diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-4965.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-4965.c | 2188 |
1 files changed, 2188 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c new file mode 100644 index 00000000000..f5433c74b84 --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -0,0 +1,2188 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/mac80211.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-4965-calib.h" +#include "iwl-sta.h" +#include "iwl-4965-led.h" +#include "iwl-4965.h" +#include "iwl-4965-debugfs.h" + +static int iwl4965_send_tx_power(struct iwl_priv *priv); +static int iwl4965_hw_get_temperature(struct iwl_priv *priv); + +/* Highest firmware API version supported */ +#define IWL4965_UCODE_API_MAX 2 + +/* Lowest firmware API version supported */ +#define IWL4965_UCODE_API_MIN 2 + +#define IWL4965_FW_PRE "iwlwifi-4965-" +#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode" +#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api) + +/* check contents of special bootstrap uCode SRAM */ +static int iwl4965_verify_bsm(struct iwl_priv *priv) +{ + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + u32 reg; + u32 val; + + IWL_DEBUG_INFO(priv, "Begin verify bsm\n"); + + /* verify BSM SRAM contents */ + val = iwl_legacy_read_prph(priv, BSM_WR_DWCOUNT_REG); + for (reg = BSM_SRAM_LOWER_BOUND; + reg < BSM_SRAM_LOWER_BOUND + len; + reg += sizeof(u32), image++) { + val = iwl_legacy_read_prph(priv, reg); + if (val != le32_to_cpu(*image)) { + IWL_ERR(priv, "BSM uCode verification failed at " + "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", + BSM_SRAM_LOWER_BOUND, + reg - BSM_SRAM_LOWER_BOUND, len, + val, le32_to_cpu(*image)); + return -EIO; + } + } + + IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n"); + + return 0; +} + +/** + * iwl4965_load_bsm - Load bootstrap instructions + * + * BSM operation: + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down during RFKILL. When powering back + * up after power-saving sleeps (or during initial uCode load), the BSM loads + * the bootstrap program into the on-board processor, and starts it. + * + * The bootstrap program loads (via DMA) instructions and data for a new + * program from host DRAM locations indicated by the host driver in the + * BSM_DRAM_* registers. Once the new program is loaded, it starts + * automatically. + * + * When initializing the NIC, the host driver points the BSM to the + * "initialize" uCode image. This uCode sets up some internal data, then + * notifies host via "initialize alive" that it is complete. + * + * The host then replaces the BSM_DRAM_* pointer values to point to the + * normal runtime uCode instructions and a backup uCode data cache buffer + * (filled initially with starting data values for the on-board processor), + * then triggers the "initialize" uCode to load and launch the runtime uCode, + * which begins normal operation. + * + * When doing a power-save shutdown, runtime uCode saves data SRAM into + * the backup data cache in DRAM before SRAM is powered down. + * + * When powering back up, the BSM loads the bootstrap program. This reloads + * the runtime uCode instructions and the backup data cache into SRAM, + * and re-launches the runtime uCode from where it left off. + */ +static int iwl4965_load_bsm(struct iwl_priv *priv) +{ + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + dma_addr_t pinst; + dma_addr_t pdata; + u32 inst_len; + u32 data_len; + int i; + u32 done; + u32 reg_offset; + int ret; + + IWL_DEBUG_INFO(priv, "Begin load bsm\n"); + + priv->ucode_type = UCODE_RT; + + /* make sure bootstrap program is no larger than BSM's SRAM size */ + if (len > IWL49_MAX_BSM_SIZE) + return -EINVAL; + + /* Tell bootstrap uCode where to find the "Initialize" uCode + * in host DRAM ... host DRAM physical address bits 35:4 for 4965. + * NOTE: iwl_init_alive_start() will replace these values, + * after the "initialize" uCode has run, to point to + * runtime/protocol instructions and backup data cache. + */ + pinst = priv->ucode_init.p_addr >> 4; + pdata = priv->ucode_init_data.p_addr >> 4; + inst_len = priv->ucode_init.len; + data_len = priv->ucode_init_data.len; + + iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); + + /* Fill BSM memory with bootstrap instructions */ + for (reg_offset = BSM_SRAM_LOWER_BOUND; + reg_offset < BSM_SRAM_LOWER_BOUND + len; + reg_offset += sizeof(u32), image++) + _iwl_legacy_write_prph(priv, reg_offset, le32_to_cpu(*image)); + + ret = iwl4965_verify_bsm(priv); + if (ret) + return ret; + + /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ + iwl_legacy_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); + iwl_legacy_write_prph(priv, + BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND); + iwl_legacy_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); + + /* Load bootstrap code into instruction SRAM now, + * to prepare to load "initialize" uCode */ + iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); + + /* Wait for load of bootstrap uCode to finish */ + for (i = 0; i < 100; i++) { + done = iwl_legacy_read_prph(priv, BSM_WR_CTRL_REG); + if (!(done & BSM_WR_CTRL_REG_BIT_START)) + break; + udelay(10); + } + if (i < 100) + IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i); + else { + IWL_ERR(priv, "BSM write did not complete!\n"); + return -EIO; + } + + /* Enable future boot loads whenever power management unit triggers it + * (e.g. when powering back up after power-save shutdown) */ + iwl_legacy_write_prph(priv, + BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); + + + return 0; +} + +/** + * iwl4965_set_ucode_ptrs - Set uCode address location + * + * Tell initialization uCode where to find runtime uCode. + * + * BSM registers initially contain pointers to initialization uCode. + * We need to replace them to load runtime uCode inst and data, + * and to save runtime data when powering down. + */ +static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) +{ + dma_addr_t pinst; + dma_addr_t pdata; + int ret = 0; + + /* bits 35:4 for 4965 */ + pinst = priv->ucode_code.p_addr >> 4; + pdata = priv->ucode_data_backup.p_addr >> 4; + + /* Tell bootstrap uCode where to find image to load */ + iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, + priv->ucode_data.len); + + /* Inst byte count must be last to set up, bit 31 signals uCode + * that all new ptr/size info is in place */ + iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, + priv->ucode_code.len | BSM_DRAM_INST_LOAD); + IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); + + return ret; +} + +/** + * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received + * + * Called after REPLY_ALIVE notification received from "initialize" uCode. + * + * The 4965 "initialize" ALIVE reply contains calibration data for: + * Voltage, temperature, and MIMO tx gain correction, now stored in priv + * (3945 does not contain this data). + * + * Tell "initialize" uCode to go ahead and load the runtime uCode. +*/ +static void iwl4965_init_alive_start(struct iwl_priv *priv) +{ + /* Bootstrap uCode has loaded initialize uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (iwl4965_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); + goto restart; + } + + /* Calculate temperature */ + priv->temperature = iwl4965_hw_get_temperature(priv); + + /* Send pointers to protocol/runtime uCode image ... init code will + * load and launch runtime uCode, which will send us another "Alive" + * notification. */ + IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); + if (iwl4965_set_ucode_ptrs(priv)) { + /* Runtime instruction load won't happen; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); + goto restart; + } + return; + +restart: + queue_work(priv->workqueue, &priv->restart); +} + +static bool iw4965_is_ht40_channel(__le32 rxon_flags) +{ + int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK) + >> RXON_FLG_CHANNEL_MODE_POS; + return ((chan_mod == CHANNEL_MODE_PURE_40) || + (chan_mod == CHANNEL_MODE_MIXED)); +} + +static void iwl4965_nic_config(struct iwl_priv *priv) +{ + unsigned long flags; + u16 radio_cfg; + + spin_lock_irqsave(&priv->lock, flags); + + radio_cfg = iwl_legacy_eeprom_query16(priv, EEPROM_RADIO_CONFIG); + + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + + /* set CSR_HW_CONFIG_REG for uCode use */ + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + + priv->calib_info = (struct iwl_eeprom_calib_info *) + iwl_legacy_eeprom_query_addr(priv, + EEPROM_4965_CALIB_TXPOWER_OFFSET); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +/* Reset differential Rx gains in NIC to prepare for chain noise calibration. + * Called after every association, but this runs only once! + * ... once chain noise is calibrated the first time, it's good forever. */ +static void iwl4965_chain_noise_reset(struct iwl_priv *priv) +{ + struct iwl_chain_noise_data *data = &(priv->chain_noise_data); + + if ((data->state == IWL_CHAIN_NOISE_ALIVE) && + iwl_legacy_is_any_associated(priv)) { + struct iwl_calib_diff_gain_cmd cmd; + + /* clear data for chain noise calibration algorithm */ + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD; + cmd.diff_gain_a = 0; + cmd.diff_gain_b = 0; + cmd.diff_gain_c = 0; + if (iwl_legacy_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd)) + IWL_ERR(priv, + "Could not send REPLY_PHY_CALIBRATION_CMD\n"); + data->state = IWL_CHAIN_NOISE_ACCUMULATE; + IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); + } +} + +static struct iwl_sensitivity_ranges iwl4965_sensitivity = { + .min_nrg_cck = 97, + .max_nrg_cck = 0, /* not used, set to 0 */ + + .auto_corr_min_ofdm = 85, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 140, + .auto_corr_max_ofdm_mrc_x1 = 270, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 200, + .auto_corr_max_cck_mrc = 400, + + .nrg_th_cck = 100, + .nrg_th_ofdm = 100, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +static void iwl4965_set_ct_threshold(struct iwl_priv *priv) +{ + /* want Kelvin */ + priv->hw_params.ct_kill_threshold = + CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); +} + +/** + * iwl4965_hw_set_hw_params + * + * Called when initializing driver + */ +static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) +{ + if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && + priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES) + priv->cfg->base_params->num_of_queues = + priv->cfg->mod_params->num_of_queues; + + priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; + priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; + priv->hw_params.scd_bc_tbls_size = + priv->cfg->base_params->num_of_queues * + sizeof(struct iwl4965_scd_bc_tbl); + priv->hw_params.tfd_size = sizeof(struct iwl_tfd); + priv->hw_params.max_stations = IWL4965_STATION_COUNT; + priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID; + priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; + priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; + priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); + + priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; + + priv->hw_params.tx_chains_num = iwl4965_num_of_ant(priv->cfg->valid_tx_ant); + priv->hw_params.rx_chains_num = iwl4965_num_of_ant(priv->cfg->valid_rx_ant); + priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; + priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; + + iwl4965_set_ct_threshold(priv); + + priv->hw_params.sens = &iwl4965_sensitivity; + priv->hw_params.beacon_time_tsf_bits = IWL4965_EXT_BEACON_TIME_POS; + + return 0; +} + +static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) +{ + s32 sign = 1; + + if (num < 0) { + sign = -sign; + num = -num; + } + if (denom < 0) { + sign = -sign; + denom = -denom; + } + *res = 1; + *res = ((num * 2 + denom) / (denom * 2)) * sign; + + return 1; +} + +/** + * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower + * + * Determines power supply voltage compensation for txpower calculations. + * Returns number of 1/2-dB steps to subtract from gain table index, + * to compensate for difference between power supply voltage during + * factory measurements, vs. current power supply voltage. + * + * Voltage indication is higher for lower voltage. + * Lower voltage requires more gain (lower gain table index). + */ +static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage, + s32 current_voltage) +{ + s32 comp = 0; + + if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) || + (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage)) + return 0; + + iwl4965_math_div_round(current_voltage - eeprom_voltage, + TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp); + + if (current_voltage > eeprom_voltage) + comp *= 2; + if ((comp < -2) || (comp > 2)) + comp = 0; + + return comp; +} + +static s32 iwl4965_get_tx_atten_grp(u16 channel) +{ + if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH && + channel <= CALIB_IWL_TX_ATTEN_GR5_LCH) + return CALIB_CH_GROUP_5; + + if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH && + channel <= CALIB_IWL_TX_ATTEN_GR1_LCH) + return CALIB_CH_GROUP_1; + + if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH && + channel <= CALIB_IWL_TX_ATTEN_GR2_LCH) + return CALIB_CH_GROUP_2; + + if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH && + channel <= CALIB_IWL_TX_ATTEN_GR3_LCH) + return CALIB_CH_GROUP_3; + + if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH && + channel <= CALIB_IWL_TX_ATTEN_GR4_LCH) + return CALIB_CH_GROUP_4; + + return -1; +} + +static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) +{ + s32 b = -1; + + for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { + if (priv->calib_info->band_info[b].ch_from == 0) + continue; + + if ((channel >= priv->calib_info->band_info[b].ch_from) + && (channel <= priv->calib_info->band_info[b].ch_to)) + break; + } + + return b; +} + +static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) +{ + s32 val; + + if (x2 == x1) + return y1; + else { + iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val); + return val + y2; + } +} + +/** + * iwl4965_interpolate_chan - Interpolate factory measurements for one channel + * + * Interpolates factory measurements from the two sample channels within a + * sub-band, to apply to channel of interest. Interpolation is proportional to + * differences in channel frequencies, which is proportional to differences + * in channel number. + */ +static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, + struct iwl_eeprom_calib_ch_info *chan_info) +{ + s32 s = -1; + u32 c; + u32 m; + const struct iwl_eeprom_calib_measure *m1; + const struct iwl_eeprom_calib_measure *m2; + struct iwl_eeprom_calib_measure *omeas; + u32 ch_i1; + u32 ch_i2; + + s = iwl4965_get_sub_band(priv, channel); + if (s >= EEPROM_TX_POWER_BANDS) { + IWL_ERR(priv, "Tx Power can not find channel %d\n", channel); + return -1; + } + + ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; + ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; + chan_info->ch_num = (u8) channel; + + IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n", + channel, s, ch_i1, ch_i2); + + for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { + for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { + m1 = &(priv->calib_info->band_info[s].ch1. + measurements[c][m]); + m2 = &(priv->calib_info->band_info[s].ch2. + measurements[c][m]); + omeas = &(chan_info->measurements[c][m]); + + omeas->actual_pow = + (u8) iwl4965_interpolate_value(channel, ch_i1, + m1->actual_pow, + ch_i2, + m2->actual_pow); + omeas->gain_idx = + (u8) iwl4965_interpolate_value(channel, ch_i1, + m1->gain_idx, ch_i2, + m2->gain_idx); + omeas->temperature = + (u8) iwl4965_interpolate_value(channel, ch_i1, + m1->temperature, + ch_i2, + m2->temperature); + omeas->pa_det = + (s8) iwl4965_interpolate_value(channel, ch_i1, + m1->pa_det, ch_i2, + m2->pa_det); + + IWL_DEBUG_TXPOWER(priv, + "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m, + m1->actual_pow, m2->actual_pow, omeas->actual_pow); + IWL_DEBUG_TXPOWER(priv, + "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m, + m1->gain_idx, m2->gain_idx, omeas->gain_idx); + IWL_DEBUG_TXPOWER(priv, + "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m, + m1->pa_det, m2->pa_det, omeas->pa_det); + IWL_DEBUG_TXPOWER(priv, + "chain %d meas %d T1=%d T2=%d T=%d\n", c, m, + m1->temperature, m2->temperature, + omeas->temperature); + } + } + + return 0; +} + +/* bit-rate-dependent table to prevent Tx distortion, in half-dB units, + * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */ +static s32 back_off_table[] = { + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */ + 10 /* CCK */ +}; + +/* Thermal compensation values for txpower for various frequency ranges ... + * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */ +static struct iwl4965_txpower_comp_entry { + s32 degrees_per_05db_a; + s32 degrees_per_05db_a_denom; +} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = { + {9, 2}, /* group 0 5.2, ch 34-43 */ + {4, 1}, /* group 1 5.2, ch 44-70 */ + {4, 1}, /* group 2 5.2, ch 71-124 */ + {4, 1}, /* group 3 5.2, ch 125-200 */ + {3, 1} /* group 4 2.4, ch all */ +}; + +static s32 get_min_power_index(s32 rate_power_index, u32 band) +{ + if (!band) { + if ((rate_power_index & 7) <= 4) + return MIN_TX_GAIN_INDEX_52GHZ_EXT; + } + return MIN_TX_GAIN_INDEX; +} + +struct gain_entry { + u8 dsp; + u8 radio; +}; + +static const struct gain_entry gain_table[2][108] = { + /* 5.2GHz power gain index table */ + { + {123, 0x3F}, /* highest txpower */ + {117, 0x3F}, + {110, 0x3F}, + {104, 0x3F}, + {98, 0x3F}, + {110, 0x3E}, + {104, 0x3E}, + {98, 0x3E}, + {110, 0x3D}, + {104, 0x3D}, + {98, 0x3D}, + {110, 0x3C}, + {104, 0x3C}, + {98, 0x3C}, + {110, 0x3B}, + {104, 0x3B}, + {98, 0x3B}, + {110, 0x3A}, + {104, 0x3A}, + {98, 0x3A}, + {110, 0x39}, + {104, 0x39}, + {98, 0x39}, + {110, 0x38}, + {104, 0x38}, + {98, 0x38}, + {110, 0x37}, + {104, 0x37}, + {98, 0x37}, + {110, 0x36}, + {104, 0x36}, + {98, 0x36}, + {110, 0x35}, + {104, 0x35}, + {98, 0x35}, + {110, 0x34}, + {104, 0x34}, + {98, 0x34}, + {110, 0x33}, + {104, 0x33}, + {98, 0x33}, + {110, 0x32}, + {104, 0x32}, + {98, 0x32}, + {110, 0x31}, + {104, 0x31}, + {98, 0x31}, + {110, 0x30}, + {104, 0x30}, + {98, 0x30}, + {110, 0x25}, + {104, 0x25}, + {98, 0x25}, + {110, 0x24}, + {104, 0x24}, + {98, 0x24}, + {110, 0x23}, + {104, 0x23}, + {98, 0x23}, + {110, 0x22}, + {104, 0x18}, + {98, 0x18}, + {110, 0x17}, + {104, 0x17}, + {98, 0x17}, + {110, 0x16}, + {104, 0x16}, + {98, 0x16}, + {110, 0x15}, + {104, 0x15}, + {98, 0x15}, + {110, 0x14}, + {104, 0x14}, + {98, 0x14}, + {110, 0x13}, + {104, 0x13}, + {98, 0x13}, + {110, 0x12}, + {104, 0x08}, + {98, 0x08}, + {110, 0x07}, + {104, 0x07}, + {98, 0x07}, + {110, 0x06}, + {104, 0x06}, + {98, 0x06}, + {110, 0x05}, + {104, 0x05}, + {98, 0x05}, + {110, 0x04}, + {104, 0x04}, + {98, 0x04}, + {110, 0x03}, + {104, 0x03}, + {98, 0x03}, + {110, 0x02}, + {104, 0x02}, + {98, 0x02}, + {110, 0x01}, + {104, 0x01}, + {98, 0x01}, + {110, 0x00}, + {104, 0x00}, + {98, 0x00}, + {93, 0x00}, + {88, 0x00}, + {83, 0x00}, + {78, 0x00}, + }, + /* 2.4GHz power gain index table */ + { + {110, 0x3f}, /* highest txpower */ + {104, 0x3f}, + {98, 0x3f}, + {110, 0x3e}, + {104, 0x3e}, + {98, 0x3e}, + {110, 0x3d}, + {104, 0x3d}, + {98, 0x3d}, + {110, 0x3c}, + {104, 0x3c}, + {98, 0x3c}, + {110, 0x3b}, + {104, 0x3b}, + {98, 0x3b}, + {110, 0x3a}, + {104, 0x3a}, + {98, 0x3a}, + {110, 0x39}, + {104, 0x39}, + {98, 0x39}, + {110, 0x38}, + {104, 0x38}, + {98, 0x38}, + {110, 0x37}, + {104, 0x37}, + {98, 0x37}, + {110, 0x36}, + {104, 0x36}, + {98, 0x36}, + {110, 0x35}, + {104, 0x35}, + {98, 0x35}, + {110, 0x34}, + {104, 0x34}, + {98, 0x34}, + {110, 0x33}, + {104, 0x33}, + {98, 0x33}, + {110, 0x32}, + {104, 0x32}, + {98, 0x32}, + {110, 0x31}, + {104, 0x31}, + {98, 0x31}, + {110, 0x30}, + {104, 0x30}, + {98, 0x30}, + {110, 0x6}, + {104, 0x6}, + {98, 0x6}, + {110, 0x5}, + {104, 0x5}, + {98, 0x5}, + {110, 0x4}, + {104, 0x4}, + {98, 0x4}, + {110, 0x3}, + {104, 0x3}, + {98, 0x3}, + {110, 0x2}, + {104, 0x2}, + {98, 0x2}, + {110, 0x1}, + {104, 0x1}, + {98, 0x1}, + {110, 0x0}, + {104, 0x0}, + {98, 0x0}, + {97, 0}, + {96, 0}, + {95, 0}, + {94, 0}, + {93, 0}, + {92, 0}, + {91, 0}, + {90, 0}, + {89, 0}, + {88, 0}, + {87, 0}, + {86, 0}, + {85, 0}, + {84, 0}, + {83, 0}, + {82, 0}, + {81, 0}, + {80, 0}, + {79, 0}, + {78, 0}, + {77, 0}, + {76, 0}, + {75, 0}, + {74, 0}, + {73, 0}, + {72, 0}, + {71, 0}, + {70, 0}, + {69, 0}, + {68, 0}, + {67, 0}, + {66, 0}, + {65, 0}, + {64, 0}, + {63, 0}, + {62, 0}, + {61, 0}, + {60, 0}, + {59, 0}, + } +}; + +static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, + u8 is_ht40, u8 ctrl_chan_high, + struct iwl4965_tx_power_db *tx_power_tbl) +{ + u8 saturation_power; + s32 target_power; + s32 user_target_power; + s32 power_limit; + s32 current_temp; + s32 reg_limit; + s32 current_regulatory; + s32 txatten_grp = CALIB_CH_GROUP_MAX; + int i; + int c; + const struct iwl_channel_info *ch_info = NULL; + struct iwl_eeprom_calib_ch_info ch_eeprom_info; + const struct iwl_eeprom_calib_measure *measurement; + s16 voltage; + s32 init_voltage; + s32 voltage_compensation; + s32 degrees_per_05db_num; + s32 degrees_per_05db_denom; + s32 factory_temp; + s32 temperature_comp[2]; + s32 factory_gain_index[2]; + s32 factory_actual_pwr[2]; + s32 power_index; + + /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units + * are used for indexing into txpower table) */ + user_target_power = 2 * priv->tx_power_user_lmt; + + /* Get current (RXON) channel, band, width */ + IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band, + is_ht40); + + ch_info = iwl_legacy_get_channel_info(priv, priv->band, channel); + + if (!iwl_legacy_is_channel_valid(ch_info)) + return -EINVAL; + + /* get txatten group, used to select 1) thermal txpower adjustment + * and 2) mimo txpower balance between Tx chains. */ + txatten_grp = iwl4965_get_tx_atten_grp(channel); + if (txatten_grp < 0) { + IWL_ERR(priv, "Can't find txatten group for channel %d.\n", + channel); + return -EINVAL; + } + + IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n", + channel, txatten_grp); + + if (is_ht40) { + if (ctrl_chan_high) + channel -= 2; + else + channel += 2; + } + + /* hardware txpower limits ... + * saturation (clipping distortion) txpowers are in half-dBm */ + if (band) + saturation_power = priv->calib_info->saturation_power24; + else + saturation_power = priv->calib_info->saturation_power52; + + if (saturation_power < IWL_TX_POWER_SATURATION_MIN || + saturation_power > IWL_TX_POWER_SATURATION_MAX) { + if (band) + saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24; + else + saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52; + } + + /* regulatory txpower limits ... reg_limit values are in half-dBm, + * max_power_avg values are in dBm, convert * 2 */ + if (is_ht40) + reg_limit = ch_info->ht40_max_power_avg * 2; + else + reg_limit = ch_info->max_power_avg * 2; + + if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) || + (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) { + if (band) + reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24; + else + reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52; + } + + /* Interpolate txpower calibration values for this channel, + * based on factory calibration tests on spaced channels. */ + iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); + + /* calculate tx gain adjustment based on power supply voltage */ + voltage = le16_to_cpu(priv->calib_info->voltage); + init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); + voltage_compensation = + iwl4965_get_voltage_compensation(voltage, init_voltage); + + IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n", + init_voltage, + voltage, voltage_compensation); + + /* get current temperature (Celsius) */ + current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN); + current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX); + current_temp = KELVIN_TO_CELSIUS(current_temp); + + /* select thermal txpower adjustment params, based on channel group + * (same frequency group used for mimo txatten adjustment) */ + degrees_per_05db_num = + tx_power_cmp_tble[txatten_grp].degrees_per_05db_a; + degrees_per_05db_denom = + tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom; + + /* get per-chain txpower values from factory measurements */ + for (c = 0; c < 2; c++) { + measurement = &ch_eeprom_info.measurements[c][1]; + + /* txgain adjustment (in half-dB steps) based on difference + * between factory and current temperature */ + factory_temp = measurement->temperature; + iwl4965_math_div_round((current_temp - factory_temp) * + degrees_per_05db_denom, + degrees_per_05db_num, + &temperature_comp[c]); + + factory_gain_index[c] = measurement->gain_idx; + factory_actual_pwr[c] = measurement->actual_pow; + + IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c); + IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, " + "curr tmp %d, comp %d steps\n", + factory_temp, current_temp, + temperature_comp[c]); + + IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n", + factory_gain_index[c], + factory_actual_pwr[c]); + } + + /* for each of 33 bit-rates (including 1 for CCK) */ + for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) { + u8 is_mimo_rate; + union iwl4965_tx_power_dual_stream tx_power; + + /* for mimo, reduce each chain's txpower by half + * (3dB, 6 steps), so total output power is regulatory + * compliant. */ + if (i & 0x8) { + current_regulatory = reg_limit - + IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION; + is_mimo_rate = 1; + } else { + current_regulatory = reg_limit; + is_mimo_rate = 0; + } + + /* find txpower limit, either hardware or regulatory */ + power_limit = saturation_power - back_off_table[i]; + if (power_limit > current_regulatory) + power_limit = current_regulatory; + + /* reduce user's txpower request if necessary + * for this rate on this channel */ + target_power = user_target_power; + if (target_power > power_limit) + target_power = power_limit; + + IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n", + i, saturation_power - back_off_table[i], + current_regulatory, user_target_power, + target_power); + + /* for each of 2 Tx chains (radio transmitters) */ + for (c = 0; c < 2; c++) { + s32 atten_value; + + if (is_mimo_rate) + atten_value = + (s32)le32_to_cpu(priv->card_alive_init. + tx_atten[txatten_grp][c]); + else + atten_value = 0; + + /* calculate index; higher index means lower txpower */ + power_index = (u8) (factory_gain_index[c] - + (target_power - + factory_actual_pwr[c]) - + temperature_comp[c] - + voltage_compensation + + atten_value); + +/* IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n", + power_index); */ + + if (power_index < get_min_power_index(i, band)) + power_index = get_min_power_index(i, band); + + /* adjust 5 GHz index to support negative indexes */ + if (!band) + power_index += 9; + + /* CCK, rate 32, reduce txpower for CCK */ + if (i == POWER_TABLE_CCK_ENTRY) + power_index += + IWL_TX_POWER_CCK_COMPENSATION_C_STEP; + + /* stay within the table! */ + if (power_index > 107) { + IWL_WARN(priv, "txpower index %d > 107\n", + power_index); + power_index = 107; + } + if (power_index < 0) { + IWL_WARN(priv, "txpower index %d < 0\n", + power_index); + power_index = 0; + } + + /* fill txpower command for this rate/chain */ + tx_power.s.radio_tx_gain[c] = + gain_table[band][power_index].radio; + tx_power.s.dsp_predis_atten[c] = + gain_table[band][power_index].dsp; + + IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d " + "gain 0x%02x dsp %d\n", + c, atten_value, power_index, + tx_power.s.radio_tx_gain[c], + tx_power.s.dsp_predis_atten[c]); + } /* for each chain */ + + tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); + + } /* for each rate */ + + return 0; +} + +/** + * iwl4965_send_tx_power - Configure the TXPOWER level user limit + * + * Uses the active RXON for channel, band, and characteristics (ht40, high) + * The power limit is taken from priv->tx_power_user_lmt. + */ +static int iwl4965_send_tx_power(struct iwl_priv *priv) +{ + struct iwl4965_txpowertable_cmd cmd = { 0 }; + int ret; + u8 band = 0; + bool is_ht40 = false; + u8 ctrl_chan_high = 0; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + band = priv->band == IEEE80211_BAND_2GHZ; + + is_ht40 = iw4965_is_ht40_channel(ctx->active.flags); + + if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) + ctrl_chan_high = 1; + + cmd.band = band; + cmd.channel = ctx->active.channel; + + ret = iwl4965_fill_txpower_tbl(priv, band, + le16_to_cpu(ctx->active.channel), + is_ht40, ctrl_chan_high, &cmd.tx_power); + if (ret) + goto out; + + ret = iwl_legacy_send_cmd_pdu(priv, + REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd); + +out: + return ret; +} + +static int iwl4965_send_rxon_assoc(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret = 0; + struct iwl4965_rxon_assoc_cmd rxon_assoc; + const struct iwl_legacy_rxon_cmd *rxon1 = &ctx->staging; + const struct iwl_legacy_rxon_cmd *rxon2 = &ctx->active; + + if ((rxon1->flags == rxon2->flags) && + (rxon1->filter_flags == rxon2->filter_flags) && + (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && + (rxon1->ofdm_ht_single_stream_basic_rates == + rxon2->ofdm_ht_single_stream_basic_rates) && + (rxon1->ofdm_ht_dual_stream_basic_rates == + rxon2->ofdm_ht_dual_stream_basic_rates) && + (rxon1->rx_chain == rxon2->rx_chain) && + (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { + IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = ctx->staging.flags; + rxon_assoc.filter_flags = ctx->staging.filter_flags; + rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; + rxon_assoc.reserved = 0; + rxon_assoc.ofdm_ht_single_stream_basic_rates = + ctx->staging.ofdm_ht_single_stream_basic_rates; + rxon_assoc.ofdm_ht_dual_stream_basic_rates = + ctx->staging.ofdm_ht_dual_stream_basic_rates; + rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; + + ret = iwl_legacy_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC, + sizeof(rxon_assoc), &rxon_assoc, NULL); + if (ret) + return ret; + + return ret; +} + +static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + /* cast away the const for active_rxon in this function */ + struct iwl_legacy_rxon_cmd *active_rxon = (void *)&ctx->active; + int ret; + bool new_assoc = + !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); + + if (!iwl_legacy_is_alive(priv)) + return -EBUSY; + + if (!ctx->is_active) + return 0; + + /* always get timestamp with Rx frame */ + ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; + + ret = iwl_legacy_check_rxon_cmd(priv, ctx); + if (ret) { + IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* + * receive commit_rxon request + * abort any previous channel switch if still in process + */ + if (priv->switch_rxon.switch_in_progress && + (priv->switch_rxon.channel != ctx->staging.channel)) { + IWL_DEBUG_11H(priv, "abort channel switch on %d\n", + le16_to_cpu(priv->switch_rxon.channel)); + iwl_legacy_chswitch_done(priv, false); + } + + /* If we don't need to send a full RXON, we can use + * iwl_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!iwl_legacy_full_rxon_required(priv, ctx)) { + ret = iwl_legacy_send_rxon_assoc(priv, ctx); + if (ret) { + IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); + return ret; + } + + memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); + iwl_legacy_print_rx_config_cmd(priv, ctx); + return 0; + } + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (iwl_legacy_is_associated_ctx(ctx) && new_assoc) { + IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, + sizeof(struct iwl_legacy_rxon_cmd), + active_rxon); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (ret) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret); + return ret; + } + iwl_legacy_clear_ucode_stations(priv, ctx); + iwl_legacy_restore_stations(priv, ctx); + ret = iwl4965_restore_default_wep_keys(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); + return ret; + } + } + + IWL_DEBUG_INFO(priv, "Sending RXON\n" + "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" + "* bssid = %pM\n", + (new_assoc ? "" : "out"), + le16_to_cpu(ctx->staging.channel), + ctx->staging.bssid_addr); + + iwl_legacy_set_rxon_hwcrypto(priv, ctx, + !priv->cfg->mod_params->sw_crypto); + + /* Apply the new configuration + * RXON unassoc clears the station table in uCode so restoration of + * stations is needed after it (the RXON command) completes + */ + if (!new_assoc) { + ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, + sizeof(struct iwl_legacy_rxon_cmd), &ctx->staging); + if (ret) { + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); + return ret; + } + IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n"); + memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); + iwl_legacy_clear_ucode_stations(priv, ctx); + iwl_legacy_restore_stations(priv, ctx); + ret = iwl4965_restore_default_wep_keys(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); + return ret; + } + } + if (new_assoc) { + priv->start_calib = 0; + /* Apply the new configuration + * RXON assoc doesn't clear the station table in uCode, + */ + ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, + sizeof(struct iwl_legacy_rxon_cmd), &ctx->staging); + if (ret) { + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); + } + iwl_legacy_print_rx_config_cmd(priv, ctx); + + iwl4965_init_sensitivity(priv); + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); + if (ret) { + IWL_ERR(priv, "Error sending TX power (%d)\n", ret); + return ret; + } + + return 0; +} + +static int iwl4965_hw_channel_switch(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + int rc; + u8 band = 0; + bool is_ht40 = false; + u8 ctrl_chan_high = 0; + struct iwl4965_channel_switch_cmd cmd; + const struct iwl_channel_info *ch_info; + u32 switch_time_in_usec, ucode_switch_time; + u16 ch; + u32 tsf_low; + u8 switch_count; + u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); + struct ieee80211_vif *vif = ctx->vif; + band = priv->band == IEEE80211_BAND_2GHZ; + + is_ht40 = iw4965_is_ht40_channel(ctx->staging.flags); + + if (is_ht40 && + (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) + ctrl_chan_high = 1; + + cmd.band = band; + cmd.expect_beacon = 0; + ch = ch_switch->channel->hw_value; + cmd.channel = cpu_to_le16(ch); + cmd.rxon_flags = ctx->staging.flags; + cmd.rxon_filter_flags = ctx->staging.filter_flags; + switch_count = ch_switch->count; + tsf_low = ch_switch->timestamp & 0x0ffffffff; + /* + * calculate the ucode channel switch time + * adding TSF as one of the factor for when to switch + */ + if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { + if (switch_count > ((priv->ucode_beacon_time - tsf_low) / + beacon_interval)) { + switch_count -= (priv->ucode_beacon_time - + tsf_low) / beacon_interval; + } else + switch_count = 0; + } + if (switch_count <= 1) + cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + else { + switch_time_in_usec = + vif->bss_conf.beacon_int * switch_count * TIME_UNIT; + ucode_switch_time = iwl_legacy_usecs_to_beacons(priv, + switch_time_in_usec, + beacon_interval); + cmd.switch_time = iwl_legacy_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); + } + IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", + cmd.switch_time); + ch_info = iwl_legacy_get_channel_info(priv, priv->band, ch); + if (ch_info) + cmd.expect_beacon = iwl_legacy_is_channel_radar(ch_info); + else { + IWL_ERR(priv, "invalid channel switch from %u to %u\n", + ctx->active.channel, ch); + return -EFAULT; + } + + rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40, + ctrl_chan_high, &cmd.tx_power); + if (rc) { + IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc); + return rc; + } + + priv->switch_rxon.channel = cmd.channel; + priv->switch_rxon.switch_in_progress = true; + + return iwl_legacy_send_cmd_pdu(priv, + REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); +} + +/** + * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array + */ +static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + u16 byte_cnt) +{ + struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr; + int txq_id = txq->q.id; + int write_ptr = txq->q.write_ptr; + int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; + __le16 bc_ent; + + WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX); + + bc_ent = cpu_to_le16(len & 0xFFF); + /* Set up byte count within first 256 entries */ + scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; + + /* If within first 64 entries, duplicate at end */ + if (write_ptr < TFD_QUEUE_SIZE_BC_DUP) + scd_bc_tbl[txq_id]. + tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent; +} + +/** + * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin) + * @statistics: Provides the temperature reading from the uCode + * + * A return of <0 indicates bogus data in the statistics + */ +static int iwl4965_hw_get_temperature(struct iwl_priv *priv) +{ + s32 temperature; + s32 vt; + s32 R1, R2, R3; + u32 R4; + + if (test_bit(STATUS_TEMPERATURE, &priv->status) && + (priv->_4965.statistics.flag & + STATISTICS_REPLY_FLG_HT40_MODE_MSK)) { + IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n"); + R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); + R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); + R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); + R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]); + } else { + IWL_DEBUG_TEMP(priv, "Running temperature calibration\n"); + R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); + R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); + R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); + R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]); + } + + /* + * Temperature is only 23 bits, so sign extend out to 32. + * + * NOTE If we haven't received a statistics notification yet + * with an updated temperature, use R4 provided to us in the + * "initialize" ALIVE response. + */ + if (!test_bit(STATUS_TEMPERATURE, &priv->status)) + vt = sign_extend32(R4, 23); + else + vt = sign_extend32(le32_to_cpu(priv->_4965.statistics. + general.common.temperature), 23); + + IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt); + + if (R3 == R1) { + IWL_ERR(priv, "Calibration conflict R1 == R3\n"); + return -1; + } + + /* Calculate temperature in degrees Kelvin, adjust by 97%. + * Add offset to center the adjustment around 0 degrees Centigrade. */ + temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); + temperature /= (R3 - R1); + temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET; + + IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n", + temperature, KELVIN_TO_CELSIUS(temperature)); + + return temperature; +} + +/* Adjust Txpower only if temperature variance is greater than threshold. */ +#define IWL_TEMPERATURE_THRESHOLD 3 + +/** + * iwl4965_is_temp_calib_needed - determines if new calibration is needed + * + * If the temperature changed has changed sufficiently, then a recalibration + * is needed. + * + * Assumes caller will replace priv->last_temperature once calibration + * executed. + */ +static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv) +{ + int temp_diff; + + if (!test_bit(STATUS_STATISTICS, &priv->status)) { + IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n"); + return 0; + } + + temp_diff = priv->temperature - priv->last_temperature; + + /* get absolute value */ + if (temp_diff < 0) { + IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff); + temp_diff = -temp_diff; + } else if (temp_diff == 0) + IWL_DEBUG_POWER(priv, "Temperature unchanged\n"); + else + IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff); + + if (temp_diff < IWL_TEMPERATURE_THRESHOLD) { + IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n"); + return 0; + } + + IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n"); + + return 1; +} + +static void iwl4965_temperature_calib(struct iwl_priv *priv) +{ + s32 temp; + + temp = iwl4965_hw_get_temperature(priv); + if (temp < 0) + return; + + if (priv->temperature != temp) { + if (priv->temperature) + IWL_DEBUG_TEMP(priv, "Temperature changed " + "from %dC to %dC\n", + KELVIN_TO_CELSIUS(priv->temperature), + KELVIN_TO_CELSIUS(temp)); + else + IWL_DEBUG_TEMP(priv, "Temperature " + "initialized to %dC\n", + KELVIN_TO_CELSIUS(temp)); + } + + priv->temperature = temp; + set_bit(STATUS_TEMPERATURE, &priv->status); + + if (!priv->disable_tx_power_cal && + unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && + iwl4965_is_temp_calib_needed(priv)) + queue_work(priv->workqueue, &priv->txpower_work); +} + +static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) +{ + switch (cmd_id) { + case REPLY_RXON: + return (u16) sizeof(struct iwl4965_rxon_cmd); + default: + return len; + } +} + +static u16 iwl4965_build_addsta_hcmd(const struct iwl_legacy_addsta_cmd *cmd, + u8 *data) +{ + struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cmd->tid_disable_tx; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + addsta->sleep_tx_count = cmd->sleep_tx_count; + addsta->reserved1 = cpu_to_le16(0); + addsta->reserved2 = cpu_to_le16(0); + + return (u16)sizeof(struct iwl4965_addsta_cmd); +} + +static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) +{ + return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN; +} + +/** + * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue + */ +static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, + struct iwl_ht_agg *agg, + struct iwl4965_tx_resp *tx_resp, + int txq_id, u16 start_idx) +{ + u16 status; + struct agg_tx_status *frame_status = tx_resp->u.agg_status; + struct ieee80211_tx_info *info = NULL; + struct ieee80211_hdr *hdr = NULL; + u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); + int i, sh, idx; + u16 seq; + if (agg->wait_for_ba) + IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n"); + + agg->frame_count = tx_resp->frame_count; + agg->start_idx = start_idx; + agg->rate_n_flags = rate_n_flags; + agg->bitmap = 0; + + /* num frames attempted by Tx command */ + if (agg->frame_count == 1) { + /* Only one frame was attempted; no block-ack will arrive */ + status = le16_to_cpu(frame_status[0].status); + idx = start_idx; + + IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n", + agg->frame_count, agg->start_idx, idx); + + info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb); + info->status.rates[0].count = tx_resp->failure_frame + 1; + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->flags |= iwl4965_tx_status_to_mac80211(status); + iwl4965_hwrate_to_tx_control(priv, rate_n_flags, info); + + IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n", + status & 0xff, tx_resp->failure_frame); + IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags); + + agg->wait_for_ba = 0; + } else { + /* Two or more frames were attempted; expect block-ack */ + u64 bitmap = 0; + int start = agg->start_idx; + + /* Construct bit-map of pending frames within Tx window */ + for (i = 0; i < agg->frame_count; i++) { + u16 sc; + status = le16_to_cpu(frame_status[i].status); + seq = le16_to_cpu(frame_status[i].sequence); + idx = SEQ_TO_INDEX(seq); + txq_id = SEQ_TO_QUEUE(seq); + + if (status & (AGG_TX_STATE_FEW_BYTES_MSK | + AGG_TX_STATE_ABORT_MSK)) + continue; + + IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n", + agg->frame_count, txq_id, idx); + + hdr = iwl_legacy_tx_queue_get_hdr(priv, txq_id, idx); + if (!hdr) { + IWL_ERR(priv, + "BUG_ON idx doesn't point to valid skb" + " idx=%d, txq_id=%d\n", idx, txq_id); + return -1; + } + + sc = le16_to_cpu(hdr->seq_ctrl); + if (idx != (SEQ_TO_SN(sc) & 0xff)) { + IWL_ERR(priv, + "BUG_ON idx doesn't match seq control" + " idx=%d, seq_idx=%d, seq=%d\n", + idx, SEQ_TO_SN(sc), hdr->seq_ctrl); + return -1; + } + + IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n", + i, idx, SEQ_TO_SN(sc)); + + sh = idx - start; + if (sh > 64) { + sh = (start - idx) + 0xff; + bitmap = bitmap << sh; + sh = 0; + start = idx; + } else if (sh < -64) + sh = 0xff - (start - idx); + else if (sh < 0) { + sh = start - idx; + start = idx; + bitmap = bitmap << sh; + sh = 0; + } + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); + } + + agg->bitmap = bitmap; + agg->start_idx = start; + IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n", + agg->frame_count, agg->start_idx, + (unsigned long long)agg->bitmap); + + if (bitmap) + agg->wait_for_ba = 1; + } + return 0; +} + +static u8 iwl4965_find_station(struct iwl_priv *priv, const u8 *addr) +{ + int i; + int start = 0; + int ret = IWL_INVALID_STATION; + unsigned long flags; + + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC)) + start = IWL_STA_ID; + + if (is_broadcast_ether_addr(addr)) + return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; + + spin_lock_irqsave(&priv->sta_lock, flags); + for (i = start; i < priv->hw_params.max_stations; i++) + if (priv->stations[i].used && + (!compare_ether_addr(priv->stations[i].sta.sta.addr, + addr))) { + ret = i; + goto out; + } + + IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n", + addr, priv->num_stations); + + out: + /* + * It may be possible that more commands interacting with stations + * arrive before we completed processing the adding of + * station + */ + if (ret != IWL_INVALID_STATION && + (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) || + ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) && + (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) { + IWL_ERR(priv, "Requested station info for sta %d before ready.\n", + ret); + ret = IWL_INVALID_STATION; + } + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; +} + +static int iwl4965_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) +{ + if (priv->iw_mode == NL80211_IFTYPE_STATION) { + return IWL_AP_ID; + } else { + u8 *da = ieee80211_get_DA(hdr); + return iwl4965_find_station(priv, da); + } +} + +/** + * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response + */ +static void iwl4965_rx_reply_tx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int index = SEQ_TO_INDEX(sequence); + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *info; + struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le32_to_cpu(tx_resp->u.status); + int uninitialized_var(tid); + int sta_id; + int freed; + u8 *qc = NULL; + unsigned long flags; + + if ((index >= txq->q.n_bd) || (iwl_legacy_queue_used(&txq->q, index) == 0)) { + IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " + "is out of range [0-%d] %d %d\n", txq_id, + index, txq->q.n_bd, txq->q.write_ptr, + txq->q.read_ptr); + return; + } + + txq->time_stamp = jiffies; + info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); + memset(&info->status, 0, sizeof(info->status)); + + hdr = iwl_legacy_tx_queue_get_hdr(priv, txq_id, index); + if (ieee80211_is_data_qos(hdr->frame_control)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } + + sta_id = iwl4965_get_ra_sta_id(priv, hdr); + if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { + IWL_ERR(priv, "Station not known\n"); + return; + } + + spin_lock_irqsave(&priv->sta_lock, flags); + if (txq->sched_retry) { + const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp); + struct iwl_ht_agg *agg = NULL; + WARN_ON(!qc); + + agg = &priv->stations[sta_id].tid[tid].agg; + + iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); + + /* check if BAR is needed */ + if ((tx_resp->frame_count == 1) && !iwl4965_is_tx_success(status)) + info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + + if (txq->q.read_ptr != (scd_ssn & 0xff)) { + index = iwl_legacy_queue_dec_wrap(scd_ssn & 0xff, + txq->q.n_bd); + IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " + "%d index %d\n", scd_ssn , index); + freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); + if (qc) + iwl4965_free_tfds_in_queue(priv, sta_id, + tid, freed); + + if (priv->mac80211_registered && + (iwl_legacy_queue_space(&txq->q) > txq->q.low_mark) + && (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) + iwl_legacy_wake_queue(priv, txq); + } + } else { + info->status.rates[0].count = tx_resp->failure_frame + 1; + info->flags |= iwl4965_tx_status_to_mac80211(status); + iwl4965_hwrate_to_tx_control(priv, + le32_to_cpu(tx_resp->rate_n_flags), + info); + + IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) " + "rate_n_flags 0x%x retries %d\n", + txq_id, + iwl4965_get_tx_fail_reason(status), status, + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame); + + freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); + if (qc && likely(sta_id != IWL_INVALID_STATION)) + iwl4965_free_tfds_in_queue(priv, sta_id, tid, freed); + else if (sta_id == IWL_INVALID_STATION) + IWL_DEBUG_TX_REPLY(priv, "Station not known\n"); + + if (priv->mac80211_registered && + (iwl_legacy_queue_space(&txq->q) > txq->q.low_mark)) + iwl_legacy_wake_queue(priv, txq); + } + if (qc && likely(sta_id != IWL_INVALID_STATION)) + iwl4965_txq_check_empty(priv, sta_id, tid, txq_id); + + iwl4965_check_abort_status(priv, tx_resp->frame_count, status); + + spin_unlock_irqrestore(&priv->sta_lock, flags); +} + +static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw; + u8 rate __maybe_unused = + iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); + + IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d " + "tsf:0x%.8x%.8x rate:%d\n", + le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), + le32_to_cpu(beacon->low_tsf), rate); + + priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); +} + +/* Set up 4965-specific Rx frame reply handlers */ +static void iwl4965_rx_handler_setup(struct iwl_priv *priv) +{ + /* Legacy Rx frames */ + priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx; + /* Tx response */ + priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; + priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; +} + +static struct iwl_hcmd_ops iwl4965_hcmd = { + .rxon_assoc = iwl4965_send_rxon_assoc, + .commit_rxon = iwl4965_commit_rxon, + .set_rxon_chain = iwl4965_set_rxon_chain, +}; + +static void iwl4965_post_scan(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + /* + * Since setting the RXON may have been deferred while + * performing the scan, fire one off if needed + */ + if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) + iwl_legacy_commit_rxon(priv, ctx); +} + +static void iwl4965_post_associate(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct ieee80211_vif *vif = ctx->vif; + struct ieee80211_conf *conf = NULL; + int ret = 0; + + if (!vif || !priv->is_open) + return; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl_legacy_scan_cancel_timeout(priv, 200); + + conf = iwl_legacy_ieee80211_get_hw_conf(priv->hw); + + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl_legacy_commit_rxon(priv, ctx); + + ret = iwl_legacy_send_rxon_timing(priv, ctx); + if (ret) + IWL_WARN(priv, "RXON timing - " + "Attempting to continue.\n"); + + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + + iwl_legacy_set_rxon_ht(priv, &priv->current_ht_config); + + if (priv->cfg->ops->hcmd->set_rxon_chain) + priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); + + ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); + + IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", + vif->bss_conf.aid, vif->bss_conf.beacon_int); + + if (vif->bss_conf.use_short_preamble) + ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (vif->bss_conf.use_short_slot) + ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + } + + iwl_legacy_commit_rxon(priv, ctx); + + IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", + vif->bss_conf.aid, ctx->active.bssid_addr); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + break; + case NL80211_IFTYPE_ADHOC: + iwl4965_send_beacon_cmd(priv); + break; + default: + IWL_ERR(priv, "%s Should not be called in %d mode\n", + __func__, vif->type); + break; + } + + /* the chain noise calibration will enabled PM upon completion + * If chain noise has already been run, then we need to enable + * power management here */ + if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) + iwl_legacy_power_update_mode(priv, false); + + /* Enable Rx differential gain and sensitivity calibrations */ + iwl4965_chain_noise_reset(priv); + priv->start_calib = 1; +} + +static void iwl4965_config_ap(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct ieee80211_vif *vif = ctx->vif; + int ret = 0; + + lockdep_assert_held(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* The following should be done only at AP bring up */ + if (!iwl_legacy_is_associated_ctx(ctx)) { + + /* RXON - unassoc (to set timing command) */ + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl_legacy_commit_rxon(priv, ctx); + + /* RXON Timing */ + ret = iwl_legacy_send_rxon_timing(priv, ctx); + if (ret) + IWL_WARN(priv, "RXON timing failed - " + "Attempting to continue.\n"); + + /* AP has all antennas */ + priv->chain_noise_data.active_chains = + priv->hw_params.valid_rx_ant; + iwl_legacy_set_rxon_ht(priv, &priv->current_ht_config); + if (priv->cfg->ops->hcmd->set_rxon_chain) + priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); + + ctx->staging.assoc_id = 0; + + if (vif->bss_conf.use_short_preamble) + ctx->staging.flags |= + RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags &= + ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (vif->bss_conf.use_short_slot) + ctx->staging.flags |= + RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + } + /* need to send beacon cmd before committing assoc RXON! */ + iwl4965_send_beacon_cmd(priv); + /* restore RXON assoc */ + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + iwl_legacy_commit_rxon(priv, ctx); + } + iwl4965_send_beacon_cmd(priv); +} + +static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { + .get_hcmd_size = iwl4965_get_hcmd_size, + .build_addsta_hcmd = iwl4965_build_addsta_hcmd, + .request_scan = iwl4965_request_scan, + .post_scan = iwl4965_post_scan, +}; + +static struct iwl_lib_ops iwl4965_lib = { + .set_hw_params = iwl4965_hw_set_hw_params, + .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, + .txq_attach_buf_to_tfd = iwl4965_hw_txq_attach_buf_to_tfd, + .txq_free_tfd = iwl4965_hw_txq_free_tfd, + .txq_init = iwl4965_hw_tx_queue_init, + .rx_handler_setup = iwl4965_rx_handler_setup, + .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, + .init_alive_start = iwl4965_init_alive_start, + .load_ucode = iwl4965_load_bsm, + .dump_nic_event_log = iwl4965_dump_nic_event_log, + .dump_nic_error_log = iwl4965_dump_nic_error_log, + .dump_fh = iwl4965_dump_fh, + .set_channel_switch = iwl4965_hw_channel_switch, + .apm_ops = { + .init = iwl_legacy_apm_init, + .config = iwl4965_nic_config, + }, + .eeprom_ops = { + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS, + EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS + }, + .acquire_semaphore = iwl4965_eeprom_acquire_semaphore, + .release_semaphore = iwl4965_eeprom_release_semaphore, + }, + .send_tx_power = iwl4965_send_tx_power, + .update_chain_flags = iwl4965_update_chain_flags, + .temp_ops = { + .temperature = iwl4965_temperature_calib, + }, + .debugfs_ops = { + .rx_stats_read = iwl4965_ucode_rx_stats_read, + .tx_stats_read = iwl4965_ucode_tx_stats_read, + .general_stats_read = iwl4965_ucode_general_stats_read, + }, + .check_plcp_health = iwl4965_good_plcp_health, +}; + +static const struct iwl_legacy_ops iwl4965_legacy_ops = { + .post_associate = iwl4965_post_associate, + .config_ap = iwl4965_config_ap, + .manage_ibss_station = iwl4965_manage_ibss_station, + .update_bcast_stations = iwl4965_update_bcast_stations, +}; + +struct ieee80211_ops iwl4965_hw_ops = { + .tx = iwl4965_mac_tx, + .start = iwl4965_mac_start, + .stop = iwl4965_mac_stop, + .add_interface = iwl_legacy_mac_add_interface, + .remove_interface = iwl_legacy_mac_remove_interface, + .change_interface = iwl_legacy_mac_change_interface, + .config = iwl_legacy_mac_config, + .configure_filter = iwl4965_configure_filter, + .set_key = iwl4965_mac_set_key, + .update_tkip_key = iwl4965_mac_update_tkip_key, + .conf_tx = iwl_legacy_mac_conf_tx, + .reset_tsf = iwl_legacy_mac_reset_tsf, + .bss_info_changed = iwl_legacy_mac_bss_info_changed, + .ampdu_action = iwl4965_mac_ampdu_action, + .hw_scan = iwl_legacy_mac_hw_scan, + .sta_add = iwl4965_mac_sta_add, + .sta_remove = iwl_legacy_mac_sta_remove, + .channel_switch = iwl4965_mac_channel_switch, + .tx_last_beacon = iwl_legacy_mac_tx_last_beacon, +}; + +static const struct iwl_ops iwl4965_ops = { + .lib = &iwl4965_lib, + .hcmd = &iwl4965_hcmd, + .utils = &iwl4965_hcmd_utils, + .led = &iwl4965_led_ops, + .legacy = &iwl4965_legacy_ops, + .ieee80211_ops = &iwl4965_hw_ops, +}; + +static struct iwl_base_params iwl4965_base_params = { + .eeprom_size = IWL4965_EEPROM_IMG_SIZE, + .num_of_queues = IWL49_NUM_QUEUES, + .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = true, + .led_compensation = 61, + .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .wd_timeout = IWL_DEF_WD_TIMEOUT, + .temperature_kelvin = true, + .max_event_log_size = 512, + .ucode_tracing = true, + .sensitivity_calib_by_driver = true, + .chain_noise_calib_by_driver = true, +}; + +struct iwl_cfg iwl4965_cfg = { + .name = "Intel(R) Wireless WiFi Link 4965AGN", + .fw_name_pre = IWL4965_FW_PRE, + .ucode_api_max = IWL4965_UCODE_API_MAX, + .ucode_api_min = IWL4965_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_ABC, + .eeprom_ver = EEPROM_4965_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION, + .ops = &iwl4965_ops, + .mod_params = &iwl4965_mod_params, + .base_params = &iwl4965_base_params, + .led_mode = IWL_LED_BLINK, + /* + * Force use of chains B and C for scan RX on 5 GHz band + * because the device has off-channel reception on chain A. + */ + .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC, +}; + +/* Module firmware */ +MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX)); |