diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 127 |
1 files changed, 68 insertions, 59 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 2a1e5ae0c40..8933f9b31a9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -799,6 +799,7 @@ static int brcmf_netdev_open(struct net_device *ndev) struct brcmf_bus *bus_if = drvr->bus_if; u32 toe_ol; s32 ret = 0; + uint up = 0; brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx); @@ -822,6 +823,10 @@ static int brcmf_netdev_open(struct net_device *ndev) drvr->iflist[ifp->idx]->ndev->features &= ~NETIF_F_IP_CSUM; } + + /* make sure RF is ready for work */ + brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up)); + /* Allow transmit calls */ netif_start_queue(ndev); drvr->bus_if->drvr_up = true; @@ -843,6 +848,63 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_set_rx_mode = brcmf_netdev_set_multicast_list }; +static int brcmf_net_attach(struct brcmf_if *ifp) +{ + struct brcmf_pub *drvr = ifp->drvr; + struct net_device *ndev; + u8 temp_addr[ETH_ALEN]; + + brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx); + + ndev = drvr->iflist[ifp->idx]->ndev; + ndev->netdev_ops = &brcmf_netdev_ops_pri; + + /* + * determine mac address to use + */ + if (is_valid_ether_addr(ifp->mac_addr)) + memcpy(temp_addr, ifp->mac_addr, ETH_ALEN); + else + memcpy(temp_addr, drvr->mac, ETH_ALEN); + + if (ifp->idx == 1) { + brcmf_dbg(TRACE, "ACCESS POINT MAC:\n"); + /* ACCESSPOINT INTERFACE CASE */ + temp_addr[0] |= 0X02; /* set bit 2 , + - Locally Administered address */ + + } + ndev->hard_header_len = ETH_HLEN + drvr->hdrlen; + ndev->ethtool_ops = &brcmf_ethtool_ops; + + drvr->rxsz = ndev->mtu + ndev->hard_header_len + + drvr->hdrlen; + + memcpy(ndev->dev_addr, temp_addr, ETH_ALEN); + + /* attach to cfg80211 for primary interface */ + if (!ifp->idx) { + drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr); + if (drvr->config == NULL) { + brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n"); + goto fail; + } + } + + if (register_netdev(ndev) != 0) { + brcmf_dbg(ERROR, "couldn't register the net device\n"); + goto fail; + } + + brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + + return 0; + +fail: + ndev->netdev_ops = NULL; + return -EBADE; +} + int brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr) { @@ -882,7 +944,7 @@ brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr) if (mac_addr != NULL) memcpy(&ifp->mac_addr, mac_addr, ETH_ALEN); - if (brcmf_net_attach(drvr, ifp->idx)) { + if (brcmf_net_attach(ifp)) { brcmf_dbg(ERROR, "brcmf_net_attach failed"); free_netdev(ifp->ndev); drvr->iflist[ifidx] = NULL; @@ -1016,69 +1078,16 @@ int brcmf_bus_start(struct device *dev) if (ret < 0) return ret; + /* add primary networking interface */ + ret = brcmf_add_if(dev, 0, "wlan%d", drvr->mac); + if (ret < 0) + return ret; + /* signal bus ready */ bus_if->state = BRCMF_BUS_DATA; return 0; } -int brcmf_net_attach(struct brcmf_pub *drvr, int ifidx) -{ - struct net_device *ndev; - u8 temp_addr[ETH_ALEN] = { - 0x00, 0x90, 0x4c, 0x11, 0x22, 0x33}; - - brcmf_dbg(TRACE, "ifidx %d\n", ifidx); - - ndev = drvr->iflist[ifidx]->ndev; - ndev->netdev_ops = &brcmf_netdev_ops_pri; - - /* - * We have to use the primary MAC for virtual interfaces - */ - if (ifidx != 0) { - /* for virtual interfaces use the primary MAC */ - memcpy(temp_addr, drvr->mac, ETH_ALEN); - - } - - if (ifidx == 1) { - brcmf_dbg(TRACE, "ACCESS POINT MAC:\n"); - /* ACCESSPOINT INTERFACE CASE */ - temp_addr[0] |= 0X02; /* set bit 2 , - - Locally Administered address */ - - } - ndev->hard_header_len = ETH_HLEN + drvr->hdrlen; - ndev->ethtool_ops = &brcmf_ethtool_ops; - - drvr->rxsz = ndev->mtu + ndev->hard_header_len + - drvr->hdrlen; - - memcpy(ndev->dev_addr, temp_addr, ETH_ALEN); - - /* attach to cfg80211 for primary interface */ - if (!ifidx) { - drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr); - if (drvr->config == NULL) { - brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n"); - goto fail; - } - } - - if (register_netdev(ndev) != 0) { - brcmf_dbg(ERROR, "couldn't register the net device\n"); - goto fail; - } - - brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); - - return 0; - -fail: - ndev->netdev_ops = NULL; - return -EBADE; -} - static void brcmf_bus_detach(struct brcmf_pub *drvr) { brcmf_dbg(TRACE, "Enter\n"); |