 1 address bits [31:0] - * - * Bit fields in val1: - * 31-16: Tx buffer 2 address bits [15:0] - * 15- 4: Tx buffer 1 length (bytes) - * 3- 0: Tx buffer 1 address bits [32:32] - * - * Bit fields in val2: - * 31-20: Tx buffer 2 length (bytes) - * 19- 0: Tx buffer 2 address bits [35:16] - */ -struct iwl_tfd_frame_data { - __le32 tb1_addr; - - __le32 val1; - /* __le32 ptb1_32_35:4; */ -#define IWL_tb1_addr_hi_POS 0 -#define IWL_tb1_addr_hi_LEN 4 -#define IWL_tb1_addr_hi_SYM val1 - /* __le32 tb_len1:12; */ -#define IWL_tb1_len_POS 4 -#define IWL_tb1_len_LEN 12 -#define IWL_tb1_len_SYM val1 - /* __le32 ptb2_0_15:16; */ -#define IWL_tb2_addr_lo16_POS 16 -#define IWL_tb2_addr_lo16_LEN 16 -#define IWL_tb2_addr_lo16_SYM val1 - - __le32 val2; - /* __le32 ptb2_16_35:20; */ -#define IWL_tb2_addr_hi20_POS 0 -#define IWL_tb2_addr_hi20_LEN 20 -#define IWL_tb2_addr_hi20_SYM val2 - /* __le32 tb_len2:12; */ -#define IWL_tb2_len_POS 20 -#define IWL_tb2_len_LEN 12 -#define IWL_tb2_len_SYM val2 -} __attribute__ ((packed)); - /** - * struct iwl_tfd_frame - * - * Transmit Frame Descriptor (TFD) - * - * 4965 supports up to 16 Tx queues resident in host DRAM. - * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. - * Both driver and device share these circular buffers, each of which must be - * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes for 4965. - * - * Driver must indicate the physical address of the base of each - * circular buffer via the 4965's FH_MEM_CBBC_QUEUE registers. - * - * Each TFD contains pointer/size information for up to 20 data buffers - * in host DRAM. These buffers collectively contain the (one) frame described - * by the TFD. Each buffer must be a single contiguous block of memory within - * itself, but buffers may be scattered in host DRAM. Each buffer has max size - * of (4K - 4). The 4965 concatenates all of a TFD's buffers into a single - * Tx frame, up to 8 KBytes in size. - * - * Bit fields in the control dword (val0): - * 31-30: # dwords (0-3) of padding required at end of frame for 16-byte bound - * 29: reserved - * 28-24: # Transmit Buffer Descriptors in TFD - * 23- 0: reserved - * - * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. - */ -struct iwl_tfd_frame { - __le32 val0; - /* __le32 rsvd1:24; */ - /* __le32 num_tbs:5; */ -#define IWL_num_tbs_POS 24 -#define IWL_num_tbs_LEN 5 -#define IWL_num_tbs_SYM val0 - /* __le32 rsvd2:1; */ - /* __le32 padding:2; */ - struct iwl_tfd_frame_data pa[10]; - __le32 reserved; -} __attribute__ ((packed)); - - -/** - * struct iwl4965_queue_byte_cnt_entry - * - * Byte Count Table Entry - * - * Bit fields: - * 15-12: reserved - * 11- 0: total to-be-transmitted byte count of frame (does not include command) - */ -struct iwl4965_queue_byte_cnt_entry { - __le16 val; - /* __le16 byte_cnt:12; */ -#define IWL_byte_cnt_POS 0 -#define IWL_byte_cnt_LEN 12 -#define IWL_byte_cnt_SYM val - /* __le16 rsvd:4; */ -} __attribute__ ((packed)); - - -/** - * struct iwl4965_sched_queue_byte_cnt_tbl + * struct iwl4965_schedq_bc_tbl * * Byte Count table * @@ -947,71 +829,12 @@ struct iwl4965_queue_byte_cnt_entry { * count table for the chosen Tx queue. If the TFD index is 0-63, the driver * must duplicate the byte count entry in corresponding index 256-319. * - * "dont_care" padding puts each byte count table on a 1024-byte boundary; + * padding puts each byte count table on a 1024-byte boundary; * 4965 assumes tables are separated by 1024 bytes. */ -struct iwl4965_sched_queue_byte_cnt_tbl { - struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL49_QUEUE_SIZE + - IWL49_MAX_WIN_SIZE]; - u8 dont_care[1024 - - (IWL49_QUEUE_SIZE + IWL49_MAX_WIN_SIZE) * - sizeof(__le16)]; -} __attribute__ ((packed)); - - -/** - * struct iwl4965_shared - handshake area for Tx and Rx - * - * For convenience in allocating memory, this structure combines 2 areas of - * DRAM which must be shared between driver and 4965. These do not need to - * be combined, if better allocation would result from keeping them separate: - * - * 1) The Tx byte count tables occupy 1024 bytes each (16 KBytes total for - * 16 queues). Driver uses SCD_DRAM_BASE_ADDR to tell 4965 where to find - * the first of these tables. 4965 assumes tables are 1024 bytes apart. - * - * 2) The Rx status (val0 and val1) occupies only 8 bytes. Driver uses - * FH_RSCSR_CHNL0_STTS_WPTR_REG to tell 4965 where to find this area. - * Driver reads val0 to determine the latest Receive Buffer Descriptor (RBD) - * that has been filled by the 4965. - * - * Bit fields val0: - * 31-12: Not used - * 11- 0: Index of last filled Rx buffer descriptor (4965 writes, driver reads) - * - * Bit fields val1: - * 31- 0: Not used - */ -struct iwl4965_shared { - struct iwl4965_sched_queue_byte_cnt_tbl - queues_byte_cnt_tbls[IWL49_NUM_QUEUES]; - __le32 rb_closed; - - /* __le32 rb_closed_stts_rb_num:12; */ -#define IWL_rb_closed_stts_rb_num_POS 0 -#define IWL_rb_closed_stts_rb_num_LEN 12 -#define IWL_rb_closed_stts_rb_num_SYM rb_closed - /* __le32 rsrv1:4; */ - /* __le32 rb_closed_stts_rx_frame_num:12; */ -#define IWL_rb_closed_stts_rx_frame_num_POS 16 -#define IWL_rb_closed_stts_rx_frame_num_LEN 12 -#define IWL_rb_closed_stts_rx_frame_num_SYM rb_closed - /* __le32 rsrv2:4; */ - - __le32 frm_finished; - /* __le32 frame_finished_stts_rb_num:12; */ -#define IWL_frame_finished_stts_rb_num_POS 0 -#define IWL_frame_finished_stts_rb_num_LEN 12 -#define IWL_frame_finished_stts_rb_num_SYM frm_finished - /* __le32 rsrv3:4; */ - /* __le32 frame_finished_stts_rx_frame_num:12; */ -#define IWL_frame_finished_stts_rx_frame_num_POS 16 -#define IWL_frame_finished_stts_rx_frame_num_LEN 12 -#define IWL_frame_finished_stts_rx_frame_num_SYM frm_finished - /* __le32 rsrv4:4; */ - - __le32 padding1; /* so that allocation will be aligned to 16B */ - __le32 padding2; +struct iwl4965_scd_bc_tbl { + __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; + u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; } __attribute__ ((packed)); -#endif /* __iwl4965_4965_hw_h__ */ +#endif /* !__iwl_4965_hw_h__ */ |