diff options
Diffstat (limited to 'drivers/net/wireless/hostap')
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 15 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_hw.c | 13 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_wlan.h | 2 |
3 files changed, 27 insertions, 3 deletions
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index db72461c486..29b31a694b5 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -594,6 +594,7 @@ static int prism2_config(struct pcmcia_device *link) local_info_t *local; int ret = 1; struct hostap_cs_priv *hw_priv; + unsigned long flags; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); @@ -625,9 +626,15 @@ static int prism2_config(struct pcmcia_device *link) local->hw_priv = hw_priv; hw_priv->link = link; + /* + * Make sure the IRQ handler cannot proceed until at least + * dev->base_addr is initialized. + */ + spin_lock_irqsave(&local->irq_init_lock, flags); + ret = pcmcia_request_irq(link, prism2_interrupt); if (ret) - goto failed; + goto failed_unlock; /* * This actually configures the PCMCIA socket -- setting up @@ -636,11 +643,13 @@ static int prism2_config(struct pcmcia_device *link) */ ret = pcmcia_request_configuration(link, &link->conf); if (ret) - goto failed; + goto failed_unlock; dev->irq = link->irq; dev->base_addr = link->io.BasePort1; + spin_unlock_irqrestore(&local->irq_init_lock, flags); + /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", dev_info, link->conf.ConfigIndex); @@ -667,6 +676,8 @@ static int prism2_config(struct pcmcia_device *link) return ret; + failed_unlock: + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index ff9b5c88218..2f999fc94f6 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2621,6 +2621,18 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) iface = netdev_priv(dev); local = iface->local; + /* Detect early interrupt before driver is fully configued */ + spin_lock(&local->irq_init_lock); + if (!dev->base_addr) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", + dev->name); + } + spin_unlock(&local->irq_init_lock); + return IRQ_HANDLED; + } + spin_unlock(&local->irq_init_lock); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); if (local->func->card_present && !local->func->card_present(local)) { @@ -3138,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, spin_lock_init(&local->cmdlock); spin_lock_init(&local->baplock); spin_lock_init(&local->lock); + spin_lock_init(&local->irq_init_lock); mutex_init(&local->rid_bap_mtx); if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index c02f8667a7e..1c66b3c1030 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -654,7 +654,7 @@ struct local_info { rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock * when removing entries from the list. * TX and RX paths can use read lock. */ - spinlock_t cmdlock, baplock, lock; + spinlock_t cmdlock, baplock, lock, irq_init_lock; struct mutex rid_bap_mtx; u16 infofid; /* MAC buffer id for info frame */ /* txfid, intransmitfid, next_txtid, and next_alloc are protected by |