diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmsmac')
51 files changed, 81520 insertions, 0 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/brcm80211/brcmsmac/Makefile new file mode 100644 index 00000000000..c2eb2d0af38 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile @@ -0,0 +1,51 @@ +# +# Makefile fragment for Broadcom 802.11n Networking Device Driver +# +# Copyright (c) 2010 Broadcom Corporation +# +# Permission to use, copy, modify, and/or distribute this software for any +# purpose with or without fee is hereby granted, provided that the above +# copyright notice and this permission notice appear in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + +ccflags-y := \ + -D__CHECK_ENDIAN__ \ + -Idrivers/net/wireless/brcm80211/brcmsmac \ + -Idrivers/net/wireless/brcm80211/brcmsmac/phy \ + -Idrivers/net/wireless/brcm80211/include + +BRCMSMAC_OFILES := \ + mac80211_if.o \ + ucode_loader.o \ + ampdu.o \ + antsel.o \ + channel.o \ + main.o \ + phy_shim.o \ + pmu.o \ + rate.o \ + stf.o \ + aiutils.o \ + phy/phy_cmn.o \ + phy/phy_lcn.o \ + phy/phy_n.o \ + phy/phytbl_lcn.o \ + phy/phytbl_n.o \ + phy/phy_qmath.o \ + otp.o \ + srom.o \ + dma.o \ + nicpci.o \ + brcms_trace_events.o + +MODULEPFX := brcmsmac + +obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o +$(MODULEPFX)-objs = $(BRCMSMAC_OFILES) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c new file mode 100644 index 00000000000..025fa0eb6f4 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -0,0 +1,2079 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * File contents: support functions for PCI/PCIe + */ + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <defs.h> +#include <chipcommon.h> +#include <brcmu_utils.h> +#include <brcm_hw_ids.h> +#include <soc.h> +#include "types.h" +#include "pub.h" +#include "pmu.h" +#include "srom.h" +#include "nicpci.h" +#include "aiutils.h" + +/* slow_clk_ctl */ + /* slow clock source mask */ +#define SCC_SS_MASK 0x00000007 + /* source of slow clock is LPO */ +#define SCC_SS_LPO 0x00000000 + /* source of slow clock is crystal */ +#define SCC_SS_XTAL 0x00000001 + /* source of slow clock is PCI */ +#define SCC_SS_PCI 0x00000002 + /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define SCC_LF 0x00000200 + /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define SCC_LP 0x00000400 + /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define SCC_FS 0x00000800 + /* IgnorePllOffReq, 1/0: + * power logic ignores/honors PLL clock disable requests from core + */ +#define SCC_IP 0x00001000 + /* XtalControlEn, 1/0: + * power logic does/doesn't disable crystal when appropriate + */ +#define SCC_XC 0x00002000 + /* XtalPU (RO), 1/0: crystal running/disabled */ +#define SCC_XP 0x00004000 + /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define SCC_CD_MASK 0xffff0000 +#define SCC_CD_SHIFT 16 + +/* system_clk_ctl */ + /* ILPen: Enable Idle Low Power */ +#define SYCC_IE 0x00000001 + /* ALPen: Enable Active Low Power */ +#define SYCC_AE 0x00000002 + /* ForcePLLOn */ +#define SYCC_FP 0x00000004 + /* Force ALP (or HT if ALPen is not set */ +#define SYCC_AR 0x00000008 + /* Force HT */ +#define SYCC_HR 0x00000010 + /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ +#define SYCC_CD_MASK 0xffff0000 +#define SYCC_CD_SHIFT 16 + +#define CST4329_SPROM_OTP_SEL_MASK 0x00000003 + /* OTP is powered up, use def. CIS, no SPROM */ +#define CST4329_DEFCIS_SEL 0 + /* OTP is powered up, SPROM is present */ +#define CST4329_SPROM_SEL 1 + /* OTP is powered up, no SPROM */ +#define CST4329_OTP_SEL 2 + /* OTP is powered down, SPROM is present */ +#define CST4329_OTP_PWRDN 3 + +#define CST4329_SPI_SDIO_MODE_MASK 0x00000004 +#define CST4329_SPI_SDIO_MODE_SHIFT 2 + +/* 43224 chip-specific ChipControl register bits */ +#define CCTRL43224_GPIO_TOGGLE 0x8000 + /* 12 mA drive strength */ +#define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 + /* 12 mA drive strength for later 43224s */ +#define CCTRL_43224B0_12MA_LED_DRIVE 0xF0 + +/* 43236 Chip specific ChipStatus register bits */ +#define CST43236_SFLASH_MASK 0x00000040 +#define CST43236_OTP_MASK 0x00000080 +#define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */ +#define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */ +#define CST43236_BOOT_MASK 0x00001800 +#define CST43236_BOOT_SHIFT 11 +#define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ +#define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */ +#define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */ +#define CST43236_BOOT_FROM_INVALID 3 + +/* 4331 chip-specific ChipControl register bits */ + /* 0 disable */ +#define CCTRL4331_BT_COEXIST (1<<0) + /* 0 SECI is disabled (JTAG functional) */ +#define CCTRL4331_SECI (1<<1) + /* 0 disable */ +#define CCTRL4331_EXT_LNA (1<<2) + /* sprom/gpio13-15 mux */ +#define CCTRL4331_SPROM_GPIO13_15 (1<<3) + /* 0 ext pa disable, 1 ext pa enabled */ +#define CCTRL4331_EXTPA_EN (1<<4) + /* set drive out GPIO_CLK on sprom_cs pin */ +#define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) + /* use sprom_cs pin as PCIE mdio interface */ +#define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) + /* aband extpa will be at gpio2/5 and sprom_dout */ +#define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) + /* override core control on pipe_AuxClkEnable */ +#define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) + /* override core control on pipe_AuxPowerDown */ +#define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) + /* pcie_auxclkenable */ +#define CCTRL4331_PCIE_AUXCLKEN (1<<10) + /* pcie_pipe_pllpowerdown */ +#define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) + /* enable bt_shd0 at gpio4 */ +#define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) + /* enable bt_shd1 at gpio5 */ +#define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) + +/* 4331 Chip specific ChipStatus register bits */ + /* crystal frequency 20/40Mhz */ +#define CST4331_XTAL_FREQ 0x00000001 +#define CST4331_SPROM_PRESENT 0x00000002 +#define CST4331_OTP_PRESENT 0x00000004 +#define CST4331_LDO_RF 0x00000008 +#define CST4331_LDO_PAR 0x00000010 + +/* 4319 chip-specific ChipStatus register bits */ +#define CST4319_SPI_CPULESSUSB 0x00000001 +#define CST4319_SPI_CLK_POL 0x00000002 +#define CST4319_SPI_CLK_PH 0x00000008 + /* gpio [7:6], SDIO CIS selection */ +#define CST4319_SPROM_OTP_SEL_MASK 0x000000c0 +#define CST4319_SPROM_OTP_SEL_SHIFT 6 + /* use default CIS, OTP is powered up */ +#define CST4319_DEFCIS_SEL 0x00000000 + /* use SPROM, OTP is powered up */ +#define CST4319_SPROM_SEL 0x00000040 + /* use OTP, OTP is powered up */ +#define CST4319_OTP_SEL 0x00000080 + /* use SPROM, OTP is powered down */ +#define CST4319_OTP_PWRDN 0x000000c0 + /* gpio [8], sdio/usb mode */ +#define CST4319_SDIO_USB_MODE 0x00000100 +#define CST4319_REMAP_SEL_MASK 0x00000600 +#define CST4319_ILPDIV_EN 0x00000800 +#define CST4319_XTAL_PD_POL 0x00001000 +#define CST4319_LPO_SEL 0x00002000 +#define CST4319_RES_INIT_MODE 0x0000c000 + /* PALDO is configured with external PNP */ +#define CST4319_PALDO_EXTPNP 0x00010000 +#define CST4319_CBUCK_MODE_MASK 0x00060000 +#define CST4319_CBUCK_MODE_BURST 0x00020000 +#define CST4319_CBUCK_MODE_LPBURST 0x00060000 +#define CST4319_RCAL_VALID 0x01000000 +#define CST4319_RCAL_VALUE_MASK 0x3e000000 +#define CST4319_RCAL_VALUE_SHIFT 25 + +/* 4336 chip-specific ChipStatus register bits */ +#define CST4336_SPI_MODE_MASK 0x00000001 +#define CST4336_SPROM_PRESENT 0x00000002 +#define CST4336_OTP_PRESENT 0x00000004 +#define CST4336_ARMREMAP_0 0x00000008 +#define CST4336_ILPDIV_EN_MASK 0x00000010 +#define CST4336_ILPDIV_EN_SHIFT 4 +#define CST4336_XTAL_PD_POL_MASK 0x00000020 +#define CST4336_XTAL_PD_POL_SHIFT 5 +#define CST4336_LPO_SEL_MASK 0x00000040 +#define CST4336_LPO_SEL_SHIFT 6 +#define CST4336_RES_INIT_MODE_MASK 0x00000180 +#define CST4336_RES_INIT_MODE_SHIFT 7 +#define CST4336_CBUCK_MODE_MASK 0x00000600 +#define CST4336_CBUCK_MODE_SHIFT 9 + +/* 4313 chip-specific ChipStatus register bits */ +#define CST4313_SPROM_PRESENT 1 +#define CST4313_OTP_PRESENT 2 +#define CST4313_SPROM_OTP_SEL_MASK 0x00000002 +#define CST4313_SPROM_OTP_SEL_SHIFT 0 + +/* 4313 Chip specific ChipControl register bits */ + /* 12 mA drive strengh for later 4313 */ +#define CCTRL_4313_12MA_LED_DRIVE 0x00000007 + +/* Manufacturer Ids */ +#define MFGID_ARM 0x43b +#define MFGID_BRCM 0x4bf +#define MFGID_MIPS 0x4a7 + +/* Enumeration ROM registers */ +#define ER_EROMENTRY 0x000 +#define ER_REMAPCONTROL 0xe00 +#define ER_REMAPSELECT 0xe04 +#define ER_MASTERSELECT 0xe10 +#define ER_ITCR 0xf00 +#define ER_ITIP 0xf04 + +/* Erom entries */ +#define ER_TAG 0xe +#define ER_TAG1 0x6 +#define ER_VALID 1 +#define ER_CI 0 +#define ER_MP 2 +#define ER_ADD 4 +#define ER_END 0xe +#define ER_BAD 0xffffffff + +/* EROM CompIdentA */ +#define CIA_MFG_MASK 0xfff00000 +#define CIA_MFG_SHIFT 20 +#define CIA_CID_MASK 0x000fff00 +#define CIA_CID_SHIFT 8 +#define CIA_CCL_MASK 0x000000f0 +#define CIA_CCL_SHIFT 4 + +/* EROM CompIdentB */ +#define CIB_REV_MASK 0xff000000 +#define CIB_REV_SHIFT 24 +#define CIB_NSW_MASK 0x00f80000 +#define CIB_NSW_SHIFT 19 +#define CIB_NMW_MASK 0x0007c000 +#define CIB_NMW_SHIFT 14 +#define CIB_NSP_MASK 0x00003e00 +#define CIB_NSP_SHIFT 9 +#define CIB_NMP_MASK 0x000001f0 +#define CIB_NMP_SHIFT 4 + +/* EROM AddrDesc */ +#define AD_ADDR_MASK 0xfffff000 +#define AD_SP_MASK 0x00000f00 +#define AD_SP_SHIFT 8 +#define AD_ST_MASK 0x000000c0 +#define AD_ST_SHIFT 6 +#define AD_ST_SLAVE 0x00000000 +#define AD_ST_BRIDGE 0x00000040 +#define AD_ST_SWRAP 0x00000080 +#define AD_ST_MWRAP 0x000000c0 +#define AD_SZ_MASK 0x00000030 +#define AD_SZ_SHIFT 4 +#define AD_SZ_4K 0x00000000 +#define AD_SZ_8K 0x00000010 +#define AD_SZ_16K 0x00000020 +#define AD_SZ_SZD 0x00000030 +#define AD_AG32 0x00000008 +#define AD_ADDR_ALIGN 0x00000fff +#define AD_SZ_BASE 0x00001000 /* 4KB */ + +/* EROM SizeDesc */ +#define SD_SZ_MASK 0xfffff000 +#define SD_SG32 0x00000008 +#define SD_SZ_ALIGN 0x00000fff + +/* PCI config space bit 4 for 4306c0 slow clock source */ +#define PCI_CFG_GPIO_SCS 0x10 +/* PCI config space GPIO 14 for Xtal power-up */ +#define PCI_CFG_GPIO_XTAL 0x40 +/* PCI config space GPIO 15 for PLL power-down */ +#define PCI_CFG_GPIO_PLL 0x80 + +/* power control defines */ +#define PLL_DELAY 150 /* us pll on delay */ +#define FREF_DELAY 200 /* us fref change delay */ +#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + +/* resetctrl */ +#define AIRC_RESET 1 + +#define NOREV -1 /* Invalid rev */ + +/* GPIO Based LED powersave defines */ +#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ +#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ + +/* When Srom support present, fields in sromcontrol */ +#define SRC_START 0x80000000 +#define SRC_BUSY 0x80000000 +#define SRC_OPCODE 0x60000000 +#define SRC_OP_READ 0x00000000 +#define SRC_OP_WRITE 0x20000000 +#define SRC_OP_WRDIS 0x40000000 +#define SRC_OP_WREN 0x60000000 +#define SRC_OTPSEL 0x00000010 +#define SRC_LOCK 0x00000008 +#define SRC_SIZE_MASK 0x00000006 +#define SRC_SIZE_1K 0x00000000 +#define SRC_SIZE_4K 0x00000002 +#define SRC_SIZE_16K 0x00000004 +#define SRC_SIZE_SHIFT 1 +#define SRC_PRESENT 0x00000001 + +/* External PA enable mask */ +#define GPIO_CTRL_EPA_EN_MASK 0x40 + +#define DEFAULT_GPIOTIMERVAL \ + ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) + +#define BADIDX (SI_MAXCORES + 1) + +/* Newer chips can access PCI/PCIE and CC core without requiring to change + * PCI BAR0 WIN + */ +#define SI_FAST(si) (((si)->pub.buscoretype == PCIE_CORE_ID) || \ + (((si)->pub.buscoretype == PCI_CORE_ID) && \ + (si)->pub.buscorerev >= 13)) + +#define CCREGS_FAST(si) (((char __iomem *)((si)->curmap) + \ + PCI_16KB0_CCREGS_OFFSET)) + +#define IS_SIM(chippkg) \ + ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) + +/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts + * before after core switching to avoid invalid register accesss inside ISR. + */ +#define INTR_OFF(si, intr_val) \ + if ((si)->intrsoff_fn && \ + (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ + intr_val = (*(si)->intrsoff_fn)((si)->intr_arg) + +#define INTR_RESTORE(si, intr_val) \ + if ((si)->intrsrestore_fn && \ + (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val) + +#define PCI(si) ((si)->pub.buscoretype == PCI_CORE_ID) +#define PCIE(si) ((si)->pub.buscoretype == PCIE_CORE_ID) + +#define PCI_FORCEHT(si) (PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID)) + +#ifdef BCMDBG +#define SI_MSG(args) printk args +#else +#define SI_MSG(args) +#endif /* BCMDBG */ + +#define GOODCOREADDR(x, b) \ + (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \ + IS_ALIGNED((x), SI_CORE_SIZE)) + +#define PCIEREGS(si) ((__iomem char *)((si)->curmap) + \ + PCI_16KB0_PCIREGS_OFFSET) + +struct aidmp { + u32 oobselina30; /* 0x000 */ + u32 oobselina74; /* 0x004 */ + u32 PAD[6]; + u32 oobselinb30; /* 0x020 */ + u32 oobselinb74; /* 0x024 */ + u32 PAD[6]; + u32 oobselinc30; /* 0x040 */ + u32 oobselinc74; /* 0x044 */ + u32 PAD[6]; + u32 oobselind30; /* 0x060 */ + u32 oobselind74; /* 0x064 */ + u32 PAD[38]; + u32 oobselouta30; /* 0x100 */ + u32 oobselouta74; /* 0x104 */ + u32 PAD[6]; + u32 oobseloutb30; /* 0x120 */ + u32 oobseloutb74; /* 0x124 */ + u32 PAD[6]; + u32 oobseloutc30; /* 0x140 */ + u32 oobseloutc74; /* 0x144 */ + u32 PAD[6]; + u32 oobseloutd30; /* 0x160 */ + u32 oobseloutd74; /* 0x164 */ + u32 PAD[38]; + u32 oobsynca; /* 0x200 */ + u32 oobseloutaen; /* 0x204 */ + u32 PAD[6]; + u32 oobsyncb; /* 0x220 */ + u32 oobseloutben; /* 0x224 */ + u32 PAD[6]; + u32 oobsyncc; /* 0x240 */ + u32 oobseloutcen; /* 0x244 */ + u32 PAD[6]; + u32 oobsyncd; /* 0x260 */ + u32 oobseloutden; /* 0x264 */ + u32 PAD[38]; + u32 oobaextwidth; /* 0x300 */ + u32 oobainwidth; /* 0x304 */ + u32 oobaoutwidth; /* 0x308 */ + u32 PAD[5]; + u32 oobbextwidth; /* 0x320 */ + u32 oobbinwidth; /* 0x324 */ + u32 oobboutwidth; /* 0x328 */ + u32 PAD[5]; + u32 oobcextwidth; /* 0x340 */ + u32 oobcinwidth; /* 0x344 */ + u32 oobcoutwidth; /* 0x348 */ + u32 PAD[5]; + u32 oobdextwidth; /* 0x360 */ + u32 oobdinwidth; /* 0x364 */ + u32 oobdoutwidth; /* 0x368 */ + u32 PAD[37]; + u32 ioctrlset; /* 0x400 */ + u32 ioctrlclear; /* 0x404 */ + u32 ioctrl; /* 0x408 */ + u32 PAD[61]; + u32 iostatus; /* 0x500 */ + u32 PAD[127]; + u32 ioctrlwidth; /* 0x700 */ + u32 iostatuswidth; /* 0x704 */ + u32 PAD[62]; + u32 resetctrl; /* 0x800 */ + u32 resetstatus; /* 0x804 */ + u32 resetreadid; /* 0x808 */ + u32 resetwriteid; /* 0x80c */ + u32 PAD[60]; + u32 errlogctrl; /* 0x900 */ + u32 errlogdone; /* 0x904 */ + u32 errlogstatus; /* 0x908 */ + u32 errlogaddrlo; /* 0x90c */ + u32 errlogaddrhi; /* 0x910 */ + u32 errlogid; /* 0x914 */ + u32 errloguser; /* 0x918 */ + u32 errlogflags; /* 0x91c */ + u32 PAD[56]; + u32 intstatus; /* 0xa00 */ + u32 PAD[127]; + u32 config; /* 0xe00 */ + u32 PAD[63]; + u32 itcr; /* 0xf00 */ + u32 PAD[3]; + u32 itipooba; /* 0xf10 */ + u32 itipoobb; /* 0xf14 */ + u32 itipoobc; /* 0xf18 */ + u32 itipoobd; /* 0xf1c */ + u32 PAD[4]; + u32 itipoobaout; /* 0xf30 */ + u32 itipoobbout; /* 0xf34 */ + u32 itipoobcout; /* 0xf38 */ + u32 itipoobdout; /* 0xf3c */ + u32 PAD[4]; + u32 itopooba; /* 0xf50 */ + u32 itopoobb; /* 0xf54 */ + u32 itopoobc; /* 0xf58 */ + u32 itopoobd; /* 0xf5c */ + u32 PAD[4]; + u32 itopoobain; /* 0xf70 */ + u32 itopoobbin; /* 0xf74 */ + u32 itopoobcin; /* 0xf78 */ + u32 itopoobdin; /* 0xf7c */ + u32 PAD[4]; + u32 itopreset; /* 0xf90 */ + u32 PAD[15]; + u32 peripherialid4; /* 0xfd0 */ + u32 peripherialid5; /* 0xfd4 */ + u32 peripherialid6; /* 0xfd8 */ + u32 peripherialid7; /* 0xfdc */ + u32 peripherialid0; /* 0xfe0 */ + u32 peripherialid1; /* 0xfe4 */ + u32 peripherialid2; /* 0xfe8 */ + u32 peripherialid3; /* 0xfec */ + u32 componentid0; /* 0xff0 */ + u32 componentid1; /* 0xff4 */ + u32 componentid2; /* 0xff8 */ + u32 componentid3; /* 0xffc */ +}; + +/* EROM parsing */ + +static u32 +get_erom_ent(struct si_pub *sih, u32 __iomem **eromptr, u32 mask, u32 match) +{ + u32 ent; + uint inv = 0, nom = 0; + + while (true) { + ent = R_REG(*eromptr); + (*eromptr)++; + + if (mask == 0) + break; + + if ((ent & ER_VALID) == 0) { + inv++; + continue; + } + + if (ent == (ER_END | ER_VALID)) + break; + + if ((ent & mask) == match) + break; + + nom++; + } + + return ent; +} + +static u32 +get_asd(struct si_pub *sih, u32 __iomem **eromptr, uint sp, uint ad, uint st, + u32 *addrl, u32 *addrh, u32 *sizel, u32 *sizeh) +{ + u32 asd, sz, szd; + + asd = get_erom_ent(sih, eromptr, ER_VALID, ER_VALID); + if (((asd & ER_TAG1) != ER_ADD) || + (((asd & AD_SP_MASK) >> AD_SP_SHIFT) != sp) || + ((asd & AD_ST_MASK) != st)) { + /* This is not what we want, "push" it back */ + (*eromptr)--; + return 0; + } + *addrl = asd & AD_ADDR_MASK; + if (asd & AD_AG32) + *addrh = get_erom_ent(sih, eromptr, 0, 0); + else + *addrh = 0; + *sizeh = 0; + sz = asd & AD_SZ_MASK; + if (sz == AD_SZ_SZD) { + szd = get_erom_ent(sih, eromptr, 0, 0); + *sizel = szd & SD_SZ_MASK; + if (szd & SD_SG32) + *sizeh = get_erom_ent(sih, eromptr, 0, 0); + } else + *sizel = AD_SZ_BASE << (sz >> AD_SZ_SHIFT); + + return asd; +} + +static void ai_hwfixup(struct si_info *sii) +{ +} + +/* parse the enumeration rom to identify all cores */ +static void ai_scan(struct si_pub *sih, struct chipcregs __iomem *cc) +{ + struct si_info *sii = (struct si_info *)sih; + + u32 erombase; + u32 __iomem *eromptr, *eromlim; + void __iomem *regs = cc; + + erombase = R_REG(&cc->eromptr); + + /* Set wrappers address */ + sii->curwrap = (void *)((unsigned long)cc + SI_CORE_SIZE); + + /* Now point the window at the erom */ + pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, erombase); + eromptr = regs; + eromlim = eromptr + (ER_REMAPCONTROL / sizeof(u32)); + + while (eromptr < eromlim) { + u32 cia, cib, cid, mfg, crev, nmw, nsw, nmp, nsp; + u32 mpd, asd, addrl, addrh, sizel, sizeh; + u32 __iomem *base; + uint i, j, idx; + bool br; + + br = false; + + /* Grok a component */ + cia = get_erom_ent(sih, &eromptr, ER_TAG, ER_CI); + if (cia == (ER_END | ER_VALID)) { + /* Found END of erom */ + ai_hwfixup(sii); + return; + } + base = eromptr - 1; + cib = get_erom_ent(sih, &eromptr, 0, 0); + + if ((cib & ER_TAG) != ER_CI) { + /* CIA not followed by CIB */ + goto error; + } + + cid = (cia & CIA_CID_MASK) >> CIA_CID_SHIFT; + mfg = (cia & CIA_MFG_MASK) >> CIA_MFG_SHIFT; + crev = (cib & CIB_REV_MASK) >> CIB_REV_SHIFT; + nmw = (cib & CIB_NMW_MASK) >> CIB_NMW_SHIFT; + nsw = (cib & CIB_NSW_MASK) >> CIB_NSW_SHIFT; + nmp = (cib & CIB_NMP_MASK) >> CIB_NMP_SHIFT; + nsp = (cib & CIB_NSP_MASK) >> CIB_NSP_SHIFT; + + if (((mfg == MFGID_ARM) && (cid == DEF_AI_COMP)) || (nsp == 0)) + continue; + if ((nmw + nsw == 0)) { + /* A component which is not a core */ + if (cid == OOB_ROUTER_CORE_ID) { + asd = get_asd(sih, &eromptr, 0, 0, AD_ST_SLAVE, + &addrl, &addrh, &sizel, &sizeh); + if (asd != 0) + sii->oob_router = addrl; + } + continue; + } + + idx = sii->numcores; +/* sii->eromptr[idx] = base; */ + sii->cia[idx] = cia; + sii->cib[idx] = cib; + sii->coreid[idx] = cid; + |