diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmsmac/pmu.c')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/pmu.c | 323 |
1 files changed, 15 insertions, 308 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c index 3b36e3acfd7..71b80381f3a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c @@ -23,6 +23,7 @@ #include "pub.h" #include "aiutils.h" #include "pmu.h" +#include "soc.h" /* * external LPO crystal frequency @@ -73,16 +74,6 @@ * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary * number to differentiate different PLLs controlled by the same PMU rev. */ -/* pllcontrol registers: - * ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, - * p1div, p2div, _bypass_sdmod - */ -#define PMU1_PLL0_PLLCTL0 0 -#define PMU1_PLL0_PLLCTL1 1 -#define PMU1_PLL0_PLLCTL2 2 -#define PMU1_PLL0_PLLCTL3 3 -#define PMU1_PLL0_PLLCTL4 4 -#define PMU1_PLL0_PLLCTL5 5 /* pmu XtalFreqRatio */ #define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF @@ -107,109 +98,14 @@ #define RES4313_HT_AVAIL_RSRC 14 #define RES4313_MACPHY_CLK_AVAIL_RSRC 15 -/* Determine min/max rsrc masks. Value 0 leaves hardware at default. */ -static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax) -{ - u32 min_mask = 0, max_mask = 0; - uint rsrcs; - - /* # resources */ - rsrcs = (sih->pmucaps & PCAP_RC_MASK) >> PCAP_RC_SHIFT; - - /* determine min/max rsrc masks */ - switch (sih->chip) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - /* ??? */ - break; - - case BCM4313_CHIP_ID: - min_mask = PMURES_BIT(RES4313_BB_PU_RSRC) | - PMURES_BIT(RES4313_XTAL_PU_RSRC) | - PMURES_BIT(RES4313_ALP_AVAIL_RSRC) | - PMURES_BIT(RES4313_BB_PLL_PWRSW_RSRC); - max_mask = 0xffff; - break; - default: - break; - } - - *pmin = min_mask; - *pmax = max_mask; -} - -static void -si_pmu_spuravoid_pllupdate(struct si_pub *sih, struct chipcregs __iomem *cc, - u8 spuravoid) -{ - u32 tmp = 0; - - switch (sih->chip) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - if (spuravoid == 1) { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11500010); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x000C0C06); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x0F600a08); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - W_REG(&cc->pllcontrol_data, 0x00000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x2001E920); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888815); - } else { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11100010); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x000c0c06); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x03000a08); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - W_REG(&cc->pllcontrol_data, 0x00000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x200005c0); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888815); - } - tmp = 1 << 10; - break; - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11100008); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x0c000c06); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x03000a08); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - W_REG(&cc->pllcontrol_data, 0x00000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x200005c0); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888855); - - tmp = 1 << 10; - break; - - default: - /* bail out */ - return; - } - - tmp |= R_REG(&cc->pmucontrol); - W_REG(&cc->pmucontrol, tmp); -} - u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) { uint delay = PMU_MAX_TRANSITION_DLY; - switch (sih->chip) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - case BCM4313_CHIP_ID: + switch (ai_get_chip_id(sih)) { + case BCMA_CHIP_ID_BCM43224: + case BCMA_CHIP_ID_BCM43225: + case BCMA_CHIP_ID_BCM4313: delay = 3700; break; default: @@ -219,226 +115,40 @@ u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) return (u16) delay; } -void si_pmu_sprom_enable(struct si_pub *sih, bool enable) -{ - struct chipcregs __iomem *cc; - uint origidx; - - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} - -/* Read/write a chipcontrol reg */ -u32 si_pmu_chipcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val) -{ - ai_corereg(sih, SI_CC_IDX, offsetof(struct chipcregs, chipcontrol_addr), - ~0, reg); - return ai_corereg(sih, SI_CC_IDX, - offsetof(struct chipcregs, chipcontrol_data), mask, - val); -} - -/* Read/write a regcontrol reg */ -u32 si_pmu_regcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val) -{ - ai_corereg(sih, SI_CC_IDX, offsetof(struct chipcregs, regcontrol_addr), - ~0, reg); - return ai_corereg(sih, SI_CC_IDX, - offsetof(struct chipcregs, regcontrol_data), mask, - val); -} - -/* Read/write a pllcontrol reg */ -u32 si_pmu_pllcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val) -{ - ai_corereg(sih, SI_CC_IDX, offsetof(struct chipcregs, pllcontrol_addr), - ~0, reg); - return ai_corereg(sih, SI_CC_IDX, - offsetof(struct chipcregs, pllcontrol_data), mask, - val); -} - -/* PMU PLL update */ -void si_pmu_pllupd(struct si_pub *sih) -{ - ai_corereg(sih, SI_CC_IDX, offsetof(struct chipcregs, pmucontrol), - PCTL_PLL_PLLCTL_UPD, PCTL_PLL_PLLCTL_UPD); -} - -/* query alp/xtal clock frequency */ -u32 si_pmu_alp_clock(struct si_pub *sih) -{ - u32 clock = ALP_CLOCK; - - /* bail out with default */ - if (!(sih->cccaps & CC_CAP_PMU)) - return clock; - - switch (sih->chip) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - case BCM4313_CHIP_ID: - /* always 20Mhz */ - clock = 20000 * 1000; - break; - default: - break; - } - - return clock; -} - -void si_pmu_spuravoid(struct si_pub *sih, u8 spuravoid) -{ - struct chipcregs __iomem *cc; - uint origidx, intr_val; - - /* Remember original core before switch to chipc */ - cc = (struct chipcregs __iomem *) - ai_switch_core(sih, CC_CORE_ID, &origidx, &intr_val); - - /* update the pll changes */ - si_pmu_spuravoid_pllupdate(sih, cc, spuravoid); - - /* Return to original core */ - ai_restore_core(sih, origidx, intr_val); -} - -/* initialize PMU */ -void si_pmu_init(struct si_pub *sih) -{ - struct chipcregs __iomem *cc; - uint origidx; - - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - if (sih->pmurev == 1) - AND_REG(&cc->pmucontrol, ~PCTL_NOILP_ON_WAIT); - else if (sih->pmurev >= 2) - OR_REG(&cc->pmucontrol, PCTL_NOILP_ON_WAIT); - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} - -/* initialize PMU chip controls and other chip level stuff */ -void si_pmu_chip_init(struct si_pub *sih) -{ - uint origidx; - - /* Gate off SPROM clock and chip select signals */ - si_pmu_sprom_enable(sih, false); - - /* Remember original core */ - origidx = ai_coreidx(sih); - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} - -/* initialize PMU switch/regulators */ -void si_pmu_swreg_init(struct si_pub *sih) -{ -} - -/* initialize PLL */ -void si_pmu_pll_init(struct si_pub *sih, uint xtalfreq) -{ - struct chipcregs __iomem *cc; - uint origidx; - - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - switch (sih->chip) { - case BCM4313_CHIP_ID: - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - /* ??? */ - break; - default: - break; - } - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} - -/* initialize PMU resources */ -void si_pmu_res_init(struct si_pub *sih) -{ - struct chipcregs __iomem *cc; - uint origidx; - u32 min_mask = 0, max_mask = 0; - - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - /* Determine min/max rsrc masks */ - si_pmu_res_masks(sih, &min_mask, &max_mask); - - /* It is required to program max_mask first and then min_mask */ - - /* Program max resource mask */ - - if (max_mask) - W_REG(&cc->max_res_mask, max_mask); - - /* Program min resource mask */ - - if (min_mask) - W_REG(&cc->min_res_mask, min_mask); - - /* Add some delay; allow resources to come up and settle. */ - mdelay(2); - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} - u32 si_pmu_measure_alpclk(struct si_pub *sih) { - struct chipcregs __iomem *cc; - uint origidx; + struct si_info *sii = container_of(sih, struct si_info, pub); + struct bcma_device *core; u32 alp_khz; - if (sih->pmurev < 10) + if (ai_get_pmurev(sih) < 10) return 0; /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); + core = sii->icbus->drv_cc.core; - if (R_REG(&cc->pmustatus) & PST_EXTLPOAVAIL) { + if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) { u32 ilp_ctr, alp_hz; /* * Enable the reg to measure the freq, * in case it was disabled before */ - W_REG(&cc->pmu_xtalfreq, - 1U << PMU_XTALFREQ_REG_MEASURE_SHIFT); + bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), + 1U << PMU_XTALFREQ_REG_MEASURE_SHIFT); /* Delay for well over 4 ILP clocks */ udelay(1000); /* Read the latched number of ALP ticks per 4 ILP ticks */ - ilp_ctr = - R_REG(&cc->pmu_xtalfreq) & PMU_XTALFREQ_REG_ILPCTR_MASK; + ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) & + PMU_XTALFREQ_REG_ILPCTR_MASK; /* * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT * bit to save power */ - W_REG(&cc->pmu_xtalfreq, 0); + bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0); /* Calculate ALP frequency */ alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4; @@ -451,8 +161,5 @@ u32 si_pmu_measure_alpclk(struct si_pub *sih) } else alp_khz = 0; - /* Return to original core */ - ai_setcoreidx(sih, origidx); - return alp_khz; } |